Symmons Dia SLS-3512 Series Reference guide

Step 2
Connect supply hoses
HOT COLD
Step 3
Flush lines and
check for leaks
Step 1
Attach faucet assembly
Pop-up Drain
Optional
Adjust limit stop washer
to limit handle turn to the
hot position if desirable
Quick Install Guide Dia Lavatory Faucet, SLS-3512, SLS-3510 Series
HOT COLD
ON
OFF
+
-
2.5 mm
PLUMBERS
PUTTY
Model Numbers
SLS-3512 Lavatory faucet with lift
rod and pop-up drain
SLS-3510 Lavatory faucet only
Decorative Finishes
Append finish suffix code to replacement
part numbers when applicable
-Polished chrome (standard)
Model SLS-3512
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to cause cancer,
birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.
 Need Help?
Contact Symmons customer service at
P: [phone], F: [phone]
Email: [email protected]
Monday - Friday 7:30 am - 6:00 pm EST
Please check Symmons website
for technical help, the latest product
information and warranty policy.
www.symmons.com/service
Tools & Materials
Installation Brief
Dia®
Lavatory Faucet SLS-3512, SLS-3510 Series

1-7/8" (48 mm) dia
2-5/16" (58 mm) dia
1-3/16" (30 mm)
1-3/16" (30 mm) dia
Hole size
1-1/4" (32 mm) min
1-1/2" (38 mm) max
2-11/16"
(68 mm)
7"
(178 mm)
4-1/2"
(114 mm)
5-3/8"
(137 mm)
4"
(102 mm)
3-5/8"
(92 mm)
13-7/16"
(341 mm)
7/16"
(11 mm)
Lift Rod
8-5/16"
(211 mm)
Min.
2-1/2"
(64 mm)
Deck thickness
2-1/16" (52 mm) max
Notes:
(1) Dimensions subject to change without notice
(2) Lift rod included with model SLS-3512 only
7-7/16"
(189 mm)
7-3/16"
(183 mm)
Deck plate
Hole size (2x)
1" (25 mm) min
1-1/2" (38 mm) max
4"
(102 mm)
Deck thickness
1-7/8" max
(48 mm)
Dimensions Dia Lavatory Faucet, SLS-3512, SLS-3510 Series
Symmons Industries, Inc. ■ 31 Brooks Drive ■Braintree, MA 02184 ■Phone: [phone] ■ Fax: [phone]
Copyright © 2018 Symmons Industries, Inc. ■symmons.com ■[email protected] ■ZV-1039 REV M ■120518
Aerator kits
2.2 gpm (8.3 L/min)
1.5 gpm (5.7 L/min)
1.0 gpm (3.8 L/min)
0.5 gpm (1.9 L/min)
Cartridge with
limit stop
Part Number Item
Replacement Parts
RL-314
RL-059-2.2*
RL-059-1.5*
RL-059-1.0*
RL-059-0.5*
includes aerator, retainer & washer
RL-066*Handle kit
includes handle, allen
screw & RB button plug
requires 2.5 mm Allen wrench
Mounting hardware kit
RL-067 threaded
studs (2)
hex nut (2)
rubber washer (1)
metal washer (1)
LN-341*Lift Rod
RL-081*4" Deck Plate (Optional)
*
Note: For decorative nish faucets append the
appropriate sufx code letters to part numbers
marked with an asterisk (*)
aerator
aerator retainer
base gasket
mounting gasket
mounting plate
mounting nut
Ordering replacement parts:
Call Symmons customer service at [phone],
M-F 7:30 am - 6:00 pm EST or check our website at
ww.symmons.com for a list of Symmons distributors.
ex supply hoses
length: 27-1/2" (700 mm)
COLD: blue stripe
HOT: red stripe
3/8" compression
cap
retainer nut
cartridge
faucet body
handle
allen screw
button plug
lift rod
(model SLS-3512 only)
stopper
P-100N
pop-up drain
assembly
RL-154LR-11*
includes stopper
2.5 mm wrench
included
Model SLS-3512
Parts Assembly Dia Lavatory Faucet, SLS-3512, SLS-3510 Series