syncrotek Nox Audio CN400 User manual

ENGLISH
CN400
CN550
CN700
Column Speaker
OWNER’S MANUAL
Version 1. Winter, 201
By syncrotek

PRODUCT DESCRIPTION
diagrams to familiarize yourself with the product.
grade extruded aluminum and equipped with perforated grill. With the
1

IMPORTANT
Please read this manual carefully and Save it for future reference. Follow all
individuals handling it.
Never use damp or spill liquid of any kind on the product and clean it only
with a dry cloth.
covers may expose you to dangerous voltage points or other risks. Refer all
center.
Use the necessary care to avoid hearing damage when using the product at
close distance and high sound pressure levels, if so, please use an adequate
2

PRODUCT DIAGRAMS
CN700
106mm
691mm
CN550 CN400
548mm
405mm
CN700CN550CN400
106mm
106mm
75mm
75mm
75mm
Front Drawing (without grill)
Side Drawing (without grill)
3

SPEAKER CONNECTION
Keep the same polarity terminals wired together to ensure correct
the overall performance of the system.
Power Level Tapping
BlackGreen
White
CN700
CN550CN400
White
Green
Black
20W
10W
COM
30W
15W
COM
40W
20W
COM
Model
4

STANDARD INSTALLATION
For hanging the colunm speaker, you can make the holes on the surface
Drill hole distance
CN400
CN550
CN700
325
468
611
Model mm
M6 Thread screws
20mm
20mm
Drill hole distance
for the value of
the speaker
Washer
Angled plate
5

ANGULAR INSTALLATION
Angle adjustment
Max. dispersin angle
Distance A
Follow the procedure for the
angled plate, you can adjust the
angle of the dispersion of the
maximum angle and adjust to less
can also do the same horizontal
Flat plate
6

of the speaker
ANGLE ADJUSTMENT
50 degree Max.
adjust the angle of dispersion
horizontally according to your
requirement. The maximun angle is
50 degree each side. At last, please
dispersion as per the method stated
7

tear.
dealer.
8
Improper handling, neglect or failure to operate the unit in
compliance with the owner’s manual provided with the products.
where it is used.
personnel including the user will void this warranty.

Frequency response
Impedance
Input terminals
Full range driver type
Body
Hardware
Coverage Angle
Dimensions (H x W)
Depth
Net Weight
Color
CN400
91dB
20/10
4x2.5”
405x106mm
75mm
2.04kgs
CN700
SPECIFICATIONS
100V
Extruded Aluminum
CN550
170Hz - 15kHz
92dB
30/15
6x2.5”
548x106mm
75mm
2.74kgs
93dB
40/20
8x2.5”
691x106mm
813mm
3.46kgs
White
TECHNICAL SPECIFICATIONS
9
100º*75º100º*65º100º*55º

TROUBLE SHOOTING
Cause
No Sound
Low sound
output
Noise
Disconnected, no
power, volume too
low
speaker overloaded
Volume set too
low, shorted
Speaker
components
not grounded,
hardware loosen
Check power supply, set volume
appropriate level
Check the hardware if they are
Noxaudio dealer.
10

Nox Audio
E
Wwww.noxaudio.com
Technical Department