Tenqa SP-109 User manual

SP-109
Bluetooth ®
Wireless Speaker
Instruction Manual
SP-109_InstructionManual.indd 1 7/1/09 6:28 PM

PACKAGE CONTENTS
• Tenqa SP-109 Bluetooth® Wireless Speaker
• 120V AC power adapter
• Instruction manual
Contents
Welcome .........................1
Operating Instructions . . . . . . . . . . . . . . . 2
2 Quick start
2 Pairing the sp-109 with your Bluetooth A2DP enabled Mobile Phone, iPod
touch®, iPhone™, or mp3 player
2 Adjusting the Volume
2 answering and making phone calls when streaming music
3 Connect Using a Cable
Troubleshooting ....................4
FAQ ............................4
Safety Information . . . . . . . . . . . . . . . . . . 5
5Bluetooth Communication
6 WARNING
6 Handling the SP-109
6 Avoid Water and Wet Locations
6 Repairing the SP-109
6 Powering the SP-109
7 Avoiding Hearing Damage
7 Driving Safely
7 Radio Frequency Interference
8 Important Handling Information
8 Using Connectors and Ports
8 Keeping the SP-109 Within Acceptable Temperatures
9 Keeping the Outside of the SP-109 Clean
9 Disposal and Recycling Information
Glossary ........................10
Specifications.....................10
Limited Warranty . . . . . . . . . . . . . . . . . . 11
Conformity Declaration . . . . . . . . . . . . . . 13
SP-109_InstructionManual.indd 2 7/1/09 6:28 PM

Welcome
Thank you for your purchase of the Tenqa™ SP-109 Bluetooth® Wireless Speaker.
You are on your way to living a life free of wires. But first, please read this user’s
guide carefully for important information concerning operation, performance and
safety. If you are unfamiliar with some of the terms in this user’s guide, please
consult the glossary located in this manual.
You will find the SP-109 to be convenient, compact and easy to connect with your
mobile phone, iPod touch®, iPhone™, computer, mp3 player, or any other device
with Bluetooth A2DP capabilities. Please note that your Bluetooth enabled music
player must be equipped with Bluetooth A2DP stereo transmitting capabili-
ties – if not, you may need a Bluetooth Wireless Transmitter.
Find the latest products at www.tenqa.com.
SP-109_InstructionManual.indd 1 7/1/09 6:28 PM

2
Operating Instructions
QUICK START
1. Insert the power adapter plug into the power socket (DC IN) on the side of the
SP-109 and plug it into a power outlet.
2. Turn the power switch on the side of the SP-109 to the ‘ON’ position.
3. After turning the SP-109 on, the blue LED indicator should flash intermittently
indicating the speaker is in “pairing mode.”
4. The speaker is now ready to connect to your Bluetooth® enabled device.
Please refer to your Bluetooth enabled device’s instruction manual for pairing
instructions if you are unsure how to do this.
PAIRING THE SP-109 WITH YOUR BLUETOOTH A2DP ENABLED
MOBILE PHONE, IPOD TOUCH®, IPHONE™, OR MP3 PLAYER
Pairing creates a unique and encrypted wireless link between the SP-109 and other
Bluetooth enabled devices such as mobile phones, mp3 players, and computers.
Make sure that the Bluetooth function on your device is enabled (refer to the
device’s instruction manual) and in close proximity to the speaker.
• Turn the power switch to ‘ON’ on the side of the SP-109.
• Perform a device discovery scan for other Bluetooth devices from your device
(please refer to user guide).
• Select the device ‘SP-109’ in the list of discovered devices.
• Enter the Bluetooth® password “0000” to pair and connect the speaker to the
device.
• If the pairing is successful, after a few seconds the speaker will connect and
play audio from your music player.
ADJUSTING THE VOLUME
To set the volume of the speakers, simply rotate the volume jog dial located on the
side of the Wireless Speaker.
ANSWERING AND MAKING PHONE CALLS WHEN STREAMING
MUSIC
If you receive a phone call while your mobile phone is connected to the SP-109,
your phone will indicate an incoming caller as normal according to your ringer
setting. Upon answering the call, the streaming audio will silence and you will hear
the audio as normal through your mobile phone. Upon completion of the call, your
SP-109_InstructionManual.indd 2 7/1/09 6:28 PM

3
music will resume playing where it left off.
Making a phone call while streaming music is simple as well. Simply dial and place
the call as normal and the music will automatically pause while the call is in prog-
ress. Upon completion of the call, your music will resume playing where it left off.
CONNECT USING A CABLE
Your SP-109 Wireless Speaker is also capable of connecting to a device with a
3.5mm audio connector. To connect the speaker to a device that has a 3.5mm
audio connector, plug the cable into the “line-in port” on the side of the speaker
and the audio output connector on the device. Switch on the device and play audio
as normal.
NOTE: You cannot use the Bluetooth function of the SP-109 while connected to
another device using the cable connection feature.
On/Off Switch
Volume Dial
Line-in Jack
Power Adapter
Bluetooth
Indicator Light
SP-109_InstructionManual.indd 3 7/1/09 6:28 PM

4
Troubleshooting
Q. Why can’t I hear sound from the SP-109?
A. Check the volume level on both the SP-109 and your Bluetooth enabled music
player. Also ensure that there are no ‘barriers’ between the SP-109 and your paired
Bluetooth® device such as walls, people or furniture as this may prevent the
speaker and device from pairing successfully.
If you still can not hear sound, reset the device that you are trying to pair the
speaker with. If this does not solve the issue then delete the pairing information
and brign the pairing process again.
Q. My device says Bluetooth® Module not found’ what can I do?
A. This means that your device cannot find its internal Bluetooth® chip for some
reason. Restarting your device should fix this problem. If not, please contact the
manufacturer of your device.
Q. My Bluetooth® device won’t pair with the speaker.
A. You need to ensure that the phone, computer or other device that you wish to
connect supports the Bluetooth A2DP stereo sound profile. The speaker will not
support a mono Bluetooth® profile. Please check with your device manufacturer to
ensure compatibility.
FAQ
Q. How far can my speaker be from the device and still play audio?
A. The SP-109will remain connected up to a range of 10 meters (30 feet). Sound
quality may start to deteriorate after about 7 meters depending on the presence of
barriers such as walls, people or furniture.
Q. Can other electrical devices interfere with Bluetooth?
A. Bluetooth technology employs a technique called frequency hopping to
constantly change the frequency at which it sends out data, reducing interference
with wireless devices like cordless landline phones. Noise interference can occur
if the Bluetooth device is used in close proximity with a microwave. Check if there
are any such devices in the surroundings, and if so keep the distance between
the SP-109 and such devices to at least 5 - 10m. Usually any interference will only
cause a slight crackling sound. The frequency of Bluetooth® is much higher than
that of radio station bands.
Q. Can somebody else take control of my SP-109 if they are in range?
A. No, the SP-109 can only connect to previously paired devices that have been
authenticated. The pairing procedure creates an encrypted key known only to the
two devices paired.
SP-109_InstructionManual.indd 4 7/1/09 6:28 PM

5
Safety Information
Please read all safety information and operating instructions before using the
SP-109 to avoid injury.
BLUETOOTH COMMUNICATION
Bluetooth wireless technology operates within a range of about 10 m (33 feet).
Install the transceiver and any connected Bluetooth device as closely to each other
as possible.
The following conditions may have a negative effect on the Bluetooth connection:
• certain obstacles (people, metal, walls, etc.)
• an electromagnetic environment
• A device with a 2.4 GHz frequency (e. g. a Wireless LAN device, cordless
telephone, or microwave oven) in use near this device. Because Bluetooth
devices and Wireless LAN (IEEE802.11b/g) use the same frequency, microwave
interferences may occur. This may lead to communication speed deterioration,
noise interference or invalid connections. In such cases, turn off the respective
device to avoid interference.
• The device is installed on a metal surface.
Microwaves emitting from a Bluetooth device may affect electronic medical
devices. To avoid accidents, turn off this device and other Bluetooth devices in the
following locations:
• near flammable gas
• In a hospital, train, airplane, or a fueling station
• near automatic doors or a fire alarm
This device supports security capabilities that comply with the Bluetooth stan-
dards to provide a secure connection when the Bluetooth wireless technology is
used, but security may not be enough depending on the setting. Be careful when
communicating using Bluetooth wireless technology.
Any Bluetooth device you want to connect to the transceiver is required to conform
with the Bluetooth standard specified by Bluetooth SIG.
Even if the connected devices may conform with the Bluetooth standard, some
devices cannot be connected or will not work correctly depending on the features
or specifications of the device.
For more information on Bluetooth safety and features, please visit www.
Bluetooth.com.
SP-109_InstructionManual.indd 5 7/1/09 6:28 PM

6
WARNING
Failure to follow these safety instructions could result in fire, electric
shock, or other injury or damage.
HANDLING THE SP-109
Do not drop, disassemble, open, crush, bend, deform, puncture, shred, microwave,
incinerate, paint, or insert foreign objects into the SP-109. Use common sense
when operating this and all electronic devices.
AVOID WATER AND WET LOCATIONS
Do not use the SP-109 in the rain, or near sinks, bathtubs or other wet locations.
Take care not to spill any food or liquid on the SP-109. In case the SP-109 gets
wet, unplug all cables, turn off the SP-109 before cleaning, and allow it to dry
thoroughly before turning it on again. Do not attempt to dry the SP-109 with an
external heat source such as a microwave oven or hair dryer.
REPAIRING THE SP-109
Never attempt to repair or modify the SP-109 yourself. The SP-109 does not contain
any user-serviceable parts. If the SP-109 has been submerged in water, punctured,
or subjected to a severe fall it is advised not to use the device again.
POWERING THE SP-109
To power the SP-109, use only the power adapter that came with this device.
Read all safety instructions for any products and accessories before using with
the SP-109. Tenqa is not responsible for the operation of third party accessories or
their compliance with safety and regulatory standards.
When using the included power adapter, make sure that the power adapter is fully
connected to the SP-109 before you plug it into a power outlet. Then insert the
SP-109’s power adapter firmly into the power outlet. Do not connect, disconnect,
unplug, or plug in the power adapter with wet hands. The power adapter may
become warm during normal use. Always allow adequate ventilation around the
Tenqa power adapter and use care when handling. Unplug and do not use the
power adapter if any of the following conditions exist:
• The power cord or plug has become frayed or damaged.
• The adapter is exposed to rain, liquid, or excessive moisture.
• The adapter case has become damaged.
• You suspect the adapter needs service or repair.
• You want to clean the adapter.
SP-109_InstructionManual.indd 6 7/1/09 6:28 PM

7
AVOIDING HEARING DAMAGE
Permanent hearing loss may occur if the SP-109 is used at high volume. Set the
volume to a safe level. You can adapt over time to a higher volume of sound that
may sound normal but can be damaging to your hearing. If you experience ringing
in your ears or muted speech, stop listening and have your hearing checked.
The louder the volume, the less time is required before your hearing could be
affected. Hearing experts suggest that to protect your hearing:
Limit the amount of time you use the SP-109 at high volume. Avoid turning up the
volume to block out noisy surroundings.
Turn the volume down if you can’t hear people speaking near you.
DRIVING SAFELY
Use of the SP-109 while operating a vehicle is not recommended and is illegal in
some areas.
EXPOSURE TO RADIO FREQUENCY ENERGY
The SP-109 contains a radio frequency receiver. When on, the SP-109 can receive
radio frequency (RF) energy through its antenna. The SP-109 is designed and
manufactured to comply with the limits for exposure to RF energy set by the
Federal Communications Commission (FCC) of the United States of America and
other countries.
If you are concerned about exposure to RF energy, you can limit your exposure by
limiting the amount of time using the SP-109 since time is a factor in how much
exposure a person receives. Placing more distance between your body and the
SP-109 is advised since exposure level drops off dramatically with distance.
For more information from the US FCC about exposure to RF energy, see: www.fcc.
gov/oet/rfsafety
For information about the scientific research related to RF energy exposure, see
the EMF Research Database maintained by the World Health Organization at:
www.who.int/emf
RADIO FREQUENCY INTERFERENCE
Nearly every electronic device is subject to radio frequency interference from ex-
ternal sources if inadequately shielded or designed, or otherwise not configured to
be compatible. As a result, the SP-109 may cause interference with other devices.
Read the following information and instructions to avoid interference problems:
Aircraft: Use of the SP-109 may be prohibited while traveling in aircraft. Please
SP-109_InstructionManual.indd 7 7/1/09 6:28 PM

8
consult local laws to determine if this device is allowed to be operated on board
an aircraft.
Vehicles: RF signals may conflict with installed or inadequately shielded elec-
tronic systems in motor vehicles. Check with the manufacturer or its representa-
tive regarding your vehicle.
Electronic Devices: Most modern electronic equipment is shielded from RF
signals. However, certain electronic equipment may not be shielded against the RF
signals from the SP-109.
Pacemakers: To avoid potential interference with pacemakers, persons with
pacemakers should always keep the SP-109 more than six inches from their
pacemaker when the device is turned on. Consult with a doctor about concerns
when using the SP-109 near a pacemaker. If you have any reason to suspect that
interference is taking place, turn the SP-109 off immediately.
Other Medical Devices: If you use any other personal medical device, consult
the device manufacturer and your physician to determine if it is adequately
shielded from external RF energy. Turn the SP-109 off in health care facilities when
any regulations posted in these areas instruct you to do so. Hospitals and health
care facilities may use equipment that is sensitive to external RF energy.
Posted Facilities: Turn off the SP-109 in any facility where posted notices so
require.
IMPORTANT HANDLING INFORMATION
NOTICE: Failure to follow these handling instructions could result in damage to
the SP-109 or other property.
USING CONNECTORS AND PORTS
Never force a connector into a port. Check for obstructions on the port. If the
connector and port don’t join with reasonable ease, they probably do not match.
Make sure that the connector matches the port and that you have positioned the
connector correctly in relation to the port.
KEEPING THE SP-109 WITHIN ACCEPTABLE TEMPERATURES
Operate the SP-109 in a place where the temperature is always between 0º and
35º C (32º to 95º F). Battery life may be reduced in low-temperature conditions.
Store the SP-109 in a place where the temperature is always between -20º and 45º
C (-4º to 113º F). Don’t leave the SP-109 in your car because temperatures in parked
cars can exceed this range and damage sensitive internal components. When you
are using the SP-109, it is normal for the device to get warm. The exterior of the
SP-109 functions as a cooling surface that transfers heat from inside the unit to
the cooler air outside.
SP-109_InstructionManual.indd 8 7/1/09 6:28 PM

9
KEEPING THE OUTSIDE OF THE SP-109 CLEAN
To clean the SP-109 unplug all cables and turn off the SP-109 (see inside this user
manual for instructions on turning off the SP-109.) Then use a soft, slightly damp,
lint-free cloth. Avoid getting moisture in openings. Do not use window cleaners,
household cleaners, aerosol sprays, solvents, alcohol, ammonia, or abrasives to
clean the SP-109. Allow adequate time for the SP-109 to dry completely before
using again.
DISPOSAL AND RECYCLING INFORMATION
The SP-109 must be disposed of properly according to local laws and regulations.
All batteries must be disposed of separately from household waste. Contact your
local authorities to learn about recycling options when the SP-109 reaches the
end of its life.
SP-109_InstructionManual.indd 9 7/1/09 6:28 PM

10
Glossary
A2DP: Advanced Audio Distribution Profile
This converts normal audio files, such as mp3 files in a mobile phone or computer,
into streaming stereo music. Many new mobile phones are being made with this
feature built-in.
AVRCP: Audio/Video Remote Control Profile
This feature allows the user to control the output of one device from a remote
device. For example, if you are listening to music on your SP-109 Wireless Speaker
from your mobile phone, you may be able to control some functions of the mobile
phone by using the headphone controls for volume, call transfer, etc.
Specifications
Bluetooth Compliance: Bluetooth v1.2
Receiver Sensitivity: -85dBm @ 0.1% BER
Class 2 RF Output Power: < +4dBm
Operation Range: Up to 10m
Audio Output Power: 2 x 5w (RMS)
Frequency Response: 150Hz ~ 20kHz
Speaker: 2 x 2 in
Dimensions: 280 x 150 x 100 mm (11 x 6 x 4 in)
Weight: 1.2 kg (2.65 lbs)
SP-109_InstructionManual.indd 10 7/1/09 6:28 PM

11
Limited Warranty
TENQA 1 YEAR LIMITED WARRANTY
FOR CONSUMERS, WHO ARE COVERED BY CONSUMER PROTECTION LAWS OR REGULATIONS IN
THEIR COUNTRY OF PURCHASE OR, IF DIFFERENT, THEIR COUNTRY OF RESIDENCE, THE BENEFITS
CONFERRED BY THIS WARRANTY ARE IN ADDITION TO ALL RIGHTS AND REMEDIES CONVEYED
BY SUCH CONSUMER PROTECTION LAWS AND REGULATIONS. THIS WARRANTY DOES NOT
EXCLUDE, LIMIT OR SUSPEND ANY RIGHTS OF CONSUMERS ARISING OUT OF NONCONFORMITY
WITH A SALES CONTRACT. SOME COUNTRIES, STATES AND PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES OR ALLOW LIMITA-
TIONS ON HOW LONG AN IMPLIED WARRANTY OR CONDITION MAY LAST, SO THE LIMITATIONS
OR EXCLUSIONS DESCRIBED BELOW MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU
SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY BY COUNTRY,
STATE OR PROVINCE. THIS LIMITED WARRANTY IS GOVERNED BY AND CONSTRUED UNDER THE
LAWS OF THE COUNTRY IN WHICH THE PRODUCT PURCHASE TOOK PLACE. TENQA, A DIVISION
OF PITTS PACIFIC, LLC, THE WARRANTOR UNDER THIS LIMITED WARRANTY, IS HEREINAFTER
REFERRED TO AS “TENQA”.
Tenqa’s warranty obligations for this hardware product are limited to the terms set forth below:
Tenqa, as defined below, warrants this hardware product against defects in materials and work-
manship under normal use for a period of ONE YEAR (365 DAYS) from the date of retail purchase by
the original end-user purchaser (“Warranty Period”). If a hardware defect arises and a valid claim
is received by Tenqa within the Warranty Period, at its option and to the extent permitted by law,
Tenqa will either (1) repair the product at no charge, using new or refurbished replacement parts,
(2) exchange the product with a product that is new or which has been manufactured from new or
serviceable used parts and is at least functionally equivalent to the original product, or (3) refund
the purchase price of the product. Tenqa may request that you replace defective parts with new
or refurbished user-installable parts that Tenqa provides in fulfillment of its warranty obligation. A
replacement product or part, including a user-installable part that has been installed in accordance
with instructions provided by Tenqa, assumes the remaining warranty of the original product or
thirty (30) days from the date of replacement or repair, whichever provides longer coverage for
you. When a product or part is exchanged, any replacement item becomes your property and the
replaced item becomes Tenqa’s property. Parts provided by Tenqa in fulfillment of its warranty
obligation must be used in products for which warranty service is claimed. When a refund is given,
the product for which the refund is provided must be returned to Tenqa and becomes Tenqa’s
property. If a defect arises and a valid claim is received by Tenqa after the first ninety (90) days of
the Warranty Period, a shipping and handling charge may apply to any repair or exchange of the
product undertaken by Tenqa.
EXCLUSIONS AND LIMITATIONS
This Limited Warranty applies only to the hardware product manufactured by or for Tenqa that can
be identified by the “Tenqa” trademark, trade name, or logo affixed to it. The Limited Warranty
does not apply to any non-Tenqa hardware product or any software, even if packaged or sold with
the Tenqa hardware. Manufacturers, suppliers, or publishers, other than Tenqa, may provide their
own warranties to the end user purchaser, but Tenqa, in so far as permitted by law, provides their
products “as is”. Tenqa does not warrant that the operation of the product will be uninterrupted or
error-free. Tenqa is not responsible for damage arising from failure to follow instructions relating
to the product’s use.
This warranty does not apply: (a) to damage caused by use with non-Tenqa products; (b) to damage
caused by accident, abuse, misuse, flood, fire, earthquake or other external causes; (c) to damage
caused by operating the product outside the permitted or intended uses described by Tenqa; (d) to
damage caused by service performed by anyone who is not a representative of Tenqa; (e) to a prod-
uct or part that has been modified to alter functionality or capability without the written permission
of Tenqa; or (f ) if any Tenqa serial number has been removed or defaced.
SP-109_InstructionManual.indd 11 7/1/09 6:28 PM

12
TO THE EXTENT PERMITTED BY LAW, THIS WARRANTY AND THE REMEDIES SET FORTH
ABOVE ARE EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, REMEDIES AND CONDI-
TIONS, WHETHER ORAL OR WRITTEN, STATUTORY, EXPRESS OR IMPLIED. AS PERMITTED BY
APPLICABLE LAW, TENQA SPECIFICALLY DISCLAIMS ANY AND ALL STATUTORY OR IMPLIED
WARRANTIES, INCLUDING, WITHOUT LIMITATION, WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE AND WARRANTIES AGAINST HIDDEN OR LATENT
DEFECTS. IF TENQA CANNOT LAWFULLY DISCLAIM STATUTORY OR IMPLIED WARRANTIES THEN
TO THE EXTENT PERMITTED BY LAW, ALL SUCH WARRANTIES SHALL BE LIMITED IN DURATION
TO THE DURATION OF THE EXPRESS WARRANTY AND TO THE REPAIR OR REPLACEMENT
SERVICE AS DETERMINED BY TENQA IN ITS SOLE DISCRETION. No Tenqa reseller, agent, or
employee is authorized to make any modification, extension, or addition to this warranty. If any
term is held to be illegal or unenforceable, the legality or enforceability of the remaining terms shall
not be affected or impaired. EXCEPT AS PROVIDED IN THIS WARRANTY AND TO THE MAXIMUM
EXTENT PERMITTED BY LAW, TENQA IS NOT RESPONSIBLE FOR DIRECT, SPECIAL, INCIDENTAL
OR CONSEQUENTIAL DAMAGES RESULTING FROM ANY BREACH OF WARRANTY OR CONDITION,
OR UNDER ANY OTHER LEGAL THEORY, INCLUDING BUT NOT LIMITED TO LOSS OF USE; LOSS OF
REVENUE; LOSS OF ACTUAL OR ANTICIPATED PROFITS (INCLUDING LOSS OF PROFITS ON CON-
TRACTS); LOSS OF THE USE OF MONEY; LOSS OF ANTICIPATED SAVINGS; LOSS OF BUSINESS;
LOSS OF OPPORTUNITY; LOSS OF GOODWILL; LOSS OF REPUTATION; LOSS OF, DAMAGE TO OR
CORRUPTION OF DATA; OR ANY INDIRECT OR CONSEQUENTIAL LOSS OR DAMAGE HOWSOEVER
CAUSED INCLUDING THE REPLACEMENT OF EQUIPMENT AND PROPERTY, THE FOREGOING
LIMITATION SHALL NOT APPLY TO DEATH OR PERSONAL INJURY CLAIMS, OR ANY STATUTORY
LIABILITY FOR INTENTIONAL AND GROSS NEGLIGENT ACTS AND/OR OMISSIONS. USE OF THIS
PRODUCT IMPLIES CONSENT OF THE AFOREMENTIONED STATEMENTS.
OBTAINING WARRANTY SERVICE
Please access and review the online help resources referred to in the documentation accompanying
this hardware product before seeking warranty service. If the product is still not functioning
properly after making use of these resources, access the online website: www.tenqa.com for
instructions on how to obtain warranty service. You must follow Tenqa’s warranty processes.
Tenqa may provide warranty service by sending you new or refurbished customer-installable
replacement product or parts to enable you to service or exchange your own product. Upon receipt
of the replacement product or part, the original product or part becomes the property of Tenqa and
you agree to follow instructions, including, if required, arranging the return of original product or
part to Tenqa in a timely manner. When service requiring the return of the original product or part,
Tenqa may require a credit card authorization as security for the retail price of the replacement
product or part and applicable shipping costs. If you follow instructions, Tenqa will cancel the
credit card authorization, so you will not be charged for the product or part and shipping costs. If
you fail to return the replaced product or part as instructed, Tenqa will charge the credit card for
the authorized amount.
Service options, parts availability and response times may vary according to the country in which
service is requested. Service options are subject to change at any time. You may be responsible for
shipping and handling charges if the product cannot be serviced in the country in which service is
requested. If you seek service in a country that is not the country of purchase, you will comply with
all applicable export laws and regulations and be responsible for all custom duties, V.A.T. and other
associated taxes and charges. For international service, Tenqa may repair or exchange defective
products and parts with comparable products and parts that comply with local standards. In
accordance with applicable law, Tenqa may require that you furnish proof of purchase details and/
or comply with registration requirements before receiving warranty service. Tenqa will maintain
and use customer information in accordance with the Tenqa Customer Privacy Policy accessible at:
www.Tenqa.com/privacy.php
SP-109_InstructionManual.indd 12 7/1/09 6:28 PM

Conformity Declaration
FCC COMPLIANCE STATEMENT
This device complies with part 15 of the FCC rules. Operation is subject to the following
two conditions: (1) This device may not cause harmful interference, and (2) this device
must accept any interference received, including interference that may cause undesired
operation.
FCC ID SETBSPC6210
Important: Changes or modifications to this product not authorized by Tenqa could void the EMC
(electromagnetic compatibility) compliance and negate your authority to operate the product. This
product has demonstrated EMC compliance under conditions that included the use of compliant
peripheral devices. It is important that you use compliant peripheral devices to reduce the possibil-
ity of causing interference to radios, televisions, and other electronic devices. This device must not
be co–located with other transmitters.
Note: This equipment has been tested and found to comply with the limits pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful inter-
ference to radio communications. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
• Consult the dealer or an experienced radio/TV technician for help.
EUROPEAN COMMUNITY COMPLIANCE STATEMENT
The equipment complies with the RF Exposure Requirement 1999/519/EC, Council Recommenda-
tion of 12 July 1999 on the limitation of exposure of the general public to electromagnetic fields
(0- 300GHz.) This equipment meets the following conformance standards: EN 300 328, EN 301 894,
EN 301 489-17, EN 50385
EUROPE—EU DECLARATION OF CONFORMITY
A copy of the Declaration of Conformity is available at: www.Tenqa.com/euro/compliance
SP-109_InstructionManual.indd 13 7/1/09 6:28 PM

Copyright © 2009 Pitts Pacific, LLC. All rights reserved. Tenqa® and the Tenqa logo are registered
trademarks of Pitts Pacific, LLC. The Bluetooth® word mark and logos are registered trademarks
owned by Bluetooth SIG, Inc. and any use of such marks by Pitts Pacific, LLC is under license.
iPod®, iPod touch® and iPhone™ are trademarks of Apple Inc., registered in the U.S. and other
countries. Apple is not responsible for the operation of this device or its compliance with safety
and regulatory standards. Other trademarks and trade names are those of their respective owners.
Tenqa reserves the right to change, without notice, product offerings or specifications. Made in
China. Printed in China. QDID: B012956
SP-109_InstructionManual.indd 14 7/1/09 6:28 PM