Supero M34T User manual

Rev. 1.0a
M34T
MOBILE RACK
USER'S GUIDE
SUPER ®

CSE-M34T Mobile Rack User's Guide
ii
Manual Revision 1.0a
Release Date: July 7, 2011
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILLSUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATASTORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2011 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America

iii
CSE-M34T Mobile Rack User's Guide
Table of Contents
Contacting Supermicro.......................................................................................iv
Returning Merchandise for Service.....................................................................v
Chapter 1 M34T Mobile Rack Specifications ........................................1-1
1-1 Overview .........................................................................................................1-1
1-2 Product Features.............................................................................................1-1
1-3 Packing List .................................................................................................... 1-2
1-4 SATA M34 Backplane......................................................................................1-3
Front Connectors and Jumpers ......................................................................1-3
Accessing the Hard Drives ............................................................................. 1-4
Accessing the Backplane................................................................................1-6

CSE-M34T Mobile Rack User's Guide
iv
Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: [phone]
Fax: [phone]
Email: [email protected] (General Information)
[email protected] (Technical Support)
Web Site: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: [phone]
Fax: [phone]
Email: [email protected] (General Information)
[email protected] (Technical Support)
[email protected] (Customer Support)
Asia-Pacific
Address: Super Micro Computer, Inc.
4F, No. 232-1, Liancheng Rd.
Chung-Ho 235, Taipei County
Taiwan, R.O.C.
Tel: [phone]
Fax: [phone]
Web Site: www.supermicro.com.tw
Technical Support:
Email: [email protected]
Tel: [phone]

v
CSE-M34T Mobile Rack User's Guide
Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is required be-
fore any warranty service will be rendered. You can obtain service by calling your
vendor for a Returned Merchandise Authorization (RMA) number. When returning
to the manufacturer, the RMA number should be prominently displayed on the
outside of the shipping carton, and mailed prepaid or hand-carried. Shipping and
handling charges will be applied for all orders that must be mailed when service
is complete.
For faster service, RMA authorizations may be requested online (http://www.super-
micro.com/support/rma/).
Whenever possible, repack the mobile rack in the original Supermicro carton, using
the original packaging material. If these are no longer available, be sure to pack the
mobile rack securely, using packaging material to surround the mobile rack so that
it does not shift within the carton and become damaged during shipping.
This warranty only covers normal consumer use and does not cover damages in-
curred in shipping or from failure due to the alteration, misuse, abuse or improper
maintenance of products.
During the warranty period, contact your distributor first for any product problems.

CSE-M34T Mobile Rack User's Guide
vi
Notes

1-1
CSE-M34T Mobile Rack User's Guide
Chapter 1
M34T Mobile Rack Specifications
1-1 Overview
This manual is written for system integrators, PC technicians and
knowledgeable PC users. It provides detailed information for the installation and
use of the CSE-M34T mobile rack.
The Supermicro CSE-M34T mobile rack offers cutting edge technolgy with greater
flexibility. The CSE-M34Tsupports four SerialATAhot-swappagle hard drives. These
hard drive yield an unparalleled storage capacity without compromising productivity,
by eliminating possible system downtime.
1-2 Product Features
Occupancy Three 5.25" drive bays•
Capacity Four 1" host receptacle connectors, SATA hot-swap-• pable hard drives (CSE-M35T-1 only)
Cooling Subsystem
Monitoring One 9 cm exhaust fan• Fan fail detection LED and alarm• Overheat LED indication• Drive fail alarm indication (CSE-M35S only)• Built-in termination (CSE-M35S only)•
Dimensionsw (Wx-
HxD) 146mm x 129mm x 245mm (5.7 in x 5.0 in x 9.5 in)•
Weight Net: 5.9lb (2.9 kg), Gross: 7.5lb (3.7 kg)•

CSE-M34T Mobile Rack User's Guide
1-2
1-3 Packing List
The CSE-M34T mobile rack includes the following:
CSE-M34T mobile rack
•
One 90 mm exhaust fan•
Four drive carriers, part number CSE-PT10 (beige only)•
Six counts of 6-32 hex washer head screws•
Eight counts of M3 washer head screws•
Eighteen counts of pan head screws•
One Serial ATA backplane, part number CSE-SATA-M34•
Four Serial ATA cables, part number CBL-0044L•
Serial ATA LED cable, part number CBL-0057L•
Additional Information
The CSE-M34T mobile rack was designed for use in certain chassis and servers
or as a stand-alone unit. Refer to the chassis or server manuals for installation
instructions. Use the instructions listed in this manual when using the mobile rack
independent of a chassis.
The pictures or graphics shown in this user’s guide were based upon the latest
PCB revision available at the time of the publishing of this manual. The CSE-M34T
mobile rack may or may not look exactly the same as the graphics shown in this
manual. The availability of SAS-devices supported depends on the readiness of
firmware and hardware support.

1-3
CSE-M34T Mobile Rack User's Guide
1-4 SATA M34 Backplane
Front Connectors and Jumpers
Figure 1-1. Mobile Rack Backplane (Front)
JP18
JP25
Channel #2
Channel #3
Channel #4
Channel #1
JP28
ACT2
ACT3
ACT4
COM
Key
JP26
ACT1
Activity LEDs Pin Definitions JP26
Act. LED1 = Channel 1
Act. LED2 = Channel 2
Act. LED3 = Channel 3
Act. LED4 = Channel 4

CSE-M34T Mobile Rack User's Guide
1-4
Accessing the Hard Drives
Accessing Hot-Swappable Drives
Push the release button located beside each drive's LED.1.
Lift up on the drive's handle.2.
Carefully pull the drives out of the storage module.3.
Release Buttons
1
2
3
Figure 1-2: Releasing the Drives
Figure 1-3: Removing the Drives

1-5
CSE-M34T Mobile Rack User's Guide
Installing a Drive into the Drive Tray
Mount the drive in the drive tray.1.
Secure it into the drive tray as shown with the screws provided.2.
Figure 1-4: Installing the Drive into the Drive Tray
Warning! Enterprise level hard disk drives are recommended for
use in Supermicro chassis and servers. For information on rec-
ommended HDDs, visit the Supermicro Web site at http://www.
supermicro.com/products/nfo/files/storage/SAS-1-CompList-
110909.pdf
!

CSE-M34T Mobile Rack User's Guide
1-6
Accessing the Backplane
Remove the screws located on the back of the mobile rack unit as shown.1.
Pull out the rear fan bracket.2.
Remove the screws securing the backplane.3.
1
Figure 1-4: Accessing the Backplane
2
4
Remove the backplane.4.
1
3
1
3

1-7
CSE-M34T Mobile Rack User's Guide
Notes

CSE-M34T Mobile Rack User's Guide
1-8
Disclaimer (cont.)
The products sold by Supermicro are not intended for and will not be used in life sup-
port systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices,
aircraft/emergency communication devices or other critical systems whose failure to per-
form be reasonably expected to result in significant injury or loss of life or catastrophic
property damage. Accordingly, Supermicro disclaims any and all liability, and should
buyer use or sell such products for use in such ultra-hazardous applications, it does so
entirely at its own risk. Furthermore, buyer agrees to fully indemnify, defend and hold Su-
permicro harmless for and against any and all claims, demands, actions, litigation, and
proceedings of any kind arising out of or related to such ultra-hazardous use or sale.