Talvor Clayfield User manual

MOTORHOMES | CAMPERVANS | CARAVANS
OWNERS MANUAL

TALVOR
2 |
Congratulations on becoming a Talvor
owner, and thank you for choosing to
become part of the Talvor family. Using the
nest materials available, this product has
been carefully designed, engineered and
manufactured for your enjoyment. Talvor
enjoys a reputation for great value and
quality; this is why we stand behind all our
products with our warranty program.
We wish you many happy years of
enjoyment with your new Talvor and look
forward to a long and happy relationship.
Congratulations on
becoming a Talvor owner

Owners Manual
| 3
Contents
Introduction ............................................................4
Limited Warranty ........................................................5
Getting Started..........................................................8
Caravan Towing Tips......................................................9
Set Up ...............................................................11
Appliances & General Equipment ...........................................12
Caravan Equipment .....................................................17
General Care and Maintenance.............................................20
Electrical System 12V ....................................................23
Electrical System 240V ...................................................25
Electrical Diagram Motorhomes & Campervans ................................26
Electrical Diagram Caravans ...............................................27
General Plumbing Diagram ................................................28
Service Log ............................................................29

TALVOR
4 |
This Owner’s Manual was prepared to
help you understand the safe, proper
use and operation of your Recreational
Vehicle (RV), the servicing and maintenance
of component parts, and includes an
explanation of your warranty protection.
The information provided is intended to
help you derive the most enjoyment from
your Talvor Product.
To enjoy trouble free touring with your
motorhome, campervan or caravan, we
recommend an annual inspection and
service by an authorised Talvor dealer.
This manual contains the most accurate
information available at the time of
publication. Talvor Products are constantly
being improved and we seek to upgrade
our components and parts accordingly.
If the equipment in your unit differs
from some descriptions contained within
this manual please refer to the separate
Manufacturer’s Instructions contained in
your Owner’s Pack. Please also carefully
read and understand the Owner’s Manuals
supplied by manufacturers of separately
warranted products.
We recommend you keep this Manual in
your unit for handy reference. It will help
you get to know your Talvor Product and
how it operates.
Customer service
Talvor is committed to delivering excellent
customer service. Your complete condence
and satisfaction in our product and
services assures our continued success.
Our commitment to technical excellence is
one aspect of our strategy for fostering an
ongoing, mutually rewarding relationship
with all Talvor customers through our
network of dealers.
Your authorised dealer will assist you by
providing service, maintenance, a selection
of options and instructions concerning the
operation of your Talvor Product.
Most issues that arise from
misunderstandings concerning warranty
and service manuals are usually solved by
dealers. Please understand that in most
instances we refer you to the local dealer
with our recommendations.
Insurance
As with your car, it is important that
you protect yourself and others with
insurance coverage for personal liability,
theft, collision, property damage, etc.
Your dealer will assist you in obtaining
specialised insurance for your RV. Please
note that exceeding the load limit of your
Talvor Product, and/or tow vehicle in the
case of caravans, above the manufacturer’s
recommended maximum weight may
invalidate your insurance cover. Please see
warranty information contained within this
manual.
DISCLAIMER
The contents of this manual (including but not limited to information about Talvor’s Products and services and
operating recommendations) is provided for general information purposes and is a guideline only. Every effort has
been made in the production of this manual to provide accurate information and to encourage Talvor’s customers
to use safe working practices in relation to the operation for Talvor’s Products. However, you must make and rely
on your own assessment of your particular situation to determine the suitability and usefulness of this information.
Accordingly, Talvor makes no representations, warranties or guarantees, either expressed or implied, regarding the
suitability of usefulness of this information. Talvor accepts no liability for any loss, damage, claim or expense suffered
by you arising from your use of or reliance on the information provided in this manual.
Introduction

Owners Manual
| 5
Talvor (referred to in this document as
we, our, us) offers a limited 24 month
warranty in relation to motorhomes and
campervans we manufacture and a limited
12 month warranty in relation to caravans
we manufacture (Talvor Products). The
warranty is set out in this document.
In the case of products, workmanship and
materials provided by our subcontractors or
suppliers, the warranty we provide will be
the warranty provided by the subcontractor
or supplier current at the time of delivery
of the product to us or the provision of the
workmanship and materials.
Subject to the use instructions and
exclusions section below and you complying
with your obligations set out in this
document, we warrant that Talvor Products
we deliver will be free from defects
(excluding fair wear and tear) due to faulty
workmanship for the periods set out below,
from the date you take possession of the
relevant Talvor Product from our authorised
dealer:
1. Motorhomes: 24 months
2. Campervans: 24 months
3. Caravans: 12 months
We are not responsible for any damage
which may occur to a Talvor Product,
including without limitation through your
use or misuse of the Talvor Product. The
warranty does not cover items routinely
replaced in the course of vehicle servicing,
including without limitation tyres, batteries,
light bulbs, hoses, seals, consumables,
routine maintenance items and wheel
alignments.
The limited warranty covers the original
purchaser of a Talvor Product, but is not
transferable. This means that a subsequent
purchaser of Talvor Products cannot make a
claim under the warranty.
Subject to the Australian Consumer
Law section below, except as otherwise
specically provided herein, we make no
representations or warranties, express or
implied, including without limitation, to
the extent permitted by applicable law,
any implied warranty of merchantability or
tness for a particular purpose, about any
Talvor Product.
Repair or replacement of
Talvor Products
The warranty is limited to, in our sole
discretion, the repair or replacement of
the faulty or defective part of the Talvor
Product. Subject to the paragraph below,
it does not extend to labour or shipping
costs associated with repairing or replacing
the faulty or defective part of the Talvor
Product, or any other loss or damage
associated with the Talvor Product. Subject
to the Australian Consumer Law section
below, we will not be liable for any other
cost, expense or damage incurred by
anyone in connection with a warranty
claim or generally. You are responsible
for bearing the expenses of claiming the
warranty.
Warranty repairs will only be carried out
at our workshop or a workshop approved
by us prior to such warranty repairs
being undertaken, and if made at such
a workshop you will not be charged for
labour costs. In all cases, any warranty
repair work must be authorised by us prior
to being undertaken. A service call fee will
apply to any onsite repairs.
Limited Warranty

TALVOR
6 |
Product registration
To protect and preserve your warranty
rights, you must register your Talvor Product
with us, unless applicable law species
otherwise. Failure to register your Talvor
Product voids the warranty.
You must report any fault or defect to a
registered Talvor Product to us within 14
days of becoming aware of the fault or
defect. You must follow the preventative
steps guidelines set out in the Talvor
Owner’s Manual immediately upon
becoming aware of such fault or defect.
The warranty does not apply if you fail to
follow the specied guidelines. You will
bear any costs associated with claiming
the warranty, including without limitation,
freight, handling and investigation costs.
Use instructions and
exclusions
The warranty does not apply to Talvor
Products which have faults or defects
caused or contributed to by:
a. defects drawn to the customer’s
attention before purchase;
b. failure to maintain or use the Talvor
Product in accordance with the Talvor
Owner’s Manual;
c. accident, theft, re, stone strike, hail,
windstorm, lightning, external re or
unusual environmental conditions;
d. any abnormal, unlawful or unintended
use, accident, contamination,
tampering, misuse, abuse, improper
storage or negligence by any person;
e. any use other than recreational use,
including without limitation commercial,
rental or permanent residency use;
f. the installation of any item or
equipment or any modication or after
treatment not authorised by Talvor;
g. any use of the Talvor Product outside
Australia; or
h. the owner of the Talvor Product failing
to comply strictly with the requirements
of the warranties.
Except as contemplated by the above
warranty and the Australian Consumer
Law section below, we are not liable for
any loss or damage suffered or incurred
by you (however caused, including by
our negligence) in connection with this
document or any Talvor Product.
Nothing above limits any statutory rights
of any person that cannot be limited or
excluded by law, and exists in addition to
other rights and remedies under relevant
law in relation to the goods to which the
warranty relates.
Australian Consumer Law
Except as contemplated by the next
paragraph, nothing in this document is
intended to limit any of your rights under
the Competition and Consumer Act 2010
(Cth) (Competition and Consumer
Act).
If the Competition and Consumer Act or
any other legislation states that there is
a guarantee in relation to any good or
service supplied by us in connection with
this document, and our liability for failing
to comply with that guarantee cannot be
excluded but may be limited, the exclusion
of liability provision set out above will not
apply to that liability and instead our liability
for such failure is limited (at our election)
to, in the case of a supply of goods, us
replacing the goods or supplying equivalent

Owners Manual
| 7
goods or repairing the goods, or in the case
of a supply of services, us supplying the
services again or paying the cost of having
the services supplied again.
Our goods come with guarantees that
cannot be excluded under the Australian
Consumer Law. You are entitled to a
replacement or refund for a major failure
and compensation for any other reasonably
foreseeable loss or damage. You are
also entitled to have the goods repaired
or replaced if the goods fail to be of
acceptable quality and the failure does not
amount to a major failure.
All entitlements referred to in the prior
paragraph are to be claimed against us to
the extent and in the manner contemplated
by the Competition and Consumer Act.
GST and taxes
Our fees for goods and services do not
include GST under A New Tax System
(Goods and Services Tax) Act 1999 (Cth).
You must also pay to us an amount equal to
the GST for the supply of those goods and
services. You are also responsible for all
other taxes payable in connection with this
document.
Governing law
The laws of Queensland, Australia govern
this document. Each of us irrevocably
submits to the non-exclusive jurisdiction
of the courts of Queensland, Australia and
courts competent to hear appeals from
those courts.
Customer service
If you wish to make a claim under the
warranty, please contact our Customer
Service:
Mailing address: 698 Nudgee Road,
Northgate, Queensland, 4013
Contact number: 1-800-TALVOR
Facsimile number: 07-3265-9201
Email address: [e-mail]
Website: www.talvor.com

TALVOR
8 |
Before you leave
We recommend you develop your own
routine for checking your vehicle, but listed
below are some of the areas we suggest
you pay attention to.
INSIDE:
• All 12V lights and appliances switched
off.
• TV’s stowed in transit positions.
• All loose items secured.
• All windows, catches, drawers,
cupboard doors, roof hatches closed
and locked
• Fridge door closed and locked.
• 3 way refrigerators set to electrical
source setting (never use on gas during
transit).
• All doors secured with locks or straps
provided.
• Raise rear bed to upper position
(selected models)
• Gas shutoff valve turned off.
• Remove and stow microwave cooking
plate.
OUTSIDE:
• Gas bottle(s) turned off and secured.
• Fully raise stabiliser legs (where tted).
• 240V Electrical lead disconnected and
stowed.
• Mains pressure hose disconnected and
stowed.
• Remove water from drain hose and
stow.
• Close and lock all storage and locker
doors.
• Annex, poles, ropes and pegs stowed.
• Awnings closed and stowed securely,
winder handle stowed.
• Secure and stow antennas (where a
xed type antenna is not installed).
• Slide-outs retracted and locked securely
(selected models).
• Ensure roof lockdown clamps are in the
locked position (selected models).
• Check tyre pressure (refer to tyre
placard).
• Retract entry step.
• Ensure all entry doors are properly
closed and secure.
• Check vehicles external lights and
indicators are all working.
• Check all mirrors.
Some additional steps if your RV is a
caravan:
• Check wheel nuts. Refer to “Wheel
Mounting”.
• Hitch van to car ensuring coupling catch
is in the locked position.
• Connect safety chain to car. Shackles
must be the same gauge as the safety
chain.
• Release caravan park brake.
• Remove and secure jockey wheel.
• Connect 7 or 12 pin plug to car socket
and check road lights.
• Check brakes are working in the rst 50
meters of travel.
In transit seating positions on all Talvor
motorhomes and campervans are displayed
on the relevant seating placards found in
your RV’s manual and within the vehicle.
These must be strictly adhered to by law.
No passengers may travel in towed vehicles
whilst in transit.
Getting Started

Owners Manual
| 9
Weight distribution
The performance of your vehicle and
weight of your caravan are very important
for towing purposes.
Check your vehicles Owner’s Manual for
the information on your vehicles towing
capacity or consult your authorised Talvor
Sales Centre.
To ensure safe towing and reduce possible
swaying, both caravan and the tow vehicle
should be level.
The reason one or both are not level could
be:
1. Incorrect ball height.
2. Uneven loading of gear in the caravan.
3. Lack of proper towing equipment.
4. Incompatibility between the caravan
and the towing vehicle.
To check for the correct ball height,
measure from the ground to the centre
of the coupling. Then compare this
measurement with the height of the tow
ball on the towing vehicle. These two
measurements should be the same, plus or
minus 20mm, if this is not the case, the ball
mount or tongue may need to be adjusted
or altered.
Industry guidelines for ball weight
recommend it be between 8 to 15% of the
loaded weight of the unit. This may vary
based on tow vehicle type, van type, road
conditions and personal preferences, we
recommend you pay attention to this issue
and establish a comfortable safe tow ball
loading to suit your vehicle combination.
Some packed items may need to be moved
to achieve the ideal weight. Uneven weight
distribution on the tow vehicle can affect
performance and safety.
Even when the rear of the tow vehicle
drops very little, weight is taken off the
front wheels. Whenever weight is taken off
the front wheels, the braking and steering
(and on front drive vehicles, the traction)
can be affected. To overcome this, load
levellers may need to be tted. Correctly
tted levellers will assist the tow vehicle and
caravans to be level and towed safely.
Mass denitions
Tare: Un-laden weight of the caravan
(not connected to the tow vehicle) without
water or gas.
Gross Trailer Mass (GTM): Maximum
loaded weight on the tyres (connected to
tow vehicle).
Aggregate Trailer Mass (ATM):
Maximum loaded total weight (not
connected to tow vehicle)
Tow ball Weight: Un-laden down
weight at the coupling.
Before you tow
Make sure you do not exceed the A.T.M.
weight of your unit which is stated on your
VIN plate.
Refer to your VIN plate and subtract the
tare weight from the A.T.M. to arrive at the
maximum authorised payload. i.e. A.T.M.
2500kg – Tare 2100kg = Payload 400kg.
Ensure your tyres are in good condition
and are inated to the correct pressure.
Refer to the vehicle’s tyre placard for correct
pressures.
Check wheel nut torque; refer to the
“wheel mounting” section in this manual.
Before towing your vehicle, ensure that the
coupling is correctly tted and the electrical
plug and safety chains are connected and
that all external lights are working.
Caravan Towing Tips

TALVOR
10 |
On the road
The rst time you tow, spend an hour or
so driving gently around quiet roads. Build
your condence by getting the feel of your
combined vehicles.
Take each gear shift gently and allow
the revs to build up before shifting.
When driving downhill, use the gears in
conjunction with your brakes.
Extra consideration is required when driving
in wet conditions involving longer braking
distances and slower cornering speeds.
Remember that the caravan wheels don’t
exactly follow the car wheels; they slightly
cut corners, so make allowances for this.
Your caravan is wider than your car, allow
for this when overtaking or pulling to the
side of the road or entering gateways.
When turning corners, travel further
forward in a straight line before you turn,
in order to give your van plenty of room to
negotiate the corner.
Reversing the caravan is actually quite
simple. The basic principal is to turn the car
wheels in the opposite direction you would
if the car was on its own. This will push the
unit in the desired direction.

Owners Manual
| 11
Motorhomes &
Campervans
• Check site is level, free of ant nests,
dangerous branches or other overhead
obstructions.
• Position RV on selected site.
• Lower stabiliser legs (selected models).
• Turn on gas bottles and check for leaks.
• Fill water tank if necessary or connect
hose for town water pressure (selected
models).
• Connect grey water hose.
• Connect electric power lead.
• Turn on power to refrigerator.
• Open roof hatches and windows.
Additional steps for
caravans
• Apply hand brake to caravan and/ or
place chocks under caravan wheels.
• Unplug power lead between car and
caravan.
• Undo safety chains
• Clamp jockey wheel rmly into position.
• Raise draw bar to clear tow ball by using
jockey wheel.
Set Up

TALVOR
12 |
Depending on the model of your Talvor
Product some items listed may not be tted
to your RV.
Most of the appliances tted have
instructional information issued by the
manufacturer which you will nd either
afxed to the appliance or in your Owner’s
Pack.
All appliances are tted in accordance with
the manufacturer’s specications.
You should read the operating instructions
before using the appliance.
Most of the appliances carry their own
warranty and after sales support.
Follow the manufacturer’s directions for
assistance. We recommend you complete
and return your warranty Card/Certicate as
this will assist you should a problem occur
at a later date.
Refrigerator
Please refer to the refrigerator user’s manual
provided with the RV before operating your
refrigerator.
Your Talvor Product is equipped with either
a two way or a three way refrigerator.
Two way refrigerators operate on 12V or
240V while three way refrigerators operate
on 12V, 240V or Gas.
Some refrigerators are equipped with an
Automatic Energy Selector (AES) that selects
the available energy source automatically.
The selection sequence is 240V, 12V LPG.
On some models energy selection must be
done manually.
IMPORTANT:
• Do not use gas when the RV is in
motion. Switch your refrigerator to
12V and turn off the gas bottle at
the bottle valve, on selected models
turn the AES function on.
• When you store the RV or switch off
the refrigerator, keep the refrigerator
door opened slightly to prevent
mould and odour building up inside.
• Ensure that all ventilation to the
refrigerator is maintained in a clear
and unblocked condition. Do not
tape over or block the vents for
any reason. Overheating of the
refrigerator components can lead to
poor refrigeration in the cabinet.
Air conditioner
The air-conditioning units operate on 240V
only. The RV must be connected to Mains
power or, in selected models, generator
must be running.
For details regarding operating the air-
conditioning unit refer to the Manufacturer’s
Manual supplied with the RV.
Stove, grill and oven
To use the gas stove and oven, ensure the
gas bottles are opened and ensure sure
the separate gas shut off valve is switched
on. For models tted with electric stoves
connect the RV to 240V before use.
Turn the stove and range hood master
switch to the on position at the main
switchboard.
Appliances & General Equipment

Owners Manual
| 13
For further instruction on how to use the
stove and oven consult the Manufacturer’s
Manual supplied with the RV.
IMPORTANT:
Stoves and cookers tted with glass
covers can become very hot do not
touch after use to avoid injury.
Battery charger
The RV is equipped with an automatic
battery charger. The charger starts working
when the vehicle is connected to 240V
supply, or when the vehicle engine is
running and the start battery reaches its
charge requirement.
Please refer to the Manufacturer’s Manual
provided with the RV for operation and
setting preferred charging programs.
Microwave
The microwave will only function on 240V
in most models.
Please refer to Manufacturer’s Manual for
operation.
Please remember to remove and secure
cooking plate before transit.
TV, DVD player and
entertainment unit
Please refer to Manufacturer’s Manual for
operation.
Antennas
Some models are equipped with a xed
antenna, others with a wind up antenna.
Wind up antennas should always be
securely stowed away while travelling. In
the case of high winds, antennas should be
removed and stored away as the structures
are not designed to withstand strong wind
conditions.
Refer to Manufacturer’s Manual for further
details and trouble shooting.
Hot water system
Most models are equipped with a hot water
system which is electrically ignited, and
fuelled by LPG. Some models are heated by
240V also.
To operate:
• Ensure gas has been turned on, at the
bottle(s) and shut off valve.
• Switch on the water pump at the main
switchboard.
• Ensure the fresh water tank has
sufcient water.
• Switch on the water heater itself. This is
very important to avoid causing damage
to the heater when running without
water.
• Turn on hot water tap to clear the lines
of air.
For further information on use, setting,
troubleshooting or specications, refer to
the Manufacturer’s Manual supplied with
the RV.
IMPORTANT:
Please make sure that the water pump
is also in use whenever you switch on
the water heater, even when the system
is pressurised by town water system’s
pressure.
Failure to follow manufacturer’s
instructions could greatly reduce the
service life of the HWS.

TALVOR
14 |
Gas cylinders and
regulator
The main valve on the LPG container should
be tightened by hand only, using caution
not to over tighten.
Handle your LPG bottles with care. When
connecting or disconnecting your gas
bottle, the connections are left-hand
threads. Always have your gas cylinder valve
closed when travelling or not in use.
Your gas regulator is factory preset and
you should never attempt to reset the gas
regulator yourself. Only allow licensed gas
tters to make any adjustments to your
regulator or the RV’s gas system.
IMPORTANT:
Never rell your RV gas cylinder with any
gas other than LIQUID PROPANE GAS
(LPG) from an authorised distributor.
If you smell gas:
1. Extinguish all open ames, pilot
lights and smoking materials.
2. Keep bystanders away.
3. Do not touch electrical switches
4. Shut off the gas supply at the
cylinder valve.
5. Open doors and other ventilating
openings.
6. Leave the area until the odour clears.
7. Have the gas system checked and
leakage source corrected by a
licensed gas tter before using the
system again.
Gas cylinders generally have a life of ten
years after which time they have to be
restamped and certied by an authorised
company to ensure that your gas cylinders
are in safe working condition. Where
possible, in exposed salty conditions, they
should be covered to avoid the build up
of rust and you should always ensure that
the valve on the gas cylinder is turned off
before travelling and when storing your RV
for any length of time. Gas legislation may
vary from state to state, so it is the owner’s
responsibility to comply with relevant laws.
BBQ
Some Talvor models are equipped with a
BBQ. Please make sure it is securely stowed
by locking it in place before travel.
Please refer to the Manufacturer’s Manual
for operation.
Electric bed lift systems
The bed is moved up and down by an
electric motor and controlled by an electric
switch, the location of the switch may vary
dependant on model.
Refer to Manufacturer’s Manual for
operation.
IMPORTANT:
• Do not operate the bed lift with
heavy load on it (max. 10 kg). Make
sure to take all bulky and heavy
goods off the bed before using the
bed lift.
• Ensure bedding is not on moving
parts or other stationary items in the
vehicle to avoid jamming.
• Make sure that the bed is raised
when you depart.
• Do not put any goods on the bed
during transit.

Owners Manual
| 15
Electrical bed slide
The bed is moved in and out by an electric
motor and controlled by an electric switch,
the location of the switch may vary
dependant on model.
IMPORTANT:
• Please make sure no objects are
obstructing the path of the bed slide
before operating switch.
• Ensure cushions are not on moving
parts or other stationary items in the
vehicle to avoid jamming.
Slide-out unit
The slide-out unit is controlled by an
electric switch located in the vehicle’s main
switchboard. It also has a manual override
accessible from the outside of the vehicle
(winder handle required).
Before operating the slide out lounge please
familiarise yourself with the unit and refer
to the Manufacturer’s Manual provided with
the RV.
Please be aware that the slide-out unit is
equipped with a safety switch that will not
allow the vehicle to start until the unit has
been fully retracted.
Awning
There are different types of awnings
throughout the Talvor Product range.
Please refer to Manufacturer’s Manual for
operation and maintenance.
Please do not use the awning during rain or
windy conditions and please make sure it is
closed and secured before travel.
Hatches
Ensure that your hatch is completely closed
at all times prior to travelling as this could
not only let in excess dust and water but
could also cause damage to the hatch due
to excessive vibration when the hatch is
open.
Windows
Condensation may occur where there
is insufcient ventilation or in extreme
weather conditions. It is important to leave
the windows partially opened to maintain
adequate air circulation, particularly in the
bed ends of campers when in use. Secure in
closed position before travelling.
Water pump
The on/off switch for the water pump
is located at the main switchboard. It
is recommended that the pump switch
remains in the on position even when
connected to town water.
It is common that pumps will “cycle” when
stationary. This can be caused by uneven
vehicle levels or air in the lines. If this cycling
causes concern simply turn off pump when
not in use.
When travelling, make sure that the pump
switch is turned off.
Please refer to Manufacturer’s Manual for
further information on its operation.
Toilet
The toilet has a separate cassette waste
tank. Before you use the toilet please
switch on the water pump at the main
switchboard and refer to the Manufacturer’s
Manual for operation.

TALVOR
16 |
It is only possible to dispose of the contents
of the toilet in approved dumping stations
or through a normal household sewerage
system. This can often be done at caravan
parks with the permission of the park
owner. However it is advisable to check
with the park owner before discharging
any toilet material into sewerage lines as
the chemical deodorant contained in the
toilet can sometimes have effects on the
sewerage or septic system of the caravan
park. You should refer to the brochure
supplied with all chemical toilets for further
information on their care and maintenance.
Smoke detectors
Ensure the battery is correctly tted and
the smoke detector is checked regularly.
(Batteries are disconnected at time of
delivery to the dealer. Please check to
ensure it has been reconnected.)
Pop-top roof
When raising the roof of a Pop-Top you
must leave the main door open. If the main
door is closed during this raising operation
it can cause a vacuum inside the RV and
make the roof a little difcult to raise.
Generator
Some Talvor vehicles are equipped with
either a portable or xed generator and
they can be run on fuel or LPG. When
equipped with a xed generator, the on/
off switch will be located in the main
switchboard. If your vehicle is equipped
with a portable unit it will be stowed in a
locker equipped with a slide-out for easy
access.
Please refer to the Manufacturer’s Manual
for operation.

Owners Manual
| 17
Brakes
Talvor caravans are tted with electric
brakes. These brakes may, from time to
time need adjusting. It is suggested that
all caravans be returned to the dealer
after approximately 2000km to check the
brake adjustment. If brake adjustment is
required during or prior to this time you
should contact the nearest dealer or your
original caravan manufacturer, to ensure
that this brake adjustment is carried out by
an authorised person. This is a service
function not a warranty item.
Please refer to the electric brake handbook
supplied with the caravan at the initial
time of delivery to learn more about the
operation and maintenance of your electric
brakes.
The warranty card on the brakes should be
lled out and returned to the brake supplier
so that your warranty is registered.
Breakaway system
If your unit is tted with a breakaway
system, please refer to the supplied
operating instructions. A breakaway
system is standard equipment when GTM
exceeds 2000 kg. The breakaway system is
equipped with a 12V sealed rechargeable
5 amp battery and an in line charger.
Please refer to Manufacturer’s Manual for
further information on the operation and
maintenance.
Park brake cable
adjustment
In the laden condition it is imperative that
the park brake lever engages and secures
the brakes in the 5th or 6th notch of the
coupling, from the tow ball end. Failure to
adjust the cable tension in this manner will
through suspension movement, on both
independent suspension and beam axle
with leaf springs, cause the brake shoes to
be partially actuated and excessive heating
of the brake and drums to occur. Prolonged
use, if incorrectly adjusted, will initially
cause the back (secondary shoe) to overheat
causing disintegration of the brake lining
and will result in deterioration of brake
performance until eventual brake failure.
It is essential that the release of this hand
brake be carried out prior to travelling.
Please refer to the Manufacturer’s Manual
provided for more information.
Changing wheels
When changing wheels, only use the
jack mounting positions that are located
directly behind the axle on the main chassis
member or outrigger.
IMPORTANT:
• Do not get under a vehicle that is
only supported by a jack - always use
vehicle support stands.
• Use jack only with correct
engagement ttings.
• Never change a wheel on soft,
uneven or sloping ground.
• Do not remove wheel nuts until
wheel is off the ground.
• Do not allow passengers in your
vehicle while it is on the jack.
• Before use - read the label attached
to the jack.
• After use - ensure the at tyre and
jack are properly secured.
Caravan Equipment

TALVOR
18 |
Wheel mounting
It is important to maintain proper torque
specications to provide safe and secure
attachment of the wheel to the hub drum.
• Start all nuts by hand to prevent cross
threading.
• Tighten nuts in three stages using a
cross star pattern.
• Whenever wheels are removed and
retted the wheel nut torque should
be checked. Wheel nuts should be
tightened to a torque of 115 Nm (80 ft
Ib) for 1/2” diameter wheel stud threads
on steel rims and 122Nm (90 ft Ib) for
112” diameter wheel stud threads on
alloy rims.
It is recommended that the wheel nut
tension be checked every 100 km for the
rst 400 km of your initial caravan use
and then after every wheel change, every
1000km or every six months whichever
comes rst.
Bumper bars
Some bumper bars (where tted) have
been designed to carry a spare wheel.
The maximum carrying capacity of these
bumper bars is 30Kg. Please note a spare
wheel weighs approx. 27Kg. All other
bumper bars have not been designed to
carry a spare wheel. Any modications or
adding extra load will affect the towing
abilities of your RV and could cause
structural damage which will void your
warranty!
• Do not carry full fuel containers
on rear bumper bars.
• Do not add additional weight to
rear bumper bars.
Corner stabilisers
Corner stabilisers are designed so that
they stop the RV from tipping towards one
end as you walk inside it. They should be
lowered to the point where they touch the
ground in a rm manner without taking
any weight of the van. Remember they
are not jacks and should never be used
to take even partial weight of the van. As
you move inside the van from end to end
you cause more weight to be applied to the
stabiliser. You should therefore never use
force on the stabiliser handle to force the
stabiliser to the ground thereby taking the
weight off the van. Stabilisers that are bent
due to excess weight being applied to them
are not covered under warranty.
1
2
3
5
6
4

Owners Manual
| 19
Coupling
Couplings should be regularly checked
for any sign of loose bolts connecting the
coupling to the chassis as the two leading
bolts on the coupling are always under
a lot of strain. It is important that these
bolts be regularly checked to ensure that
they are tight. It is not advisable to grease
the ball of the coupling as this can lead
to a build-up of dust and thereby create a
signicant wear due to abrasion. A silicone
spray will be sufcient lubrication for the
ball. Light machine oil will also be effective
without accumulating dust which could
cause excessive wear. Please refer to the
manufacturer’s manual provided for more
information.
Jockey wheel
It is possible to grease the internal thread
of the jockey wheel. This can be done by
removing the jockey wheel so that the top
section of the jockey wheel comes away
from the bottom tubular section and you
can grease the internal thread of the jockey
wheel.
Chassis
It is advisable to have a thorough annual
check of the chassis on your caravan. This
includes the running gear, suspension,
tyres, wheels, and brakes and coupling. The
chassis is such an important part of your
caravan you cannot afford to overlook its
general maintenance and service.
Chassis galvanising
The chassis on your unit has been
galvanised to provide a thick tough metallic
zinc coating which is bonded metallurgically
to the steel base. It completely covers the
steel and protects it from corrosion in
normal environments. The metallic zinc
used in the galvanising process provides
long-term protection; however, owners
should regularly maintain the chassis
which involves promptly washing off
any potential contaminants with clean
water. Obvious contaminants are chloride
and sulphur compounds, including salts
from sea, air and soil. Such contaminants
can cause permanent staining of the
galvanised nish, for which Talvor cannot
be held accountable. Natural ageing of the
galvanised coating will turn the chassis to a
grey colour.

TALVOR
20 |
240V electrical system
The 240V electrical system has been tted
according to ASINZS 3000:2000. Under no
circumstances should any changes be made
to the electrical system or should any xed
appliances be added. Failure to comply
with this could render the electrical system
unsafe which could result in injury or death.
All repairs, alterations or service are to
be carried out by a licensed electrical
contractor. Keeping equipment clean and
dry is important, particularly the 15 amp
power lead.
Earth leakage circuit breakers have been
installed as standard equipment. A 15 amp
extension lead including an earth circuit is
also required.
Fire safety
All models are equipped with Fire
Extinguishers. These should always be
full and at the correct pressure. Annual
checking by an authorised agent is
recommended. Smoke detectors are tted
as standard equipment. Their operation
should be checked frequently and batteries
replaced regularly.
Make sure all cooking appliances are
switched off when not in use.
Safety during an
emergency stop
Please carry a warning device, i.e. Reective
Triangle, to be displayed when necessary.
Pull off the road as far as possible when
changing a tyre, or in other emergency
situations, remembering your unit is larger
than the tow vehicle. It is advisable that
everyone leaves the car and stays well clear
when it is parked on the edge of a road or
highway.
Exterior care
The exterior of your RV should be regularly
cleaned with soapy water. Extra care should
be taken, when cleaning windows, that a
harsh brush is not used on these surfaces as
the acrylic in the windows may permanently
scratch. In the case of rollout awnings,
these should also be occasionally washed
with warm soapy water and rinsed clean.
External sealants must be checked annually,
and repaired as they degrade over time.
Fibreglass nish
The breglass mouldings and side frames
are nished in a high gloss hard gel coated
nish and will provide many years of
trouble free use. To clean we recommend
an automotive type cleaner in warm water.
To protect the nish against long term UV
damage a good quality breglass or marine
polish is recommended at least four times
per year. Do not use automotive polish
as this can have ammonia in it which can
discolour the breglass.
Pop-top vinyl section
Use only spray cleaners on the Pop-Top
Vinyl section. Do not use abrasive cleaners.
Do not let mould build up on vinyl, as it can
stain.
Roof gas struts
Dust, grime and surface rust should be
removed regularly from the steel shaft of
the gas struts.
General Care and Maintenance