Tala The Muse User manual

Thoughul lighng, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at tala.co.uk
USER GUIDE
e Muse - Replacement Battery
PREPARATION
Please read instrucons thoroughly before installaon
and keep them for future reference.
Improper assembly can undermine the safety and
longevity of the product.
Perform baery replacement on a clean surface free
from debris.
WARNING
Do not drop, damage or expose the baery pack to
water or re.
Only use replacement baeries from Tala directly.
Aer assembly, ensure all xings are ghtly sealed and
do not allow internal components and surfaces to be
exposed to water.
AFTER-CARE
Used baeries should be recycled aer use.
Tips to prolong the baery life:
- Once fully charged, please remove from charger
- Avoid leng The Muse reach 0% baery, when the low
baery indicator starts blinking, it should be recharged
- When not in use, store The Muse with between 25-
50% baery (1-2 indicators on)
- During charging, make sure The Muse is uncovered to
avoid over-heang
Join the Community
Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag: ligholiveby
Tala Studios, 25B Vyner Street, London E2 9DG | [email protected]
Tala Europe B.V, Bertus Aaeshove 40, Nieuwegein 3437JN, Netherlands
Tala North America, Inc. P.O. Box 89 1051, Port Washington Blvd. Port Washington, NY 11050, USA
SKU - REP-MUSE-BTY-01

STEP 1
Lay the lamp down on a clean
surface free of debris.
Peel o the Rubber Pad on the base
of The Muse.
For beer adhesion when replacing
this pad, remove as much residue
as possible. Do not use alcohol or
solvents as these will damage the
nish of the product.
STEP 2
Unscrew the four outer screws on
the Base and set the screws aside.
Remove the Base.

STEP 3
Idenfy the holding screws for the
Baery Bracket.
Loosen these with a screwdriver, but
do not remove fully.
STEP 4
Twist the Baery Bracket
an-clockwise to release from the
holding screws.
The Baery Bracket can now be
removed with the Baery aached.
STEP 5
The Baery can be detached from
the main body by releasing the white
connector.
It can then be removed from the
Baery Bracket. This may be secured
by tape which can be removed.

STEP 6
Replace the baery onto the
Baery Bracket and re-connect the
connectors as shown.
Re-insert the Baery Bracket into
The Muse body. Being careful to
ensure all cables are out of the way.
Do not trap any cables underneath
the bracket.
STEP 7
Twist the Baery Bracket clockwise
to locate the bracket onto the
Holding Screws. Re-ghten the
screws to secure in place.
Replace the Base and secure with
the four outer screws.
STEP 9
Test the connecon is successful
by pressing the buon at the back
of the lamp base and checking the
baery level indicators.
STEP 8
Aach the new Rubber Pad onto
the base, ensuring the window
aligns with the product informaon
text.