Teamco SNOWBLAST 9600A User manual

9600A
Published 04/08
OPERATOR’S MANUAL
SNOW BLOWER
This Operator's Manual is an integral part of the safe operation of this machine and must
be maintained with the unit at all times. READ, UNDERSTAND, and FOLLOW the Safety
and Operation Instructions contained in this manual before operating the equipment. C01-
Cover
$0.00
SNOWBLAST
Teamco Inc.
27050 S. Katie Rd.
Suite 400
Tea, SD 57064
605-498-0610
[email protected]

To the Owner/Operator/Dealer
All implements with moving parts are potentially hazardous. There is no substitute for a cautious, safe-minded
operator who recognizes the potential hazards and follows reasonable safety practices. The manufacturer has
designed this implement to be used with all its safety equipment properly attached to minimize the chance of
accidents.
BEFORE YOU START!! Read the safety messages on the implement and shown in your manual. Observe the
rules of safety and common sense!
WARRANTY INFORMATION:
Read and understand the complete Warranty Statement found in this Manual. Fill out the Warranty Registration
Form in full and return it to within 30 Days. Make certain the Serial Number of the Machine is recorded on the
Warranty Card and on the Warranty Form that you retain

TABLE OF CONTENTS
SAFETY SECTION .............................................................................................................. 1-1
General Safety Instructions and Practices ......................................................................................................... 1-2
Operator Safety Instructions and Practices .......................................................................................................1-3
Connecting or Disconnecting Implement Safety Instructions and Practices ......................................................1-5
Equipment Operation Safety Instructions and Practices ....................................................................................1-6
Transporting Safety Instructions and Practices .................................................................................................1-9
Maintenance and Service Safety Instructions and Practices ........................................................................... 1-11
Concluding Safety Instructions and Practices ..................................................................................................1-13
Decal Location .................................................................................................................................................1-14
Decal Description ............................................................................................................................................. 1-16
Federal Laws and Regulations ........................................................................................................................1-22
INTRODUCTION SECTION ................................................................................................. 2-1
ASSEMBLY SECTION ........................................................................................................ 3-1
HYDRAULIC CHUTE ROTATION CYLINDER ..................................................................................................3-2
OPERATION SECTION ....................................................................................................... 4-1
OPERATOR REQUIREMENTS .........................................................................................................................4-3
TRACTOR REQUIREMENTS ............................................................................................................................ 4-4
ROPS and Seat Belt ..........................................................................................................................................4-4
Tractor Safety Devices .......................................................................................................................................4-4
Tractor Horsepower ...........................................................................................................................................4-4
3-Point Hitch ......................................................................................................................................................4-5
Power Take Off (PTO) ....................................................................................................................................... 4-5
Tire Spacing .......................................................................................................................................................4-6
GETTING ON AND OFF THE TRACTOR .........................................................................................................4-6
Boarding the Tractor .......................................................................................................................................... 4-6
Dismounting the Tractor ..................................................................................................................................... 4-7
STARTING THE TRACTOR .............................................................................................................................. 4-7
CONNECTING THE SNOW BLOWER TO THE TRACTOR .............................................................................4-8
Connecting the Snow Blower to the Tractor ......................................................................................................4-8
DRIVELINE ATTACHMENT ..............................................................................................................................4-9
Connecting Snow Blower Hydraulic Lines to the Tractor .................................................................................4-10
PRE-OPERATION INSPECTION AND SERVICE ...........................................................................................4-10
Tractor Pre-Operation Inspection/Service ........................................................................................................ 4-11
Snow Blower Pre-Operation Inspection/Service .............................................................................................. 4-12
DRIVING THE TRACTOR AND SNOW BLOWER .......................................................................................... 4-16
Starting the Tractor .......................................................................................................................................... 4-18
Brake and Differential Lock Setting .................................................................................................................. 4-18
Driving the Tractor and Snow Blower ..............................................................................................................4-19
Crossing Ditches and Steep Inclines ...............................................................................................................4-20
OPERATING THE TRACTOR AND SNOW BLOWER ....................................................................................4-21
Foreign Debris Hazards ...................................................................................................................................4-21
Engaging the Power Take Off (PTO) ...............................................................................................................4-22
PTO RPM and Ground Speed .........................................................................................................................4-22
OPERATING THE SNOW BLOWER ............................................................................................................... 4-23
Shutting Down the Implement .......................................................................................................................... 4-25
DISCONNECTING THE SNOW BLOWER FROM THE TRACTOR ................................................................ 4-25

SNOW BLOWER STORAGE ...........................................................................................................................4-27
TRANSPORTING THE TRACTOR AND SNOW BLOWER .............................................................................4-27
Transporting on Public Roadways ................................................................................................................... 4-29
Transporting on Public Roadways ................................................................................................................... 4-29
Hauling the Tractor and Implement ..................................................................................................................4-32
TROUBLESHOOTING GUIDE ........................................................................................................................4-33
MAINTENANCE SECTION .................................................................................................. 5-1
NUTS AND BOLTS ............................................................................................................................................5-2
DRIVE CHAIN .................................................................................................................................................... 5-2
SHEAR BOLTS ..................................................................................................................................................5-2
LUBRICATION ...................................................................................................................................................5-3
PTO Shaft ..........................................................................................................................................................5-3
Spout Bracket ....................................................................................................................................................5-3
Fans ...................................................................................................................................................................5-4
Oil Reservoir ...................................................................................................................................................... 5-4
GREASE SCHEDULE ....................................................................................................................................... 5-5
STORAGE .........................................................................................................................................................5-5
PROPER TORQUE FOR FASTENERS ............................................................................................................5-6

DEALER’S PREDELIVERY SERVICE GUIDE
for the 9600A
DETAILS OF ITEMS LISTED BELOW ARE COVERED IN THIS OPERATOR’S MANUAL
______ Set up machine as outlined in the shipping instructions attached to these instructions.
______ Check that all safety decals are in good condition, replace if necessary.
______ Check that gearboxes have been filled with oil.
______ Check that all grease fittings have been lubricated.
DEALER’S DELIVERY GUIDE
______ Mounting and removal from tractor
______ Operation
______ Adjustments
______ Lubrication
______ Maintenance
______ Operator’s safety precautions
______ User’s responsibility and warranty
______ Operator’s manual delivered to owner
______ Operator’s instructed on contents of owner’s manual

Safety Section 1-1
SAFETY SECTION

SAFETY
9600A 04/08Safety Section 1-2
SAFETY
General Safety Instructions and Practices
A careful operator is the best operator. Safety is of primary importance to the manufacturer and should be to
the owner/operator. Most accidents can be avoided by being aware of your equipment, your surroundings, and
observing certain precautions. The first section of this manual includes a list of Safety Messages that, if
followed, will help protect the operator and bystanders from injury or death. Read and understand these Safety
Messages before assembling, operating or servicing this Implement. This equipment should only be operated
by those persons who have read the Manual, who are responsible and trained, and who know how to do so
responsibly.
The Safety Alert Symbol combined with a Signal Word, as seen below, is used throughout this
manual and on decals which are attached to the equipment. The Safety Alert Symbol means:
“ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!” The Symbol and Signal Word
are intended to warn the owner/operator of impending hazards and the degree of possible injury
faced when operating this equipment.
Indicates an imminently hazardous situation that, if not avoided, WILL result in DEATH OR
VERY SERIOUS INJURY.
Indicates an imminently hazardous situation that, if not avoided, COULD result in DEATH
OR SERIOUS INJURY.
Indicates an imminently hazardous situation that, if not avoided, MAY result in MINOR
INJURY.
Identifies special instructions or procedures that, if not strictly observed, could result in
damage to, or destruction of the machine, attachments or the environment.
NOTE: Identifies points of particular interest for more efficient and convenient operation or repair.(SG-1)
Practice all usual and customary safe working precautions and above all---remember safety is
up to YOU. Only YOU can prevent serious injury or death from unsafe practices.
READ, UNDERSTAND, and FOLLOW the following Safety Messages. Serious injury or
death may occur unless care is taken to follow the warnings and instructions stated in the
Safety Messages. Always use good common sense to avoid hazards. (SG-2)
Si no lee ingles, pida ayuda a alguien que si lo lea para que le traduzca las
medidas de seguridad. (SG-3)
2008 Teamco Inc.

SAFETY
9600A 04/08Safety Section 1-3
SAFETY
Operator Safety Instructions and Practices
Engine Exhaust, some of its constituents, and certain vehicle components contain or emit
chemicals known to the state of California to cause cancer and birth defects or other
reproductive harm. (SG-30)
Battery posts, terminals and related accessories contain lead and lead compounds,
chemicals known to the state of California to cause cancer, birth defects or other
reproductive harm. (SG-31)
The rotating parts of this machine continue to rotate even after the PTO has been turned off.
The operator should remain in his seat for 60 seconds after the brake has been set, the
PTO disengaged, the tractor turned off, and all evidence of rotation has ceased. (S3PT-10)
“Wait a minute...Save a life!”
Never crawl under a raised Implement supported solely by the Tractor 3-Point hitch.
Release of the control lever or mechanical failure will result in the Implement falling and
possible injury or death. Always securely block up the Implement before crawling
underneath to perform repairs and service. (S3PT-19)
Never operate the Tractor or Implementuntil you have readand
completely understand this Manual, the Tractor Operator’s Manual, and
each of the Safety Messages found in the Manual or on the Tractor and
Implement. Learn how to stop the tractor engine suddenly in an
emergency. Never allow inexperienced or untrained personnel to
operate the Tractor and Implement without supervision. Make sure the
operator has fully read and understood the manuals prior to operation.
(SG-4)
The operator and all support personnel should wear hard hats, safety
shoes, safety glasses, and proper hearing protection at all times for
protection from injury including injury from items that may be thrown by
the equipment. (SG-16)
PROLONGED EXPOSURE TO LOUD NOISE MAY CAUSE
PERMANENT HEARING LOSS! Tractors with or without an Implement
attached can often be noisy enough to cause permanent hearing loss.
We recommend that you always wear hearing protection if the noise in
the Operator’s position exceeds 80db. Noise over 85db over an
extended period of time will cause severe hearing loss. Noise over 90db
adjacent to the Operator over an extended period of time will cause
permanent or total hearing loss. NOTE: Hearing loss from loud noise
[from tractors, chain saws, radios, and other such sources close to the
ear] is cumulative over a lifetime without hope of natural recovery. (SG-I7)
2008 Teamco Inc.

SAFETY
9600A 04/08Safety Section 1-4
SAFETY
Do not approach the front of the snow blower while the fan is rotating. Contact with the
rotating fan can result in serious injury or even death. Stay away until all motion has
stopped and the snow blower is securely blocked up before removing material, performing
service, and making repairs. (SSB-05a)
Always readcarefully andcomply fully with the manufacturer’s
instructions when handling oil, solvents, cleansers, and any other
chemical agent. (SG-22)
KEEP AWAY FROM ROTATING ELEMENTS to prevent entanglement
and possible serious injury or death. (SG-24)
Never allow children to play on or around Tractor or Implement. Children can slip or fall off
the Equipment and be injured or killed. Children can cause the Implement to shift or fall
crushing themselves or others. (SG-25)
NEVER use drugs or alcohol immediately before or while operating the
Tractor and Implement. Drugs and alcohol will affect an operator’s
alertness and coordination and therefore affect the operator’s ability to
operate the equipment safely. Before operating the Tractor or
Implement, an operator on prescription or over-the-counter medication
must consult a medical professional regarding any side effects of the
medication that would hinder their ability to operate the Equipment safely.
NEVER knowingly allow anyone to operate this equipment when their
alertness or coordination is impaired. Serious injury or death to the
operator or others could result if the operator is under the influence of
drugs or alcohol. (SG-27)
Prolongedoperation may cause operator boredom and fatigue affecting safe operation.
Take scheduled work breaks to help prevent these potentially impaired operating
conditions. Never operate the Implement and Tractor in a fatigued or bored mental state
which impairs proper and safe operation. (SG-32)
DO NOT operate this Implement on a Tractor that is not properly maintained. Should a
mechanical or Tractor control failure occur while operating, immediately shut down the
Tractor and perform repairs before resuming operation. Serious injury and possible death
could occur from not maintaining this Implement and Tractor in good operating condition.
(SG-36)
2008 Teamco Inc.

SAFETY
9600A 04/08Safety Section 1-5
SAFETY
Do not put hands or feet near the rotating fan. Fan contact can result in
serious injury or even death. Stay away until all motion has stopped and
the snow blower is securely blocked up before removing material,
performing service, and making repairs. (SSB-6)
Connecting or Disconnecting Implement Safety Instructions and
Practices
Only use Tractors equipped with a ROPS cab and seatbelt with this equipment. Always
wear your seat belts. Serious injury or even death could result from loss of control of the
tractor or falling off. (SSB-18)
Do not operate the implement while wearing loose fitting clothing. Entanglement of the
clothing with the rotating elements can result in serious injury or even death. Stay clear of
all rotating elements at all times. (SSP-3)
DO NOT use a PTO adapter to attach a non-matching Implement driveline to a Tractor
PTO. Use of an adapter can double the operating speed of the Implement resulting in
excessive vibration, thrown objects, and blade and implement failure. Adapter use will also
change the working length of the driveline exposing unshielded driveline areas. Serious
bodily injury and/or equipment failure can result from using a PTO adapter. Consult an
authorized dealer for assistance if the Implement driveline does not match the Tractor PTO.
(S3PT-14)
Always shut the Tractor completely down, place the transmission in park, and set the
parking brake before you or anyone else attempts to connect or disconnect the Implement
and Tractor hitches. (S3PT-15)
When attaching the Implement input driveline to the Tractor PTO, it is important that the
connecting yoke spring activated locking collar slides freely and the locking balls are seated
securely in the groove on the Tractor PTO shaft. A driveline not attached correctly to the
Tractor PTO shaft could come loose and result in personal injury and damage to the
Implement. (S3PT-17)
Before operating the Implement, check to make sure the Implement input driveline will not
bottom out or become disengaged. Bottoming out occurs when the inner shaft penetrates
the outer housing until the assembly becomes solid-it can shorten no more. Bottoming out can cause serious
damage to the Tractor PTO by pushing the PTO into the Tractor and through the support bearings or
downward onto the PTO shaft, breaking it off. A broken driveline can cause personal injury. (S3PT-18)
2008 Teamco Inc.

SAFETY
9600A 04/08Safety Section 1-6
SAFETY
Equipment Operation Safety Instructions and Practices
This Implement is wider than the Tractor. Be careful when operating or transporting this
equipment to prevent the Implement from running into or striking sign posts, guard rails,
concrete abutments or other solid objects. Such an impact could cause the Implement and
Tractor to pivot violently resulting in loss of steering control, serious injury, or even death.
Never allow the Implement to contact obstacles. (S3PT-12)
Operate this Equipment only with a Tractor equipped with an approved roll-
over-protective system (ROPS). Always wear seat belts. Serious injury or
even death could result from falling off the tractor--particularly during a turnover
when the operator could be pinned under the ROPS. (SG-7)
BEFORE leaving the tractor seat, always engage the brake and/or set
the tractor transmission in parking gear, disengage the PTO, stop the
engine, remove the key, and wait for all moving parts to stop. Place the
tractor shift lever into a low range or parking gear to prevent the tractor
from rolling. Never dismount a Tractor that is moving or while the engine
is running. Operate the Tractor controls from the tractor seat only. (SG-9)
Never allow children or other persons to ride on the Tractor or Implement.
Falling off can result in serious injury or death. (SG-10)
Never allow children to operate, ride on, or come close to the Tractor or
Implement. Usually, 16-17 year-old children who are mature and
responsible can operate the implement with adult supervision, if they
have read and understand the Operator’s Manuals, been trained in
proper operation of the tractor and Implement, and are physically large
enough to reach and operate the controls easily. (SG-11)
Do not mount the Tractor while the tractor is moving. Mount the Tractor
only when the Tractor and all moving parts are completely stopped. (SG-12)
2008 Teamco Inc.

SAFETY
9600A 04/08Safety Section 1-7
SAFETY
Start tractor only when properly seated in the Tractor seat. Starting a
tractor in gear can result in injury or death. Read the Tractor operators
manual for proper starting instructions. (SG-13)
Do not operate this Equipment with hydraulic oil or fuel leaking. Oil and
fuel are explosive and their presence could present a hazard. Do not
check for leaks with your hand! High-pressure oil streams from breaks in
the line could penetrate the skin and cause tissue damage including
gangrene. To check for a hose leak, SHUT the unit ENGINE OFF and
remove all hydraulic pressure. Wear oil impenetrable gloves, safety
glasses and use Cardboard to check for evidence of oil leaks. If you
suspect a leak, REMOVE the HOSE and have it tested at a Dealer. If oil
does penetrate the skin, have the injury treated immediately by a
physician knowledgeable and skilled in this procedure. (SG-15)
Never run the Tractor engine in a closed building or without adequate ventilation. The
exhaust fumes can be hazardous to your health. (SG-23)
Do not exceed the rated PTO speed for the Implement. Excessive PTO speeds can cause
Implement driveline or blade failures resulting in serious injury or death. (SG-26)
Operate the Tractor and/or Implement controls only while properly seated in the Tractor seat
with the seat belt securely fastened around you. Inadvertent movement of the Tractor or
Implement may cause serious injury or death. (SG-29)
In case ofmechanical difficulty during operation, place the transmission in the park
position, set the parking brake, shut down all power, including the PTO and the engine and
remove the key. Wait until all rotating motion has stopped before dismounting. (SG-39)
Never leave the Implement and Power Unit unattended while the Implement is in the raised
position. Accidental operation of a lifting lever or a hydraulic failure may cause the
implement to suddenly fall causing serious injury or possible death to anyone who might
inadvertently be under the Implement. Lower the implement carefully to the ground. Do not
put hands or feet under lifted components. (SPU-3)
2008 Teamco Inc.

SAFETY
9600A 04/08Safety Section 1-8
SAFETY
Only operate the snow blower in conditions were you have clear visibility in daylight or with
adequate artificial lighting. Never snow blow in darkness or in conditions where you cannot
clearly see at least 100 yards in front and to the sides of the Tractor and Snow Blower. Make sure that you can
clearly see and identify passersby, steep slopes, ditches, drop-offs, overhead obstructions, power lines, debris
and foreign objects. If you are unable to clearly see these types of items, discontinue snow blowing. (SSB-1)
Many varied objects, such as wire, cable, rope, or chains can become entangled in the
operating parts of the Snow Blower. These items could then swing outside the housing at
high speeds. Such a situation is extremely hazardous and could result in serious injury or
even death. Inspect the work area for such objects before snow blowing. Remove any like
object from the site. Never allow the fans to contact such items. (SSB-3)
Blow snow at the speed that you can safely operate and control the Tractor and Snow
Blower. Safe speed depends on terrain and snow conditions. Normal ground speed range
is from 0 to 5 mph. Use slow speeds when operating on or near steep slopes, ditches, drop-
offs, overhead obstructions, power lines, or when debris and foreign objects are to be
avoided. (SSB-4)
Snow Blowers are capable under adverse conditions of throwing
objects for great distances (200 feet or more). Do not allow the
snow stream to fall on passersby. Ice, debris and heavy snow
thrown from the snow blower can cause serious injury or death.
(SSB-7)
STOP SNOW BLOWING IF PASSERSBY ARE WITHIN 200 FEET.
When blowing snow with two machines in the same area be sure that windows are closed.
(SSB-10)
There are obvious and hidden potential hazards in the operation of this Snow Blower.
REMEMBER! This machine is often operated in deep snow where vision is reduced. The
fans of this Snow Blower can throw objects for great distances Serious injury or even
death may occur unless care is taken to insure the safety of the operator, bystanders, or
passersby in the area. Do not operate this machine with anyone in the immediate area.
Stop Snow Blowing if anyone is within 200 feet of Snow Blower. (SSB-11)
Extreme care should be taken when operating near loose objects such
as gravel, rocks, wire, and other debris. Inspect the area before
snowblowing. Foreign objects should be removed from the site to prevent machine
damage and/or bodily injury or even death. Any objects that cannot be removed must
be clearly marked and carefully avoided by the operator. Stop snowblowing immediately if
fans strike a foreign object. Repair all damage and make certain fans are balanced
before resuming mowing. (SGM-5)
2008 Teamco Inc.

SAFETY
9600A 04/08Safety Section 1-9
SAFETY
Do not operate Snow Blower if excessive vibration exists. Shut down PTO and the Tractor
engine. Inspect the Snow Blower to determine the source of the vibration. If fans are
damaged replace them immediately. Do not operate the Snow Blower until the fans
have been replaced and the Blower operates smoothly. Operating the Snow Blower
with excessive vibration can result in component failure and broken objects to be thrown
outward at very high velocities. To reduce the possibility of property damage, serious injury,
or even death, never allow the Snow Blower to be operated with fan paddles missing. (SSB-12)
The rotating parts of this machine have been designed and tested for rugged use.
However, the fans and rotating members could fail upon impact with heavy, solid objects
such as metal guard rails and concrete structures. Such impact could cause the broken
objects to be thrown outward at very high velocities. To reduce the possibility of property
damage, serious injury, or even death, never allow the rotating fans to contact such
obstacles. (SSB-13)
Always keep a careful lookout and use extreme care when working around utility lines.
Heavy snow or ice storms can cause utility lines to sage or drop to the ground. Never allow
the Snow Bower within 10 feet of any Utility power or gas line. When working close to Utility
lines consult your electric or gas company for a safe code of operation. (SSB-15)
Before dismounting to clear a clogged machine, place the transmission in the park position,
set the parking brake, shut down all power, including the PTO and the engine and remove
the key. Wait until all rotating motion has stop before dismounting. (SSB-16)
Snow can cover and hide solid objects such as guard rails, curbs, concrete structures, large
rocks, utility boxes, fir hydrants, etc. DO NOT allow the rotating parts of the Snow Blower to
contact such items. Inspect the area before operating the Snow Blower. Mark all solid items
clearly with a pole or flag. To reduce the possibility of property damage, serious injury, or
even death, never allow the rotating fans to contact such obstacles. (SSB-20)
The Snow Blower can block the operators vision directly in front of the Snow Blower.
Inspect the area before operating the Snow Blower and make sure that there are no
obstacles, passersby, or coworkers in the path of the Snow Blower. (SSB-22)
Transporting Safety Instructions and Practices
Be particularly careful when transporting the Implement with the Tractor. Turn curves or go
up hills only at a low speed and using a gradual steering angle. Rear mounted implements
move the center of gravity to the rear and remove weight from the front wheels. Make certain, by adding front
ballast, that at least 20% of the tractor’s weight is on the front wheels to prevent rearing up, loss of steering
control or Tractor tip-over. Slow down on rough or uneven surfaces to prevent loss of steering control which
could result in property damage or possible injury. Do not transport unless 3-Point lift lever is fully raised and
in the latched transport position. Dropping implement in transport can cause serious damage to the tractor
and/or Implement and possibly cause the operator or others to be injured or killed. (S3PT-2)
2008 Teamco Inc.

SAFETY
9600A 04/08Safety Section 1-10
SAFETY
Before transporting the Snow Blower, position the snow discharge shoot in the center
position to reduce the possibility of blocking the operators vision. (SSB-21)
Allow sufficient clearance for the Implement to swing outward while turning. Implements
carried behind the Tractor will swing outside the tire path when making turns. Contacting a
solid object while turning will cause equipment damage and possible injury. (S3PT-20)
Make certain that the “Slow Moving Vehicle” (SMV) sign is installed in
such a way as to be clearly visible and legible. When transporting the
Equipment use the Tractor flashing warning lights and follow all local
traffic regulations. (SG-6)
Transport only at speeds where you can maintain control of the
equipment. Serious accidents and injuries can result from operating this
equipment at high speeds. Understand the Tractor and Implement and how it handles
before transporting on streets and highways. Make sure the Tractor steering and brakes
are in good condition and operate properly.
Before transporting the Tractor and Implement, determine the proper transport speeds for
you and the equipment. Make sure you abide by the following rules:
• Test the tractor at a slow speed and increase the speed slowly. Apply the Brakes
smoothly to determine the stopping characteristics of the Tractor and Implement. As
you increase the speed of the Tractor the stopping distance increases. Determine the
maximum transport speed not to exceed 20 mph (30 kph) for transporting this
equipment.
• Test the equipment at a slow speed in turns. Increase the speed through the turn only
after you determine that the equipment can be operated at a higher speed. Use
extreme care and reduce your speed when turning sharply to prevent the tractor and
implement from turning over. Determine the maximum turning speed for you and this
equipment before operating on roads or uneven ground.
• Only transport the Tractor and Implement at the speeds which allow you to properly
control the equipment.
Be aware of the operating conditions. Do not operate the Tractor with weak or faulty brakes
or worn tires. When operating down a hill or on wet or rain slick roads, the braking distance
increases: use extreme care and reduce your speed. When operating in traffic always use
the Tractor’s flashing warning lights and reduce your speed. Be aware of traffic around you
and watch out for the other guy. (SG-19)
2008 Teamco Inc.

SAFETY
9600A 04/08Safety Section 1-11
SAFETY
Maintenance and Service Safety Instructions and Practices
Your driving vision may be reduced or impaired by the tractor, cab, or implement. Before
driving on public roadways identify any limited vision areas, and make adjustments to your
operating position, mirrors, and the implement transport position so that you can clearly
see the area where you will be traveling, and any traffic that may approach you. Failure to
maintain adequate vision of the public roadway and traffic can result in serious injury or
even death. (STI-10)
Make sure the PTO shield, integral driveline shields, and input shields
are is installed when using PTO-driven equipment. Always replace any
shield if it is damaged or missing. (S3PT-8)
Relieve hydraulic pressure prior to doing any maintenance or repair work
on the Implement. Place the Implement on the ground or securely
blocked up, disengage the PTO, and turn off the tractor engine. Push
and pull the Remote Cylinder lever in and out several times prior to
starting any maintenance or repair work. (S3PT-9)
Always maintain the safety signs in good readable condition. If the safety signs are
missing, damaged, or unreadable, obtain and install replacement safety signs immediately.
(SG-5)
Do notmodify or alter this Implement. Do notpermit anyone to modify or alter this
Implement, any of its components or any Implement function. (SG-8)
Never work under the Implement, the framework, or any lifted
component unless the Implement is securely supported or blocked up
to prevent sudden or inadvertent falling which could cause serious
injury or even death. (SG-14)
Never attempt to lubricate, adjust, or remove material from the Implement while it is in
motion or while tractor engine is running. (SG-20)
2008 Teamco Inc.

SAFETY
9600A 04/08Safety Section 1-12
SAFETY
Always disconnect the main PTO Driveline from the Tractor before performing service on
the Snow Blower. Never work on the Snow Blower with the Tractor PTO driveline connected
and running. The Fan, Auger or Drivelines could turn without warning and cause immediate
entanglement, injury or death. (SSB-8)
All Safety Shields, Guards and Safety devices including (but not limited to) - the Chain
Shield, Cross Shaft Shield, Gearbox Shields, and PTO integral shields must be used and
maintained in good working condition. All safety devices should be inspected carefully at
least daily for missing or broken components. Missing, broken, or worn items must be
replaced at once to reduce the possibility of injury or death from entanglement. (SSB-9)
DO NOT weld or repair rotating Blower components. Welds and other repairs may cause
severe vibration and/or component failure resulting in parts being thrown from the blower
causing serious bodily injury. See your Authorized Dealer for proper repairs. (SSB-14)
Ensure any remote starting system is inoperative before servicing or cleaning the machine.
Inadvertent engine start up could result in entanglement or runover causing serious injuries
or death. (SSB-17)
Use only OEM specified shear pins as replacement pins. The use of incorrect shear pins
can cause failures in the Snow Blower rotating components resulting in property damage
and/or serious bodily injuries. (SSB-19)
Periodically inspect all moving parts for wear and replace when
necessary with authorized service parts. Look for loose fasteners, worn
or broken parts, and leaky or loose fittings. Make sure all pins have
cotter pins and washers. Serious injury may occur from not maintaining
this machine in good working order. (SG-21)
Perform service, repairs and lubrication according to the maintenance section. Ensure the
unit is properly lubricated as specified in the lubrication schedule and all bolts and nuts are
properly torqued. Failure to properly service, repair and maintain this Implement in good
operating condition could cause component failure and possible serious injury or even
death. (SG-35)
2008 Teamco Inc.

SAFETY
9600A 04/08Safety Section 1-13
SAFETY
Concluding Safety Instructions and Practices
In addition to the design andconfiguration of this Implement, including Safety Signs and Safety Equipment,
hazard control and accident prevention are dependent upon the awareness, concern, prudence, and proper
training of personnel involved in the operation, transport, maintenance, and storage of the machine. Refer
also to Safety Messages and operation instruction in each of the appropriate sections of the Tractor and
Equipment Manuals. Pay close attention to the Safety Signs affixed to the Tractor and Equipment. (SG-18)
2008 Teamco Inc.

SAFETY
9600A 04/08Safety Section 1-14
SAFETY
Decal Location
NOTE: Safety decals on this product promote safe operation. .
2008 Teamco Inc.