TEQ LITE User manual

2201-090-001DF
|55
Before using or assembling the product read the document very carefully.
Please keep the manual as you may need the included information in the future.
The product is under international patent, trademark and copyright protection.
If you cannot find the instructions in your language please visit www.teqball.com
SPECIFICATIONS OF THE PRODUCT
Unfolded dimensions: Folded dimensions:
3000x1700x900 [mm] 760x1700x1800 [mm]
Total weight: max 110 kg
The Teq Lite table must be set up properly. This is not only for better gameplay experience but also for your safety. Please follow these instructions:
Teqball is proud to provide the following warranty (the “Warranty”) on its high quality products to its consumer Customers, beyond any other legal remedies or warranties that they may have under applicable law:
Risks/costs covered by the Warranty: latent product defects relating to materials and/or workmanship; shipping, packaging, handling and customs fees relating to product repair or replacement; repair costs;
Risks/costs excluded from the Warranty: product surface damage (except paint damage or rust caused by manufacturing defects, which are covered) ; damage caused by misuse, neglect, accident; damage caused
by not following any instruction in the Owner’s Manual; normal wear and tear; damage suffered in transport; damage suffered during or after a repair or installation by unlicensed third parties; potential, indirect,
incidental, special, punitive or consequential damage, even if informed of the possibility of such beforehand;
Warranty period: 2 (two) calendar years from date of delivery to the Customer; Warranty claim window: unless otherwise specified in applicable law, 10 (ten) calendar days from the date damage was noticed
or should have been noticed; Proof of claimed damage or costs: photo or video of damage accompanied by photo of serial number; costs substantiated by written documentation; Format of warranty claim:
email to [e-mail] or fax to [phone], including (a) proof of claimed damage or costs, (b) proof of purchase including date of purchase, and (c) proof of resale if resold to another consumer;
Remedy of warranty claim: within 20 business days of receipt of a valid warranty claim, Teqball shall provide, at the Customer’s option and at Teqball’s expense, either (1) a full refund of the purchase price to
Customer’s bank account located in the country of purchase, (2) replacement with a table in the same range shipped to Customer’s address located in the country of purchase or (3) repair or replacement of a
damaged part (at Teqball’s discretion). In each case, Teqball may reclaim the damaged table or part.
Claims after warranty period: beyond the warranty period, Teqball provides quality repair services through its network of certified professionals, at the Customer’s cost.
No distributor or agent may vary the terms of this Warranty. If the terms of this Warranty contradict the terms of a sales contract entered into by Teqball, the conditions specified in such contract shall prevail.
The Teqball product you have purchased (the “Product”) is manufactured to the highest industry and safety standards (including EN 14468-1:2015; UL 962) and Teqball constantly performs quality and safety testing to ensure that these
standards are maintained or exceeded. Nevertheless, no product, especially one with heavy or moving parts, is completely risk free.
SERIOUS INJURY OR DEATH MAY RESULT FROM NOT FOLLOWING THE INSTRUCTIONS IN THE OWNER’S MANUAL, IN WHICH CASE TEQBALL AND ITS ASSOCIATED ENTITIES AND PERSONNEL DECLINE ALL LIABILITY!
IN ALL CIRCUMSTANCES, AND TO THE FULLEST EXTENT ALLOWED BY APPLICABLE LAW, TEQBALL’S LIABILITY RELATING TO DIRECT DAMAGE SUFFERED IN RELATION TO THE PRODUCT SHALL BE LIMITED TO (1)
$100,000 (ONE HUNDRED THOUSAND USD) OR (2) ACTUAL SUBSTANTIATED DAMAGES, WHICHEVER IS LOWER.
NO LIMITATION OF LIABILITY SHALL APPLY TO INJURY OR DEATH CAUSED BY TEQBALL’S GROSS NEGLIGENCE OR TO ANY OTHER DAMAGE THAT MAY NOT BE LIMITED BY APPLICABLE LAW.
IN ALL CIRCUMSTANCES, AND TO THE GREATEST EXTENT ALLOWED BY APPLICABLE LAW, TEQBALL DECLINES ALL POTENTIAL, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE OR CONSEQUENTIAL DAMAGE SUFFERED
IN RELATION TO THE PRODUCT, EVEN IF INFORMED OF THE POSSIBILITY OF SUCH BEFOREHAND.
Any liability claim must be substantiated by documentary evidence recorded within 5 calendar days of sustaining the damage and submitted to [e-mail] (or by fax to [phone]) within 10 business days of the same date,
unless longer claim windows are provided by applicable law.
PRODUCT LIABILITY
TEQBALL PRODUCT WARRANTY (EU,US)
PICTOGRAM DESCRIPTION
INFORMATION FOR USERS ENGLISH (EU,US)
Clean the surface with warm water and use a mop (DO NOT use any abrasive sponges). Regular maintenance is essential to keep the Teq Lite table safe and reliable. At least twice a month check all screws, nuts to ensure
that they function properly. During the periods when your Teq Lite is out of use, it is recommended to fold up the tabletops, cover the product and store it indoors. This way you will have a better chance to avoid
weather-caused damages such as fading of the tabletop or corrosion of the steel structure.
Replacing any component with an improper part makes the table unsafe. Always use original Teq Lite components for replacements! In case of any question please contact us on [email protected]
Please, follow closely these instructions when assembling the table; warranty claims are not valid if the assembly is faulty. Teq Lite table is a specially designed piece of sports equipment and it is not suitable for any
other purposes.
SAFETY AND WARNINGS
HANDLING & MAINTENANCE
2001/95/EC General Product Safety Directive
EN 14468-1:2015 (where relevant)
The product can be used
by wheelchair users.
OPENclose
Do not leave children unsupervised
around the table (including setting-up
and storing periods as well).
Warranty void if seal
broken or removed.
It is forbidden to store the table
without locking the wheel.
It is forbidden to jump on or
kick the table.
It is forbidden to move the
table in unfolded position.
It is forbidden to use the table in
extreme weather conditions.
Please store the table sheltered
from the wind as otherwise
accidents can happen.
It is forbidden to keep the table
on sloping ground either folded
or unfolded.
It is forbidden to jump, stand,
sit or lean on the table.
Folding up and down the heavy tabletop
must be done by two people. Always
keep your back straight when lifting.
Do not touch the moving
elements during moving or
folding up/down the table.
This product is certified by:
2x
Keep horizontal Tighten completely (5 Nm) Stop halfway (2 Nm) Repeat on both sides Identify parts by length Use of electric or pneumatic
screwdrivers is prohibited
Do not use in case of missing
or defective parts.
EN
2

2201-090-001DF
|55
111kg
64kg
1527
1590
120
1527
1590
130
66kg
1x
2/2
1/2
1x
5 Nm 2 Nm
27

2201-090-001DF
|55
C1
x2
C2
x2
C3
x4
C5
x4
L=960 mm
L=1230 mm
L=1310 mm
L=1235 mm
L=947 mm
L=706 mm
L=546 mm
C6
x4
C7
x4
C9
x2
C10
x4
C11
x2
C12
x2
C13
x2
C14
x2
C15
x4
C16
x1
C17
x2
x2
C19
x1
C20
x2
C21
x4
C22
x4
C18
x2
C8
x2
C4
x4
28

2201-090-001DF
|55
F1
x16
F2
x14
F3
x4
F5
x4
F6
x12
F7
x4
F8
x18
F9
x2
F10
x8
F11
x2
F12
x4
M6x90mm
M6x110mm
M8x55mm
M8x100mm
M8x110mm
M6x16mm
M6x30mm
M6x35mm
F4
x4
M6x40mm
M6x50mm
M6x60mm
M6x65mm
1010
0
020
20 3030 4040 5050 6060 7070 8080 9090 100100 110110 120 [
120 [
mmmm
]]
F13 x54 F14 x14 F15 x4
M6
M8
M12
30 mm
A1 x8
80mm
A2 x2 A3 x16 A7 x8 A6 x24 A4 x8 A10 x4 A5 x8 A9 x4
E1 x16 E2 x14 E3 x8 E4 x16
10x20mm 20x30mm 20x20mm30x30mm
F16 x78 F17 x14 F18 x4
D12 mm D16 mm
F19 x4
D24 mm
2,5 mm
D24 mm
1,3 mm
A8 x4
D15 mm
D18 mm
D10 mm D14 mm D9 mm D7,3 mm D6,3 mm
10 mm
9 mm
2,5 mm
29

10
020 30 40 50 60 70 80 90 100 110 120 130 140 150 [
mm]
2201-090-001DF
|55
0.
x16
E1
x14
E2
E3
x8
E4 x16
C5
E1 E1
x4
x4
C6
E4
L=960 mm
L=546 mm
L=1230 mm
L=706 mm
L=1310 mm
L=1235 mm
L=947 mm
x4
C7
E2 E2
x2
C13
E2 E2
x1
C16
E2 E2
x4
C21
E3 E3
C18
E1 E1
x2
F10
x8
M8x55mm
10
10
0
0
20
20
30
30
40
40
50
50
10
10
0
0
20
20
F1
x16
F2
x14
M6x30mm
10
10
0
0
20
20
30
30
F3
x4
M6x35mm
10
10
0
0
20
20
30
30
F4
x4
10
10
0
0
20
20
30
30
40
40
F5
x4
10
10
0
0
20
20
30
30
40
40
50
50
F6
x12
M6x60mm
10
10
0
0
20
20
30
30
40
40
50
50
60
60
F7
x4
M6x65mm
10
10
0
0
20
20
30
30
40
40
50
50
60
60
F8
x18
M6x90mm
10
10
0
0
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
F9
x2
M6x110mm
10
10
0
0
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
110
110
F11
x2
M8x100mm
10
10
0
0
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
10
10
0
0
20
20
30
30
40
40
50
50
60
60
70
70
80
80
90
90
100
100
110
110
F12
x4
M8x110mm
2201-090-003AF
F10-
F12F1- F9
E2
x14
20x30mm
F15
x4
M12
F13
x54
M6
F14
x14
M8
F16
x78
D12mm
F17
x14
D16mm
F18
x4
D24mm
2,5mm
F19
x4
D24mm
1,3mm
E3
x8
E1
x16
10x20mm
E4
x16
30x30mm
A1
x8
30mm
D15mm
80mm
A2
x2
D18mm
A3
x16
D10mm
10mm
A4
x8
D14mm
9mm
A5
x8
D9mm
2,5mm
A10
x4
A9
x4
A8
x4
A6
x24
D7,3mm
A7
x8
D6,3mm
20x20mm
2201-090-004AF
1.
30

|55
2201-090-001DF
F18 -
F19 F10 - F12 F1- F9
F16F17
C17
E1 E1
x2
C14
E4 E4
x2
x4
E4
E4
C15
31

10
020 30 40 50 60 70 80 90 100 110 120 130 140 150 [
mm]
2201-090-001DF
|55
C4
C1
C3
C4
C5
C5
C4
C3
F1
F1
F16 F16
F2 F2
F16
x2
2.
F1 x12
F16 x20
D12
M6x30
L=9 6 0 mm
C4 x4 C5 x4 C3 x4 C1 x2
F2 x8
M6x16
32

|55
2201-090-001DF
F18 -
F19 F10 - F12 F1- F9
F16F17
x2
3.
F1 x4 A5 x8
M6x16
F16 x4 C2 x2
C2
F1
F16
A5
C2
F16
F1
C3
C3
C3
D12
33

10
020 30 40 50 60 70 80 90 100 110 120 130 140 150 [
mm]
2201-090-001DF
|55
C7
C8
F17
F16
F13
F11
A2
C8
F14
F3
F3
1.
2.
3.
x2
4.
F3 x4
F13 x4 F16 x4
F14 x2 F17 x2
A2 x2 C8 x2 C7 x2
F11 x2
L=1230mm
M6
M8
D12
D16 M8x100
M6x35
34

|55
2201-090-001DF
F18 -
F19 F10 - F12 F1- F9
F16F17
C7
C22
C6
C6
C22
F16 F13
F16 F13
C6
A9
A10
A9
A10
A9
A10
1.
2.
F4
F2
F6
x2
5.
F2 x4
F4 x4
F6 x4
F13 x12 F16 x12 C6 x4 C22 x4 A9 x4 A10 x4
M6x60
M6L=5 4 6 m m D12
M6x30
M6x40
35

10
020 30 40 50 60 70 80 90 100 110 120 130 140 150 [
mm]
2201-090-001DF
|55
C7
F10
C7
F6
A3
F13
F16
x2
6.
F6 x4
F13 x4 F16 x4 A3 x8 C7 x2
M6x60M6D12L=1230mm
36

|55
2201-090-001DF
F18 -
F19 F10 - F12 F1- F9
F16F17
7.
37

10
020 30 40 50 60 70 80 90 100 110 120 130 140 150 [
mm]
2201-090-001DF
|55
A6
A6
A6
A6
A7
A6
A6
A7
x2
8.
A7 x8 A6 x8
38

|55
2201-090-001DF
F18 -
F19 F10 - F12 F1- F9
F16F17
x1
9.
C20
C19
C20
F2
F13
F16
F2
F13
F16
F2 x2
F13 x2 F16 x2 C19 x1 C20 x2
M6x30M6D12
39

10
020 30 40 50 60 70 80 90 100 110 120 130 140 150 [
mm]
2201-090-001DF
|55
x1
10.
C15
C15
F8
C15
C15
F13
F16
F8 x2
F13 x2 F16 x2 C15 x4
M6x90M6D12
40

|55
2201-090-001DF
F18 -
F19 F10 - F12 F1- F9
F16F17
x1
11.
F8 x4
F13 x4 F16 x4
F8
F13
C16
C16
F16
C16 x1
M6x90L=1310 m m M6D12
41

10
020 30 40 50 60 70 80 90 100 110 120 130 140 150 [
mm]
2201-090-001DF
|55
x2
12.
C14
A3
C13
A3
F6
A4
A4
F13
F16
3.
4.
5.
6.
1.
2.
F6 x4
F13 x4 F16 x4 C14 x2 C13 x2 A4 x8 A3 x8
M6x60M6D12L=7 0 6 m m
42

|55
2201-090-001DF
F18 -
F19 F10 - F12 F1- F9
F16F17
x1
13.
F8 x4
F13 x4 F16 x4
F8
F13
F16
M6x90M6D12
43

10
020 30 40 50 60 70 80 90 100 110 120 130 140 150 [
mm]
2201-090-001DF
|55
C1
7
C17
F13
F16
F13
F5
F5
F16
x1
14.
F5 x4
F13 x4 F16 x4 C17 x2
M6x50M6D12
44