TASSLOCK Defender LED User manual

Tasslock Defender LED
User Manual

Tasslock Defender LED
User Manual
Remember without the ignition confirmation sound the
motorcycle will not start.
Auto and manual unlock
1. After turning off the engine Motorcycle will be locked
automatically once the remote moves away 5 meters plus
distance. Motorbike indicator will flash once for
confirmation.
2. Motorcycles will be automatically unlocked when the main
remote comes in the 5 meters range.
3. To unlock manually press 1 time. The notification will
sound and indicators will flash twice.
4. To lock manually press 1 time. The notification will
sound and indicators will flash once.
5. To activate the silent lock mode press and hold for 2
seconds. Indicators will flash once and the motorcycle will
be locked in silent mode.
6. To activate the silent unlock mode press and hold for
2 seconds. Indicators will flash twice and the motorcycle
will be unlocked in silent mode.
7. In case of no confirmation sound after key in press
once.
8. To activate PKE (Passive Keyless Entry) Mode press
twice. Motorbike ignition will turn on with confirmation
sound.
9. In case of any unwanted or threatening situation press
and run away. The engine will be immobilized and will not
start.
10. To turn off the engine silently press and hold for 2
seconds.
11. Built in LED indicator will show lock status. If it blinks Red it
means the motorcycle is locked. If Blue it means unlocked.
12. To locate your motorcycle from a distance press . The
indicators will flash and notification will sound 5 times.
13. The device will automatically be armed once the ignition is
turned off. Moving away for 5 meters will immobilize the
engine.
14. Press and hold for 3 seconds to check the main
remote battery level. The blinker will flash according to
battery level. 6 times means full charge, 1 time means low
battery.
15. After pressing or if there is no light blinking it
means the remote is out of range. But the motorcycle is
still immobilized.
16. While using backup remote to start the motorcycle must
press to activate the ignition.
17. In case of any unwanted or threatening situation press
and run away. The engine will be immobilized and will not
start. A 125 dB alarm will be triggered.

Tasslock Defender LED
User Manual
18. While riding in PKE mode press to turn off the engine.
19. If robbers snatch motorcycle while driving in PKE mode
press once. The engine will be immobilized and a 125
dB alarm will be triggered.
20. To change the vibration sensitivity mode press and hold
and then press 3 times and release both buttons.
Notification will sound 3 times. It means now the
motorcycle vibration sensitivity level is set to level 3. Same
way you can choose between level 1 and level 5.
21. To activate remote silent mode press and hold for 5
seconds. The remote will vibrate confirming the silent
mode. To deactivate press and hold for 5 seconds.
The remote will sound alarm confirming the deactivation.\
22. To change auto unlock range press and hold and then
press 21 times for 1 meter, 22 times for 2 meters, 23
times for 3 meters, 24 times for 4 meters and 25 times for
5 meters.
23. To turn on hazard warning light press then press and
hold until the notification sound. To turn off ress
once.
Some important features. (Motorbike ignition should be
turned on)
1. Turning on Indicator notification: Press and hold and
then press 3 times, then release both. Indicator light
will flash 3 times for confirmation.
2. Turning off Indicator notification: Press and hold and
then press 4 times, then release both. Indicator light
will flash 4 times for confirmation.
3. Turning on parking lock: Press and hold and then
press 5 times, then release both. Indicator light will
flash 5 times for confirmation.
4. Turning off parking lockPress and hold and then press
6 times, then release both. Indicator light will flash 6
times for confirmation.
5. Turning on Builtin lock: Press and hold and then press
7 times, then release both. Indicator light will flash 7
times for confirmation.
6. Turning off Builtin lock: Press and hold and then press
8 times, then release both. Indicator light will flash 8
times for confirmation.

Tasslock Defender LED
User Manual
7. Turning off Auto remote: Press and hold and then
press 12 times, then release both. Indicator light will
flash 12 times for confirmation.
8. Factory Reset: Press and hold and then press 15
times, then release both. Motorcycle will sound a
confirmation tone on factory reset.
Common Faults and Solutions
Note: If you cannot solve the above faults with the
solutions given. Then contact the Helpline 01715593468
or Contact the Supplier. Try Resetting the Remote first.
DO NOT OPEN THE DEVICE OR REMOTE. IT WILL VOID
YOUR WARRANTY.
WWW.TASSLOCK.COM All Rights Reserved
Fault
Cause and Solution
No response after button press
Low battery or remote broken
Host without response after turn signal flash
Alarm horn wire cut or broken
After start the ignition lock and with right respond after press the
button of controller, the vehicle cannot start
1. Low battery on vehicle or battery wire poor contact. 2.
Solution of the situation Low battery on vehicle or battery wire
poor contact: Start the ignition lock, press the unlock button and
ring unlock tone, but do not press the start button, shift downhill
directly traction to start the engine
Vehicle Cannot start
1. Check the battery.
2. Check the ignition lock, start ignition lock, check whether the
turn signal and indicator of meter is normal, if it is normal,
please check whether the ignition lock is broken or battery fuse
is short circuit