Supero X10SBA-V User manual

X10SBA
X10SBA-L
X10SBA-V
USER’S MANUAL
Revision 1.0c

The information in this user’s manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and docu-
mentation, is the property of Supermicro and/or its licensors, and is supplied only under a license.
Any use or reproduction of this product is not allowed, except as expressly permitted by the terms
of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
FCC Statement: This equipment has been tested and found to comply with the limits for a class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not installed and used in accordance with the instruc-
tions, may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful interfer-
ence to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver
is connected.
• Consult the authorized dealer or an experienced radio/TV technician for help.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate warn-
ing applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to the
State of California to cause birth defects and other repro-
ductive harm.
Manual Revision 1.0c
Release Date: December 4, 2019
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2019 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America

iii
Preface
Preface
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides information for the installation and use of the
X10SBA/-L/-V motherboard.
About This Motherboard
The X10SBA/-L/-V supports the next-generation Intel®Celeron J1900
SoC (System on a Chip) 22nm Quad-Core processor in the BGA 1170 format.
With a 64-bit, 22nm, low-power Tri-gate Quad Core Silvermont processor built into
it, the X10SBA(-L) motherboard offers unprecedented enhancements in system
performance, power efciency, and visual/media capability. This motherboard is
ideal for SMB entry-level Storage, Server, or Appliance platforms that are optimized
for networking, thin-client, Kiosk, Digital Signage, and control-box applications.
Please refer to our website (http://www.supermicro.com/products/) for processor
and memory support updates. This product is intended to be installed and serviced
by professional technicians.
Manual Organization
Chapter 1 describes the features, specications and performance of the mother-
board, and provides detailed information on the Intel Celeron Bay Trail processor
platform.
Chapter 2 provides hardware installation instructions. Read this chapter when in-
stalling the processor, memory modules and other hardware components into the
system. If you encounter any problems, see Chapter 3, which describes trouble-
shooting procedures for video, memory and system setup stored in the CMOS.
Chapter 4 includes an introduction to the BIOS, and provides detailed information
on running the CMOS Setup utility.
Appendix A provides BIOS Error Beep Codes.
Appendix B lists software program installation instructions.
Appendix C contains UEFI BIOS Recovery instructions.
Appendix D contains Dual Boot Block instructions.

iv
Conventions Used in the Manual:
Special attention should be given to the following symbols for proper installation and
to prevent damage done to the components or injury to yourself:
Warning: Critical information to prevent damage to the components or injury to your-
self.
Important: Important information is given to ensure proper system instal-
lation or to relay safety precautions.
Note: Additional Information is provided for correct system setup.
X10SBA/-L/-V User’s Manual

v
Contacting Supermicro
Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: [phone]
Fax: [phone]
Email: [email protected] (General Information)
[email protected] (Technical Support)
Website: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: [phone]
Fax: [phone]
Email: [email protected] (General Information)
[email protected] (Technical Support)
[email protected] (Customer Support)
Website: www.supermicro.nl
Asia-Pacic
Address: Super Micro Computer, Inc.
3F, No. 150, Jian 1st Rd.
Zhonghe Dist., New Taipei City 235
Taiwan (R.O.C)
Tel: [phone]
Fax: [phone]
Email: [email protected]
Website: www.supermicro.com.tw

vi
Table of Contents
Preface
About This Motherboard................................................................................................iii
Manual Organization .....................................................................................................iii
Conventions Used in the Manual:.................................................................................iv
Contacting Supermicro...................................................................................................v
Chapter 1 Introduction
1-1 Overview ......................................................................................................... 1-1
Checklist.......................................................................................................... 1-1
Motherboard Features..................................................................................... 1-7
1-2 Processor Overview ..................................................................................... 1-10
1-3 Special Features ............................................................................................1-11
Recovery from AC Power Loss......................................................................1-11
1-4 PC Health Monitoring.....................................................................................1-11
Fan Status Monitor with Firmware Control ...................................................1-11
Environmental Temperature Control ..............................................................1-11
System Resource Alert ..................................................................................1-11
1-5 ACPI Features............................................................................................... 1-12
Slow Blinking LED for Suspend-State Indicator ........................................... 1-12
1-6 Power Supply ................................................................................................ 1-12
1-7 Super I/O....................................................................................................... 1-12
Chapter 2 Installation
2-1 Standardized Warning Statements ................................................................. 2-1
Battery Handling.............................................................................................. 2-1
Product Disposal ............................................................................................. 2-3
2-2 Static-Sensitive Devices.................................................................................. 2-4
Precautions ..................................................................................................... 2-4
Unpacking ....................................................................................................... 2-4
2-3 Memory Support.............................................................................................. 2-5
Memory Population Guidelines ....................................................................... 2-5
Populating Memory Modules........................................................................... 2-6
Installing a SO-DIMM Module into a Horizontal Socket ................................. 2-7
Removing a SO-DIMM Module from the Socket ............................................ 2-7
2-4 Motherboard Installation.................................................................................. 2-8
Tools Needed .................................................................................................. 2-8
Location of Mounting Holes ............................................................................ 2-8
Installing the Motherboard .............................................................................. 2-9
X10SBA/-L/-V User’s Manual

vii
Table of Contents
2-5 Connectors/IO Ports...................................................................................... 2-10
I/O Back Panel .............................................................................................. 2-10
Universal Serial Bus (USB).......................................................................2-11
Ethernet Ports .......................................................................................... 2-12
HDMI & DP Ports ..................................................................................... 2-12
Video Connector....................................................................................... 2-13
Embedded DisplayPort (eDP) .................................................................. 2-14
Front Control Panel....................................................................................... 2-15
Front Control Panel Pin Denitions............................................................... 2-16
Power LED .............................................................................................. 2-16
HDD LED.................................................................................................. 2-16
NIC1/NIC2 (LAN1/LAN2).......................................................................... 2-17
Overheat (OH)/Fan Fail............................................................................ 2-17
Reset Button ........................................................................................... 2-18
Power Button ........................................................................................... 2-18
2-6 Connecting Cables........................................................................................ 2-19
ATX PWR & 12V DC PWR Connectors (JPW1 & PJ1)........................... 2-19
DOM PWR Connector (JSD1).................................................................. 2-20
Fan Headers (Fan 1/Fan 2) ..................................................................... 2-20
Internal Buzzer (SP1)............................................................................... 2-21
Power LED/Speaker................................................................................. 2-21
Serial Ports (COM1-COM4) ..................................................................... 2-22
Front Accessible Audio Header................................................................ 2-22
TPM Header/Port 80 Header ................................................................... 2-23
SPDIF_OUT (JSPDIF_OUT) .................................................................... 2-23
SMBUS1................................................................................................... 2-24
Overheat/Fan Fail LED ............................................................................ 2-24
GPIO Header (JP1).................................................................................. 2-25
2-7 Jumper Settings ............................................................................................ 2-26
Explanation of Jumpers ................................................................................ 2-26
Audio Enable (JPAC1).............................................................................. 2-26
CMOS Clear ............................................................................................. 2-27
Manufacture Mode Select ........................................................................ 2-27
USB Wake Up .......................................................................................... 2-28
2-8 Onboard Indicators........................................................................................ 2-29
LAN 1/LAN 2 LEDs .................................................................................. 2-29
Main Power LED ..................................................................................... 2-30
Standby Power LED ................................................................................ 2-30

viii
2-9 SATA Connections......................................................................................... 2-31
SATA 2.0 & SATA 3.0 Connections .......................................................... 2-31
Chapter 3 Troubleshooting
3-1 Troubleshooting Procedures ........................................................................... 3-1
Before Power On ............................................................................................ 3-1
No Power ........................................................................................................ 3-1
No Video ......................................................................................................... 3-2
Memory Errors ............................................................................................... 3-2
Losing the System’s Setup Conguration....................................................... 3-2
3-2 Technical Support Procedures ........................................................................ 3-3
3-3 Frequently Asked Questions ........................................................................... 3-4
3-4 Battery Removal and Installation .................................................................... 3-5
Battery Removal.............................................................................................. 3-5
Proper Battery Disposal .................................................................................. 3-5
3-5 Returning Merchandise for Service................................................................. 3-6
Battery Installation........................................................................................... 3-6
Chapter 4 UEFI BIOS
4-1 Introduction...................................................................................................... 4-1
4-2 Main Setup ...................................................................................................... 4-2
4-3 Advanced Setup Congurations...................................................................... 4-4
4-4 Security Settings ........................................................................................... 4-22
4-5 Boot Settings................................................................................................. 4-25
4-6 Save & Exit ................................................................................................... 4-27
Appendix A BIOS Error Beep Codes
A-1 BIOS Error Beep Codes .................................................................................A-1
Appendix B Software Installation Instructions
B-1 Installing Drivers..............................................................................................B-1
B-2 Conguring SuperDoctor 5 .............................................................................B-2
Appendix C UEFI BIOS Recovery Instructions
C-1 An Overview to the UEFI BIOS ......................................................................C-1
C-2 How to Recover the UEFI BIOS Image (the Main BIOS Block).....................C-1
C-3 To Recover the Main BIOS Block Using a USB-Attached Device..................C-1
Appendix D Dual Boot Block
D-1 Introduction......................................................................................................D-1
BIOS Boot Block .............................................................................................D-1
BIOS Boot Block Corruption Occurrence ......................................................D-1
D-2 Steps to Reboot the System by Using Jumper JBR1 ...................................D-2
X10SBA/-L/-V User’s Manual

Chapter 1: Introduction
1-1
Chapter 1
Introduction
1-1 Overview
Checklist
Congratulations on purchasing your computer motherboard from an acknowledged
leader in the industry. Supermicro boards are designed with the utmost attention to
detail to provide you with the highest standards in quality and performance.
Please check that the following items have all been included with your motherboard.
If anything listed here is damaged or missing, contact your retailer.
The following items are included in the retail box:
• One (1) Supermicro Motherboard
• Six (6) SATA cables (for X10SBA/-V)
• Two (2) SATA cables (for X10SBA-L)
• One (1) I/O shield
• One (1) Quick Reference Guide
Note: For your system to work properly, please follow the links below to
download all necessary drivers/utilities and the user's manual for your
motherboard.
SMCI product manuals: http://www.supermicro.com/support/manuals/
Product Drivers and utilities: https://www.supermicro.com/wftp/driver/
If you have any questions, please contact our support team at support@supermicro.
com.

1-2
X10SBA/-L/-V User’s Manual
X10SBA/-V Motherboard Image
Notes:
1. All graphics shown in this manual were based upon the latest PCB Revision
available at the time of publishing of the manual. The motherboard you've received
may or may not look exactly the same as the graphics shown in this manual.
2. Some components are installed on the X10SBA/-V only; some, on the X10SBA-
L only. Refer to the table below for model variations between these two models.
Differences between X10SBA/-V and X10SBA-L
X10SBA/-V X10SBA-L
USB (2.0) Port 3 Not available Yes
USB (2.0) Ports 4/5 Yes Not available
Type A USB (2.0) USB 6 Yes Not available
mini-PCI-E & SATA Ye s Not available
4 SATA 3.0 from Marvell
88SE9230
Yes Not available
eDP Support (X10SBA only) Yes Not available