Telex SS-1002U User manual

Model SS-1002
Single-Channel Intercom Speaker Station
Models SS-2002
Two-Channel Intercom Speaker Station
Model SS-2002 RM
Two-Channel Rack Mount Intercom Speaker Station
Technical Manual
9350-7741-000 Rev F 11/2010

PROPRIETARY NOTICE
The product information and design disclosed herein were originated by
and are the property of Bosch Security Systems, Inc. Bosch reserves all
patent, proprietary design, manufacturing, reproduction, use and sales
rights thereto, and to any article disclosed therein, except to the extent
rights are expressly granted to others.
COPYRIGHT NOTICE
Copyright 2010 by Bosch Security Systems, Inc. All rights reserved.
Reproduction, in whole or in part, without prior written permission from
Bosch is prohibited.
WARRANTY AND SERVICE INFORMATION
For warranty and service information, refer to the appropriate web site
below:
RTSwww.rtsintercoms.com/warranty
RTSTWwww.rtstw.com/warranty
AudioComwww.telexaudiocom.com/warranty
RadioComwww.telexradiocom.com/warranty
Headsetswww.intercomheadsets.com/warranty
CUSTOMER SUPPORT
Technical questions should be directed to:
Customer Service Department
Bosch Security Systems, Inc.
12000 Portland Avenue South
Burnsville, MN 55337 USA
Telephone: [phone]
Fax: [phone]
[email protected]
Technical Questions EMEA
Bosch Security Systems Technical Support EMEA
http://www.rtsintercoms.com/contact_main.php
FCC Statement
This equipment uses, and can radiate radio frequency energy that may
cause interference to radio communications if not installed in
accordance with this manual. The equipment has been tested found to
comply with the limits of a Class A computing device pursuant to
Subpart J Part 15 of FCC Rules which are designed to provide
reasonable protection against such interference when operated in a
commercial environment. Operation of this equipment in a residential
area may cause interference which the user (at his own expense) will be
required to correct.
This product meets Electromagnetic Compatibility
Directive 89/336/EEC
This package should include the following:
QTY DESCRIPTION PART NO.
1 SS-1002, 1 channel front plate assembly
OR
9010-7741-000
1 SS-2002, 2 channel front plate assembly 9010-7741-001
1 User Manual 9350-7741-000
4 Screw, Flat Head, 6-32 x 5/16” 51847-122
One of the following, depending on what was ordered:
1 P-box, 1-channel 9010-7627-007
1 S-box, w/handle, 1-channel 9010-7627-008
1 P-box, 2-channel 9010-7627-009
1 S-box, w/handle, 2-channel 9010-7627-010
1 U-box 9010-7627-004
1 S-box, w/out handle, 1-channel 9010-7627-011
1 S-box, w/out handle, 2-channel 9010-7627-012
1 Warranty Card 38110-390
2 End Caps 9310-7620-001
1 Statement of Conformity 38109-675
SS-2002RM
1 SS-2002RM Final Assembly 9010-7742-000
4 Foot, bumper, black 56471-001
1 User Instructions 9350-7741-000
1 Statement of Conformity 38109-675
1 Warranty 38110-390
THE LIGHTNING
FLASH AND
ARROWHEAD
WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
“DANGEROUS
VOLTAGE” INSIDE
THE PRODUCT.
CAUTION: TO REDUCE
THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE
COVER. NO USER-
SERVICABLE PARTS
INSIDE. REFER
SERVICING TO
QUALIFIED SERVICE
PERSONNEL.
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING SIGN
ALERTING YOU OF
IMPORTANT
INSTRUCTIONS
ACCOMPANYING
THE PRODUCT
SEE MARKING ON BOTTOM/BACK OF PRODUCT
WARNING: APPARATUS SHALL NOT BE EXPOSED TO DRIPPING OR
SPLASHING AND NO OBJECTS FILLED WITH LIQUIDS, SUCH AS VASES,
SHALL BE PLACED ON THE APPARATUS.
WARNING: THE MAIN POWER PLUG MUST REMAIN READILY OPERABLE
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, GROUNDING OF
THE CENTER PIN OF THIS PLUG MUST BE
MAINTAINED.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPRATUS TO RAIN OR MOISTURE.
WARNING: TO PREVENT INJURY, THIS APPARATUS MUST BE SECURELY
ATTACHED TO THE FLOOR/WALL/RACK IN
ACCORDANCE WITH THE INSTALLATION INSTRUCTIONS.
This product is AC only.

Important Safety Instructions
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. Do not block any ventilation openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. A
polarized plug has two blades with one wider than the other. A grounding type
plug has two blades and a third grounding prong. The wide blade or the third
prong are provided for your safety. If the provided plug does not fit into your
outlet, consult an electrician for replacement of the obsolete outlet.
10.Protect the power cord from being walked on or pinched particularly at plugs,
convenience receptacles, and the point where they exit from the apparatus.
11.Only use attachments/accessories specified by the manufacturer.
12.Use only with the cart, stand, tripod, bracket, or table specified by the
manufacturer, or sold with the apparatus. When a cart is used, use caution when
moving the cart/apparatus combination to avoid injury from tip-over.
13.Unplug this apparatus during lightning storms or when unused for long periods
of time.
14.Refer all servicing to qualified service personnel. Servicing is required when the
apparatus has been damaged in any way, such as power-supply cord or plug is
damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or
has been dropped.

Table
of
Contents
INTRODUCTION ....................................................................................................................................... 3
Introduction ...............................................................................................................................................................3
Description ................................................................................................................................................................3
Features ......................................................................................................................................................................4
INSTALLATION ........................................................................................................................................ 7
Configuration Pre-check ............................................................................................................................................7
DIP Switches .............................................................................................................................................................7
Mic Kill Receive ........................................................................................................................................................8
Call Signal Compatibility ..........................................................................................................................................8
Incoming Call Beep ...................................................................................................................................................8
Microphone Type ......................................................................................................................................................8
Speaker Beep for Incoming Call ...............................................................................................................................9
Balanced/Unbalanced Switch ....................................................................................................................................9
Sidetone Trimmers ....................................................................................................................................................9
Headset Connector Notes ..........................................................................................................................................9
Panel Mic Connector Notes .......................................................................................................................................9
Intercom Channel Connections ...............................................................................................................................10
Description of Phantom-Powered Connection ........................................................................................................10
Description of Locally Powered Connection ..........................................................................................................11
All Locally Powered Intercom Stations (Dry Lines) ...............................................................................................12
OPERATION AND SPECIFICATIONS ................................................................................................ 15
Power Up .................................................................................................................................................................15
Sidetone Adjustment ...............................................................................................................................................15
Channel Select (SS-2002 & SS-2002RM Only) .....................................................................................................16
Headset/Headphone/Speaker/Microphone Selection ..............................................................................................16
Receiving Calls ........................................................................................................................................................16
Calling an Intercom Channel ...................................................................................................................................17
Specifications ..........................................................................................................................................................18
Dimensions ..............................................................................................................................................................19
SS1002/2002 SUPPLEMENTAL INFORMATION ............................................................................... 21
Installing the Box to the Faceplate ..........................................................................................................................21
GENERAL INSTRUCTIONS .......................................................................................................................................................21
Notes ........................................................................................................................................................................23