TDC USA 21637 User manual

Made in China
The owner’s manual contains important safety information as well as assembly, use and
maintenance instructions. Keep the packaging and bags away from children and dispose
of all packaging properly before use. Keep this manual for future reference.
4 Piece Sofa Set
Steel Frame with Powder Coating
Assembly Instructions

PLEASE DO NOT
RETURN THIS
PRODUCT
TO THE STORE
We will be happy to correct any problems that you may
have, or answer any of your questions regarding the
purchase of this product. Please contact us at our Toll
Free customer service number 1-800-599-8898 for any
assistance and replacement parts. Thank You.
Dist. by TDC USA, Inc. Faireld, NJ 07004
©2020 All Rights Reserved.
Made in China
Item 21637
www.tdcusainc.com

3
Warnings
· CHOKING HAZARD - Small parts. Not suitable for children under 36 months. The
product contains small parts, keep children away when assembling.
· ADULT ASSEMBLY REQUIRED.
Always remove protective material and poly bags and dispose before assembly.
WARNING!
• Keep all children and pets away from assembly area.
Children and pets should be supervised when they
are in the area of the product construction.
• Some parts may contain sharp edges. When
assembling and using this product, basic safety
precautions should always be.
• Please read all the instructions and warnings before
assembling. In order to make the whole product
adjust to the best, please install all the screws on
the product and tighten all the screws after adjusting
the product which can stand on the oor even. Not
intended for commercial use.
• Check all bolts for tightness before use.
• IMPORTANT - check and tighten bolts often to keep
them secure

4
Parts
Arm Rest
Seat Cushion
Screw Cover
Washer
Table Rim
Glass
Hex Key
Chair Back
Back Cushion
M6x35 Screw
Sofa Seat
Table Leg
M6x25 Screw
Chair Seat
Throw Pillow
M6x40 Screw
Sofa Back
Table Ring
M6x15 Screw
A(x6)
E(x4)
H(x36)
K(x36)
N(x1)
Q(x1)
AA (x3)
C(x2)
F(x4)
I(x4)
L(x1)
O(x4)
R(x4)
D(x2)
G(x2)
J(x24)
M(x1)
P(x1)
S(x4)

5
Step 1:
Set Sofa Seat (L) down with the straps facing up. Place the bottom of Sofa Back (M)
against the back end of Sofa Seat (L) to form an “L” shape. Insert two Screws M6x35 (I)
through Washer (K) and then through the screw holes of Sofa Seat (L) and into Sofa Back
(M). Do not tighten fully.
Sofa Seat Instructions
AA
KI
H
M
L

6
Step 2:
Turn the sofa seat/back just assembled upside down and place one Arm Rest (A) against it.
The legs of Arm Rest (A) should be pointing away from the bottom of Sofa Seat (L). Insert
two Screws M6x40 (J) through Washers (K) and then through the screw holes of Arm Rest
(A) and into Sofa Back (M). Insert two Screws M6x40 (J) through Washers (K) and then
through the screw holes of Arm Rest (A) and into Sofa Seat (L). Do not tighten fully.
Sofa Seat Instructions
AA
H
JK
A

7
Step 3:
Place second Arm Rest (A) on opposite side of sofa seat/back and follow the same
instructions provided in Step 2. Once Arm Rest (A) is in place, tighten all loose screws
completely. Place Screw Covers (H) over all screw heads.
Step 4:
Place Seat Cushions (E) and
Back Cushions (F) in their
designated places and use the
Throw Pillows (G) as needed.
Sofa Seat Instructions
AA
J
K
H
A
F
G
E

8
Table Instructions
Step 1:
Remove Glass (Q) from Table Rim (N). Lay Table Rim (N) upside down. Using four Screws
M6x15 (S) and Washers (K), screw the Legs (O) to the Table Rim (N). Screw the Table Ring
(P) onto the Legs (O) using Screws M6x25 (R) and Washers (K). Once Table Ring (P) is in
place, tighten all loose screws completely. Place Screw Covers (H) over all screw heads to
hide their appearance.
Step 2:
Turn table right-side up and put Glass (Q) back into place inside Table Rim (N).
AA
KRHP
O
N
H
AA
S
K
Q

9
Seat Instructions
Step 1:
Set Chair Seat (D) down with the straps facing up. Place the bottom of Chair Back (C) against
the back end of Chair Seat (D) to form an “L” shape. Insert one Screws M6x35 (I) through
Washers (K) and then through the screw hole of Chair Seat (D) and into Chair Back (C). Do
not tighten fully.
C
AA
K
I
H
D

10
Step 2:
Turn the chair seat/back just assembled upside down and place one Arm Rest (A) against it.
The legs of Arm Rest (A) should be pointing away from the bottom of Chair Seat (D). Insert
two Screws M6x40 (J) through Washers (K) and then through the screw holes of Arm Rest (A)
and into Chair Back (C). Insert two Screws M6x40 (J) through Washers (K) and then through
the screw holes of Arm Rest (A) and into Chair Seat (D). Do not tighten fully.
Instructions
AA
HJK
A

11
Step 3:
Place secondArm Rest (A) on opposite side of chair seat/back and follow the same instructions
provided in Step 2. Once Arm Rest (A) is in place, tighten all loose screws completely. Place
Screw Covers (H) over all screw heads to hide their appearance.
Step 4:
Place Seat Cushions (E) and Back
Cushions (F) in their designated places.
Instructions
AA
KJH
A
F
E

Dist. by TDC USA, Inc. Faireld, NJ 07004
©2020 All Rights Reserved. Made in China.
Item #21637
Questions and Comments
1-800-599-8898 (9 am - 5 pm EST)
www.tdcusainc.com
4 Piece Sofa Set
Steel Frame with Powder Coating