TCO V7 User manual

Congratulations!
The display you have just purchased carries the TCO’03
Displays label. This means that your display is designed,
manufactured and tested according to some of the strictest
quality and environmental requirements in the world. This
makes for a high performance product, designed with the
user in focus that also minimizes the impact on our natural
environment.
Some of the features of the TCO’03 Display requirements:
Ergonomics
Good visual ergonomics and image quality in order to improve the working environment
for the user and to reduce sight and strain problems. Important parameters are luminance,
contrast, resolution, reflectance, colour rendition and image stability.
Energy
Energy-saving mode after a certain time – beneficial both for the user and the
environment
Electrical safety
Emissions
Electromagnetic fields
Noise emissions
Ecology
The product must be prepared for recycling and the manufacturer must have a certified
environmental management system such as EMAS or ISO 14 001
Restrictions on
ochlorinated and brominated flame retardants and polymers
oheavy metals such as cadmium, mercury and lead.
The requirements included in this label have been developed by TCO Development in co-
operation with scientists, experts, users as well as manufacturers all over the world. Since the
end of the 1980s TCO hasbeen involved in infl uencing the development of IT equipment in a
more user-friendly direction. Our labelling system started with displays in 1992 and is now
requested by users and IT-manufacturers all over the world.
For more information, please visit
www.tcodevelopment.com

LCD Monitor
USER MANUAL
Benutzerhandbuch
Manuel Utilisateur
Manual de usuario
Manuale utente
Manual do utilizador
⫼᠋᠟ݠ
Gebruiksaanwijzing
Brukerveiledning

ϘThe display unit is an electric device which may contain hazardous materials /
components and that it needs to be taken care of at end of life according to a procedure.¨
For detailed recycling procedure, please visit
www.videoseven.com/website/displays/en/support/garantie/index.php
3.The apparatus shall only be used between 3±tilted forward and 17±tilted backward as normal operation position.
If the tilt angle exceeds 17±, it shall be used for wall mounting or packaging only.