Syn-Apps 011104 Manual

Installation Quick Reference
VoIP Ceiling Speaker
011104*, RAL 9002, Gray White, Standard
011105, RAL 9003, Signal White, Optional
Quick Reference 930348K © 2016, Syn-Apps L.L.C. ALL RIGHTS RESERVED© 2016, Syn-Apps L.L.C. ALL RIGHTS RESERVED 930348K Quick Reference
4.00 [101.6]
120°
VoIP Speaker
Mounting Template
Speaker Hole Diameter:
7.50 [190.5]
Screw Hole Diameter:
0.1875 [4.75]
Dimensions are in inches [millimeter]
Typical System Installation
Getting Started
●Create a plan for the locations of your speakers.
●Prior to installation, consult local building and electrical code requirements.
Parts
Parameter Factory Default Setting
IP Addressing DHCP
IP Addressa
a. Default if there is not a DHCP server present.
10.10.10.10
Web Access Username admin
Web Access Password admin
Subnet Maska255.0.0.0
Default Gatewaya10.0.0.1
Syn-Apps Announce Server
802.3af/at Compliant Ethernet Switch
Clock Kit IP PhoneSpeaker Speaker
(1) Template for Speaker
and Screw Holes*
(1) Speaker Assembly (1) Drop Ceiling Mounting Kit
(3) #8 Nylon Thumb Nuts
(3) #8 Fender Washers
(3) 8-32 x 1 1/4” Mounting
Screws
(1) Drywall Mounting Kit
(3) Plastic Ribbed Anchors
(3) #8 Sheet Metal Screws
* See the last page
of this document

© 2016, Syn-Apps L.L.C. ALL RIGHTS RESERVED 930348K QuickReference Quick Reference 930348K © 2016, Syn-Apps L.L.C. ALL RIGHTS RESERVED
Mounting
Contacting Syn-Apps
*Ceiling Tile or Dry Wall
Speaker Assembly
#8 Fender Washer (3x)
#8 Nylon Thumb Nut (3x)
#6 Screw (3x)
Dry Wall Mounting Kit
Template
Plastic Ribberd Anchor (3x)
Dry Wall Mounting Kit
#8-32x1 1/4" (3X)
Ceiling Mounting Screw
*Optional Reinforcement Mount
P/N: 010991A (Sold Seperately)
Tools Required for Installation:
• (1) Sheetrock saw or
(1) Drywall cutter
• (1) #2 Phillips Screwdriver or
(1) #2 Phillips Screwdriver Hex Bit
To mount a speaker:
1. Use the TEMPLATE on the back of this
document to cut a hole in the wall or
ceiling, and prepare holes for the screws.
2. Plug the Ethernet cable into the speaker
assembly. The yellow light verifies the
network connection.
3. For drop ceiling mounting, position the IP
SPEAKER ASSEMBLY in the ceiling so
that its screw holes align with those you
prepared.
4. For drywall mounting, place the three
PLASTIC RIBBED ANCHORS in the
holes you prepared, and position the IP
SPEAKER ASSEMBLY over them,
aligning the screw holes in the assembly
with the anchors.
5. For drop ceiling mounting*, use the three
8-32 x 1 1/4" MOUNTING SCREWS, #8
NYLON THUMB NUTS, and #8
FENDER WASHERS to secure the
speaker.
For drywall mounting, use the three #8
SHEET METAL SCREWS to secure the
speaker.
* For weak ceiling tile, CyberData offers a
reinforcing mount (CyberData part
number 010991).
Corporate Headquarters
Syn-Apps LLC
2812 N Norwalk
Suite 112
Mesa, AZ 85215
Phone: [phone]
Fax: [phone]
Website: www.syn-apps.com
Sales: [email protected]
Support: http://www.syn-apps.com/resources/support
Email: http://www.syn-apps.com/contact-us
Dimensions
Connecting Power
Features
9.000 [228.60] 3.140 [79.75]
DIMENSIONS ARE IN INCHES [MILLIMETER]
AUX SPEAKER (-)
AUX SPEAKER (+)
GND
LINE OUT (-)
LINE OUT (+)
+5V OUT
RELAY NO
RELAY COM
AUX POWER (-)
AUX POWER (+)
(+12VDC @ 1A)
J10 J9
N/C
N/C
CLASS II WIRING
9.000 [228.60] 3.140 [79.75]
DIMENSIONS ARE IN INCHES [MILLIMETER]
PoE Injector (Part #010867)
Non PoE Switch
802.3af Compliant PoE Switch
RTFM Switch
To broadcast a device’s current IP address, press and
release the RTFM switch within a five second window.
To restore a device’s factory default settings, press and hold
the RTFM switch for more than five seconds.
Speaker Volume
Network Link/Activity LED (yellow)
Speaker Status LED (green)
A solid light confirms that the speaker is operational.