surg SUGR Cube User manual
www.sugrsugr.com
SUGR Cube
Keep in touch with music
SUGR Cube Exterior
MIC
Switch/Volume Control Knob
Indicator LED
Vent Tube Hole
Reset Button
Micro-USB Power Supply Port
About Charging
1. Sugr Cube is equipped with lithium battery with 6000mAh, it takes
about 4 hours to be fully charged; It is highly recommended to use
ASUC51 charger shipped with Sugr Cube to charge;
Sugr Cube could be failed to charge with other adapters.
2. When Indicator LED on the Knob turns to RED means Cube is in
low battery condition and need to be charged.
3. Under Charging
a. When Cube is on,the RED LED on the Knob will blink
continuously as a breathing light, fully charged, it will turn GREEN.
b. When Cube is off,there is no indication on the Knob.
Setup Cube Wi-Fi
Download SUGR Cube App
Please search 'sugr cube' in Apple App Store or Google Play.
sugr cube
sugr cube
sugr
14:20
GET
iOS
sugr cube
sugr cube
sugr
14:20
Installation
Android
1: Turn on Cube,make sure the indicator LED
points to 10 o'clock position
* Please charge Cube if the Indicator LED on
knob is off or turns RED.
2: Make sure your cell phone is connected to Wi-Fi.
Wi-Fi
Wi-Fi
Your Wi-Fi
14:20
3: Open SUGR Cube App, tap 'I have Cube' button.
Find Out
I have Cube
4: Enter your Wi-Fi password, then tap 'NEXT' button.
Your Wi-Fi
Wi-Fi Password
14:20
5：Tap 'Connect' button, chirp sound will come from
your cell phone. Face the speaker of cell phone to
the MIC of Cube.
Wi-Fi Configuration Success
Once Cube voices “Wi-Fi connection successful”,
Wi-Fi configuration success.
1: Make sure Cube is powered on
* Check whether the LED on knob is on, please charge Cube if not.
2: Check whether the speaker of cell phone is facing to
the MIC of Cube while doing 'chirp'.
3: Try to restart Cube then redo 'chirp' procedure.
4: Please refer to FAQ on www.sugrsugr.com for more
answers.Also you can mail support@sugrsugr.com
to get engineers' professional support.
A: It means Wi-Fi Configuration Failed if Cube voices
"Failed to connect to Wi-Fi”.You can try re-enter
Wi-Fi password and redo “chirp”procedure.
B: You may follow below steps if Cube has no response in
'chirp' procedure.
Wi-Fi Configuration Fail
SUGR Cube Operating Guidance
* More motion controllings will be available in future, please check
website: www.sugrsugr.com
Tap the top surface of Cube for
PLAY / PAUSE.
Tilt Cube left 45°~60° for
PREVIOUS.
Tilt Cube right 45°~60° for
NEXT.
Sugr Cube Function
Built-in Radios
For more information, please see the instruction on
Sugr App or check on http://www.sugrsugr.com/support
Built-in radios in Sugr App, including Pandora, BBC and more.
Cube Music
4GB FLASH memory, store your 500 favorite songs in Sugr Cube.
Relax Radio
Perfect relax radio selected by Sugr, help you get good relax and sleep.
AirPlay
Compatible with AirPlay, stream your songs to Sugr Cube.
Spotify Connect
Spotify Connect lets you control the music playing on your Sugr Cube.
Firmware Update
Continuous updates of the firmware, only for better using experiences.
Alarm
Set several alarm easily by your needs.
Sleep Timer
Sugr Cube will pause automatically according to your preset time.
The Spotify software is subject to third party licenses found here:
www.spotify.com/connect/third-party-licenses
Sugr warrants the included hardware product and accessories against defects in
materials and workmanship for one year from the date of original retail purchase. Sugr
does not warrant against normal wear and tear, nor damage caused by accident
or abuse. To obtain service, contact Sugr. Customers should bear one-way shipping
cost results from the maintenance during the warranty period.
Sugr One-Year Limited Warranty
Summary
Sugr Cube User Guide
Go to www.sugrsugr.com/support.
Safety and Handling
See “Safety, Handling, & Support” in the Sugr Cube User Guide.
Battery
The lithium-ion battery in Sugr Cube should NOT be replaced and must be recycled
or disposed of separately from household waste.
Avoiding Hearing Damage
To prevent possible hearing damage, do not listen at high volume levels for long
periods.
FCC Compliance Statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to
Sugr Cube Info
Notes：
1. Do not drop , disassemble , crush , stab , microwave or color Sugr Cube, do not
deform or insert other objects on it.
2. Do not use Sugr Cube in the rain or other damp places. Please be careful of food
and liquid spilling on Sugr Cube.
3. Do not press or stab the speaker of Sugr Cube with sharp obgects.
Important
Changes or modifications to this product not authorized by
Sugr could void the electromagnetic compatibility (EMC) and wireless
compliance and negate your authority to operate the product. This product
has demonstrated EMC compliance under conditions that included the
use of compliant peripheral devices and shielded cables between system
components. It is important that you use compliant peripheral devices and
shielded cables between system components to reduce the possibility of
causing interference to radios, televisions, and other electronic devices
© 2015 Sugr Electronics Corp. All rights reserved.
Sugr, the logo are trademarks of Sugr Electronics Corp. registered in the
U.S. and China.
radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
-- Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not expressly approved by the party responsible for
compliance could void the user's authority to operate the equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and (2)
this device must accept any interference received, including interference that may
cause undesired operation
R&TTE NB Compliance Statement
This equipment is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Use the Digital Signage in the environment with the temperature between 0°C and
40°C.
CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT
TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.
Adapter shall be installed near the equipment and shall be easily accessible.
Table of contents
