Tanz THAL/R400 Series User manual

PACKAGING CONTAINS
CD
21 Network camera 4Screws 3Anchors 6Power adaptor 5Allen key
CAMERA INSTALLATION
1IR light LED
2Lens
3IR light sensor
4Bracket fix release bolt
5Front camera opening
6LAN/POE connection
7Audio in (white) out (red)
8Alarm out (orange/purple)
9RS485 (white-yellow/green)
10
11 DC power in
CAMERA DESCRIPTION
1Select the installation area and mark the screw drill location, fix
the camera to the ceiling or wall depend the requirement, fix the
screws tightly.
2Unscrew the bracket bolts in order to set the camera right
position, the different bolts can help the cameras to tilt, turn
and even set parallel line.
3In order to have access to the camera inner part to set the lens
focus and zoom distance please turn anticlockwise direction the
camera front ring, hold the camera tightly and turn it. Once the
lens is settled close the housing clockwise tightly to avoid water
and dust get into the camera.
4Once the camera front ring is open you would find access to the
lens lavers, if the camera has remote focus there would not be
lavers as the setting of the zoom and focus is motorized.
3
1
2
4
5
THAL/R400 Series Quick Installation Guide
CLOSE
OPEN
7Drill template
6
8
9
10
11
7
Alarm (red/black)

6Once the camera is correctly installed please close the housing
tightly to avoid water or dust to get into the cameras, follow the
camera user manual for have access to the setting interface.
5To have access to the local storage slot, once the camera front
ring is opened unscrews and pull gently from the camera body
to have access to the memory slot.
SD CARD SLOT
THAL/R400 Series Quick Installation Guide