SV3C T Series User manual
Q u i c k S t a r t G u i d e
f o r
S V 3 C N V R K i t s
US Email Address: Info-us@sv3c.com
www.sv3c.com
www.sv3c.com
T Series
Content
1.Package---------------------------------------------1
2. Interface Instruction-----------------------------1
3. Hard Disk Installation----------------------------2
4. Connection View---------------------------------3
5. Product Overview--------------------------------3
6. Start System---------------------------------------4
7. IPC Configurations-------------------------------9
8. Recordings Function----------------------------10
9. System Settings---------------------------------12
10. Alarm Function----------------------------------14
11. System Maintenance--------------------------17
12. FAQ-----------------------------------------------19
13. More Information-----------------------------21
6.1 Cloud Password Settings--------------------4
6.2 Login--------------------------------------------4
6.3 Forget Password------------------------------5
6.4 User Log Out----------------------------------6
6.5 Close System----------------------------------6
6.6 Boot Wizard-----------------------------------6
7.1 Basic Functions------------------------------9
7.2 IPC Reset Factory----------------------------9
8.1 Set Recording Plan--------------------------11
8.2 Playback Recording------------------------11
8.3 Playback Control----------------------------11
10.1 Motion Detection---------------------------14
10.2 Intelligent Analysis Alarm-----------------16
www.sv3c.com
1
1.Package
POE Camera/IP Camera Ethernet(Router)
Support HD Output
(HD Monitor)
Power Adapter Ethernet Cable VGA Port
(PC Monitor) USB Port(Mouse)
1 * 8 Channel POE NVR (Built in 1T hard drive)
1 * 48V Power Adapter
1 * User manual
1 * Mouse
4 * POE Camera
4 * 20 Meters Network Cable
4 * Screws Bag
2.Interface Instruction
Please install the standard HDD (3.5inch with SATA port) inside NVR.
Step 1. Open the cover of NVR. Just remove the two screws as below
picture.
Step 2. Connect HDD cable and power line to NVR.
Step 3. Fix HDD to the back of NVR, the red dot are the four ports to
fix screws.
Step 4. Close NVR cover as step 1.
Note: You can Skip this step to test the system first if you
don't change the built-in HDD.
www.sv3c.com
2www.sv3c.com
3
Tips: Please format HDD before you start up recording.
3.Hard Disk Installation
Step 1
Step 3
Step 2
4.Connection View
5.Product Overview
This is the latest professional monitoring storage devices which
have been developed and launched by our company, adopting
Hisilicon video processing Chipset, integrating excellent video
encoder video Codec algorithm. NVR4.0 series products own
four features that are stability, ease of use, intelligence and
perfection. Our NVR use H.264, H.265, H.265+ compression
algorithm which support ultra-low code rate and super-long
cable access and embedded Linux real time operation system,
support ONVIF protocol, achieve IPC'S auto search, preview
and recording without commissioning; APP one second
connection to show picture, let our customer enjoy more
perfect experience.
POE Camera Monitor
Power
LAN Cable
VGA or HDMI
PC
Tablet
Phone
LAN Cable
POE NVR
6.Start System
Switch on the NVR power supply, then the power led will be on and the
NVR will start.
6.1 Cloud Password Settings
When NVR system starts at the first time with the access of the Internet,
the status menu displays a message which says “Inactivate: Click to
activate”, as the following picture shows:
You need to Left-click here to activate NVR by setting your own password
to ensure your NVR is online. As the following shows:
REMARKS: Your own password can only involve letters or
numbers and cannot be empty. It also cannot be set todefault
password “123456”
6.2 Login
When NVR system starts, it will search and connect IPC devices
automatically and then popup login dialog, as the following picture
Operation steps :
1.Left click “user name” select box and select user name.
Default: admin;
2.Left click “password” context box and input user name.
Default: 123456;
3.Left click “OK” button to validate your user info.
shows:
www.sv3c.com
4www.sv3c.com
5
6.3 Forget Password
Function instruction: when you forget your own system login password,
you’ll need to use this function to get a new password.
Operation steps:
1. Right click on desktop and then select “Sys.Setting” option , Wait for
NVR popup login dialog.
2. Left click on Forgot password button and turn to temporary password
window, as the following picture shows:
3. Scan the QR code with your Seetong APP to get a temporary password
consist of lower-case letters and numbers.
4. Use the temporary password to login and enter password-edit window,
as the following picture shows:
5.Reset your password.
REMARKS: The temporary password loses effectiveness when
user logged in or when it’s generated for 1 hour.
Inactivate: Click to active
6.4 User Log Out
Function instruction: Log out after you have saved the configuration in
case that unidentified user access to your NVR . You can also configure
an auto-logout parameter to log out automatically.
Operation steps: manual log out, enter system main menu---right click
---select “close system”---click on “logout” button.
Auto log out, enter main menu---right click---select “system setting”
---general, set auto log out time.
6.5 Close System
Function instruction: Reboot or shut the system down. Operation steps:
1.Left click “Quit” button in system main menu.
2.Left click “Shutdown”, the system will close.
6.6 Boot Wizard
Function instruction: Help user make a basic configuration.
Operation steps:
www.sv3c.com
6www.sv3c.com
7
Setting 2: User password settings including admin password
modification, whether to remember password and pattern unlock set.
Setting 3: Set up date format, date, time zone, daylight saving time.
Setting 1: Set up system language, menu transparency, device number,
auto logout time and whether the wizard window shows again when
reboot.
Setting 4: Network settings.
www.sv3c.com
8www.sv3c.com
9
Setting 5: Scan QR code to download Seetong app and get NVR’s
device ID.
Setting 6: HDD formatting and recording strategy.
Setting 7: List all IPC devices. Left click “OK” button to finish the wizard.
7.IPC Configurations
7.1 Basic Functions
Function instruction: Used to add, delete and modify connected
IPC devices.
7.2 IPC Reset Factory
Function instruction: IPC reset factory operation. Operation steps:
1.Select the channel you want to reset. Right-click on desktop and
select “IPC setting” sub menu.
2.Turn to IPC maintenance window.
3.Left click on “IPC reset factory” button and finish the operation.
www.sv3c.com
10 www.sv3c.com
11
8.Recordings Function
8.1 Set Recording Plan
1. Left click “recording plan” in context menu or in bottom menu,
system will open a new window as the following shows:
2. Left click “No Record” or “Regular Record” or “Motion Detect
Record” or “Motion & Regular Record” and drag to make a
recording plan you’d like. You can also click on the button on
the left to make a simple and rapid recording plan.
3. After finishing your recording plan setting, you can copy current
configuration to other channels.
Remarks: When you set current record plan to “Motion Detect
Record”, NVR will automatically record only when motion
incident happens.
When you set current record plan to “Motion & Regular Record”,
NVR will make motion record when motion incident happens
and make regular record when there’s no motion incident.
8.2 Playback Recording
Function instruction: Used to search video recording data. Operation steps:
1. Left click “playback” button in the bottom menu or in context menu,
system will open video replay window.
2. Left click calendar and date, orange color indicate that there’s video
recording data while gray indicate there’s no video recording data.
3. Select the record type, channel you want to search. There’s 3 types
of record type, common, motion, alarm. The color of Common video
is blue while alarm is red and motion is green.
4. After finishing your setting, double-click on the video recording bar
to play the video recording data.
8.3 Playback Control
Function instruction: Used to operate on video recording data, such as
playback, suspend, fast backward, smart fast backward, speed, slow,
backup, start/close audio, screenshot, full screen playback, playback
window proportion adjustment, rewind down 30s, fast forward 30s.
9.System Settings
9.1 General Setting
Function instruction: general function setting like language,
transparency, output resolution, wizard, auto log out time.
Operation steps: Left click “system setting” in context menu or
in bottom menu, system opens a new dialog as the following
picture shows:
www.sv3c.com
12 www.sv3c.com
13
9.2 Time Setting
Function instruction: set time, date format, time zone setting ,
time synchronize Operation steps:
Left click system setting in main menu or context menu, system
will open setting window, as the following picture shows:
9.3 User Setting
9.3.1 Add User
Function instruction: Used to administrate local user and
network user. Operation steps:
1.Left click “system setting” in context menu or in bottom menu.
2.Left click “user” function on the left of system setting window.
www.sv3c.com
14 www.sv3c.com
15
9.3.2 Pattern Unlock Operation Steps:
1. Left click “system setting” function in context menu and turn to
“General-User Name”, tick “Pattern unlock”.
2. Configure your own pattern lock according to the hint and confirm
your pattern lock. As the following picture shows:
10.Alarm Function
10.1 Motion Detection
Function instruction: when Motion detected, NVR will trigger motion
alarm. Operation steps:
1.Left click “system setting” in the context menu or in bottom menu.
2.Left click “Motion detection” option in system setting window,
system will open motion detection dialog. Tick off the Enable
checkbox and start motion alarm.
3.Left click “setting” button, then you’ll be able to change motion
area of IPC device.
4.Left click “alarm linkage” button, you’ll be able to configure alarm
items in the dialog.
www.sv3c.com
16 www.sv3c.com
17
10.2 Intelligent Analysis Alarm
Used to configure IPC Intelligent Analysis parameters including
Regional Invasion Alarm and Cross-Border Alarm.
10.2.1 Regional Invasion Alarm Setting
Function instruction: Used to configure Regional Invasion Alarm
parameters. Operation steps:
1.Left click “System setting” in context menu or in bottom window.
2.Left click “Alarm-Intelligent Analysis” and then turn to Regional
Invasion Alarm dialog, as the following picture shows:
10.2.2 Cross-Border Alarm Setting
Function instruction: Used to configure Cross-Border Alarm
parameters. Operation steps:
1.Left click “System setting” in context menu or in bottom window.
2.Left click “Alarm-Intelligent Analysis” and then turn to
Cross-Border Alarm dialog, as the following picture shows:
10.2.3 Advanced Alarm Setting
1.Left click “system setting” in context menu or in bottom window.
2.Left click “Alarm-Alarm Setting” and turn to Alarm Setting dialog,
as the following picture shows:
Function instruction: Used to configure alarm switch, buzzer
switch, abnormal alarm push to mailbox, abnormal alarm push
to APP. Operation steps:
11.System Maintenance
Function instruction: Maintain the NVR system, including restart
system according to schedule,upgrade using u-disk, reset factory,
import/export. Operation steps:
www.sv3c.com
18 www.sv3c.com
19
11.1 System Basic Information
1.Left click “system setting”in context menu or in bottom menu.
2.Left click “maintain”in system setting window, system turns to
“system maintenance”.
1.Left click “system setting” in context menu or in bottom menu.
2.Left click “system information” in system setting window, system
turns to “information” dialog.
Function instruction: Used to show NVR system information, including
product model, device ID, product serial number, software version,
hardware version, website, QR code. Operation steps:
11.2 Storage Device
Function instruction: Used to check disk information, HDD formatting.
Operation steps:
1.Left click “system setting” in context menu or in bottom menu.
2.Left click “Device” in system setting window, system turns to “Device”
dialog as the following picture shows:
3.Select one item in the storage device list. Click “Formatting”
button to format HDD. For large-disk NVR, you need to choose all
disks that you want to format. And then click “Formatting” button
to format HDD. As the following picture shows:
4.We also provide different strategies when your HDD is full.
“Overlay Write” will continue to record and overlap the earliest
video recording data. You can also select “stop recording” as your
strategy that NVR stops recording as soon as the HDD is full.
12.FAQ
Q: What is NVR default user name and password?
A: user name : admin, password: 123456.
Q: What should I do when I forgot my password?
A: Please operate as below:
Step 1, Click “Forgot password” button on the log-in interface
and turns to “Temporary password QR code” interface.
Step 2, Scan the temporary password QR code through Seetong
App and you will get a temporary password.
Step 3, Enter the temporary password and reset your password.
Q: Why can I see nothing when I start the system?
A: Please operate as below:
Step 1, Check NVR if it has electricity, user can check mouse lamp,
Ethernet port and so on, we suggest use NVR standard power.
www.sv3c.com
20 www.sv3c.com
21
Q: After starting interface, it prompts “NO HDD”
A: Please operate as below:
Step 1, Confirm NVR to connect regular hard disk without fault.
Step 2, Confirming NVR’s power is enough, we suggest customer to use
standard power.
Step 3, Confirming NVR HDD power interface and SATA interface is normal.
Step 3, Check interface if there is output after deleting all outside device
and power on by itself, our NVR support VGA output and HDMI signal.
Step 2, Check display resolution, our NVR default resolution: 1920x
1080. When the Maximum resolution of display is less than NVR,
there is no interface output. You can keep pressing Right mouse
button for more than 10 seconds and NVR output resolution will be
set to 1024x768.
Q: After starting interface, it prompts “NO HDD”
A: Please operate as below:
Step 1, Confirm NVR to connect regular hard disk without fault.
Step 2, Confirming NVR’s power is enough, we suggest customer to
use standard power.
Step 3, Confirming NVR HDD power interface and SATA interface is normal.
Q: How to deal the condition that I have no Cloud ID?
A: Please operate as below:
Step 1:NVR only can gain cloud ID after the NVR device is activated
when connecting internet, it can check cloud ID through moving
mouse to the margin top of main interface.
Step 2:Enter NVR’s main interface, click right key, enter “system
setting-system-basic information”, check product serial number if it is
legal, the illegal serial number begin with “FFFFFFFF********”.
Q: Why I can not find my IP camera when I use the search function?
A: Please operate as below:
Step1: Check NVR if it is connected to cable, we can check Ethernet port
flicker to judge.
Step2: If user can’t search ONVIF IPC, please confirm ONVIF IPC and NVR
are in the same network segment, make sure that IPC supports ONVIF
2.1 and above version.
Q: It Prompts that channel have run out of resources?
A: The total bandwidth of NVR is limited, when channel run out of
resources, please reduce relative channel code rate.
Q: When IPC devices are added to multi-channel NVR, my NVR is
choppy and sometimes lag. How to deal with this condition?
A: We strongly suggest user to use gigabit switch when you use a
multi-channel NVR(channel number>16).
Q: The new NVR interface is a little bit dazzling. Can I adjust the
brightness and color of the new UI?
A: Please operate as below:
Step 1: Log in, right click to open context menu, turns to System
setting interface.
Step 2: Turns to “General-Advanced setting”, open “Adjust the
interface background color” configuration.
Step 3: Adjust the brightness.
Q: What is the maximum number of TB HDD supported by NVR?
A: Supports maximum of 14TB HDD.
13.More Information
This manual is to help customers to know and use the NVR kits
quickly, for detailed instructions please refer to SV3C website
https://sv3c.com/manual-t-series-download
This manual may have descriptions and operations that do not
match the product, If you have any question or need technical
support Please feel free to contact us.
SV3C Website: www.sv3c.com
US Email address: info-us@sv3c.com
Table of contents
