TELINK SEMICONDUCTOR EVK TLSR8266BR56 User manual

Application Note:
User Guide for Telink Burning
EVK TLSR8266BR56
AN-18010500-E2
Ver 1.1.0
2018/7/27
TELINK SEMICONDUCTOR
Brief:
This document is the user guide for Telink burning
EVK TLSR8266BR56.

User Guide for Telink Burning EVK TLSR8266BR56
AN-18010500-E2 1 Ver 1.1.0
Published by
Telink Semiconductor
Bldg 3, 1500 Zuchongzhi Rd,
Zhangjiang Hi-Tech Park, Shanghai, China
© Telink Semiconductor
All Right Reserved
Legal Disclaimer
Telink Semiconductor reserves the right to make changes without further notice to
any products herein to improve reliability, function or design. Telink Semiconductor
disclaims any and all liability for any errors, inaccuracies or incompleteness contained
herein or in any other disclosure relating to any product.
Telink Semiconductor does not assume any liability arising out of the application or
use of any product or circuit described herein; neither does it convey any license
under its patent rights, nor the rights of others
The products shown herein are not designed for use in medical, life-saving, or
life-sustaining applications. Customers using or selling Telink Semiconductor products
not expressly indicated for use in such applications do so entirely at their own risk
and agree to fully indemnify Telink Semiconductor for any damages arising or
resulting from such use or sale.
Information:
For further information on the technology, product and business term, please
contact Telink Semiconductor Company (www.telink-semi.com).
For sales or technical support, please send email to the address of:
telinkcnsales@telink-semi.com
telinkcnsupport@telink-semi.com

User Guide for Telink Burning EVK TLSR8266BR56
AN-18010500-E2 3 Ver 1.1.0
Table of contents
1Brief Introduction ...................................................................................................4
2Connection Guide ...................................................................................................5
2.1 Supply power for TLSR8266BR56.....................................................................5
2.2 Download firmware into DUT via TLSR8266BR56 ...........................................6
2.3 Communication interface ................................................................................8
3Schematic................................................................................................................9
Table of figures
Figure 1 TLSR8266BR56 photo ............................................................................4
Figure 2 Connection chart to supply power for TLSR8266BR56 .........................5
Figure 3 Connection chart 1 to download FW into DUT via TLSR8266BR56.......6
Figure 4 Connection chart 2 to download FW into DUT via TLSR8266BR56.......7
Figure 5 TLSR8266BR56 communication interface .............................................8
Figure 6 TLSR8266BR56 schematic......................................................................9

User Guide for Telink Burning EVK TLSR8266BR56
AN-18010500-E2 4 Ver 1.1.0
1Brief Introduction
This document presents guide on how to use Telink TLSR8266-based burning
EVK “TLSR8266BR56”as an adapter to download firmware into target board (DUT).
Top view
Left side view Right side view
Figure 1 TLSR8266BR56 photo
CK
3V3
SWM
DO
DI
CN
TX
RX
SWS
GND
VPP
5V
miniUSB interface
USB interface
Pin header
Button
LED

User Guide for Telink Burning EVK TLSR8266BR56
AN-18010500-E2 5 Ver 1.1.0
2Connection Guide
2.1 Supply power for TLSR8266BR56
Connect the miniUSB interface of the TLSR8266BR56 with PC USB via a mini USB
cable.
Figure 2 Connection chart to supply power for TLSR8266BR56
Connect to PC USB via USB cable
miniUSB interface

User Guide for Telink Burning EVK TLSR8266BR56
AN-18010500-E2 6 Ver 1.1.0
2.2 Download firmware into DUT via TLSR8266BR56
The TLSR8266BR56 is used as burning adapter and it is preloaded with the
“8266_evk.bin”.
Method 1: Connect the TLSR8266BR56 with DUT via Single wire (Swire).
1. Connect the miniUSB interface of the TLSR8266BR56 with PC USB via a mini USB
cable.
User can observe the indicating LED to check the TLSR8266BR56: If the light
blinks once, it indicates the TLSR8266BR56 and its connection with PC are both
OK.
2. Connect the pin header of the TLSR8266BR56 with DUT via Swire: connect SWM,
GND and 3V3 of pin header with SWS, GND and 3.3V of DUT, respectively.
Figure 3 Connection chart 1 to download FW into DUT via TLSR8266BR56
Connect to GND of DUT
Connect to 3.3V of DUT
Connect to SWS of DUT
Connect to PC USB via USB cable
3V3
SWM
GND
miniUSB interface
Pin header

User Guide for Telink Burning EVK TLSR8266BR56
AN-18010500-E2 7 Ver 1.1.0
Method 2: Connect the TLSR8266BR56 with DUT via USB instead of Swire. This
method only applies to the DUT with USB interface (e.g. dongle board).
1. Connect the miniUSB interface of the TLSR8266BR56 with PC USB via a mini USB
cable.
2. Connect the USB interface of the TLSR8266BR56 with the USB interface of the
DUT.
Figure 4 Connection chart 2 to download FW into DUT via TLSR8266BR56
Connect to PC USB via USB cable
miniUSB interface
USB interface
Connect to USB interface of DUT

User Guide for Telink Burning EVK TLSR8266BR56
This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: 1)
this device may not cause harmful interference, and 2) this device must accept any interference received,
including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could void your
authority to operate the equipment.
Table of contents