Teac CD-W28PU User manual

Portable USB CD-RW Drive
CD-W28PU
User's manual
®
To ensure the smooth handling of your warranty please write the serial number of
your drive into the box.In the case of warranty you are expected to send it together
with a copy of your invoice to your nearest TEAC sales representative.

•Copyright ©2001,TEACCorporationLtd.Allrightsreserved.
First edition: October 2001
•Company and product names provided herein are trade-
marks of their respective companies.
•Windows 98 Second Edition, Windows Me, and Windows
2000 are registered trademarks of Microsoft Corporation in
the U.S.
•Just Link is a trademark of Ricoh Co., Ltd.
•Changes in specifications and features may be made with-
out notice or obligation.

51
ENGLISH
Contents
CONTENTS
TO THE USER ................................................................................ 53
PRECAUTIONS .............................................................................. 53
SOFTWARE LICENCE AGREEMENT AND LIMITED
WARRANTY ................................................................................... 54
1. BEFORE USING ......................................................................... 56
1.1 Computers to connect.......................................................... 56
1.2 Conforming OSes (as of October in 2001) .......................... 57
1.3 Checking the USB controller................................................ 57
1.4 Writing media and writing speed.......................................... 59
2. PRODUCT OUTLINE .................................................................. 61
2.1 Procedure before using the CD-W28PU.............................. 62
2.2 Precautions when unpacking the package .......................... 62
2.3 Package List......................................................................... 63
3.PRECAUTIONS FOR SETTING AND HANDLING ..................... 64
4. NAMES AND FUNCTIONS......................................................... 66
5.SETTING UP THE CD-W28PU................................................... 69
5.1 Cable connection ................................................................. 69
5.2 Driver installation under Windows 98SE .............................. 70
5.3 Driver un-installation in Windows 98SE ............................... 73
5.4 Driver installation under Windows Me.................................. 75
5.5 Driver installation Windows 2000 ......................................... 76
6.SYSTEM RECOVERY PROCEDURE......................................... 77
6.1 System recovery ofWindows 98SE ..................................... 77
6.2 System recovery of Windows ME ........................................ 79
6.3 System recovery of Windows 2000 and Windows XP.......... 82

52
ENGLISH
7.OPERATION................................................................................ 83
7.1 Precautions in handling the media....................................... 83
7.2 Connection........................................................................... 85
7.3 Disconnection ...................................................................... 85
7.4 Setting the media ................................................................. 87
7.5 Ejecting the media ............................................................... 87
7.6 Playing back the audio CD................................................... 88
7.7 Suspend/resume.................................................................. 90
8.DAILY MAINTENANCE ............................................................... 90
Cleaning the drive ...................................................................... 90
9.SUPPORT AND SERVICE.......................................................... 91
9.1 Warranty period.................................................................... 91
9.2 Requests for repair............................................................... 91
9.3 Technical Service Depots (Europe)...................................... 92
10.SPECIFICATION ....................................................................... 93
10.1 General specification ......................................................... 93
10.2 Functional specification...................................................... 94
WARRANTY ................................................................................... 95
Contents

53
ENGLISH
To the User
TOTHE USER
This equipment has been tested and found to comply with the limits for
a Class B digital device, pursuant toVCCI Rules.Although this device
is designed to be used in a home environment, it may cause interfer-
ence if used near a radio orTV receiver. Be sure to handle the device
properly in accordance with this instruction manual.
PRECAUTIONS
•While reasonable efforts have been made in the preparation of this
product and this document to assure accuracy, contact TEAC Cor-
poration if there is any doubt or error in this document. Note how-
ever that TEAC Corporation may not assume responsibility for the
support or results of the above.
•TEAC Corporation assumes no responsibility for data loss caused
by the operation that is not in accordance to this document, or data
loss caused by natural disaster, fire, power outage, or spontaneous
defect of this product.
•Theproductandthe materialinthisdocument are subject tochange
toward improvement without notice.
•No part of this document may be reproduced without the prior writ-
ten consent of TEAC Corporation.
•The contents in this document are written based on information as
of October 2001.

54
ENGLISH
Software Licence Agreement and LimitesWarranty
SOFTWARE LICENCE AGREEMENT AND
LIMITED WARRANTY
DEVICE DRIVER FORTEAC CD-R/RW UNIT LICENSE
AGREEMENT AND LIMITEDWARRANTY
IMPORTANT:
PLEASECAREFULLYREADTHE LICENSE AGREEMENT
HEREIN BEFORE USING THE ENCLOSED DEVICE
DRIVERSOFTWARE (INCLUDINGPROGRAMSAND ALL
RELATED MATERIALS, ”SOFTWARE”) FOR THE TEAC
CD-R/RWUNIT(”EQUIPMENT”).THERIGHTTOUSETHE
SOFTWARE IS GRANTED ONLY ON THE CONDITION
THATYOU AGREETOTHE LICENSE AGREEMENT.YOUR
USEOFTHE SOFTWARE SHALL BE DEEMEDTHATYOU
AGREETOTHE LICENSE AGREEMENT.
ThisLicenseAgreementwithlimitedwarranty is a legal agreement you
(either an individual or a single entity) andTEAC Corporation (“TEAC”)
for the SOFTWARE, which include computer software and electronic
documentation.
1. GRANT OF LICENSE.
TEACgrantstoyoutheright tousetheSOFTWAREonly fortheEQUIP-
MENT you have (“YOUR EQUIPMENT”).
2. COPYRIGHT.
Alltitleand copyrightsinandtothe SOFTWAREand anycopiesthereof
are owned by TEAC or a supplier to TEAC.The SOFTWARE is pro-
tected byJapanese copyright laws, international treaty provisions, and
all other applicable national laws.
3. RESTRICTIONS.
You may not distribute copies of the SOFTWARE to third parties.
You may not reverse engineer, decompile, or disassemble the SOFT-
WARE, except and only to the extent that applicable law notwithstand-
ing this limitation expressly permits such activity.
You may not rent or lease the SOFTWARE.
You may not reproduce the SOFTWARE except for archival purpose.
You must prominently mark the same copyright notice on your archival

55
ENGLISH
Software Licence Agreement and LimitesWarranty
file that TEAC marks on the media of the SOFTWARE.
Provided, however, that you may permanently transfer all of your rights
under this Agreement only in conjunction with a permanent transfer of
YOUR EQUIPMENT, SOFTWARE and any copies thereof.
4.TERMINATION.
Your rights under this Agreement terminate upon the disposal of all
copies of the SOFTWARE, or without prejudice to any other rights,
TEACmayterminatethis Agreement if youfailto comply with the terms
and conditions of this Agreement. In such event, you must destroy all
copies of the SOFTWARE.
5. LIMITEDWARRANTY.
TEAC warrants that the SOFTWARE will be usable for the purpose
expressed on TEAC’s document when properly installed on a compu-
ter under allowable circumstances, including OS, CPU, I/F, cable, etc.
Your remedy andTEAC’s obligationunder this limited warrantyshall be
limited to replacement or rectification of the defective SOFTWARE.
TEAC does not warrant that the operation of the SOFTWARE will be
uninterrupted or error free. Any and all implied warranties or condi-
tions with respect to the SOFTWARE, INCLUDING BUT NOT LIM-
ITED TO IMPLIED WARRANTIES OR CONDITIONS OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE,
HEREBY ARE EXCLUDED.
6. NO LIABILITY FOR CONSEQUENTIAL DAMAGES.
TOTHE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN
NO EVENT SHALLTEAC BE LIABLE FOR ANY SPECIAL INCIDEN-
TAL, INDIRECT, OR CONSEQUENTIAL DAMAGES WHATSOEVER
(INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF
BUSINESS PROFITS, BUSINESS INTERRUPTION, LOSS OF BUSI-
NESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARIS-
ING OUT OFTHE USE OF OR INABILITYTO USETHE SOFTWARE,
EVENIFTEACHAS BEEN ADVISEDOFTHE POSSIBILITY OFSUCH
DAMAGES. IN ANY EVENT,TEAC’S LIABILITYTOYOU SHALL NOT
EXCEED YOUR PURCHASE PRICE FOR YOUR EQUIPMENT. BE-
CAUSE SOME STATES AND JURISDICTIONS DO NOT ALLOWTHE
EXCLUSION OR LIMITATION OF LIABILITY FOR CONSEQUENTIAL
OR INCIDENTAL DAMAGES, THE ABOVE LIMITATION MAY NOT
APPLYTOYOU.
7. MISCELLANEOUS.
This Agreement is governed by the laws of Japan.

56
ENGLISH
1.Before Using
1. BEFORE USING
Thank you for purchasing TEAC USB Portable CD-R/RW unit CD-
W28PU.This is a CD-R/RW drive that is used by connecting it to the
USB terminal of a personal computer.The drive functions as a device
conforming to the USB1.1 when connected to the USB1.1 terminal
and as a device conforming to the USB2.0 when connected to the
USB2.0 terminal.
A floppy disk drive may be required for installing software when using
this drive.
This user’s manual describes how to set the CD-W28PU, how to con-
nect it to a personal computer, and how to operate it.Read the instruc-
tion manual of your computer as well.
Read the user’s manual provided with each software to understand
how to use it.
Read this instruction manual carefully before use for proper handling
and operations of the CD-W28PU.
1.1 Computers to connect
•A PC/AT compatible machine with a USB1.1 or USB2.0 interface
(two or more USB connectors are required when using the USB
floppy disk drive for system recovery)
•CPU of Intel Pentium II 266MHz or more
•Main memory of 64MB or more
•Free hard drive space of approx.800MB or more when writing to
the CD-R or CD-RW disc.
–The USB control conforms to one of the following:UHCI (Universal
Host Controller Interface), OHCI (Open Host Controller Interface)
or EHCI(Enhanced Host Controller Interface) of the USB 2.0.The
drive may not operate with some USB interfaces that conform to
theOHCI.

57
ENGLISH
1.Before Using
–Your PC must conform to a boot from the USB CD-ROM in order to
start from a bootable CD-ROM including a recovery CD using the
drive.
–It is recommended that you create a boot disk in advance taking
into consideration the re-installation (described in System Recov-
ery Procedure) of your OS.
–Refer to the TEAC homepage for the latest information on the op-
erational conformity.
1.2 Conforming OSes (as of October in 2001)
Any one of the following operating systems is required.
•Microsoft®Windows 98 Second Edition
•Microsoft®Windows Me
•Microsoft®Windows 2000 Professional
•Microsoft®Windows XP
•The drive does not conform toWindows 95,Windows 98 and MS-
DOS.
1.3 Checking the USB controller
To use the CD-W28PU in your computer, the USB controller incorpo-
rated in the computer must be operating normally.Execute the follow-
ing steps to check the operation state of the USB controller.
InWindows 98SE orWindows Me
1. Click Start, Settings, Control Panel.
2. Double-click System.
In Windows Me, System may not appear in the Control Panel. In
that case, left-click Display all the Control Panel options to display
it.

58
ENGLISH
InWindows 2000
1. Click Start, Settings, Control Panel.
2. Double-click System.
3. Click the Hardware tab.
4. Click the Device Manger (D)...button.
5. Confirm that USB (Universal Serial Bus) Controller exists in the
device list.
1.Before Using
3. Click the Device Manager tab.
Confirm that USB (Universal Serial Bus) Controller exists in the
device list. The name of the USB controller depends on the PC
used(the figurebelowrepresentsaUSB controllerprovidedbyIntel).