Symmons Duro SLS-3610 series Manual

Duro®
Model Numbers Feature Highlights
Warranty
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Single Handle Lavatory Faucet
Operation & Maintenance Manual
SLS-3612-1.5, SLS-3610-1.5
Note: Append appropriate -sufx to model number.
Options/Modifications
-BBZ Brushed Bronze finish
-MB Matte Black finish
-STN Satin Nickel finish
Compliance
SLS-3612-1.5 Single Handle Lavatory Faucet
with Metal Drain Assembly
SLS-3610-1.5 Single Handle Lavatory Faucet
• Single hole mount
• Quarter turn ceramic control cartridge
• Braided hose connections (3/8" compression)
• 6-7/8" height
• Metal drain assembly (SLS-3612 series only)
• Standard 1.5 gpm (5.7 L/min) aerator
• Shall be made from metal construction, plated
in standard polished chrome nish
Note: Append appropriate -sufx to model number.
Finish Modifications
-0.5 0.5 gpm (1.9 L/min) aerator
-1.0 1.0 gpm (3.8 L/min) aerator
-Delete
Suffix 1.5
2.2 gpm (8.3 L/min) aerator
-DP4 4" deck plate for single hole mount
faucets c
- ASME A112.18.1/CSA B125.1
- NSF/ANSI 61.9; NSF/ANSI 372
- WaterSense 1.5 gpm (5.7 L/min) only Certied by
IAPMO R&T
CG
CG
SLS-3612 SLS-3610
Dimensions
Measurements
A 1-11/16", 43 mm
B
Hole Size:
Min. Ø 1-1/4", 32 mm
Max. Ø 1-1/2", 38 mm
C 3/16", 5 mm
D 4-7/16", 113 mm
E Min. 1/2", 13 mm
F 8-7/16", 214 mm
G 6-7/8", 175 mm
H 5-5/16", 135 mm
I 12°
J
Deck Thickness Ref.
Min. 7/8", 22 mm
Max. 2-1/2", 64 mm
K 24", 610 mm
L (2x) 3/8" compression tting
Note: Dimensions subject to change without notice.
AA
CBB JJ
L
DD
FF
G
H
KK
I
E
BACKSPLASHBACKSPLASH

2
Parts Breakdown
Tools Required
Adjustable wrench
Allen wrench 2.5mm
Plumber tape
Plumber putty
Replacement Parts
Item Description Part Number
A
B
C
Handle
Set Screw
Plug Button
LN-01416*
AA
BB
D
Compression Nut
Limit Stop
Cartridge
RL-069
BB
D
Limit Stop
Cartridge RL-070
F
Aerator 2.2
Aerator 1.5
Aerator 1.0
Aerator 0.5
RL-059*
RL-063*
RL-064*
RL-065*
J
K
T
Lift Rod
Stopper
Ball Rod
RL-014*
KK Pop-up Assembly RL-154LR-11*
J Lift Rod RL-015*
K Stopper RL-016*
G, H
I
Y
Mounting Gaskets (2x)
Fasteners
Supply Hose
RL-011
Z Deck Plate RL-082*
*Note: Append appropriate nish -sufx to part number
for premium nish.
A
D
E
G
H
I
F
Y
B
C
J
T
X
K
L
O
M
N
P
Q
W
UV
S
R
OPTIONAL
KK
AA
BB
Z

3
Installation
1) Insert faucet body (E) through
deck surface.
2) Slide mounting gasket (G) and
metal washer (H) on to fasteners (X).
Secure with mounting nuts (I).
Note: Hoses removed for clarity.
3) Install plumber tape to inlets of
shut-off valves. Attach supply lines
to shut-off valves and hand tighten.
Using a wrench, nish with one-
half turn. DO NOT overtighten.
4) Apply plumber putty to underside
of ange (L).
5) Insert ange (L) into drain
opening. From below, attach
drain body (Q) with gasket (M)
and washer (N) to ange (2-3
turns until hand tight).
Note: Make sure drain cavity (on
drain body) faces rear of sink.
6) From below, tighten ange nut (O)
to secure drain body (Q).
DO NOT overtighten.
Note: Make sure ange is centered
in drain opening.
7) Insert stopper (K) into ange (L)
and rotate to proper position.
Note: Stopper can be installed
removable or non-removable
determined by eye hole position.
1
2
G
X
H
I
11
2
E
L
3
1
2
L
Q
MN
OPTIONAL
O
Q
K
Non Removable
K
L
Removable
K
Removable
Optional: Adjust limit stop washer
to limit handle turn to the
hot position if desirable.
2
1
3
_
+

Installation
8) Insert pivot rod (T) into drain
body (Q) against gasket (P) and
inner seat (R). Install outer seat
(S) against pivot ball and secure
assembly by tightening retaining
nut (U).
Note: Pivot rod passes under
stopper.
9) Insert lift rod (J) into back of
faucet body (E). From below,
attach clevis strap (W) to lift
rod (J). Tighten thumb screw to
secure.
10) With stopper in closed location,
insert pivot rod (T) into clevis
strap (W). Secure with spring
clip (V).
11) To adjust stopper, select
another hole in clevis strap or
loosen thumb screw to slightly
raise or lower lift rod.
12) Attach drain body to drain trap.
1
T
S
U
Q
R
P
2
2
1
3
J
E
J
W
T
W
V
V
Troubleshooting Chart
Problem Cause Solution
Finish is spotting. Elements in water supply may cause
water staining on nish.
Clean nished trim area with a soft
cloth using mild soap and water or a
non-abrasive cleaner and then
quickly rinse with water.
Faucet is leaking from handle
or faucet body.
Cartridge o-rings are worn or foreign
matter (dirt, chips) is lodged between
cartridge and o-rings.
Remove cartridge and inspect for
foreign matter. Replace cartridge
if necessary.
Faucet no longer maintains desired
temperature.
Hard water deposits inside of
cartridge is preventing accurate mix
of hot and cold water.
Soak cartridge in white vinegar for
1 hour to breakdown hard water
deposits, then rinse with water.
Replace cartridge if necessary.
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■Phone: [phone] ■ Fax: [phone]
Copyright © 2018 Symmons Industries, Inc. ■symmons.com ■[email protected] ■ZV-3030 REV F ■053118
WARNING: This product can expose you to chemicals including lead, which is known to the state of California to
cause cancer, birth defects, or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.