TCL ALTO 9+ User manual

Quick Start Guide
ALTO 9+
RAY·DANZ 3.1
Dolby
Atmos Sound Bar with Wireless Subwoofer


1
Register Your Product Register yourTCL Soundbar to receive
the latest news on product releases,
promotional offers, and more!*
Enjoy exclusive benefits with registration:
Text a photo of the
camera icon to 71403
Or register online at www.register.tcl.com
Need help? Visit photoregister.com/help
or text HELP to 71403
TCL395
Text to Register
Expedited support and service Insider tips on your soundbar
Exclusive offers and promotions Verification of ownership
*Only Available to U.S. Customers

1
Safety
instructions
QSG
AC power cord x 2
HDMI cable
Optical cable Remote control AAA battery x 2
Wall mount bracket x 2 Wall bracket screw x 2 Wall anchor x 2 Wall mounting screw x 2
Wall mount templateQuick start guideSafety leaflet
Warranty
card
Warranty card
What's in the box
Make sure you read all the safety information
before you use this product.
Sound Bar main unit Subwoofer

HELLO
2a
Overview
Press to select the Bluetoothsource.
Press and hold to enter pairing mode.
Press to switch the audio source
among HDMI IN/HDMI ARC/
AUX/BT/Optical/USB modes.
Press to increase
or decrease the
volume level.
Remove the back cover of your
Sound Bar
Sound Bar main unit
Green/red LED:
LED display:
Volume buttons:Source button:Power button:
Bluetooth button:
Indicates the Sound Bar
status (e.g. volume level,
sound source mode, etc).
Indicates Wi-Fi connection
(e.g. Green: connected.
Red: disconnected).
Press to turn on or enter
SLEEP mode. Long press
to turn off (Standby)

2b
Overview
AC input power connector

> 2"
TV
TV
3b3b
3a
1
3
2
5
6
< 9.8'
TV
437.4"
Place your Sound Bar and
Subwoofer
The ideal place to position the Sound Bar is
centered underneath your TV.
For the Subwoofer working correctly, it should
be less than 9.8 feet from the Sound Bar.
Wall mount your Sound Bar
Required tools:
• Place the supplied wall mount template on
the wall. Make sure the wall mount template
is at least 2 inches below the center of
the TV.
• Use a level to make sure the wall mount
template is positioned accurately.
• Use the tape to stick the wall mount template
firmly on the wall.
• Mark on the wall using each marking on
the template through the mounting holes.
• Take away the wall mount template.
• Drill a screw holeat each marking on the wall.

3b
10
7 8 9
11
41.3"
Wall mount your Sound Bar
Required tools:
• Insert the supplied wall anchors into 2 screw
holes on the wall.
• Insert the supplied wall bracket screws
through the wall brackets into the wall
anchors.
• Fix and tighten the wall bracket screws on
the wall.
Required tools:
• Insert the supplied wall mounting screws into
the screw holes in the back of the Sound Bar
main unit.
• Hang the Sound Bar main unit on the wall
mount brackets.

Connect the Sound Bar with your TV through
the supplied HDMI cable.
Connect the Sound Bar to the power supply
with the supplied power cord.
4
Connect to your TV
4a
HDMI-ARC
There are 3 ways to connect in order of best
performance: HDMI-ARC (refer to 4a), Optical
(refer to 4b) and AUX (refer to 4c)

4b
Optical
Connect the Sound Bar with your TV through
the supplied Optical cable.
Connect the Sound Bar to the power supply
with the supplied power cord.

4c
Connection
Connect the Sound Bar with your TV through
AUX cable (not supplied).
Connect the Sound Bar to the power supply
with the supplied power cord.

4
Connect Blu-Ray player to
HDMI-IN (Optional)
4d
Connect your Blu-ray player to HDMI-IN
to be able to enjoy Dolby TrueHD based
Atmos content.

5a
1 2 3 4
Install or replace the remote
batteries
5b
Using the Remote
Battery type: 1.5V AAA Alkaline battery x 2
Power on
Press to switch the
audio source input.
Previous in Bluetooth/USB mode.
Volume+/-
Bass+/-
Treble+/-
Mute/Unmute
Next in Bluetooth/USB mode.
Press: Sleep
Long Press: Standby
Press to enable/disable vertical
surround effect when playing
ATMOS content.
Press to select the equalizer
(EQ) among MOVIE, MUSIC,
TV, BOOST.
Adjust delay time from
20ms to 500ms.
Play/pause/resume playback in
Bluetooth/USB mode.
Press and hold to activate the
pairing function in Bluetooth
mode or disconnect
the paired device.

3
5
4
2
1
TCL Alto 9+
You can stream music from your mobile device
via Bluetooth.
1. Press .
2. Press .
3. Press and hold on the sound bar or
“Play-Pause/OK” button on your remote
control.
> PAIR is flashing on the LED display. The
Sound Bar is ready to pair.
4. Power on your Bluetooth device and activate
its Bluetooth function.
5. Select TCL Alto 9+.
> You hear a sound signal.
> Pairing is successful.
6. If you want to re-pair with another device,
6a
Pair with your
Bluetooth device

6b
1. Power on the sound bar.
2. On an Android phone, open the Google
Home app and continue with step 3a, on an
iOS device, go to Settings - Wi-Fi and
continue with step 3b.
3a. In the Google Home app, make sure you
are signed in and follow the on-screen
instructions to complete the setup process.
3b. In Settings - WiFi, look for "TCL RAY-DANZ"
under "SETUP AS NEW AIRPLAY SPEAKER"
and complete the setup process.
4. Once setup is complete via either 3a or 3b,
you can now enjoy both Chromecast built-in
and AirPlay from any device on the
same network.
5. After this setup you may see an message on
the sound bar display that there is new
software available (NEW SW OK/NOT").
Please press “Play-Pause/OK” button on
your remote control to download software
and upgrade your sound bar or any other
key to skip for now.
Note:
In Standby mode, holding the "Play-Pause/OK"
key for 5 seconds will bring you to the system
settings menu. You can navigate with VOL +/-
and select options with "Play-Pause/OK". This
menu allows you to reset the system to factory
settings and may offer additional settings.
Set up Wi-Fi connection
for music streaming
2
3
1
TS9030 ATMOS SB-xxxx
TCL RAY-DANZ
NEW SW OK/NOT
UpG ok
5
4
To control this AirPlay 2–enabled speaker,
iOS 11.4 or later is required.
Apple, AirPlay, Apple TV, Apple Watch, iPad,
iPad Air, iPad Pro, iPhone, and Lightning are
trademarks of Apple Inc., registered in the
U.S. and other countries..
Google, works with Google Assistant and
Chromecast built-in are trademarks of Google LLC.

7
Sound Bar status
Power on
Power off
Sleep
Standby
Bluetooth
Optical
HDMI IN
AUX
HDMI ARC
USB
Searching mode (flashing)
Pairing mode
Volume level
Minimum volume reached
Maximum volume reached
Mute
BASS
TREBLE
SURROUND ON
SURROUND OFF
Sound Bar status
HELLO
STANDBY
SLEEP
.
BT
OPT
HDMI1 IN
AUX
HDMI2 ARC
USB
BT
PAIR
VOL08
V MIN
V MAX
MUTE
BAS+3
TRE-3
SUR ON
SUR OFF
Power
Source
Bluetooth
Volume control
Bass/Treble
Vertical surround mode
Sound modes
Movie, Music, TV, BOOST
MOVIE MUSIC TV BOOST
Sound modes
Unsupported format
USB unavailable
Audio format detected
NONSUPPORT FORMAT
NO USB
PCM AUDIO / DOLBY AUDIO /
DOLBY ATMOS
The LED display on the front of the Sound
Bar gives you information on the status of
the Sound Bar.

FAQ
Does this Sound Bar work with any TV?
Yes, the Sound Bar is compatible with any TV that has one of
the ports below:
1. HDMI supporting ARC (preferred)
2. Optical audio output (TOSLink)
3. Headphone output
When the Sound Bar and TV are both on, there is an
echo effect.
Simply mute the TV speaker to have the Sound Bar as the
singular source of sound.
How many sound modes are available?
Four sound modes - Movie, Music, TV and Boost.
How do I get the best Wi-Fi connection?
• Ensure your Wi-Fi router is not too far away from the sound
bar and preferably in line of sight.
• High levels of data traffic over the Wi-Fi network can affect
the sound bar Wi-Fi performance.
How to identify network connection status?
After the Wi-Fi connection has been established (refer to 6b),
every time the display is active, the green LED indicates Wi-Fi
is successfully connected. When the LED is red it indicates
there is a connection problem, please check your network and
if needed repeat the Wi-Fi setup (refer to 6b).
What are the subwoofer LED indicator status
during pairing:
• Standby mode: flashes slowly.
• Pairing: flashes quickly.
• Paired: on solidly.

support.tclusa.com
support.tclcanada.com
or
The Adopted Trademarks HDMI, HDMI
High-Definition Multimedia Interface, and
the HDMI Logo are trademarks or
registered trademarks of HDMI Licensing
Administrator, Inc. in the United States and
other countries.
Dolby, Dolby Atmos, and the double-D symbol
are registered trademarks of Dolby Laboratories
Licensing Corporation. Manufactured under
license from Dolby Laboratories. Confidential
unpublished works. Copyright © 2012-2020
DolbyLaboratories. All rights reserved.
The Bluetooth®word mark and logos are
registered trademarks owned by Bluetooth
SIG, Inc.and anyuse of such marks by TTE
Corporation is under license. Other
trademarks and trade names are those of
their respective owners.
TS9030_NA_FR_QSG_V 2.10


Guide de démarrage rapide
ALTO 9+
Barre de son RAY·DANZ 3.1 Dolby Atmos avec caisson
de basses sans fil
Table of contents
Languages: