SuperOBD SKP-100 User manual

SKP-100 User manual
1.How to use the SKP-100 to match the car keys.
SKP-100 connect to the main cable, and plug in the car's OBD diagnostic
interface.
Press [OK] to enter the menu.
http://www.carsets.co.uk/

Press [OK] to enter the vehicle selection.Press the arrow keys to select vehicles.
*The operation can be done according to the SKP-100 tips.
2.the menu HARDWARE TEST reserves , you can ignore it.
3.How to upgrade the SKP-100.
http://www.carsets.co.uk/

Connect to the computer with a USB cable and SKP-100.
4.1 Installing the SKP-100 driver
If this is the first time using the SKP-100 connect to the computer to install the
driver to normal use.
Select "Install a list or specific location (Advanced)", click "NEXT".
http://www.carsets.co.uk/

Select "Include this location in the search:", click "Browse".
Locate the folder where the disc "USB Drive", click "OK".
http://www.carsets.co.uk/

Click “Next”.
Click “Continue Anyway”.
http://www.carsets.co.uk/

Click “Finish”.
4.2 Upgrade the SKP-100.
Run the SKP-100 Upgrade Tool.
http://www.carsets.co.uk/

Click “Find Device”, If the device list is empty, reconnect SKP-100 or to install
the driver.
Click “Open Upgrade File” to Open the upgrade file from the dealer.
http://www.carsets.co.uk/

Click “Upgrade” to upgrade SKP-100.
http://www.carsets.co.uk/

Upgrade finish.
http://www.carsets.co.uk/