Symphony SYM-412 User manual

© 2020
Locked layer contains
placeholder marks.
Note: Velcro must face front of assembled counter.
Counter Top
Counter Shelf
Upper Legs
Lower Legs
Counter Base
Graphic
Clips w/
Velcro
Clips w/
Velcro
Velcro
Velcro
screw
caps
Assemble unit upside-down.
Item
--
--
--
--
--
--
Qty.
2
2
2
2
1
1
1
Description
16.732”h aluminum Leg (lower)
16.732”h aluminum Leg (lower w/ Velcro)
16.732”h aluminum Leg (upper)
16.732”h aluminum Leg (upper w/Velcro)
43”w x 21.5”d Counter Base
40.1”w x 16”d Counter Shelf
43”w x 21.5”d Counter Top
Steps:
Note: Assemble counter upside-down.
1) Attach upper legs to underside of Counter Top. Twist to tighten.
2) Connect lower Legs through Counter Shelf to upper Legs, as shown.
3) Place Counter Base over lower Legs & secure with screw caps.
4) Turn counter unit over & affix Graphic to Velcro on front of unit.
When assembled
TOP VIEW
Counter Shelf
Velcro faces front
Symphony SYM-412 Portable Counter
If you would like to tell us about your experience with your setup instructions please email us at [email protected]
SETUP INSTRUCTIONS

© 2020
General Setup Instructions
- Read entire setup instruction manual prior to
unpacking parts and pieces.
- The setup instructions are created specifically
for this configuration.
- Setup instructions are laid out sequentially in
steps, including exploded views with detailed
explanation for assembly.
Cleaning & Packing
- For Cleaning Metal, Plex, & Laminate Parts:
Use a MILD NON-ABRASIVE cleanser and
soft cloth/paper towel to clean all surfaces.
- Keep exhibit components away from heat
and prolonged sun exposure.
Heat and UV exposure will warp and
fade components.
- Retain all provided Packing Materials.
All provided packing materials are for
ease of repacking & component protection.
Disassembly
- For loss prevention, keep all
knobs & connectors attached to
extrusions during disassembly.
Part Identification - Numbering
7A
Engaged Lock
DO NOT USE POWER TOOLS
ALL CONNECTIONS MUST
BE TIGHTLY SECURED
WARNING
General Information