Tatung TX-3000 User manual

2006/8/23 page1
TATUNG
Wireless Thin Client
TX-3000

TATUNG Wireless Thin Client (TX-3000) User Guide
Copyright
In the interest of continuing product improvement, TATUNG Co. reserves the right to change product specifications
and information in this document without notice.
TATUNG Co. makes no warranty of any kind with regard to this document, including, but not limited to, the implied
warranties of merchantability and fitness for a particular purpose. TATUNG Co. shall not be liable for any errors
contained herein or for incidental or consequential damages in connection with the furnishing, performance, or use of
this document or the examples herein.
© TATUNG Co. All rights reserved.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this
document may be photocopied, reproduced, adapted, or translated to another language without the prior written
consent of TATUNG Co., except as allowed under the copyright laws.
The programs that control this product are copyrighted and all rights are reserved. Reproduction, adaptation, or
translation of those programs without prior written permission of TATUNG Co. is also prohibited.
Tatung is the registered trademark of TATUNG Co.
Microsoft, Windows XP embedded, and the Windows logo are either registered trademarks or trademarks of
Microsoft Corporation in the United States and/or other countries. Microsoft products are licensed to OEMs by
Microsoft Licensing, Inc., a wholly owned subsidiary of Microsoft Corporation.
All other brand names and products names used in this document are trade names, service marks, trademarks, or
registered trademarks of their respective owners.
TATUNG Co.
22 Chungshan North Road, Section 3
Taipei, Taiwan 104
R.O.C.
http://www.tatung.com

TATUNG Wireless Thin Client (TX-3000) User Guide
Messages
Messages are used in this document to bring important information to your attention. Different types of messages are
defined as follows:
CAUTION!: A Caution alert informs you that improper use of equipment or failure to follow safety instructions may
cause data loss or equipment damage.
WARNING!: A Warning alert informs you that improper use of equipment or failure to follow safety instructions may
cause bodily injury.
NOTE!: A Note is an advice that helps you make the best use of TX-3000.
Safety Instructions
You must read through all safety instructions before using TX-3000. The following information contains concepts that
you must fully understand in order to avoid property damage or body injury.
CAUTION!
•Always use standard battery packs supplied with the TX-3000. Other battery packs may have different
specifications and cause damages to TX-3000.
•Do not expose the battery pack to other metal objects.
•Do not use or place TX-3000 near sources of heat or expose it to direct sunlight for an extended period of time.
Store it in a cool and dry place.
•Do not push or apply force to the TFT screen.
•Do not use pens or sharp objects to write on the screen. Always use the stylus to tap or draw on the TFT screen.
WARNING!
•Using worn-out or damaged power cords may result in electric shock or fire.
•Avoid keeping a steady position when using TX-3000 for prolonged period of time. Periodic exercises and
breaks are recommended to prevent any physical discomfort.
•Always contact an authorized TATUNG service provider for assistance if any repair or adjustment is required.

TATUNG Wireless Thin Client (TX-3000) User Guide
Table of Contents
1. Overview............................................................................................................................................................ 5
2. Equipment Checklist........................................................................................................................................ 6
3. TX-3000 Specification ...................................................................................................................................... 7
4. TX-3000 Features.............................................................................................................................................. 8
4.1 Front View of TX-3000 .................................................................................................................................................8
4.2 Top View of TX-3000..................................................................................................................................................10
4.3 Left View of TX-3000..................................................................................................................................................10
4.4 Right View of TX-3000 ...............................................................................................................................................11
4.5 Back View of TX-3000................................................................................................................................................12
5. Quick-Start Procedure ................................................................................................................................... 13
5.1 Starting TATUNG TX-3000 ........................................................................................................................................13
5.2 Booting Logo..............................................................................................................................................................15
5.3 Device Settings ..........................................................................................................................................................16
5.4 LCD Panel Setting......................................................................................................................................................17
5.7 Recalibrating the Touch-Screen.................................................................................................................................20
5.8 Using the Input Method..............................................................................................................................................22
5.9 Resetting TX-3000 .....................................................................................................................................................23
6. Software Applications.................................................................................................................................... 24
7. Restrictions..................................................................................................................................................... 25
8. Troubleshooting ............................................................................................................................................. 26
9. Support and Service....................................................................................................................................... 28
10. Warranty........................................................................................................................................................ 29
11. Regulatory and Safety Notices ................................................................................................................... 34

TATUNG Wireless Thin Client (TX-3000) User Guide
1. Overview...........................................................................
Welcome to choose TATUNG
®
Wireless Thin Client
TM
. This wireless device is designed to support customers in
building a customizable product for different vertical markets. Both first-time and experienced users can quickly
learn how to operate the TATUNG Wireless Thin Client from this guide.

TATUNG Wireless Thin Client (TX-3000) User Guide
2. Equipment Checklist........................................................
Carefully unpack the TATUNG Wireless Thin Client from the box. Check to make sure that the following accessories
are included in the box. If you find any accessory missing or damaged, please contact TATUNG representatives
immediately.
;TX-3000
;Stylus
;AC Adapter
;AC Power Cord
;Battery Pack
Embedded Accessories
;Backup Battery
;RTC Battery
;CompactFlash Storage Card
;802.11g WLAN Card

TATUNG Wireless Thin Client (TX-3000) User Guide
3. TX-3000 Product Specification .......................................
Items Specification
CPU AMD LX800 built-in processor
OS Microsoft Windows XP EmbeddedSoftware Bundle software Trail Soft Keyboard
Memory DDR400 Memory
Storage Compact Flash
Type 10.4 inch color LCD
Resolution 1024 x 768 16bit 65536 color
10.4" Toshiba LCD resolution: 1024x768(XGA) and
transmissive display type (Default).
Display
Life time 10,000 hrs (Lamp MTBF Life)
Touch panel Yes. with Stylus Pen
Button 4 programmable button
Network 802.11b/g (Wireless) and 1Gbp/s (Wired, RJ-45)
Audio Internal speaker (Mono) x 1
Internal microphone(Mono) x 1
USB USB2.0 x 2
Card slot PCMCIA Type-II (Card Bus type) x 1
I/O connector RJ-45, RS232C, VGA-Out (3 in 1 connector)
I/O
Audio Headphone terminal x 1
Microphone terminal x 1
Power Li-ion Battery pack, AC adapter
Main battery Type Rechargeable Li-ion battery, 2200mAh, 11.1V
Operation time About 2hrs
Charging time About 2.5hrs
Type Rechargeable Ni-MH battery, 40mAh, 7.2V
Backup time About 30min ( system in suspend mode)
Back up battery
Charging time About 12hrs
Type Rechargeable Li-battery, 100mAh, 3VRTC battery Charging time About 50hrs
Size, Weight 290 x 220 x 31(Min)mm, About 1.5kg
Operation Temp.:5 to 35 deg. cent., Humidity: 15 to 85%Environment Storage Temp.:-20 to 60 deg. cent., Humidity:15 to 85%
Terminal FCC, CE,CB, CSACertification AC adapter Electrical appliance and Material Safety Law
OS Windows XP Embedded (Default)

TATUNG Wireless Thin Client (TX-3000) User Guide
4. TX-3000 Features .............................................................
4.1 Front View of TX-3000
1. Push function key 1, and you can execute “On Screen Keyboard”.
2. Push function key 2, and you can execute “Internet Explorer”.
3. Push function key 3, and you can execute “File Manager”.
4. Push function key 4, and you can execute “Device setting” utility, which is developed by
Tatung. It includes four functions: brightness adduction, double-tap setting, button setting,
and touch panel calibration.
5. Direction Key
6. Enter Key
7. Power LED
8. Battery Charge LED
9. RF Strength LED
10. Built-In Microphone
11. Built-In Speaker
12. TFT Touch-Screen Panel (Perform operations and input data by tapping and writing directly on
the screen)

TATUNG Wireless Thin Client (TX-3000) User Guide
TX-3000 LED indicators display useful information in the battery’s current status and charge level:
LED
Indicator
LED Color Power LED Battery Charge LED Wireless Signal LED
Off Power Off or
Suspend Mode Not Charging Signal Strength =0
(No signal)
Green Power On Fully Charged Signal Strength =4,5
(Excellent)
Amber Low Battery <=8% Charging Signal Strength =2,3
(Good)
Red Extremely Low Battery
(Auto Suspend) <=4% Charge Error (Or No Battery Installed) Signal Strength =1 (Very Low)

TATUNG Wireless Thin Client (TX-3000) User Guide
4.2 Top View of TX-3000
1. I/O Connector
2. Reset Button
3. USB 2.0 Port
4.3 Left View of TX-3000
1. PC Card Slot (PCMCIA Type II)
2. Headphone Jack
3. Microphone Jack

TATUNG Wireless Thin Client (TX-3000) User Guide
4.4 Right View of TX-3000
1. Power Button
(1) Pressing and holding the power button for more than 4 seconds will power off the system.
(2) Quickly tapping and releasing the power button will put the system into suspend mode. Re-tap the
power button again to resume operation.
2. Stylus
3. USB 2.0 Port
4. DC-In Jack

TATUNG Wireless Thin Client (TX-3000) User Guide
4.5 Back View of TX-3000
1. Battery Connector Cover
2. Battery Pack
3. Battery Latch
4. Battery Release Switch
5. IDE Compact Flash Card Slot Cover
1. Backup Battery and RTC Battery Cover
2. Back Stand / Handle

TATUNG Wireless Thin Client (TX-3000) User Guide
5. Quick-Start Procedure.....................................................
5.1 Starting TATUNG TX-3000
TX-3000 has two power sources, battery or AC (using the AC/DC converter).
To operate the device with AC power, perform the following steps:
In order to prevent accidental data lost, we strongly suggest you to insert the battery pack.
(1) Insert the battery pack into the Battery
Slot.
(2) Lock the battery latch.
NOTE! The system would not power on if the battery latch was not in the locked position.

TATUNG Wireless Thin Client (TX-3000) User Guide
(3) Plug one end of the AC adapter into the DC-
In jack and plug the other end into an
electrical outlet. The power source can range
from 100 to 240 Volts at 50 or 60 Hz.
(4) Turn on TX-3000 by pressing the power
button.
(5) The system is turned on.

TATUNG Wireless Thin Client (TX-3000) User Guide
5.2 Booting Logo
When the user turns on TX-3000, the Microsoft Windows XP embedded logo is displayed on the screen while the
system is booting up.

TATUNG Wireless Thin Client (TX-3000) User Guide
5.3 Device Settings
TX-3000 uses the standard Microsoft Windows XP user interface. But we create a new program which will help you
to set the TX-3000 easier.

TATUNG Wireless Thin Client (TX-3000) User Guide
5.4 LCD Panel Setting
You can adjust the brightness of the LCD panel by the Device Setting utility program – brightness tab.
(1) Press the function key 4, and you will see the “Device Setting” window (As in the figure).
(2) Please kick the “Brightness” button.
(3) You can adjust the brightness level according to your personal preference.

TATUNG Wireless Thin Client (TX-3000) User Guide
5.5 Double-Tap Setting
You can also change the double-tap speed in Device Setting utility program.
(1) Press the function key 1, and you will see the “Device Setting” window (As in the figure).
(2) Please kick the “Double-Tap Setting” tab.
(3) You can adjust the speed and the distance of the double tap according to your personal preference.

TATUNG Wireless Thin Client (TX-3000) User Guide
5.6 Button Setting
We provided four function keys. They can help you to quickly launch programs. You can change the setting to suit
your requirements.
(1) Press the function key 1, and you will see the “Device Setting” window.
(2) Please kick the “Botton Setting” button. (As in the figure)
(3) You can change the button setting for your own needs.
NOTE! The default settings of these four function keys were shown as follows:
Button 1: On Screen Keyboard
Button 2: Internet Explorer
Button 3: Windows Explorer
Button 4: Device Setting

TATUNG Wireless Thin Client (TX-3000) User Guide
5.7 Recalibrating the Touch-Screen
If the user finds that TX-3000 is responding bluntly to stylus taps, the user will need to recalibrate his screen.
Follow the instructions below.
(1) Launch the Device Setting Utility program.
(2) Please click the “Calibration” button.