Tecno SPARK 5 Pro User manual

User Manual

Mobile Phone
Model：KD7
Hereby, TECNO MOBILE LIMITED
declares that this Mobile Phone is in compliance
with the essential requirements and other
relevant provisions of Directive 2014/53/EU.

Know your phone
01
1. Front camera
2. Volume key
3. Power key

1. Power off mobile.
2. Refer to the following picture for
SIM / SD card installation.
SIM/SD card installation
02

Charging the phone
03
You can charge your device using a
charger or by connecting it to the
computer using a USB cable (comes
with the phone).
1. Please remind the front and back of
the plug.
2. Use only TECNO charger and cables.
Other chargers or cables may damage
the device. This will invalidate your
phone warranty.

04
This device may be restricted for use,
depending on the local network.
Restrictions in the 5GHz band:
According to 10(10) of Directive
2014/53/EU, the packaging shows that
this radio equipment will be subject to
some restrictions when placed on the
market in Belgium(BE),Bulgaria(BG),the
Czech Republic(CZ) ,Denmark
(DK),Germany(DE),Estonia(EE),Ireland
(IE),Greece(EL),Spain(ES),France
(FR),Croatia(HR),Italy(IT),Cyprus
(CY),Latvia(LV),Lithuania
(LT),Luxembourg(LU),Hungary
(HU),Malta(MT),Netherlands(NL),Austria
(AT),Poland(PL),Portugal(PT), Romania
(RO),Slovenia(SK),Finland(FI),Sweden
(SE),the United Kingdom(UK),Turkey
(TR),Norway(NO),Switzerland
(CH),Iceland(IS),and Leichtenstein(LI).
The WLAN function for this device is
restricted to indoor use due to its

operation in the 5.15 to 5.35 GHz
frequency range.
Operating Frequency Band (RF)：
E-GSM900: 880-915MHz (TX),
925-960MHz (RX)
DCS1800: 1710-1785MHz (TX),
1805-1880MHz (RX)
WCDMA BAND I:1920-1980MHz (TX),
2110-2170MHz (RX)
WCDMA BAND VIII: 880-915MHz (TX),
925-960MHz (RX)
LTE BAND 1:1920-1980MHz (TX),
2110-2170MHz (RX)
LTE BAND 3:1710-1785MHz (TX),
1805-1880MHz (RX)
LTE BAND 7:2500-2570MHz (TX),
2620-2690MHz (RX)
LTE BAND 8:880-915MHz (TX),
925-960MHz (RX)
LTE BAND 20:832-862MHz (TX),
791-821MHz (RX)
05

LTE BAND 38:2570-2620MHz (TX),
2570-2620MHz (RX)
LTE BAND 40:2300-2400MHz (TX),
2300-2400MHz (RX)
BT: 2402-2480MHz (TX/RX)
Wi-Fi (2.4G): 2412~2472MHz (TX/RX)
Wi-Fi (5G): Band 1: 5150-5250MHz
(TX/RX)
Band 2: 5250-5350MHz (TX/RX)
Band 3: 5470-5725MHz (TX/RX)
GPS:1.57542GHz
FM:87.5-108MHz
Modulation mode：
GMSK, 8PSK (GSM)
BPSK, QPSK ,16QAM(WCDMA)
QPSK, 16-QAM, 64-QAM (LTE)
GFSK, π/4-DQPSK, 8DPSK (BT)
GFSK (BLE)
DSSS (DBPSK, DQPSK, CCK) for IEEE
802.11b
OFDM(BPSK,QPSK,16QAM,64QAM) for
06

07
IEEE 802.11g/n HT-20/HT-40
IEEE 802.11a/n:OFDM (BPSK / QPSK /
16QAM / 64QAM) (WiFi)
BPSK (GPS)
FM
RF output power：
GSM900: 33dBm±2dB
DCS1800: 30dBm±2dB
WCDMA BAND I/VIII:
24dBm+1.7dB/-3.7dB
LTE BAND 1/3/7/8/20/38/40:
23dBm+2.7dB/-2.7dB
Bluetooth: 0-10dBm
WiFi: 14dBm+/-3dB

08
Specific Absorption Rate (SAR)
Certification
THIS DEVICE MEETS INTERNATIONAL
GUIDELINES FOR EXPOSURE TO RADIO WAVES
Body parts
Test value
Test distance
Limit
Head
0.471W/Kg 10g
0cm
2.0 W/Kg 10g
Body
0.586 W/Kg 10g
0.5cm
2.0 W/Kg 10g

CAUTION：
1. Use careful with the earphone
maybe excessive sound pressure from
earphones and headphones can
cause hearing loss.
2. Risk of explosion if battery is replaced
by an incorrect type, dispose of used
batteries according to the instructions.
3. The product shall only be connected
to a USB interface of version USB 2.0.
4. Adapter shall be installed near the
equipment and shall be easily
accessible.
5. EUT Temperature: -10℃～65℃
6. Adapter1:U100TKA
Input: AC100-240V 50/60Hz 400mA
Output: DC 5.0V 2.0A
Adapter2:XCU32
Input: AC100-240V 50/60Hz 500mA
Output: DC 5.0V 2.0A
7. The device complies with RF
specifications when the device used at
09

5 mm from your body, and the holder
must not be of metal composition.
8. To prevent possible hearing
damage, do not listen at high volume
levels for long periods.
9. Earphone and USB cable are
shielded.
10