Tanz THA300 User manual

PACKAGING CONTAINS
CD
21 Network camera 4Allen key 3Power adaptor 6Drill template 5Anchors and screws
CAMERA INSTALLATION
2LAN connection
3Lens head fixation screw
4IR light and light sensor
5Local storage
6Reboot button
CAMERA DESCRIPTION
1Remove the cover screws to have access to the camera inner
side and to be able to screw it to a wall or ceiling. 2Release both lens head screws so the lens can be move
up and down to find the right position, once the view angle
is found tight both side screws again.
THA300 Quick Installation Guide
2
3
4
5
7
1
6
1DC power connection
7Lens

3The lens head can also rotate slightly to find a better view angle. 4Connect the LAN cable to the RJ45 connector.
CAMERA INSTALLATION
5
Before closing the minidome cover you can insert a memory
card in the local storage slot.
6Locate the camera in the right position and fix with the screws.
7Before closing the cover ensure the silicon gasket is clean. 8Close tightly the cover screws to avoid dust and water getting
into the camera.
THA300 Series Quick Installation Guide