Tektronix DS1000 Series User manual

[phone] | [email protected] | artisantg.com
-~
ARTISAN
®
~I
TECHNOLOGY
GROUP
Your definitive source
for
quality
pre-owned
equipment.
Artisan Technology
Group
Full-service,
independent
repair
center
with
experienced
engineers
and
technicians
on staff.
We
buy
your
excess,
underutilized,
and
idle
equipment
along
with
credit
for
buybacks
and
trade-ins
.
Custom
engineering
so
your
equipment
works
exactly as
you
specify.
•
Critical
and
expedited
services
•
Leasing
/
Rentals/
Demos
• In
stock/
Ready-to-ship
•
!TAR-certified
secure
asset
solutions
Expert
team
ITrust
guarantee
I
100%
satisfaction
All
tr
ademarks,
br
a
nd
names, a
nd
br
a
nd
s a
pp
earing here
in
are
th
e property of
th
e
ir
r
es
pecti
ve
ow
ner
s.
Find the Tektronix DS1001A at our website: Click HERE

User Manual
DS1000 Series
Television Demodulators
070-9858-01
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Copyright Tektronix, Inc. All rights reserved.
Tektronix products are covered by U.S. and foreign patents, issued and pending.
Information in this publication supercedes that in all previously published
material. Specifications and price change privileges reserved.
Printed in the U.S.A.
Tektronix, Inc., P.O. Box 1000, Wilsonville, OR 97070–1000
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

WARRANTY
Tektronix warrants that the products that it manufactures and sells will be free from
defects in materials and workmanship for a period of one (1) year from the date of
shipment. If a product proves defective during this warranty period, Tektronix, at its
option, either will repair the defective product without charge for parts and labor, or will
provide a replacement in exchange for the defective product.
In order to obtain service under this warranty, Customer must notify Tektronix of the
defect before the expiration of the warranty period and make suitable arrangements for
the performance of service. Customer shall be responsible for packaging and shipping
the defective product to the service center designated by Tektronix, with shipping
charges prepaid. Tektronix shall pay for the return of the product to Customer if the
shipment is to a location within the country in which the Tektronix service center is
located. Customer shall be responsible for paying all shipping charges, duties, taxes, and
any other charges for products returned to any other locations.
This warranty shall not apply to any defect, failure or damage caused by improper use or
improper or inadequate maintenance and care. Tektronix shall not be obligated to furnish
service under this warranty a) to repair damage resulting from attempts by personnel
other than Tektronix representatives to install, repair or service the product; b) to repair
damage resulting from improper use or connection to incompatible equipment; c) to
repair any damage or malfunction caused by the use of non-Tektronix supplies; or d) to
service a product that has been modified or integrated with other products when the
effect of such modification or integration increases the time or difficulty of servicing the
product.
THIS WARRANTY IS GIVEN BY TEKTRONIX IN LIEU OF ANY OTHER
WARRANTIES, EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS
DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX’ RESPONSIBILITY
TO REPAIR OR REPLACE DEFECTIVE PRODUCTS IS THE SOLE AND
EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF
THIS WARRANTY. TEKTRONIX AND ITS VENDORS WILL NOT BE LIABLE
FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL
DAMAGES IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR
HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH DAMAGES.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

DS1000 Series User Manual i
Table of Contents
General Safety Summary vii. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Preface ix. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contacting Tektronix x. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Getting Started
Product Description 1–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Physical Dimensions 1–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Options 1–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Standard Accessories 1–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Optional Accessories 1–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Installation 1–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AC Power Source 1–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Changing the Mains Voltage 1–4. . . . . . . . . . . . . . . . . . . . . . . .
Power On Procedure 1–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mechanical Installation 1–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Custom Installation 1–7. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rackmount Information 1–7. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Functional Check 1–8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Basics
Functional Overview 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Front Panel Features 2–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Rear Panel Connectors 2–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Operating Procedures 2–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Applying Power 2–4. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting Display Modes 2–5. . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting a Program 2–8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Adjusting the Current Program 2–9. . . . . . . . . . . . . . . . . . . . . .
Reference
Configuring Operation 3–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Quick Guide 3–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Program Configuration 3–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Serial Configuration 3–8. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents
ii DS1000 Series User Manual
Frequency Response Configuration 3–10. . . . . . . . . . . . . . . . . . . . . .
Contrast Adjustment 3–12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
User Defined Channel Table 3–13. . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendices
Appendix A: Performance Specifications A–1. . . . . . . . . . . . . . .
Appendix B: Remote Control B–1. . . . . . . . . . . . . . . . . . . . . . . . .
Serial Port Connection B–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Programming Model B–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Addresses B–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote Operation Flag B–4. . . . . . . . . . . . . . . . . . . . . . . . . . . .
Command Types B–5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Sending and Receiving Data B–5. . . . . . . . . . . . . . . . . . . . . . . . . . .
Send Address Phase B–5. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Send Data Phase B–6. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Receive Address Phase B–7. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Polling for Status Messages B–8. . . . . . . . . . . . . . . . . . . . . . . . .
Getting a Message B–9. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Command Syntax B–11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Data Types B–11. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Data Offset B–12. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Remote Command Descriptions B–13. . . . . . . . . . . . . . . . . . . . . . . .
AFC B–13. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AUD_OUT B–14. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
AUD_PREF B–15. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
BTSC B–16. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
CHANNEL B–17. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
DISC B–18. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FREQ B–19. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IDN B–20. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
LOG? (Query only) B–21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MSG B–21. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MSG_C B–22. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PATH B–23. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PRESET B–24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
PWD B–24. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
RECPRT B–25. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
REPORT? (Query only) B–26. . . . . . . . . . . . . . . . . . . . . . . . . . . .
SETT B–26. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
STRAP B–28. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents
DS1000 Series User Manual iii
TUNING B–29. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
ZCP B–30. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix C: Service C–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Packaging for Shipment C–1. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Replacing the Fuse C–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the Exterior C–2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Appendix D: Channel Tables D–1. . . . . . . . . . . . . . . . . . . . . . . . .
Appendix E: Factory Default Settings E–1. . . . . . . . . . . . . . . . . .
Glossary
Index
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents
iv DS1000 Series User Manual
List of Figures
Figure 1–1: Rear panel connectors 1–5. . . . . . . . . . . . . . . . . . . .
Figure 1–2: Typical system configuration 1–6. . . . . . . . . . . . . . .
Figure 2–1: DS1000 series front panel 2–1. . . . . . . . . . . . . . . . . .
Figure 2–2: Rear-panel connectors for NTSC and PAL
models 2–3. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Figure B–1: Pin assignments for the SERIAL connector B–2. .
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents
DS1000 Series User Manual v
List of Tables
Table 1–1: Power cord identification 1–2. . . . . . . . . . . . . . . . . .
Table 3–1: Configure menu hierarchy 3–1. . . . . . . . . . . . . . . . .
Table 3–2: Frequency response adjustment bands 3–11. . . . . . .
Table A–1: Video specifications A–2. . . . . . . . . . . . . . . . . . . . . . .
Table A–2: Audio specifications A–3. . . . . . . . . . . . . . . . . . . . . . .
Table A–3: Electrical specifications – power requirements A–4
Table A–4: Environmental characteristics A–4. . . . . . . . . . . . . .
Table A–5: Physical characteristics A–4. . . . . . . . . . . . . . . . . . . .
Table A–6: Certifications and compliances A–5. . . . . . . . . . . . .
Table A–7: Safety certification and compliance A–6. . . . . . . . .
Table A–8: Safety standards A–7. . . . . . . . . . . . . . . . . . . . . . . . .
Table B–1: Rear-panel SERIAL port connections B–2. . . . . . . .
Table B–2: Special byte codes B–3. . . . . . . . . . . . . . . . . . . . . . . .
Table B–3: Data types used in remote communication B–11. . . .
Table D–1: CATV HRC channel table D–2. . . . . . . . . . . . . . . . . .
Table D–2: CATV IRC channel table D–3. . . . . . . . . . . . . . . . . . .
Table D–3: CATV standard channel table D–5. . . . . . . . . . . . . . .
Table D–4: Standard channel table D–7. . . . . . . . . . . . . . . . . . . .
Table D–5: IRC channel table D–9. . . . . . . . . . . . . . . . . . . . . . . . .
Table D–6: HRC channel table D–10. . . . . . . . . . . . . . . . . . . . . . . .
Table D–7: Broadcast channel table D–12. . . . . . . . . . . . . . . . . . . .
Table D–8: UHF Europa channel table D–13. . . . . . . . . . . . . . . . .
Table D–9: UHF China channel table D–14. . . . . . . . . . . . . . . . . .
Table D–10: VHF Europa channel table D–15. . . . . . . . . . . . . . . .
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Table of Contents
vi DS1000 Series User Manual
Table D–11: VHF France channel table D–16. . . . . . . . . . . . . . . . .
Table D–12: VHF Italy channel table D–16. . . . . . . . . . . . . . . . . .
Table D–13: VHF Australia channel table D–16. . . . . . . . . . . . . .
Table D–14: VHF China channel table D–17. . . . . . . . . . . . . . . . .
Table D–15: VHF Ireland channel table D–17. . . . . . . . . . . . . . . .
Table D–16: VHF New Zealand channel table D–17. . . . . . . . . . .
Table D–17: VHF South Africa channel table D–18. . . . . . . . . . . .
Table D–18: VHF OIRT channel table D–18. . . . . . . . . . . . . . . . .
Table D–19: VHF CCIR channel table D–18. . . . . . . . . . . . . . . . .
Table E–1: Program default settings E–1. . . . . . . . . . . . . . . . . . .
Table E–2: System default settings E–2. . . . . . . . . . . . . . . . . . . .
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

DS1000 Series User Manual vii
General Safety Summary
Review the following safety precautions to avoid injury and prevent
damage to this product or any products connected to it. To avoid
potential hazards, use this product only as specified.
Only qualified personnel should perform service procedures.
While using this product, you may need to access other parts of the
system. Read the General Safety Summary in other system manuals for
warnings and cautions related to operating the system.
To Avoid Fire or Personal Injury
Use Proper Power Cord. Use only the power cord specified for this
product and certified for the country of use.
Connect and Disconnect Properly. Do not connect or disconnect probes
or test leads while they are connected to a voltage source.
Ground the Product. This product is grounded through the grounding
conductor of the power cord. To avoid electric shock, the grounding
conductor must be connected to earth ground. Before making
connections to the input or output terminals of the product, ensure that
the product is properly grounded.
Observe All Terminal Ratings. To avoid fire or shock hazard, observe all
ratings and markings on the product. Consult the product manual for
further ratings information before making connections to the product.
Do Not Operate Without Covers. Do not operate this product with covers
or panels removed.
Use Proper Fuse. Use only the fuse type and rating specified for this
product.
Avoid Exposed Circuitry. Do not touch exposed connections and
components when power is present.
Do Not Operate in Wet/Damp Conditions.
Do Not Operate in an Explosive Atmosphere.
Keep Product Surfaces Clean and Dry.
Provide Proper Ventilation. Refer to the manual’s installation instruc-
tions for details on installing the product so it has proper ventilation.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

General Safety Summary
viii DS1000 Series User Manual
Safety Terms and Symbols
Terms in This Manual. These terms may appear in this manual:
WARNING. Warning statements identify conditions or practices that
could result in injury or loss of life.
CAUTION. Caution statements identify conditions or practices that
could result in damage to this product or other property.
Terms on the Product. These terms may appear on the product:
DANGER indicates an injury hazard immediately accessible as you
read the marking.
WARNING indicates an injury hazard not immediately accessible as
you read the marking.
CAUTION indicates a hazard to property including the product.
Symbols on the Product. These symbols may appear on the product:
ProtectiveGround
(Earth)Terminal CAUTION Refer to Manual Double Insulated
WARNING
High Voltage
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

DS1000 Series User Manual ix
Preface
This is the user manual for the DS1000 Series Television Demodula-
tors. It contains information about the DS1000 Series of products
which includes: DS1001 (NTSC), DS1002 (PAL B/G), and DS1003
(PAL I).
Manual Overview
Topics covered in this manual are as follows:
Getting Started includes a product description as well as
installation and first-time power-on procedures.
Operating Basics contains a functional overview, describing the
front- and rear-panel controls and connectors and a tutorial,
guiding the user through basic instrument operation.
Reference contains details on setting up unit presets and descrip-
tions of each preset item and its function.
Appendix A provides instrument specifications, both electrical and
mechanical.
Appendix B describes remote control interfaces, techniques, and
the command set.
Appendix C describes changing fuses and cleaning the product.
Appendix D contains channel tables.
Appendix E details the factory default settings.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Preface
xDS1000 Series User Manual
Contacting Tektronix
Product
Support For application-oriented questions about a Tektronix measurement product, call toll free in North America:
1-800-TEK-WIDE (1-800-835-9433 ext. 2400)
6:00 a.m. – 5:00 p.m. Pacific time
Or contact us by e-mail:
[email protected]
For product support outside of North America, contact
your local Tektronix distributor or sales office.
Service
Support Contact your local Tektronix distributor or sales office. Or visit our web site for a listing of worldwide
service locations.
http://www.tek.com
For other
information In North America: 1-800-TEK-WIDE (1-800-835-9433)
An operator will direct your call.
To write us Tektronix, Inc.
P.O. Box 1000
Wilsonville, OR 97070-1000
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Getting Started
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

DS1000 Series User Manual 1–1
Getting Started
This section provides the information you need to use the television
demodulator for the first time. Refer to the following sections to
prepare the instrument for operation:
Product Description
Options
Electrical Installation
Mechanical Installation
Functional Check
Product Description
The television demodulator can demodulate standard television RF
signals to baseband video and audio. Different models cover the range
of 55.25 to 801.25 MHz for NTSC M/N and 45.25 to 860.25 MHz for
PAL B/G, and I. The high performance of the conversion guarantees a
measurement-quality signal after demodulation.
Television demodulator Television system
ÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁ
DS1001
ÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁ
NTSC
ÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁ
DS1002
ÁÁÁÁÁÁÁÁÁÁÁ
ÁÁÁÁÁÁÁÁÁÁÁ
PAL B/G
ÁÁÁÁÁÁÁÁÁÁ
Á
ÁÁÁÁÁÁÁÁ
Á
ÁÁÁÁÁÁÁÁÁÁ
DS1003
ÁÁÁÁÁÁÁÁÁÁÁ
Á
ÁÁÁÁÁÁÁÁÁ
Á
ÁÁÁÁÁÁÁÁÁÁÁ
PAL I
To find the nomenclature and serial number of your instrument, check
either of the following places:
Before you have mounted the television demodulator, look at the
identification tag on the bottom panel.
After you have installed and powered on the television demodula-
tor, push the Display button three times.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Getting Started
1–2 DS1000 Series User Manual
By applying an RF signal to the antenna input, the television
demodulator provides baseband video and audio outputs and IF output
signals.
You can set tuning conditions for stored programs, which are held in
non-volatile memory. Tune the signal by channel, frequency, or preset
program. Twenty presets can be stored and recalled with different
configurations.
Most instrument functions are controllable through the remote serial
interface. Connection is through the SERIAL connector (9 pin) on the
rear panel. The interface type, RS232C or RS485, is configured
through the Serial Config menu. With the RS485 protocol, you can set
unique addresses for multiple units and control them all remotely.
PhysicalDimensions
The dimensions of the television demodulator are length 1.8 inches
(46 mm), width 8.1 inches (206 mm), and depth 17.3 inches
(440 mm). In a 19 inch (483 mm) rack, it is a half rack wide by one
rack unit high.
Options
You can purchase the television demodulator with several options and
accessories. Table 1–1 lists the power cord options.
Table 1–1: Power cord identification
Plug configuration Normal usage Option number
NorthAmerica
125V/15APlug
NEMA5-15P
Standard
Europe
230 V A1
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com

Getting Started
DS1000 Series User Manual 1–3
Table 1–1: Power cord identification (cont.)
Plug configuration Option numberNormal usage
UnitedKingdom
230 V A2
Australia
230 V A3
StandardAccessories
Your television demodulator includes the standard accessories listed
below:
Standard North American Power Cord (161-0066-00)
Two, 250 V, 1.6 A (1.6AT) replacement fuses (159-0366-00)
User Manual (070-9858-XX), this manual
OptionalAccessories
You can order the following rackmounting kits from Tektronix:
TVGF11A adapter mounts a single instrument in a standard
19-inch rack.
TVGF13 adapter mounts two half-rack width instruments
side-by-side in a standard 19-inch rack. Use this adapter to mount
DS1000 and VM100 series instruments side by side.
TVGF14 adapter mounts two half-rack width instruments
vertically in a standard 19-inch rack. Use this adapter to mount
DS1000 and VM100 series instruments with a 1700 series monitor.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com