Termikel 13576 User manual
-3-
ANKASTRE FIRIN
KULLANMA KILAVUZU
Ürününüzü kolayca ve daha iyi kullanmak için lütfen kullanma
klavuzunu okuyunuz. Daha sonra yararlanmak üzere güvenli, bir yerde
muhafaza ediniz.
2.nci bölümde emniyetle ilgili bilgileri bulabilirsiniz. Lütfen
ürününüzde herhangi bir arza veya eksiklik olup olmadn kontrol ediniz.
Nakliyattan ileri gelen herhangi bir arza tespit etmeniz durumunda,
lütfen ürünü aldnz satubesi ile veya ürünü size gönderen büyük
maaza ile temasa geçiniz. Frnnz iyi günlerde kullanmanz dileriz.
��NDEK�LER:
Bölüm 1
Teknik Özellikler & Frnn Bölümleri
Bölüm 2
Önemli Güvenlik Uyarlar
Bölüm 3
Frnn Yerleimi
Bölüm 4
Kontrol Panelinin Tantm
Bölüm 5
Frnlarn Kullanm
Bölüm 6
Frnda Izgara
Bölüm 7
Zaman Saati Ayar (Opsiyonel)
Bölüm 8
Bakm ve Temizlik
Bölüm 9
Nakliyelelgili Bilgiler
Bölüm 10
Sorun Giderme
-3-
BÖLÜM 1 FIRININ TEKN�K ÖZELL�KLER�
FIRININ BÖLÜMLER�
1 – Frn Kulbu
2 – Frn Cam Kapak
3 – Trivet Izgara
4 – Tepsi
5 – Tel zgara
6 – Frn Contas
7 – Kumanda Panel Sac
8 – Kontrol dümeleri
9 – Dijital Zaman Saati
10 – D Gövde
11 – ç Gövde
12 – Alt Rezistans
13 – Üst Rezistans
14 – ç Aydnlatma
Lambas
BÖLÜM 1 FIRININ TEKN�K ÖZELL�KLER�
FIRININ BÖLÜMLER�
1 – Frn Kulbu
2 – Frn Cam Kapak
3 – Trivet Izgara
4 – Tepsi
5 – Tel zgara
6 – Frn Contas
7 – Kumanda Panel Sac
8 – Kontrol dümeleri
9 – Dijital Zaman Saati
10 – D Gövde
11 – ç Gövde
12 – Alt Rezistans
13 – Üst Rezistans
14 – ç Aydnlatma
Lambas
BÖLÜM 1 FIRININ TEKN�K ÖZELL�KLER�
FIRININ BÖLÜMLER�
1 – Frn Kulbu
2 – Frn Cam Kapak
3 – Trivet Izgara
4 – Tepsi
5 – Tel zgara
6 – Frn Contas
7 – Kumanda Panel Sac
8 – Kontrol dümeleri
9 – Dijital Zaman Saati
10 – D Gövde
11 – ç Gövde
12 – Alt Rezistans
13 – Üst Rezistans
14 – ç Aydnlatma
Lambas
ALBA-D
ALBA SERİSİ
OW13-DM8
58
58
58 58
58 58 58
58
OW15-K5M-N
BÖLÜM 1 FIRININ TEKN�K ÖZELL�KLER�
FIRININ BÖLÜMLER�
1 – Frn Kulbu
2 – Frn Cam Kapak
3 – Trivet Izgara
4 – Tepsi
5 – Tel zgara
6 – Frn Contas
7 – Kumanda Panel Sac
8 – Kontrol dümeleri
9 – Dijital Zaman Saati
10 – D Gövde
11 – ç Gövde
12 – Alt Rezistans
13 – Üst Rezistans
14 – ç Aydnlatma
Lambas
ANİMA-C
OW17-APD8-T
BÖLÜM 1 FIRININ TEKN�K ÖZELL�KLER�
FIRININ BÖLÜMLER�
1 – Frn Kulbu
2 – Frn Cam Kapak
3 – Trivet Izgara
4 – Tepsi
5 – Tel zgara
6 – Frn Contas
7 – Kumanda Panel Sac
8 – Kontrol dümeleri
9 – Dijital Zaman Saati
10 – D Gövde
11 – ç Gövde
12 – Alt Rezistans
13 – Üst Rezistans
14 – ç Aydnlatma
Lambas
ANİMA-A
OW17 -AD6
58
58
1200
BUILT-IN OVEN
USER’S MANUAL
Please read these instructions carefully before attempting to install or use this
product. It is advisable to keep these instructions in a safe place for future reference.
Installation and Operating Instructions
BUILT-IN OVEN
USER’S MANUAL
Please read these instructions carefully before attempting to install or use this
product. It is advisable to keep these instructions in a safe place for future reference.
Installation and Operating Instructions
BUILT-IN ELECTRICAL OVEN
USER’S MANUAL
Dear Client,
Thank you very much about buying our product. You can trust our products.
This is a detailed User’s Manual which you can read it to use your product easier
and better. It is advisable to keep these instructions in a safe place for future
reference.
You can find safety information in section 2. Please check your product that
it has got any failure or lacking. If you find a damage sourced by transportation,
please contact with sales department that you bought product or region store that
sent product to you.
We hope you use your oven in good days.
TABLE of CONTENTS
SECTION 1
Technical Features & Sectons of Oven
SECTION 2
Important Safety Notices
SECTION 3
Installation of Built-In Oven
SECTION 4
Introducton of Control Panel
SECTION 5
Usage of Oven
SECTION 6
Grill Function of Oven
SECTION 7
Adjustment of Timer (Optional)
SECTION 8
Maintenance & Cleaning
SECTION 9
Information on Transportation
SECTION 10
Things To Do Before Calling Authorised Service
SECTION 1
TECHNICAL FEATURES of OVEN
SECTIONS of OVEN
13250 / -i
13270 / -i
1 – Control Panel
2 – Side Handle
3 – Door Handle
4 – Oven Door
5 – Trays
6 – Wire Grate
7 – Trivet Grate
8 – Drawers
9 – Command Buttons
10 – Digital Timer
11 – Oven Lamp
12 – Inner Body
13 – Upper Resistance
14 – Inner Lamp
15 – Lower Resistance
16 – Oven Gasket
Fi
g
ure.1
Fi
g
ure.2
SECTION 1
TECHNICAL FEATURES of OVEN
MODEL
ASTRO
A OW15-
K5M
ASTRO
B
(OW15-
D7)
ASTRO
C (OW15-
DM8-T )
ALBA A
OW13-
M5
ALBA B
OW13-
D7
Thermostat (C)
50 - 285 50 - 285 50 - 285
50 – 285 50 – 285
Timer
Oven Volume {It)
66 66 66
66 66
Max Oven
Power (W)
2500 2500 2500
2500 2500
Grili Power (W) 2000 2000 2000
2000 2000
Voltage (Volt)
)220 – 16
220 – 16
220 – 16
220 –
16
220 –
16
Frequency (Hz.)
50 - 60 50 - 60 50 - 60
50 – 60 50 – 60
Fan - + + - +
Energy
Efficiency Class
Energy
Consumption
(Conventional)
(Kilowatt-hour)
0,76 0,76 0,76
0,76 0,76
Energy
Consumption
(forced air
conv.)(Kilowatt-
hour}
0,75 0,75 0,75
0,75 0,75
Weight (Kg) 40 40 40 40 40
Wit"
,
imrni
594 594 594
594 594
Length
(mm)
560 560 560
560 560
DIMEN
SIONS
Height
(mm)
594 594 594 594 594
SECTIONS of OVEN
13250 / -i
13270 / -i
1 – Control Panel
2 – Side Handle
3 – Door Handle
4 – Oven Door
5 – Trays
6 – Wire Grate
7 – Trivet Grate
8 – Drawers
9 – Command Buttons
10 – Digital Timer
11 – Oven Lamp
12 – Inner Body
13 – Upper Resistance
14 – Inner Lamp
15 – Lower Resistance
16 – Oven Gasket Fi
g
ure.1
Fi
g
ure.2
SECTION 1
TECHNICAL FEATURES of OVEN
MODEL
ASTRO
A OW15-
K5M
ASTRO
B
(OW15-
D7)
ASTRO
C (OW15-
DM8-T )
ALBA A
OW13-
M5
ALBA B
OW13-
D7
Thermostat (C) 50 - 285 50 - 285 50 - 285 50 – 285 50 – 285
Timer
Oven Volume {It)
66 66 66
66 66
Max Oven
Power (W)
2500 2500 2500
2500 2500
Grili Power (W)
2000 2000 2000 2000 2000
Voltage (Volt))220 – 16
220 – 16
220 – 16 220 –
16
220 –
16
Frequency (Hz.) 50 - 60 50 - 60 50 - 60 50 – 60 50 – 60
Fan
- + +
- +
Energy
Efficiency Class
Energy
Consumption
(Conventional)
(Kilowatt-hour)
0,76 0,76 0,76
0,76 0,76
Energy
Consumption
(forced air
conv.)(Kilowatt-
hour}
0,75 0,75 0,75
0,75 0,75
Weight (Kg) 40 40 40 40 40
Wit"
,
imrni
594 594 594
594 594
Length
(mm)
560 560 560
560 560
DIMEN
SIONS
Height
(mm)
594 594 594
594 594
SECTIONS of OVEN
13250 / -i
13270 / -i
1 – Control Panel
2 – Side Handle
3 – Door Handle
4 – Oven Door
5 – Trays
6 – Wire Grate
7 – Trivet Grate
8 – Drawers
9 – Command Buttons
10 – Digital Timer
11 – Oven Lamp
12 – Inner Body
13 – Upper Resistance
14 – Inner Lamp
15 – Lower Resistance
16 – Oven Gasket Fi
g
ure.1
Fi
g
ure.2
SECTION 1
TECHNICAL FEATURES of OVEN
MODEL
ASTRO
A OW15-
K5M
ASTRO
B
(OW15-
D7)
ASTRO
C (OW15-
DM8-T )
ALBA A
OW13-
M5
ALBA B
OW13-
D7
Thermostat (C)
50 - 285 50 - 285 50 - 285
50 – 285 50 – 285
Timer
Oven Volume {It)
66 66 66
66 66
Max Oven
Power (W)
2500 2500 2500
2500 2500
Grili Power (W) 2000 2000 2000
2000 2000
Voltage (Volt)
)220 – 16
220 – 16
220 – 16
220 –
16
220 –
16
Frequency (Hz.)
50 - 60 50 - 60 50 - 60
50 – 60 50 – 60
Fan
- + +
- +
Energy
Efficiency Class
Energy
Consumption
(Conventional)
(Kilowatt-hour)
0,76 0,76 0,76
0,76 0,76
Energy
Consumption
(forced air
conv.)(Kilowatt-
hour}
0,75 0,75 0,75
0,75 0,75
Weight (Kg) 40 40 40 40 40
Wit",
imrni
594 594 594
594 594
Length
(mm)
560 560 560
560 560
DIMEN
SIONS
Height
(mm)
594 594 594 594 594
SECTIONS of OVEN
13250 / -i
13270 / -i
1 – Control Panel
2 – Side Handle
3 – Door Handle
4 – Oven Door
5 – Trays
6 – Wire Grate
7 – Trivet Grate
8 – Drawers
9 – Command Buttons
10 – Digital Timer
11 – Oven Lamp
12 – Inner Body
13 – Upper Resistance
14 – Inner Lamp
15 – Lower Resistance
16 – Oven Gasket
Fi
g
ure.1
Fi
g
ure.2
ASTRO
A OW15-
K5M
ASTRO
B
(OW15-
D7)
ASTRO
C (OW15-
DM8-T )
ALBA A
OW13-
M5
ALBA B
OW13-
D7
ALBA C
OW13-
DM8-T
Thermostat (C)
50 - 285 50 - 285 50 - 285
50 – 285 50 – 285 50 – 285
Timer
Oven Volume {It)
66 66 66
66 66 66
Max Oven
Power (W)
2500 2500 2500
2500 2500 2500
Grili Power (W)
2000 2000 2000
2000 2000 2000
Voltage (Volt)
)220 – 16
220 – 16
220 – 16
220 –
16
220 –
16
220 –
16
Frequency (Hz.)
50 - 60 50 - 60 50 - 60
50 – 60 50 – 60 50 – 60
Fan
- + +
- + +
Energy
Efficiency Class
Energy
Consumption
(Conventional)
(Kilowatt-hour)
0,76 0,76 0,76
0,76 0,76 0,76
Energy
Consumption
(forced air
conv.)(Kilowatt-
hour}
0,75 0,75 0,75
0,75 0,75 0,75
Weight (Kg)
40 40 40
40 40 40
Wit",
imrni
594 594 594
594 594 594
Length
(mm)
560 560 560
560 560 560
DIMEN
SIONS
Height
(mm)
594 594 594
594 594 594
SECTIONS of OVEN
13250 / -i
13270 / -i
1 – Control Panel
2 – Side Handle
3 – Door Handle
4 – Oven Door
5 – Trays
6 – Wire Grate
7 – Trivet Grate
8 – Drawers
9 – Command Buttons
10 – Digital Timer
11 – Oven Lamp
12 – Inner Body
13 – Upper Resistance
14 – Inner Lamp
15 – Lower Resistance
16 – Oven Gasket Fi
g
ure.1
Fi
g
ure.2
SECTIONS of OVEN
13250 / -i
13270 / -i
1 – Control Panel
2 – Side Handle
3 – Door Handle
4 – Oven Door
5 – Trays
6 – Wire Grate
7 – Trivet Grate
8 – Drawers
9 – Command Buttons
10 – Digital Timer
11 – Oven Lamp
12 – Inner Body
13 – Upper Resistance
14 – Inner Lamp
15 – Lower Resistance
16 – Oven Gasket
Fi
g
ure.1
Fi
g
ure.2
SECTION 1
TECHNICAL FEATURES of OVEN
MODEL
Energy
Wit"
Length
(mm)
DIMEN
SIONS
Height
(mm)
SECTIONS of OVEN
13250 / -i
13270 / -i
1 – Control Panel
2 – Side Handle
3 – Door Handle
4 – Oven Door
5 – Trays
6 – Wire Grate
7 – Trivet Grate
8 – Drawers
9 – Command Buttons
10 – Digital Timer
11 – Oven Lamp
12 – Inner Body
13 – Upper Resistance
14 – Inner Lamp
15 – Lower Resistance
16 – Oven Gasket Fi
g
ure.1
Fi
g
ure.2
SECTION 1
TECHNICAL FEATURES of OVEN
MODEL
Energy
Wit"
Length
(mm)
DIMEN
SIONS
Height
(mm)
SECTIONS of OVEN
13250 / -i
13270 / -i
1 – Control Panel
2 – Side Handle
3 – Door Handle
4 – Oven Door
5 – Trays
6 – Wire Grate
7 – Trivet Grate
8 – Drawers
9 – Command Buttons
10 – Digital Timer
11 – Oven Lamp
12 – Inner Body
13 – Upper Resistance
14 – Inner Lamp
15 – Lower Resistance
16 – Oven Gasket Fi
g
ure.1
Fi
g
ure.2
SECTION 1
TECHNICAL FEATURES of OVEN
MODEL
Energy
Wit"
Length
(mm)
DIMEN
SIONS
Height
(mm)
SECTIONS of OVEN
13250 / -i
13270 / -i
1 – Control Panel
2 – Side Handle
3 – Door Handle
4 – Oven Door
5 – Trays
6 – Wire Grate
7 – Trivet Grate
8 – Drawers
9 – Command Buttons
10 – Digital Timer
11 – Oven Lamp
12 – Inner Body
13 – Upper Resistance
14 – Inner Lamp
15 – Lower Resistance
16 – Oven Gasket
Fi
g
ure.1
Fi
g
ure.2
ASTRO
A OW15-
K5M
ASTRO
B
(OW15-
D7)
ASTRO
C (OW15-
DM8-T )
ALBA A
OW13-
M5
ALBA B
OW13-
D7
ALBA C
OW13-
DM8-T
Thermostat (C) 50 - 285 50 - 285 50 - 285 50 – 285 50 – 285 50 – 285
Timer
Oven Volume {It)
66 66 66
66 66 66
Max Oven
Power (W)
2500 2500 2500
2500 2500 2500
Grili Power (W)
2000 2000 2000
2000 2000 2000
Voltage (Volt)
)220 – 16
220 – 16
220 – 16
220 –
16
220 –
16
220 –
16
Frequency (Hz.) 50 - 60 50 - 60 50 - 60 50 – 60 50 – 60 50 – 60
Fan - + + - + +
Energy
Efficiency Class
Energy
Consumption
(Conventional)
(Kilowatt-hour)
0,76 0,76 0,76 0,76 0,76 0,76
Energy
Consumption
(forced air
conv.)(Kilowatt-
hour}
0,75 0,75 0,75 0,75 0,75 0,75
Weight (Kg) 40 40 40 40 40 40
Wit",
imrni
594 594 594 594 594 594
Length
(mm)
560 560 560 560 560 560
DIMEN
SIONS
Height
(mm)
594 594 594 594 594 594
SECTIONS of OVEN
13250 / -i
13270 / -i
1 – Control Panel
2 – Side Handle
3 – Door Handle
4 – Oven Door
5 – Trays
6 – Wire Grate
7 – Trivet Grate
8 – Drawers
9 – Command Buttons
10 – Digital Timer
11 – Oven Lamp
12 – Inner Body
13 – Upper Resistance
14 – Inner Lamp
15 – Lower Resistance
16 – Oven Gasket Fi
g
ure.1
Fi
g
ure.2
-2-
BUILT-IN ELECTRICAL OVEN
USER’S MANUAL
Dear Client,
Thank you very much about buying our product. You can trust our products.
This is a detailed User’s Manual which you can read it to use your product easier
and better. It is advisable to keep these instructions in a safe place for future
reference.
You can find safety information in section 2. Please check your product that
it has got any failure or lacking. If you find a damage sourced by transportation,
please contact with sales department that you bought product or region store that
sent product to you.
We hope you use your oven in good days.
TABLE of CONTENTS
SECTION 1
Technical Features & Sectons of Oven
SECTION 2
Important Safety Notices
SECTION 3
Installation of Built-In Oven
SECTION 4
Introducton of Control Panel
SECTION 5
Usage of Oven
SECTION 6
Grill Function of Oven
SECTION 7
Adjustment of Timer (Optional)
SECTION 8
Maintenance & Cleaning
SECTION 9
Information on Transportation
SECTION 10
Things To Do Before Calling Authorised Service
-2-
SECTION 1
TECHNICAL FEATURES of OVEN
-3-
COLOUR INOX+BLACK
FUEL TYPE ELECTRICAL
TIMER FULL TOUCH CONTROL
OVEN INNER CAVITY 1
COOKING FUNCTION 11 FUNCTION
OVEN VOLUME 58 LITER
OVEN PO ER 3350 ATT
GRILL PO ER 3200 ATT
TURBO REZISTANCE 2000 ATT
TURBO FAN YES
TOTAL PO ER 3350 ATT
THERMOSTAT OVEN 0-285 C
SECURITY 160 C
VOLTAGE 230 V
FREQUENCY 50-60 HZ
ENERGY CLASS A
ENERGY CONSUMPTION ( CONVENSIONAL-K H)
ENERGY CONSUMPTION – FORCED AIR- K H
DIMENSIONS
IDTH ( MM ) 594
DEPTH ( MM) 540
HEIGHT ( MM ) 595
S ITCH NO FULL TOUCH CONTROL
0,84 Kwh
0,79 Kwh
MK>
SECTION 1
TECHNICAL FEATURES of OVEN
-3-
COLOUR INOX+BLACK
FUEL TYPE ELECTRICAL
TIMER FULL TOUCH CONTROL
OVEN INNER CAVITY 1
COOKING FUNCTION 11 FUNCTION
OVEN VOLUME 58 LITER
OVEN PO ER 3350 ATT
GRILL PO ER 3200 ATT
TURBO REZISTANCE 2000 ATT
TURBO FAN YES
TOTAL PO ER 3350 ATT
THERMOSTAT OVEN 0-285 C
SECURITY 160 C
VOLTAGE 230 V
FREQUENCY 50-60 HZ
ENERGY CLASS A
ENERGY CONSUMPTION ( CONVENSIONAL-K H)
ENERGY CONSUMPTION – FORCED AIR- K H
DIMENSIONS
IDTH ( MM ) 594
DEPTH ( MM) 540
HEIGHT ( MM ) 595
S ITCH NO FULL TOUCH CONTROL
0,84 Kwh
0,79 Kwh
MK>
SECTION 2 IMPORTANT SAFETY NOTICES
This Built-in electrical oven is manufactured for using preparation of normal
home meals. Please do not use for other purposes.
Installation
- This appliance must be installed by qualified personnel, according to the
manufacturer’s instructions and to the relevant Safety Standards.
- This appliance is heavy. Take care when moving it.
- Remove all packaging, protective films and oils From the appliance before using
for the first time.
- Ensure that the electrical supply complies with The type stated on the rating
plate.
- Do not attempt to modify the appliance in any way.
- Usage voltage of your oven is 230 Volt - 50 Hz.
Warning: This appliance must be earthed.
When you have finished cooking check that all controls are in the OFF
position.
- Please check your electrical installation to have earthed or not. �f it is not earthed,
make it earthed by a capable electrical technician .
- It must be used min 16 A Fuse for electrical connection of your oven.
- Please be sure that plug of your oven cooker is accidentally if the pulled beyond
the extent of the power cord, the Earth wire will pull out last. �f your residence did
not contain earth system the producer company does not responsible about the
damaged event.
- Connection can only be done by MJR Electronics Authorised Service company or an
expert authorised by customer relations.
- For connecting the electric cooker to its power supply, please use a cord size
3 x 2.5 mm2
- For isolation safety length of power cord must not exceed 2 meters.
- Connection sheme is being on oven’s back wall.
- Please adjust timer when electricity cut off. If timer is not adjusted, oven side will
not work.
Children Safety
- This appliance is designed to be operated by adults. Do not allow children to
play near or with the appliance.
- The appliance gets hot when it is in use. Children should be kept away until it
has cooled down.
- Children can also injure themselves by pulling pans or pots off the appliance.
1. Oven Handle
2. Oven Glassdoor
3. Tray
4. Grid
5. Oven Gasket
6. Control Panel
7. Control Knob
8. Foreign Body
9. Inner Body
10. Lower Resistance
11. Upper Resistance
12. Indicator Light
13. Signal Lamp
14. Timer
Fi
g
ure.1
Fi
g
ure.2
SECTIONS of OVEN
14
13
13
SECTION 2 IMPORTANT SAFETY NOTICES
This Built-in electrical oven is manufactured for using preparation of normal
home meals. Please do not use for other purposes.
Installation
- This appliance must be installed by qualified personnel, according to the
manufacturer’s instructions and to the relevant Safety Standards.
- This appliance is heavy. Take care when moving it.
- Remove all packaging, protective films and oils From the appliance before using
for the first time.
- Ensure that the electrical supply complies with The type stated on the rating
plate.
- Do not attempt to modify the appliance in any way.
- Usage voltage of your oven is 230 Volt - 50 Hz.
Warning: This appliance must be earthed.
When you have finished cooking check that all controls are in the OFF
position.
- Please check your electrical installation to have earthed or not. �f it is not earthed,
make it earthed by a capable electrical technician .
- It must be used min 16 A Fuse for electrical connection of your oven.
- Please be sure that plug of your oven cooker is accidentally if the pulled beyond
the extent of the power cord, the Earth wire will pull out last. �f your residence did
not contain earth system the producer company does not responsible about the
damaged event.
- Connection can only be done by MJR Electronics Authorised Service company or an
expert authorised by customer relations.
- For connecting the electric cooker to its power supply, please use a cord size
3 x 2.5 mm2
- For isolation safety length of power cord must not exceed 2 meters.
- Connection sheme is being on oven’s back wall.
- Please adjust timer when electricity cut off. If timer is not adjusted, oven side will
not work.
Children Safety
- This appliance is designed to be operated by adults. Do not allow children to
play near or with the appliance.
- The appliance gets hot when it is in use. Children should be kept away until it
has cooled down.
- Children can also injure themselves by pulling pans or pots off the appliance.
1. Oven Handle
2. Oven Glassdoor
3. Tray
4. Grid
5. Oven Gasket
6. Control Panel
7. Control Knob
8. Foreign Body
9. Inner Body
10. Lower Resistance
11. Upper Resistance
12. Indicator Light
13. Signal Lamp
14. Timer
Fi
g
ure.1
Fi
g
ure.2
SECTIONS of OVEN
14
13
13
--
--
- Before using your product please take out packing materials on oven. Do not
forget to take out cartoons on sides of trays and wire grate and strafor that stick on
front panel. Packing material can cause a danger for children.
Attention : Burning risk is high especially for small children who are not aware of
danger. Door of oven, inner parts and steam exits are hot during usage. They can
exposed to burning or boiling. So it required to keep small children from oven in
appropriate distance. Bigger children can use oven under watch.
Attention: Burning Danger. Heating elements, oven and accesories are very hot
during usage. So please always use kitchen cloths or heat resist gloves during
holding trays and be careful on usage of trays for remove burn risk.
-Before using the appliance for the first time, remove any protective means,
wash the oven shelves and accessories in hot soapy water, to remove their
protective coating of oil, even so, when you first the oven or grill you may notice a
unpleasent smell and some smoke.
- Switch off the electricity supply before replacing the oven light bulb (if fitted).
During Use;
- Do not use this appliance if it is in contact with water. Do not attempt to use the
appliance with wet hands.
- Ensure the control knobs are in the ‘OFF’ position when not in use.
- Do not store flammable materials such as oven gloves, tea towels etc. in the
drawer.
- When cooking heavy items, eg; turkeys, do not pull the oven shelf out with the
item is still on the shelf. There might be a risk of tipping.
- Never put items directly on the base of the oven or cover the oven base with foil
as this can cause the base element to overheat.
- Never use the appliance for heating a room.
- Reachable parts of oven can be very hot when grate uses. Please keep small
children away. Please do not touch heating elements inside oven.
- Outer surfaces of oven can be hot during making grill or ordinary working of
appliance.
- Use oven gloves when removing hot food utensils from the oven or grill. The
oven /grill and utensils will be very hot when in use.
- Do not put any hot items into the drawer. Utensils used during cooking should
only be put into the drawer when cold.
- The oven door must always close properly. Keep the door seal areas clean.
- Pressing on open cover of oven with heavy matters can cause damage on cover
hinges. So please do not sit or load heavy matters on open cover of oven.
- Do not use aluminium foil to cover the grill pan, or put items wrapped in foil
under the grill as this creates a fire hazard. The high reflectivity can also damage
the elements.
- Do not use the oven with the door inner glass panel removed.
- Do not use the drop down door as a step to reach above cabinets
- After using oven please wipe vapour drops with a cloth that can be formed on
oven cover by high temperature.
- Do not block the oven vent in anyway, as this creates a fire hazard.
- When opening the appliance door, take care to avoid skin contact with any
steam that may escape from the oven.
- Perishable food, plastic items and aerosols may be affected by heat and should
not be stored above or around the appliance.
Service :
- Connection cables of appliances near oven can be damaged and shortcutted if
they contacted with hot parts of oven. Thats why, cables of other appliances must
be in enough safety distance to oven. When power cord damaged plese contact
with closest authorised service to fix new one.
- Operations and repairs on appliance that done unmethodically causes possibility
of electric shock and shortcuts. Please keep away from this kind of operations
which can destroy your appliance and cause danger of getting injured.
- This appliance should only be repaired or serviced by an authorised Service
Engineer and only genuine approved spare parts should be used.
SECTION 3 INSTALLATION of BUILT-IN OVEN
�nstallation must be done by an authorised technician. Below instructions
will guide an authorised technician to install Built-in oven according to law and
standarts to be in force.
Instructions :
- Dimensions and material of Cabin or cupboard that built-in oven will install in
must be suitable and endurable for heat increases.
- In a right installation operation, it is required to prevent any contact with
electrical parts or isolated parts due to work aim.
Isolation materials or parts that used for isolation must affix strongly to prevent
taking out by any tool.
- It is not recommend you to install your appliance near refrigator or deepfrost.
Otherwise performance of these appliances effected badly because of heat
spreaded..
-If a cooker installed on your oven, electrical cables of cooker and oven must
be seperated due to safety and to make dismantling easy if it requires.
-Install your appliance in a position that lets you to reach feeding cable.
-Do not place feeding cable close or contacted to hot surfaces. Do not tighten
the cable to oven door.
Measures of Built-in oven and board of oven are at Figure.3 & 4
Installed Built-in Oven pictures are at Figure.5 & 6
Fi
g
ure.3 Oven Measures Fi
g
ure.4 Board Measures
Fi
g
ure.6
Fi
g
ure.5
-5-
SECTION 2 IMPORTANT SAFETY NOTICES
This Built-in electrical oven is manufactured for using preparation of
home meals. Please do not use for other purposes.
Installation
- This appliance must be installed by qualified personnel, according to
manufacturer’s instructions and to the relevant Safety Standards.
- This appliance is heavy. Take care when moving it.
- Remove all packaging, protective films and oils From the appliance before us
for the first time.
- Ensure that the electrical supply complies with The type stated on the ratin
plate.
- Do not attempt to modify the appliance in any way.
- Usage voltage of your oven is 230 Volt - 50 Hz.
Warning:
Measures of Built-in oven and board of oven are at Figure.3 & 4
Installed Built-in Oven pictures are at Figure.5 & 6
Fi
g
ure.6
Fi
g
ure.5
- Before using your product please take out packing materials on oven. Do not
forget to take out cartoons on sides of trays and wire grate and strafor that stick on
front panel. Packing material can cause a danger for children.
Attention : Burning risk is high especially for small children who are not aware of
danger. Door of oven, inner parts and steam exits are hot during usage. They can
exposed to burning or boiling. So it required to keep small children from oven in
appropriate distance. Bigger children can use oven under watch.
Attention: Burning Danger. Heating elements, oven and accesories are very hot
during usage. So please always use kitchen cloths or heat resist gloves during
holding trays and be careful on usage of trays for remove burn risk.
-Before using the appliance for the first time, remove any protective means,
wash the oven shelves and accessories in hot soapy water, to remove their
protective coating of oil, even so, when you first the oven or grill you may notice a
unpleasent smell and some smoke.
- Switch off the electricity supply before replacing the oven light bulb (if fitted).
During Use;
- Do not use this appliance if it is in contact with water. Do not attempt to use the
appliance with wet hands.
- Ensure the control knobs are in the ‘OFF’ position when not in use.
- Do not store flammable materials such as oven gloves, tea towels etc. in the
drawer.
- When cooking heavy items, eg; turkeys, do not pull the oven shelf out with the
item is still on the shelf. There might be a risk of tipping.
- Never put items directly on the base of the oven or cover the oven base with foil
as this can cause the base element to overheat.
- Never use the appliance for heating a room.
- Reachable parts of oven can be very hot when grate uses. Please keep small
children away. Please do not touch heating elements inside oven.
- Outer surfaces of oven can be hot during making grill or ordinary working of
appliance.
- Use oven gloves when removing hot food utensils from the oven or grill. The
oven /grill and utensils will be very hot when in use.
- Do not put any hot items into the drawer. Utensils used during cooking should
only be put into the drawer when cold.
- The oven door must always close properly. Keep the door seal areas clean.
- Pressing on open cover of oven with heavy matters can cause damage on cover
hinges. So please do not sit or load heavy matters on open cover of oven.
- Do not use aluminium foil to cover the grill pan, or put items wrapped in foil
under the grill as this creates a fire hazard. The high reflectivity can also damage
the elements.
- Do not use the oven with the door inner glass panel removed.
- Do not use the drop down door as a step to reach above cabinets
- After using oven please wipe vapour drops with a cloth that can be formed on
oven cover by high temperature.
- Do not block the oven vent in anyway, as this creates a fire hazard.
- When opening the appliance door, take care to avoid skin contact with any
steam that may escape from the oven.
- Perishable food, plastic items and aerosols may be affected by heat and should
not be stored above or around the appliance.
Service :
- Connection cables of appliances near oven can be damaged and shortcutted if
they contacted with hot parts of oven. Thats why, cables of other appliances must
be in enough safety distance to oven. When power cord damaged plese contact
with closest authorised service to fix new one.
- Operations and repairs on appliance that done unmethodically causes possibility
of electric shock and shortcuts. Please keep away from this kind of operations
which can destroy your appliance and cause danger of getting injured.
- This appliance should only be repaired or serviced by an authorised Service
Engineer and only genuine approved spare parts should be used.
SECTION 3 INSTALLATION of BUILT-IN OVEN
�nstallation must be done by an authorised technician. Below instructions
will guide an authorised technician to install Built-in oven according to law and
standarts to be in force.
Instructions :
- Dimensions and material of Cabin or cupboard that built-in oven will install in
must be suitable and endurable for heat increases.
- In a right installation operation, it is required to prevent any contact with
electrical parts or isolated parts due to work aim.
Isolation materials or parts that used for isolation must affix strongly to prevent
taking out by any tool.
- It is not recommend you to install your appliance near refrigator or deepfrost.
Otherwise performance of these appliances effected badly because of heat
spreaded..
-If a cooker installed on your oven, electrical cables of cooker and oven must
be seperated due to safety and to make dismantling easy if it requires.
-Install your appliance in a position that lets you to reach feeding cable.
-Do not place feeding cable close or contacted to hot surfaces. Do not tighten
the cable to oven door.
Fi
g
ure.3 Oven Measures Fi
g
ure.4 Board Measures
-5-
- When opening the appliance door, take care to avoid skin contact with any
steam that may escape from the oven.
- Perishable food, plastic items and aerosols may be affected by heat and should
not be stored above or around the appliance.
Service :
- Connection cables of appliances near oven can be damaged and shortcutted if
they contacted with hot parts of oven. Thats why, cables of other appliances
be in enough safety distance to oven. When power cord damaged plese contact
with closest authorised service to fix new one.
- Operations and repairs on appliance that done unmethodically causes possi
of electric shock and shortcuts. Please keep away from this kind of operations
which can destroy your appliance and cause danger of getting injured.
- This appliance should only be repaired or serviced by an authorised Service
Engineer and only genuine approved spare parts should be used.
SECTION 3 INSTALLATION of BUILT-IN OVEN
�nstallation must be done by an authorised technician. Below instructions
will guide an authorised technician to install Built-in oven according to law
standarts to be in force.
Instructions :
- Dimensions and material of Cabin or cupboard that built-in oven will install in
must be suitable and endurable for heat increases.
- In a right installation operation, it is required to prevent any contact with
electrical parts or isolated parts due to work aim.
Isolation materials or parts that used for isolation must affix strongly to prevent
taking out by any tool.
- It is not recommend you to install your appliance near refrigator or deepfrost.
Otherwise performance of these appliances effected badly because of heat
spreaded..
-If a cooker installed on your oven, electrical cables of cooker and oven must
be seperated due to safety and to make dismantling easy if it requires.
-Install your appliance in a position that lets you to reach feeding cable.
-Do not place feeding cable close or contacted to hot surfaces. Do not tighten
the cable to oven door.
Measures of Built-in oven and board of oven are at Figure.3 & 4
Installed Built-in Oven pictures are at Figure.5 & 6
Fi
g
ure.6
Fi
g
ure.5
SECTION 4 INTRODUCTION of CONTROL PANEL
You can find control buttons in Figure.5 With these control buttons
power of each heating element can be adjustable. Buttons can turn
clockwise or opposite to clockwise directions. Please bring the control
button to required cooking position and do not forget big numbers on button
print means high heat outlet. For first cooking, it recommended to use
highest cooking position.
Instructions :
6-
- When opening the appliance door, take care to avoid skin contact with any
steam that may escape from the oven.
- Perishable food, plastic items and aerosols may be affected by heat and should
not be stored above or around the appliance.
Service :
- Connection cables of appliances near oven can be damaged and shortcutted if
they contacted with hot parts of oven. Thats why, cables of other appliances
be in enough safety distance to oven. When power cord damaged plese contact
with closest authorised service to fix new one.
- Operations and repairs on appliance that done unmethodically causes possi
of electric shock and shortcuts. Please keep away from this kind of operations
which can destroy your appliance and cause danger of getting injured.
- This appliance should only be repaired or serviced by an authorised Service
Engineer and only genuine approved spare parts should be used.
SECTION 3 INSTALLATION of BUILT-IN OVEN
�nstallation must be done by an authorised technician. Below instructions
will guide an authorised technician to install Built-in oven according to law
standarts to be in force.
Instructions :
- Dimensions and material of Cabin or cupboard that built-in oven will install in
must be suitable and endurable for heat increases.
- In a right installation operation, it is required to prevent any contact with
electrical parts or isolated parts due to work aim.
Isolation materials or parts that used for isolation must affix strongly to prevent
taking out by any tool.
- It is not recommend you to install your appliance near refrigator or deepfrost.
Otherwise performance of these appliances effected badly because of heat
spreaded..
-If a cooker installed on your oven, electrical cables of cooker and oven must
be seperated due to safety and to make dismantling easy if it requires.
-Install your appliance in a position that lets you to reach feeding cable.
-Do not place feeding cable close or contacted to hot surfaces. Do not tighten
the cable to oven door.
Measures of Built-in oven and board of oven are at Figure.3 & 4
Installed Built-in Oven pictures are at Figure.5 & 6
Fi
g
ure.6
Fi
g
ure.5
SECTION 4 INTRODUCTION of CONTROL PANEL
You can find control buttons in Figure.5 With these control buttons
power of each heating element can be adjustable. Buttons can turn
clockwise or opposite to clockwise directions. Please bring the control
button to required cooking position and do not forget big numbers on button
print means high heat outlet. For first cooking, it recommended to use
highest cooking position.
Instructions :
6-
-7-
LEVEL FUNCTION DESCRIPTION
O Close Oven is not working
Oven Lamp
Double Grill
Outer Heating Element and Grill Heating
Element works together.Recommends to use
for big and powerfull grill.
Oven Lamp
Grill Heating Element
Oven Lamp and Grill heater works.
Recommend to use for frying.Thermostat must
be at maximum position.
Oven Lamp
Top&Bottom Heating
Elements
Hot air comes from up and down heats the tray
from both side. Top and bottom sides of meals
cooked equally.
Oven Lamp
Grill Heating Element
Turbo Fan
Oven Lamp, Grill heater and Turbo Fan work
together. Recommend to use for frying.
Thermostat must be at maximum position.
Oven Lamp
Double Grill
Turbo Fan
Oven Lamp, Double Grill and Turbo Fan work
together. Recommend to use for frying.
Thermostat must be at maximum position.
Oven Lamp
Turbo Heating Element
Turbo Fan
Oven Lamp, Turbo Fan and Turbo Heating
Element work.Recommend to use fast cooking.
Oven Lamp
Turbo Heating Element
Turbo Fan, Bottom
Heating Element
Oven Lamp, turbo heating element,
turbo fan and bottom
heating element work together.
Recommed to use for pizza.
Oven Lamp
Turbo Fan
Only Oven Lamp and Turbo Fan work.
Recommend to use for defrosting.
Bottom
Heating Element
Bottom heating element,
Recommed to use cake and bread.
Top
Heating Element
Top Heating Element for keeping cooked food
warm or gently reheating.
Oven Lamp
Top&Bottom Heating
Elements
Turbo Fan
Hot air comes from up and down heats the tray
from both side. Top and bottom sides of meals
cooked equally with Turbo Fan.
OVEN FUNCTIONS:
SECTION 4 INTRODUCTION of CONTROL PANEL
You can find control buttons in Figure.5 With these control buttons
power of each heating element can be adjustable. Buttons can turn
clockwise or opposite to clockwise directions. Please bring the control
button to required cooking position and do not forget big numbers on button
print means high heat outlet. For first cooking, it recommended to use
highest cooking position.
1 Thermostat
2 Timer
3 Selections
SECTION 5 USAGE of OVEN
Control Switches of Oven
Indicator lamp will be on together with thermostat switch. When the heat
inside the oven reaches the set value, thermostat cuts the circuit and the
lamp is off. When the heat is below set value, thermostat is on again and
indicator lamp is lit.
Usage of Oven
During initial operation of your oven, a smell arising from insulation materials and
heating elements will be generated. To avoid it, operate your oven at 250 C for 45
minutes without putting any trays before use.
1. The meals that can be cooked
2. Positions of trays
3. Thermostat positions
4. Recommended cooking times are given in cooking table.
5. Turn the “oven heating control” switch clockwise to adjust cooking time for the
meal you desire to cook, refer to cooking table.
6. Before cooking, pre-heat the oven for 10 minutes. The front cover of the oven
should be open. Put the dish in the oven after pre-heating.
-7-
LEVEL FUNCTION DESCRIPTION
O Close Oven is not working
Oven Lamp
Double Grill
Outer Heating Element and Grill Heating
Element works together.Recommends to use
for big and powerfull grill.
Oven Lamp
Grill Heating Element
Oven Lamp and Grill heater works.
Recommend to use for frying.Thermostat must
be at maximum position.
Oven Lamp
Top&Bottom Heating
Elements
Hot air comes from up and down heats the tray
from both side. Top and bottom sides of meals
cooked equally.
Oven Lamp
Grill Heating Element
Turbo Fan
Oven Lamp, Grill heater and Turbo Fan work
together. Recommend to use for frying.
Thermostat must be at maximum position.
Oven Lamp
Double Grill
Turbo Fan
Oven Lamp, Double Grill and Turbo Fan work
together. Recommend to use for frying.
Thermostat must be at maximum position.
Oven Lamp
Turbo Heating Element
Turbo Fan
Oven Lamp, Turbo Fan and Turbo Heating
Element work.Recommend to use fast cooking.
Oven Lamp
Turbo Heating Element
Turbo Fan, Bottom
Heating Element
Oven Lamp, turbo heating element,
turbo fan and bottom
heating element work together.
Recommed to use for pizza.
Oven Lamp
Turbo Fan
Only Oven Lamp and Turbo Fan work.
Recommend to use for defrosting.
Bottom
Heating Element
Bottom heating element,
Recommed to use cake and bread.
Top
Heating Element
Top Heating Element for keeping cooked food
warm or gently reheating.
Oven Lamp
Top&Bottom Heating
Elements
Turbo Fan
Hot air comes from up and down heats the tray
from both side. Top and bottom sides of meals
cooked equally with Turbo Fan.
OVEN FUNCTIONS:
SECTION 4 INTRODUCTION of CONTROL PANEL
You can find control buttons in Figure.5 With these control buttons
power of each heating element can be adjustable. Buttons can turn
clockwise or opposite to clockwise directions. Please bring the control
button to required cooking position and do not forget big numbers on button
print means high heat outlet. For first cooking, it recommended to use
highest cooking position.
1 Thermostat
2 Timer
3 Selections
SECTION 5 USAGE of OVEN
Control Switches of Oven
Indicator lamp will be on together with thermostat switch. When the heat
inside the oven reaches the set value, thermostat cuts the circuit and the
lamp is off. When the heat is below set value, thermostat is on again and
indicator lamp is lit.
Usage of Oven
During initial operation of your oven, a smell arising from insulation materials and
heating elements will be generated. To avoid it, operate your oven at 250 C for 45
minutes without putting any trays before use.
1. The meals that can be cooked
2. Positions of trays
3. Thermostat positions
4. Recommended cooking times are given in cooking table.
5. Turn the “oven heating control” switch clockwise to adjust cooking time for the
meal you desire to cook, refer to cooking table.
6. Before cooking, pre-heat the oven for 10 minutes. The front cover of the oven
should be open. Put the dish in the oven after pre-heating.
Traditional Oven Cooking
By turning the thermostat knob, a desired temperature of 50CC to 2503C
can be selected. The yellow light will go off when the oven has reached the desired
temperature. It is recommended that the oven is pre-heated before introducing the
food.
Central Grill Element
By turning the thermostat knob, a desired temperature of 50°C to
250°C can be selected, keeping the door closed.
Recommended use: for grilling smaller items of food.
Double Grill Element
By turning the thermostat knob, a desired temperature of 50°C to 250°C
can be selected, keeping the door half-open or closed. In the latter case the
use of the grill deflector is not necessary. Recommended use: for grilling larger
area of food.
Semi Forced air Convection
The thermostat has to be set at the desired temperature between 50°C and
2505C. The fan and the grill clement allow a fast and deep cooking for particular
food. It is recommended that the oven be pre-heated for a few minutes.
Upper + lower heater + Fan
Termostat , signal lamp,fan, upper heater and lower heater start
working.
Turbo Fan + Rezistans
The fan and the circular element come on. The heat is diffused bv the fan
to give an even temperature in the oven by adjusting the thermostat, a desired
temperature of 50'C to 250°C can be obtained. It is not necessary to pre-heat the
oven before introducing the food.
Bottom Elemet + Fan.
Termostat signal lamps ,fan and lower heater start working.
Oven Lamp
SECTION 6 Grill Function of Oven
Turn the oven temperature button to position
� We advise you to use grill wire that put into the tray when you are grilling.
By the way leaped or flowed oil can not make your oven dirty.
� If you use grill wire that placed on shelf, put a tray into one of lower shelves
for collecting oils. For cleaning it easily, please put some water in it.
� Cover at half closeed position do preheating for 5-10 minutes.
� Please oil the grill to prevent your grilling food from sticking on grill.
ATTENTION :
For preventing command buttons on control panel from heating, please set
its sheet centered between front cover and oven body without have blank. Our
company is not responsible for damage made by not using this sheet.
GRILL
Shelf Time (min.)
Lamb Meat 4-5 15
Lamb
Chops 4-5 15
Calf Chops 4-5 15-25
Sheep
Chops 4-5 15-25
button for 5 seconds ( till you see ‘pr 1’ on the
screen).
� Press the button to decrease buzzer volume
� Press the button to increase buzzer volume (default is already
high)
� Press the button to record the last heard tone.
CREATING YOUR BACKLIGHT COLOUR
� Press the button for 5 seconds (till display indicates 'r xx' ,
where xx is a number between 00 and 100 indicating the red
content)
� Press the or button to change the red colour content on
the display between 00 and 100
� You may press button to switch to green and blue and make
the same colour content adjustment via or as in red.
Traditional Oven Cooking
By turning the thermostat knob, a desired temperature of 50CC to 2503C
can be selected. The yellow light will go off when the oven has reached the desired
temperature. It is recommended that the oven is pre-heated before introducing the
food.
Central Grill Element
By turning the thermostat knob, a desired temperature of 50°C to
250°C can be selected, keeping the door closed.
Recommended use: for grilling smaller items of food.
Double Grill Element
By turning the thermostat knob, a desired temperature of 50°C to 250°C
can be selected, keeping the door half-open or closed. In the latter case the
use of the grill deflector is not necessary. Recommended use: for grilling larger
area of food.
Semi Forced air Convection
The thermostat has to be set at the desired temperature between 50°C and
2505C. The fan and the grill clement allow a fast and deep cooking for particular
food. It is recommended that the oven be pre-heated for a few minutes.
Upper + lower heater + Fan
Termostat , signal lamp,fan, upper heater and lower heater start
working.
Turbo Fan + Rezistans
The fan and the circular element come on. The heat is diffused bv the fan
to give an even temperature in the oven by adjusting the thermostat, a desired
temperature of 50'C to 250°C can be obtained. It is not necessary to pre-heat the
button for 5 seconds ( till you see ‘pr 1’ on the
screen).
� Press the button to decrease buzzer volume
� Press the button to increase buzzer volume (default is already
high)
� Press the button to record the last heard tone.
CREATING YOUR BACKLIGHT COLOUR
� Press the button for 5 seconds (till display indicates 'r xx' ,
where xx is a number between 00 and 100 indicating the red
content)
� Press the or button to change the red colour content on
the display between 00 and 100
� You may press button to switch to green and blue and make
the same colour content adjustment via or as in red.
oven before introducing the food.
Bottom Elemet + Fan.
Termostat signal lamps ,fan and lower heater start working.
Oven Lamp
-8-
COOKING TABLE
NOTE: The values given in cooking table are the values obtained in our
laboratories. You can obtain various results to satisfying your tastes
depending on your cooking and use habits. Cooking times depend on
quantity of ingredients. Using cake forms gives better results for making
cakes.
SECTION 6 Grill Function of Oven
Turn the oven temperature button to position
� We advise you to use grill wire that put into the tray when you are grilling.
By the way leaped or flowed oil can not make your oven dirty.
� If you use grill wire that placed on shelf, put a tray into one of lower shelves
for collecting oils. For cleaning it easily, please put some water in it.
� Cover at half closeed position do preheating for 5-10 minutes.
� Please oil the grill to prevent your grilling food from sticking on grill.
ATTENTION :
For preventing command buttons on control panel from heating, please set
its sheet centered between front cover and oven body without have blank. Our
company is not responsible for damage made by not using this sheet.
GRILL
Shelf Time (min.)
Lamb Meat 4-5 15
Lamb
Chops 4-5 15
Calf Chops 4-5 15-25
Sheep
Chops 4-5 15-25
-8-
COOKING TABLE
NOTE: The values given in cooking table are the values obtained in our
laboratories. You can obtain various results to satisfying your tastes
depending on your cooking and use habits. Cooking times depend on
quantity of ingredients. Using cake forms gives better results for making
cakes.
4. After entering this value the clock will switch off the power and
the alarm will beep. HAND icon will start flashing. You can silence
the alarm beep by pressing any button. Current time of the day,
sign and a flashing sign will appear on the display.
If you wish to restart the oven press the button and then the
oven will start working manually.
6. Cooking will end by bringing the oven control button to off (0)
position.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
You have finished the semi automatic cooking. Your food is ready
for servicing.
AUTOMATIC PROGRAMMING
With this programme, cooking duration and the time to finish
cooking are programmed beforehand. Current time of the day
must be set before starting programming.
1) The time is 18:30 2) You want the food
to be ready at 20:45.
You can set the finish
time by pressing the
and buttons.
3) You can set the
cooking time by
pressing the and
buttons. Let’s
enter the cooking time
as 1:00 hour.
After 1:00 hour power will be switched off and the oven stops.
Alarm starts beeping.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
7. When the 1 hour cooking finishes, alarm starts beeping at the
preset level. Alarm can be stopped by pressing any button.
8. sign is shown.
9. If you wish to restart the oven press the button. The oven
starts working manually.
NOTE: If your press the button during semi automatic and full
automatic programming the programmes in the memory will be
cancelled and your oven operates manually.
10. Cooking will end by bringing the oven control button to off (0)
position.
You have finished the semi automatic cooking. Your food is ready
for servicing.
Your oven is in standby mode and the display shows
as the current time of the day and standby signs. The
oven will not work. It starts working at 19:45 and the icon is
displayed with the current time. The oven works for 1:00 hour and
stops at 20:45. The sign appears with the end hour.
1. Prepare the food that you want to cook and put it in the oven.
Bring the oven selector switch and the thermostat button to the
position shown in the cooking table.
2. Press the button. Enter the end time of cooking by pressing
the button In 5 seconds. Let’s enter the end time as 20:45.
While entering the time, auto sign and the flashing sign
appear with the time. After 5 seconds sign and the word
“auto” appear on the display. The oven is in operation.
3. Enter the cooking time by pressing first the button and then
the (-) button. The display is automatically set for 2:15 hours
cooking time. Let’s say that we want to set the cooking time as
1:00 hour. We can change the time as 1:00 instead of 2:15 hours
by pressing the (-) button. In 5 seconds after making the setting,
the current time of the day (18:30), the word “auto” and the
sign appear. The oven will switch to the standby mode and it will
not work.
4. When the oven is in standby mode, you can view the end time
of cooking by pressing the button and the cooking time by
pressing the button.
5. The oven starts working after 1 hour and 15 minutes, that is at
19:45. While the oven is in operation the 19:45 auto is
displayed. The oven works for 1 hour as the entered time is 1
hour.
NOTE: The cooking time entered should be less than the
difference between the current time of the day and the end time
of cooking. Otherwise the oven will not switch to standby mode
and it will work until the end of cooking time.
6. By pressing the button, the remaining time can be viewed.
After 5 seconds the display switches to the clock mode and the
current time of the day is displayed. The end of cooking time will
appear on the display by pressing the button.
Changing the cooking time after programming.
To change the end time of cooking:
The new value is entered by pressing
the button and using the (+) and (-)
keys.
To change cooking time:
The cooking time is displayed while the
button is pressed. Press the “+” or
“-“ keys to set the new cooking time..
4. After entering this value the clock will switch off the power and
the alarm will beep. HAND icon will start flashing. You can silence
the alarm beep by pressing any button. Current time of the day,
sign and a flashing sign will appear on the display.
If you wish to restart the oven press the button and then the
oven will start working manually.
6. Cooking will end by bringing the oven control button to off (0)
position.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
You have finished the semi automatic cooking. Your food is ready
for servicing.
AUTOMATIC PROGRAMMING
With this programme, cooking duration and the time to finish
cooking are programmed beforehand. Current time of the day
must be set before starting programming.
1) The time is 18:30 2) You want the food
to be ready at 20:45.
You can set the finish
time by pressing the
and buttons.
3) You can set the
cooking time by
pressing the and
buttons. Let’s
enter the cooking time
as 1:00 hour.
After 1:00 hour power will be switched off and the oven stops.
Alarm starts beeping.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
7. When the 1 hour cooking finishes, alarm starts beeping at the
preset level. Alarm can be stopped by pressing any button.
8. sign is shown.
9. If you wish to restart the oven press the button. The oven
starts working manually.
NOTE: If your press the button during semi automatic and full
automatic programming the programmes in the memory will be
cancelled and your oven operates manually.
10. Cooking will end by bringing the oven control button to off (0)
position.
You have finished the semi automatic cooking. Your food is ready
for servicing.
Your oven is in standby mode and the display shows
as the current time of the day and standby signs. The
oven will not work. It starts working at 19:45 and the icon is
displayed with the current time. The oven works for 1:00 hour and
stops at 20:45. The sign appears with the end hour.
1. Prepare the food that you want to cook and put it in the oven.
Bring the oven selector switch and the thermostat button to the
position shown in the cooking table.
2. Press the button. Enter the end time of cooking by pressing
the button In 5 seconds. Let’s enter the end time as 20:45.
While entering the time, auto sign and the flashing sign
appear with the time. After 5 seconds sign and the word
“auto” appear on the display. The oven is in operation.
3. Enter the cooking time by pressing first the button and then
the (-) button. The display is automatically set for 2:15 hours
cooking time. Let’s say that we want to set the cooking time as
1:00 hour. We can change the time as 1:00 instead of 2:15 hours
by pressing the (-) button. In 5 seconds after making the setting,
the current time of the day (18:30), the word “auto” and the
sign appear. The oven will switch to the standby mode and it will
not work.
4. When the oven is in standby mode, you can view the end time
of cooking by pressing the button and the cooking time by
pressing the button.
5. The oven starts working after 1 hour and 15 minutes, that is at
19:45. While the oven is in operation the 19:45 auto is
displayed. The oven works for 1 hour as the entered time is 1
hour.
NOTE: The cooking time entered should be less than the
difference between the current time of the day and the end time
of cooking. Otherwise the oven will not switch to standby mode
and it will work until the end of cooking time.
6. By pressing the button, the remaining time can be viewed.
After 5 seconds the display switches to the clock mode and the
current time of the day is displayed. The end of cooking time will
appear on the display by pressing the button.
You can change the cooking time and the end of cooking time
while your oven is in operation.
To change the end time of cooking:
The new value is entered by pressing
the button and using the (+) and (-)
keys.
To change cooking time:
The cooking time is displayed while the
button is pressed. Press the “+” or
“-“ keys to set the new cooking time..
-9-
4. After entering this value the clock will switch off the power and
the alarm will beep. HAND icon will start flashing. You can silence
the alarm beep by pressing any button. Current time of the day,
sign and a flashing sign will appear on the display.
If you wish to restart the oven press the button and then the
oven will start working manually.
6. Cooking will end by bringing the oven control button to off (0)
position.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
You have finished the semi automatic cooking. Your food is ready
for servicing.
AUTOMATIC PROGRAMMING
With this programme, cooking duration and the time to finish
cooking are programmed beforehand. Current time of the day
must be set before starting programming.
1) The time is 18:30 2) You want the food
to be ready at 20:45.
You can set the finish
time by pressing the
and buttons.
3) You can set the
cooking time by
pressing the and
buttons. Let’s
enter the cooking time
as 1:00 hour.
4. After entering this value the clock will switch off the power and
the alarm will beep. HAND icon will start flashing. You can silence
the alarm beep by pressing any button. Current time of the day,
sign and a flashing sign will appear on the display.
If you wish to restart the oven press the button and then the
oven will start working manually.
6. Cooking will end by bringing the oven control button to off (0)
position.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
You have finished the semi automatic cooking. Your food is ready
for servicing.
AUTOMATIC PROGRAMMING
With this programme, cooking duration and the time to finish
cooking are programmed beforehand. Current time of the day
must be set before starting programming.
1) The time is 18:30 2) You want the food
to be ready at 20:45.
You can set the finish
time by pressing the
and buttons.
3) You can set the
cooking time by
pressing the and
buttons. Let’s
enter the cooking time
as 1:00 hour.
After 1:00 hour power will be switched off and the oven stops.
Alarm starts beeping.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
7. When the 1 hour cooking finishes, alarm starts beeping at the
preset level. Alarm can be stopped by pressing any button.
8. sign is shown.
9. If you wish to restart the oven press the button. The oven
starts working manually.
NOTE: If your press the button during semi automatic and full
automatic programming the programmes in the memory will be
cancelled and your oven operates manually.
10. Cooking will end by bringing the oven control button to off (0)
position.
You have finished the semi automatic cooking. Your food is ready
for servicing.
Your oven is in standby mode and the display shows
as the current time of the day and standby signs. The
oven will not work. It starts working at 19:45 and the icon is
displayed with the current time. The oven works for 1:00 hour and
stops at 20:45. The sign appears with the end hour.
1. Prepare the food that you want to cook and put it in the oven.
Bring the oven selector switch and the thermostat button to the
position shown in the cooking table.
2. Press the button. Enter the end time of cooking by pressing
the button In 5 seconds. Let’s enter the end time as 20:45.
While entering the time, auto sign and the flashing sign
appear with the time. After 5 seconds sign and the word
“auto” appear on the display. The oven is in operation.
3. Enter the cooking time by pressing first the button and then
the (-) button. The display is automatically set for 2:15 hours
cooking time. Let’s say that we want to set the cooking time as
1:00 hour. We can change the time as 1:00 instead of 2:15 hours
by pressing the (-) button. In 5 seconds after making the setting,
the current time of the day (18:30), the word “auto” and the
sign appear. The oven will switch to the standby mode and it will
not work.
4. When the oven is in standby mode, you can view the end time
of cooking by pressing the button and the cooking time by
pressing the button.
5. The oven starts working after 1 hour and 15 minutes, that is at
19:45. While the oven is in operation the 19:45 auto is
displayed. The oven works for 1 hour as the entered time is 1
hour.
NOTE: The cooking time entered should be less than the
difference between the current time of the day and the end time
of cooking. Otherwise the oven will not switch to standby mode
and it will work until the end of cooking time.
6. By pressing the button, the remaining time can be viewed.
After 5 seconds the display switches to the clock mode and the
current time of the day is displayed. The end of cooking time will
appear on the display by pressing the button.
Changing the cooking time after programming.
You can change the cooking time and the end of cooking time
while your oven is in operation.
To change the end time of cooking:
The new value is entered by pressing
the button and using the (+) and (-)
keys.
4. After entering this value the clock will switch off the power and
the alarm will beep. HAND icon will start flashing. You can silence
the alarm beep by pressing any button. Current time of the day,
sign and a flashing sign will appear on the display.
If you wish to restart the oven press the button and then the
oven will start working manually.
6. Cooking will end by bringing the oven control button to off (0)
position.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
You have finished the semi automatic cooking. Your food is ready
for servicing.
AUTOMATIC PROGRAMMING
With this programme, cooking duration and the time to finish
cooking are programmed beforehand. Current time of the day
must be set before starting programming.
1) The time is 18:30 2) You want the food
to be ready at 20:45.
You can set the finish
time by pressing the
and buttons.
3) You can set the
cooking time by
pressing the and
buttons. Let’s
enter the cooking time
as 1:00 hour.
After 1:00 hour power will be switched off and the oven stops.
Alarm starts beeping.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
7. When the 1 hour cooking finishes, alarm starts beeping at the
preset level. Alarm can be stopped by pressing any button.
8. sign is shown.
9. If you wish to restart the oven press the button. The oven
starts working manually.
NOTE: If your press the button during semi automatic and full
automatic programming the programmes in the memory will be
cancelled and your oven operates manually.
10. Cooking will end by bringing the oven control button to off (0)
position.
You have finished the semi automatic cooking. Your food is ready
for servicing.
Your oven is in standby mode and the display shows
as the current time of the day and standby signs. The
oven will not work. It starts working at 19:45 and the icon is
displayed with the current time. The oven works for 1:00 hour and
stops at 20:45. The sign appears with the end hour.
1. Prepare the food that you want to cook and put it in the oven.
Bring the oven selector switch and the thermostat button to the
position shown in the cooking table.
2. Press the button. Enter the end time of cooking by pressing
the button In 5 seconds. Let’s enter the end time as 20:45.
While entering the time, auto sign and the flashing sign
appear with the time. After 5 seconds sign and the word
“auto” appear on the display. The oven is in operation.
3. Enter the cooking time by pressing first the button and then
the (-) button. The display is automatically set for 2:15 hours
cooking time. Let’s say that we want to set the cooking time as
1:00 hour. We can change the time as 1:00 instead of 2:15 hours
by pressing the (-) button. In 5 seconds after making the setting,
the current time of the day (18:30), the word “auto” and the
sign appear. The oven will switch to the standby mode and it will
not work.
4. When the oven is in standby mode, you can view the end time
of cooking by pressing the button and the cooking time by
pressing the button.
5. The oven starts working after 1 hour and 15 minutes, that is at
19:45. While the oven is in operation the 19:45 auto is
displayed. The oven works for 1 hour as the entered time is 1
hour.
NOTE: The cooking time entered should be less than the
difference between the current time of the day and the end time
of cooking. Otherwise the oven will not switch to standby mode
and it will work until the end of cooking time.
6. By pressing the button, the remaining time can be viewed.
After 5 seconds the display switches to the clock mode and the
current time of the day is displayed. The end of cooking time will
appear on the display by pressing the button.
Changing the cooking time after programming.
To change the end time of cooking:
The new value is entered by pressing
the button and using the (+) and (-)
keys.
To change cooking time:
The cooking time is displayed while the
button is pressed. Press the “+” or
“-“ keys to set the new cooking time..
4. After entering this value the clock will switch off the power and
the alarm will beep. HAND icon will start flashing. You can silence
the alarm beep by pressing any button. Current time of the day,
sign and a flashing sign will appear on the display.
If you wish to restart the oven press the button and then the
oven will start working manually.
6. Cooking will end by bringing the oven control button to off (0)
position.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
You have finished the semi automatic cooking. Your food is ready
for servicing.
AUTOMATIC PROGRAMMING
With this programme, cooking duration and the time to finish
cooking are programmed beforehand. Current time of the day
must be set before starting programming.
1) The time is 18:30 2) You want the food
to be ready at 20:45.
You can set the finish
time by pressing the
and buttons.
3) You can set the
cooking time by
pressing the and
buttons. Let’s
enter the cooking time
as 1:00 hour.
After 1:00 hour power will be switched off and the oven stops.
Alarm starts beeping.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
7. When the 1 hour cooking finishes, alarm starts beeping at the
preset level. Alarm can be stopped by pressing any button.
8. sign is shown.
9. If you wish to restart the oven press the button. The oven
starts working manually.
NOTE: If your press the button during semi automatic and full
automatic programming the programmes in the memory will be
cancelled and your oven operates manually.
10. Cooking will end by bringing the oven control button to off (0)
position.
You have finished the semi automatic cooking. Your food is ready
for servicing.
Your oven is in standby mode and the display shows
as the current time of the day and standby signs. The
oven will not work. It starts working at 19:45 and the icon is
displayed with the current time. The oven works for 1:00 hour and
stops at 20:45. The sign appears with the end hour.
1. Prepare the food that you want to cook and put it in the oven.
Bring the oven selector switch and the thermostat button to the
position shown in the cooking table.
2. Press the button. Enter the end time of cooking by pressing
the button In 5 seconds. Let’s enter the end time as 20:45.
While entering the time, auto sign and the flashing sign
appear with the time. After 5 seconds sign and the word
“auto” appear on the display. The oven is in operation.
3. Enter the cooking time by pressing first the button and then
the (-) button. The display is automatically set for 2:15 hours
cooking time. Let’s say that we want to set the cooking time as
1:00 hour. We can change the time as 1:00 instead of 2:15 hours
by pressing the (-) button. In 5 seconds after making the setting,
the current time of the day (18:30), the word “auto” and the
sign appear. The oven will switch to the standby mode and it will
not work.
4. When the oven is in standby mode, you can view the end time
of cooking by pressing the button and the cooking time by
pressing the button.
5. The oven starts working after 1 hour and 15 minutes, that is at
19:45. While the oven is in operation the 19:45 auto is
displayed. The oven works for 1 hour as the entered time is 1
hour.
NOTE: The cooking time entered should be less than the
difference between the current time of the day and the end time
of cooking. Otherwise the oven will not switch to standby mode
and it will work until the end of cooking time.
6. By pressing the button, the remaining time can be viewed.
After 5 seconds the display switches to the clock mode and the
current time of the day is displayed. The end of cooking time will
appear on the display by pressing the button.
You can change the cooking time and the end of cooking time
while your oven is in operation.
To change the end time of cooking:
The new value is entered by pressing
the button and using the (+) and (-)
keys.
To change cooking time:
The cooking time is displayed while the
button is pressed. Press the “+” or
“-“ keys to set the new cooking time..
To change cooking time:
The cooking time is displayed while the
button is pressed. Press the “+” or
“-“ keys to set the new cooking time..
4. After entering this value the clock will switch off the power and
the alarm will beep. HAND icon will start flashing. You can silence
the alarm beep by pressing any button. Current time of the day,
sign and a flashing sign will appear on the display.
If you wish to restart the oven press the button and then the
oven will start working manually.
6. Cooking will end by bringing the oven control button to off (0)
position.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
You have finished the semi automatic cooking. Your food is ready
for servicing.
AUTOMATIC PROGRAMMING
With this programme, cooking duration and the time to finish
cooking are programmed beforehand. Current time of the day
must be set before starting programming.
1) The time is 18:30 2) You want the food
to be ready at 20:45.
You can set the finish
time by pressing the
and buttons.
3) You can set the
cooking time by
pressing the and
buttons. Let’s
enter the cooking time
as 1:00 hour.
4. After entering this value the clock will switch off the power and
the alarm will beep. HAND icon will start flashing. You can silence
the alarm beep by pressing any button. Current time of the day,
sign and a flashing sign will appear on the display.
If you wish to restart the oven press the button and then the
oven will start working manually.
6. Cooking will end by bringing the oven control button to off (0)
position.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
You have finished the semi automatic cooking. Your food is ready
for servicing.
AUTOMATIC PROGRAMMING
With this programme, cooking duration and the time to finish
cooking are programmed beforehand. Current time of the day
must be set before starting programming.
1) The time is 18:30 2) You want the food
to be ready at 20:45.
You can set the finish
time by pressing the
and buttons.
3) You can set the
cooking time by
pressing the and
buttons. Let’s
enter the cooking time
as 1:00 hour.
After 1:00 hour power will be switched off and the oven stops.
Alarm starts beeping.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
7. When the 1 hour cooking finishes, alarm starts beeping at the
preset level. Alarm can be stopped by pressing any button.
8. sign is shown.
9. If you wish to restart the oven press the button. The oven
starts working manually.
NOTE: If your press the button during semi automatic and full
automatic programming the programmes in the memory will be
cancelled and your oven operates manually.
10. Cooking will end by bringing the oven control button to off (0)
position.
You have finished the semi automatic cooking. Your food is ready
for servicing.
Your oven is in standby mode and the display shows
as the current time of the day and standby signs. The
oven will not work. It starts working at 19:45 and the icon is
displayed with the current time. The oven works for 1:00 hour and
stops at 20:45. The sign appears with the end hour.
1. Prepare the food that you want to cook and put it in the oven.
Bring the oven selector switch and the thermostat button to the
position shown in the cooking table.
2. Press the button. Enter the end time of cooking by pressing
the button In 5 seconds. Let’s enter the end time as 20:45.
While entering the time, auto sign and the flashing sign
appear with the time. After 5 seconds sign and the word
“auto” appear on the display. The oven is in operation.
3. Enter the cooking time by pressing first the button and then
the (-) button. The display is automatically set for 2:15 hours
cooking time. Let’s say that we want to set the cooking time as
1:00 hour. We can change the time as 1:00 instead of 2:15 hours
by pressing the (-) button. In 5 seconds after making the setting,
the current time of the day (18:30), the word “auto” and the
sign appear. The oven will switch to the standby mode and it will
not work.
4. When the oven is in standby mode, you can view the end time
of cooking by pressing the button and the cooking time by
pressing the button.
5. The oven starts working after 1 hour and 15 minutes, that is at
19:45. While the oven is in operation the 19:45 auto is
displayed. The oven works for 1 hour as the entered time is 1
hour.
NOTE: The cooking time entered should be less than the
difference between the current time of the day and the end time
of cooking. Otherwise the oven will not switch to standby mode
and it will work until the end of cooking time.
6. By pressing the button, the remaining time can be viewed.
After 5 seconds the display switches to the clock mode and the
current time of the day is displayed. The end of cooking time will
appear on the display by pressing the button.
Changing the cooking time after programming.
You can change the cooking time and the end of cooking time
while your oven is in operation.
To change the end time of cooking:
The new value is entered by pressing
the button and using the (+) and (-)
keys.
4. After entering this value the clock will switch off the power and
the alarm will beep. HAND icon will start flashing. You can silence
the alarm beep by pressing any button. Current time of the day,
sign and a flashing sign will appear on the display.
If you wish to restart the oven press the button and then the
oven will start working manually.
6. Cooking will end by bringing the oven control button to off (0)
position.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
You have finished the semi automatic cooking. Your food is ready
for servicing.
AUTOMATIC PROGRAMMING
With this programme, cooking duration and the time to finish
cooking are programmed beforehand. Current time of the day
must be set before starting programming.
1) The time is 18:30 2) You want the food
to be ready at 20:45.
You can set the finish
time by pressing the
and buttons.
3) You can set the
cooking time by
pressing the and
buttons. Let’s
enter the cooking time
as 1:00 hour.
After 1:00 hour power will be switched off and the oven stops.
Alarm starts beeping.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
7. When the 1 hour cooking finishes, alarm starts beeping at the
preset level. Alarm can be stopped by pressing any button.
8. sign is shown.
9. If you wish to restart the oven press the button. The oven
starts working manually.
NOTE: If your press the button during semi automatic and full
automatic programming the programmes in the memory will be
cancelled and your oven operates manually.
10. Cooking will end by bringing the oven control button to off (0)
position.
You have finished the semi automatic cooking. Your food is ready
for servicing.
Your oven is in standby mode and the display shows
as the current time of the day and standby signs. The
oven will not work. It starts working at 19:45 and the icon is
displayed with the current time. The oven works for 1:00 hour and
stops at 20:45. The sign appears with the end hour.
1. Prepare the food that you want to cook and put it in the oven.
Bring the oven selector switch and the thermostat button to the
position shown in the cooking table.
2. Press the button. Enter the end time of cooking by pressing
the button In 5 seconds. Let’s enter the end time as 20:45.
While entering the time, auto sign and the flashing sign
appear with the time. After 5 seconds sign and the word
“auto” appear on the display. The oven is in operation.
3. Enter the cooking time by pressing first the button and then
the (-) button. The display is automatically set for 2:15 hours
cooking time. Let’s say that we want to set the cooking time as
1:00 hour. We can change the time as 1:00 instead of 2:15 hours
by pressing the (-) button. In 5 seconds after making the setting,
the current time of the day (18:30), the word “auto” and the
sign appear. The oven will switch to the standby mode and it will
not work.
4. When the oven is in standby mode, you can view the end time
of cooking by pressing the button and the cooking time by
pressing the button.
5. The oven starts working after 1 hour and 15 minutes, that is at
19:45. While the oven is in operation the 19:45 auto is
displayed. The oven works for 1 hour as the entered time is 1
hour.
NOTE: The cooking time entered should be less than the
difference between the current time of the day and the end time
of cooking. Otherwise the oven will not switch to standby mode
and it will work until the end of cooking time.
6. By pressing the button, the remaining time can be viewed.
After 5 seconds the display switches to the clock mode and the
current time of the day is displayed. The end of cooking time will
appear on the display by pressing the button.
Changing the cooking time after programming.
To change the end time of cooking:
The new value is entered by pressing
the button and using the (+) and (-)
keys.
To change cooking time:
The cooking time is displayed while the
button is pressed. Press the “+” or
“-“ keys to set the new cooking time..
4. After entering this value the clock will switch off the power and
the alarm will beep. HAND icon will start flashing. You can silence
the alarm beep by pressing any button. Current time of the day,
sign and a flashing sign will appear on the display.
If you wish to restart the oven press the button and then the
oven will start working manually.
6. Cooking will end by bringing the oven control button to off (0)
position.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
You have finished the semi automatic cooking. Your food is ready
for servicing.
AUTOMATIC PROGRAMMING
With this programme, cooking duration and the time to finish
cooking are programmed beforehand. Current time of the day
must be set before starting programming.
1) The time is 18:30 2) You want the food
to be ready at 20:45.
You can set the finish
time by pressing the
and buttons.
3) You can set the
cooking time by
pressing the and
buttons. Let’s
enter the cooking time
as 1:00 hour.
After 1:00 hour power will be switched off and the oven stops.
Alarm starts beeping.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
7. When the 1 hour cooking finishes, alarm starts beeping at the
preset level. Alarm can be stopped by pressing any button.
8. sign is shown.
9. If you wish to restart the oven press the button. The oven
starts working manually.
NOTE: If your press the button during semi automatic and full
automatic programming the programmes in the memory will be
cancelled and your oven operates manually.
10. Cooking will end by bringing the oven control button to off (0)
position.
You have finished the semi automatic cooking. Your food is ready
for servicing.
Your oven is in standby mode and the display shows
as the current time of the day and standby signs. The
oven will not work. It starts working at 19:45 and the icon is
displayed with the current time. The oven works for 1:00 hour and
stops at 20:45. The sign appears with the end hour.
1. Prepare the food that you want to cook and put it in the oven.
Bring the oven selector switch and the thermostat button to the
position shown in the cooking table.
2. Press the button. Enter the end time of cooking by pressing
the button In 5 seconds. Let’s enter the end time as 20:45.
While entering the time, auto sign and the flashing sign
appear with the time. After 5 seconds sign and the word
“auto” appear on the display. The oven is in operation.
3. Enter the cooking time by pressing first the button and then
the (-) button. The display is automatically set for 2:15 hours
cooking time. Let’s say that we want to set the cooking time as
1:00 hour. We can change the time as 1:00 instead of 2:15 hours
by pressing the (-) button. In 5 seconds after making the setting,
the current time of the day (18:30), the word “auto” and the
sign appear. The oven will switch to the standby mode and it will
not work.
4. When the oven is in standby mode, you can view the end time
of cooking by pressing the button and the cooking time by
pressing the button.
5. The oven starts working after 1 hour and 15 minutes, that is at
19:45. While the oven is in operation the 19:45 auto is
displayed. The oven works for 1 hour as the entered time is 1
hour.
NOTE: The cooking time entered should be less than the
difference between the current time of the day and the end time
of cooking. Otherwise the oven will not switch to standby mode
and it will work until the end of cooking time.
6. By pressing the button, the remaining time can be viewed.
After 5 seconds the display switches to the clock mode and the
current time of the day is displayed. The end of cooking time will
appear on the display by pressing the button.
You can change the cooking time and the end of cooking time
while your oven is in operation.
To change the end time of cooking:
The new value is entered by pressing
the button and using the (+) and (-)
keys.
To change cooking time:
The cooking time is displayed while the
button is pressed. Press the “+” or
“-“ keys to set the new cooking time..
To change cooking time:
The cooking time is displayed while the
button is pressed. Press the “+” or
“-“ keys to set the new cooking time..
SECTION 7 ADJUSTMENT of TIMER
4. After entering this value the clock will switch off the power and
the alarm will beep. HAND icon will start flashing. You can silence
the alarm beep by pressing any button. Current time of the day,
sign and a flashing sign will appear on the display.
If you wish to restart the oven press the button and then the
oven will start working manually.
6. Cooking will end by bringing the oven control button to off (0)
position.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
You have finished the semi automatic cooking. Your food is ready
for servicing.
AUTOMATIC PROGRAMMING
With this programme, cooking duration and the time to finish
cooking are programmed beforehand. Current time of the day
must be set before starting programming.
1) The time is 18:30 2) You want the food
to be ready at 20:45.
You can set the finish
time by pressing the
and buttons.
3) You can set the
cooking time by
pressing the and
buttons. Let’s
enter the cooking time
as 1:00 hour.
After 1:00 hour power will be switched off and the oven stops.
Alarm starts beeping.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
7. When the 1 hour cooking finishes, alarm starts beeping at the
preset level. Alarm can be stopped by pressing any button.
8. sign is shown.
9. If you wish to restart the oven press the button. The oven
starts working manually.
NOTE: If your press the button during semi automatic and full
automatic programming the programmes in the memory will be
cancelled and your oven operates manually.
10. Cooking will end by bringing the oven control button to off (0)
position.
You have finished the semi automatic cooking. Your food is ready
for servicing.
Your oven is in standby mode and the display shows
as the current time of the day and standby signs. The
oven will not work. It starts working at 19:45 and the icon is
displayed with the current time. The oven works for 1:00 hour and
stops at 20:45. The sign appears with the end hour.
1. Prepare the food that you want to cook and put it in the oven.
Bring the oven selector switch and the thermostat button to the
position shown in the cooking table.
2. Press the button. Enter the end time of cooking by pressing
the button In 5 seconds. Let’s enter the end time as 20:45.
While entering the time, auto sign and the flashing sign
appear with the time. After 5 seconds sign and the word
“auto” appear on the display. The oven is in operation.
3. Enter the cooking time by pressing first the button and then
the (-) button. The display is automatically set for 2:15 hours
cooking time. Let’s say that we want to set the cooking time as
1:00 hour. We can change the time as 1:00 instead of 2:15 hours
by pressing the (-) button. In 5 seconds after making the setting,
the current time of the day (18:30), the word “auto” and the
sign appear. The oven will switch to the standby mode and it will
not work.
4. When the oven is in standby mode, you can view the end time
of cooking by pressing the button and the cooking time by
pressing the button.
5. The oven starts working after 1 hour and 15 minutes, that is at
19:45. While the oven is in operation the 19:45 auto is
displayed. The oven works for 1 hour as the entered time is 1
hour.
NOTE: The cooking time entered should be less than the
difference between the current time of the day and the end time
of cooking. Otherwise the oven will not switch to standby mode
and it will work until the end of cooking time.
6. By pressing the button, the remaining time can be viewed.
After 5 seconds the display switches to the clock mode and the
current time of the day is displayed. The end of cooking time will
appear on the display by pressing the button.
Changing the cooking time after programming.
To change the end time of cooking:
The new value is entered by pressing
the button and using the (+) and (-)
keys.
To change cooking time:
The cooking time is displayed while the
button is pressed. Press the “+” or
“-“ keys to set the new cooking time..
4. After entering this value the clock will switch off the power and
the alarm will beep. HAND icon will start flashing. You can silence
the alarm beep by pressing any button. Current time of the day,
sign and a flashing sign will appear on the display.
If you wish to restart the oven press the button and then the
oven will start working manually.
6. Cooking will end by bringing the oven control button to off (0)
position.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
You have finished the semi automatic cooking. Your food is ready
for servicing.
AUTOMATIC PROGRAMMING
With this programme, cooking duration and the time to finish
cooking are programmed beforehand. Current time of the day
must be set before starting programming.
1) The time is 18:30 2) You want the food
to be ready at 20:45.
You can set the finish
time by pressing the
and buttons.
3) You can set the
cooking time by
pressing the and
buttons. Let’s
enter the cooking time
as 1:00 hour.
After 1:00 hour power will be switched off and the oven stops.
Alarm starts beeping.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
7. When the 1 hour cooking finishes, alarm starts beeping at the
preset level. Alarm can be stopped by pressing any button.
8. sign is shown.
9. If you wish to restart the oven press the button. The oven
starts working manually.
NOTE: If your press the button during semi automatic and full
automatic programming the programmes in the memory will be
cancelled and your oven operates manually.
10. Cooking will end by bringing the oven control button to off (0)
position.
You have finished the semi automatic cooking. Your food is ready
for servicing.
Your oven is in standby mode and the display shows
as the current time of the day and standby signs. The
oven will not work. It starts working at 19:45 and the icon is
displayed with the current time. The oven works for 1:00 hour and
stops at 20:45. The sign appears with the end hour.
1. Prepare the food that you want to cook and put it in the oven.
Bring the oven selector switch and the thermostat button to the
position shown in the cooking table.
2. Press the button. Enter the end time of cooking by pressing
the button In 5 seconds. Let’s enter the end time as 20:45.
While entering the time, auto sign and the flashing sign
appear with the time. After 5 seconds sign and the word
“auto” appear on the display. The oven is in operation.
3. Enter the cooking time by pressing first the button and then
the (-) button. The display is automatically set for 2:15 hours
cooking time. Let’s say that we want to set the cooking time as
1:00 hour. We can change the time as 1:00 instead of 2:15 hours
by pressing the (-) button. In 5 seconds after making the setting,
the current time of the day (18:30), the word “auto” and the
sign appear. The oven will switch to the standby mode and it will
not work.
4. When the oven is in standby mode, you can view the end time
of cooking by pressing the button and the cooking time by
pressing the button.
5. The oven starts working after 1 hour and 15 minutes, that is at
19:45. While the oven is in operation the 19:45 auto is
displayed. The oven works for 1 hour as the entered time is 1
hour.
NOTE: The cooking time entered should be less than the
difference between the current time of the day and the end time
of cooking. Otherwise the oven will not switch to standby mode
and it will work until the end of cooking time.
6. By pressing the button, the remaining time can be viewed.
After 5 seconds the display switches to the clock mode and the
current time of the day is displayed. The end of cooking time will
appear on the display by pressing the button.
You can change the cooking time and the end of cooking time
while your oven is in operation.
To change the end time of cooking:
The new value is entered by pressing
the button and using the (+) and (-)
keys.
To change cooking time:
The cooking time is displayed while the
button is pressed. Press the “+” or
“-“ keys to set the new cooking time..
USER INTERFACE
(Red with orange bar) (Blue) (Red)
1 2 3 4 5 6 7 8
Auto repeat on and , temperature e if kept pressed:
- when editing Times and Temperatures: 1 step every 500ms during the first 1 second, then slew mode with 1
step every 200ms.
- When cycling through Programs and , one step every 500ms, without slew action.
KEY FUNCTION
1
Increments temperatures values
2
Decrements temperatures values
3
Turns on the oven
3+
O--n Children Lock if pressed > 4 seconds ON/OFF
4
Decrements values (temperatures, timings, programs)
5
Increments values (temperatures, timings, programs)
6
Timing Edit menu (Minute minder, duration, end of cook)
7
Increments programs values
8
Decrements programs values
32,5
79,2
78,4
2.1. Sequence associated to key
At every key-press the menu sequence is browsed as per the following:
OVEN OFF
Impulse OVEN ON
Impulse Clock Display after pressing 2
sec User Action
1 “ 0:00” as default
value, otherwise
the actual value
as default value, otherwise the
actual value
Minute Minder editing
2 Cooking Pot Icon
[ dur ]
as default value, otherwise the
actual value
Cooking Duration editing
3 Cooking Pot Icon
[ End ]
Time Of Day as default value,
otherwise the actual value)
End of Cook Time
editing
Pressure >
4 sec. Actual Time Of Day
flashing
[ hour ]
Time Of Day Setting
2.2. Clock Display
The 4-digit display shows Timings, Durations, and Messages. It integrates also 3 icons representing the Timings
operating states.
2.2.1. Cooking Pot Icon
It is lit-up to indicate that a cooking function is operating, even in manual mode. Note: the cooking functions “Light”
and “Defrost” are not considered to be cooking functions; therefore the icon is off in these modes.
It flashes to represent the end of a timed cooking
It is off while in delayed cook
2.2.2. Auto Icon
Normally it is off.
If lit-up, it indicates that a timed cooking is selected (i.e. the oven is not operating in manual mode), the associated
meaning completes with the Cooking Pot Icon.
It flashes together with the Cooking Pot Icon to represent the end of a timed cooking.
While in DURATION setting, it is lit-up in order to distinguish the value from a minute minder.
2.2.3. Bell Icon
Normally it is off.
If lit-up, it indicates that a minute minder has been selected.
It flashes when the minute minder is elapsed.
While in MINUTE MINDER setting, it is lit-up in order to distinguish the value from a cooking duration.
4. After entering this value the clock will switch off the power and
the alarm will beep. HAND icon will start flashing. You can silence
the alarm beep by pressing any button. Current time of the day,
sign and a flashing sign will appear on the display.
If you wish to restart the oven press the button and then the
oven will start working manually.
6. Cooking will end by bringing the oven control button to off (0)
position.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
You have finished the semi automatic cooking. Your food is ready
for servicing.
AUTOMATIC PROGRAMMING
With this programme, cooking duration and the time to finish
cooking are programmed beforehand. Current time of the day
must be set before starting programming.
1) The time is 18:30 2) You want the food
to be ready at 20:45.
You can set the finish
time by pressing the
and buttons.
3) You can set the
cooking time by
pressing the and
buttons. Let’s
enter the cooking time
as 1:00 hour.
After 1:00 hour power will be switched off and the oven stops.
Alarm starts beeping.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
7. When the 1 hour cooking finishes, alarm starts beeping at the
preset level. Alarm can be stopped by pressing any button.
8. sign is shown.
9. If you wish to restart the oven press the button. The oven
starts working manually.
NOTE: If your press the button during semi automatic and full
automatic programming the programmes in the memory will be
cancelled and your oven operates manually.
10. Cooking will end by bringing the oven control button to off (0)
position.
You have finished the semi automatic cooking. Your food is ready
for servicing.
Your oven is in standby mode and the display shows
as the current time of the day and standby signs. The
oven will not work. It starts working at 19:45 and the icon is
displayed with the current time. The oven works for 1:00 hour and
stops at 20:45. The sign appears with the end hour.
1. Prepare the food that you want to cook and put it in the oven.
Bring the oven selector switch and the thermostat button to the
position shown in the cooking table.
2. Press the button. Enter the end time of cooking by pressing
the button In 5 seconds. Let’s enter the end time as 20:45.
While entering the time, auto sign and the flashing sign
appear with the time. After 5 seconds sign and the word
“auto” appear on the display. The oven is in operation.
3. Enter the cooking time by pressing first the button and then
the (-) button. The display is automatically set for 2:15 hours
cooking time. Let’s say that we want to set the cooking time as
1:00 hour. We can change the time as 1:00 instead of 2:15 hours
by pressing the (-) button. In 5 seconds after making the setting,
the current time of the day (18:30), the word “auto” and the
sign appear. The oven will switch to the standby mode and it will
not work.
4. When the oven is in standby mode, you can view the end time
of cooking by pressing the button and the cooking time by
pressing the button.
5. The oven starts working after 1 hour and 15 minutes, that is at
19:45. While the oven is in operation the 19:45 auto is
displayed. The oven works for 1 hour as the entered time is 1
hour.
NOTE: The cooking time entered should be less than the
difference between the current time of the day and the end time
of cooking. Otherwise the oven will not switch to standby mode
and it will work until the end of cooking time.
6. By pressing the button, the remaining time can be viewed.
After 5 seconds the display switches to the clock mode and the
current time of the day is displayed. The end of cooking time will
appear on the display by pressing the button.
Changing the cooking time after programming.
4. After entering this value the clock will switch off the power and
the alarm will beep. HAND icon will start flashing. You can silence
the alarm beep by pressing any button. Current time of the day,
sign and a flashing sign will appear on the display.
If you wish to restart the oven press the button and then the
oven will start working manually.
6. Cooking will end by bringing the oven control button to off (0)
position.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
You have finished the semi automatic cooking. Your food is ready
for servicing.
AUTOMATIC PROGRAMMING
With this programme, cooking duration and the time to finish
cooking are programmed beforehand. Current time of the day
must be set before starting programming.
1) The time is 18:30 2) You want the food
to be ready at 20:45.
You can set the finish
time by pressing the
and buttons.
3) You can set the
cooking time by
pressing the and
buttons. Let’s
enter the cooking time
as 1:00 hour.
After 1:00 hour power will be switched off and the oven stops.
Alarm starts beeping.
The display to be shown when the
cooking starts
The display to be shown when the
cooking finishes
When the cooking programme is completed, audible warning is on and will remain
on for 7 minutes if not switched off before.
7. When the 1 hour cooking finishes, alarm starts beeping at the
preset level. Alarm can be stopped by pressing any button.
8. sign is shown.
9. If you wish to restart the oven press the button. The oven
starts working manually.
NOTE: If your press the button during semi automatic and full
automatic programming the programmes in the memory will be
cancelled and your oven operates manually.
10. Cooking will end by bringing the oven control button to off (0)
position.
You have finished the semi automatic cooking. Your food is ready
for servicing.
Your oven is in standby mode and the display shows
as the current time of the day and standby signs. The
oven will not work. It starts working at 19:45 and the icon is
displayed with the current time. The oven works for 1:00 hour and
stops at 20:45. The sign appears with the end hour.
1. Prepare the food that you want to cook and put it in the oven.
Bring the oven selector switch and the thermostat button to the
position shown in the cooking table.
2. Press the button. Enter the end time of cooking by pressing
the button In 5 seconds. Let’s enter the end time as 20:45.
While entering the time, auto sign and the flashing sign
appear with the time. After 5 seconds sign and the word
“auto” appear on the display. The oven is in operation.
3. Enter the cooking time by pressing first the button and then
the (-) button. The display is automatically set for 2:15 hours
cooking time. Let’s say that we want to set the cooking time as
1:00 hour. We can change the time as 1:00 instead of 2:15 hours
by pressing the (-) button. In 5 seconds after making the setting,
the current time of the day (18:30), the word “auto” and the
sign appear. The oven will switch to the standby mode and it will
not work.
4. When the oven is in standby mode, you can view the end time
of cooking by pressing the button and the cooking time by
pressing the button.
5. The oven starts working after 1 hour and 15 minutes, that is at
19:45. While the oven is in operation the 19:45 auto is
displayed. The oven works for 1 hour as the entered time is 1
hour.
NOTE: The cooking time entered should be less than the
difference between the current time of the day and the end time
of cooking. Otherwise the oven will not switch to standby mode
and it will work until the end of cooking time.
6. By pressing the button, the remaining time can be viewed.
After 5 seconds the display switches to the clock mode and the
current time of the day is displayed. The end of cooking time will
appear on the display by pressing the button.
You can change the cooking time and the end of cooking time
while your oven is in operation.
To change the end time of cooking:
The new value is entered by pressing
the button and using the (+) and (-)
keys.
To change cooking time:
The cooking time is displayed while the
button is pressed. Press the “+” or
“-“ keys to set the new cooking time..
-9-
SECTION 7 ADJUSTMENT of TIMER
USER INTERFACE
(Red with orange bar) (Blue) (Red)
1 2 3 4 5 6 7 8
Auto repeat on and , temperature e if kept pressed:
- when editing Times and Temperatures: 1 step every 500ms during the first 1 second, then slew mode with 1
step every 200ms.
- When cycling through Programs and , one step every 500ms, without slew action.
KEY FUNCTION
1
Increments temperatures values
2
Decrements temperatures values
3
Turns on the oven
3+
O--n Children Lock if pressed > 4 seconds ON/OFF
4
Decrements values (temperatures, timings, programs)
5
Increments values (temperatures, timings, programs)
6
Timing Edit menu (Minute minder, duration, end of cook)
7
Increments programs values
8
Decrements programs values
32,5
79,2
78,4
2.1. Sequence associated to key
At every key-press the menu sequence is browsed as per the following:
OVEN OFF
Impulse OVEN ON
Impulse Clock Display after pressing 2
sec User Action
1 “ 0:00” as default
value, otherwise
the actual value
as default value, otherwise the
actual value
Minute Minder editing
2 Cooking Pot Icon
[ dur ]
as default value, otherwise the
actual value
Cooking Duration editing
3 Cooking Pot Icon
[ End ]
Time Of Day as default value,
otherwise the actual value)
End of Cook Time
editing
Pressure >
4 sec. Actual Time Of Day
flashing
[ hour ]
Time Of Day Setting
2.2. Clock Display
The 4-digit display shows Timings, Durations, and Messages. It integrates also 3 icons representing the Timings
operating states.
2.2.1. Cooking Pot Icon
It is lit-up to indicate that a cooking function is operating, even in manual mode. Note: the cooking functions “Light”
and “Defrost” are not considered to be cooking functions; therefore the icon is off in these modes.
It flashes to represent the end of a timed cooking
It is off while in delayed cook
2.2.2. Auto Icon
Normally it is off.
If lit-up, it indicates that a timed cooking is selected (i.e. the oven is not operating in manual mode), the associated
meaning completes with the Cooking Pot Icon.
It flashes together with the Cooking Pot Icon to represent the end of a timed cooking.
While in DURATION setting, it is lit-up in order to distinguish the value from a minute minder.
2.2.3. Bell Icon
Normally it is off.
If lit-up, it indicates that a minute minder has been selected.
It flashes when the minute minder is elapsed.
While in MINUTE MINDER setting, it is lit-up in order to distinguish the value from a cooking duration.
-10-
2.3. Cooking Modes Display
It visually represents the active oven elements.
The “Oven Cavity / Light” square symbol:
- Represents the oven actively turned on, it is normally lit-up.
- It is turned off while in delayed cooking mode, to represent the “wait for a start” condition.
oIn the light position it is always on since there are no other indications
The “Fan” Symbol:
- For Fan assisted cooking functions, it appears as a “turning fan”: an animation made up of by the 4 wings,
each one lit-up in a turning sequence
- In Delayed cooking mode (waiting for a delayed start) the 4 wings are all lit-up altogether: the fan is
selected, but it’s not actively operating.
2.4. Temperature Display
It shows the temperature setpoint and provides also some icons and a temperature bar-graph indication.
3. OPERATING INSTRUCTIONS
At first power-up, the display shows “00:00” the clock flashing, incrementing by 1 unit each minute.
The oven is inhibited, and the only two allowed operations are:
- Time of Day setting, by means of [+] / [-]
- Oven turn-on (the currently shown time of day is automatically accepted) by means of [On Off]
3.1. Time of Day Setting
If not already in Time of Day Setting, press and keep pressed the [Time] button for >4 seconds, then select the
value by means of [+] / [-]. The two keys operate on a per-minute basis, so that the hours are modified as a direct
consequence.
3.2. Oven Turn ON and OFF
To turn on the oven, press and release the [On Off] key. The Clock display shows “On “and after 2 seconds it
goes into Program_01 (LIGHT): the oven light and the Icon Display is turned on.
To turn off the oven, press and release the [On Off] key. The Clock display shows “Off “and after 2 seconds it goes
into Off mode.
In both cases, the effective reaction is handled with a short delay in order to allow the user to cancel any eventual
accidental selection simply by pressing again the [On Off] key.
After 1 minute in Light position, if the oven automatically turns off.
3.3. Minute Minder
The minute minder does not interact with the loads and is always available, whichever the operating state is.
Press and release the [Time] key 1 time, as indicated in 2.1. Correct the value by using [+] and [-], between the
minimum of 0h: 00m and a maximum of 180 minutes. The value is edited on a per-minute basis.
After 4 seconds since the last keyboard action, the proposed value is accepted, and the display reverts to the
previous operating mode.
The value is accepted also by pressing the [Time] key after the value has been edited.
When the Minute Minder elapses, an acoustic signal is emitted and the Bell Icon flashes. Press any key to stop the
signal and to turn off the Bell Icon. Note: In this case, the normal function associated to the pressed key is not
executed, as it’s only needed to stop the signalizing.
3.4. MANUAL COOKING
Turn on the oven and select a cooking mode by means of [Progr]: the oven proposes a default temperature which
can be adjusted. After a timeout window of 4 seconds, the oven starts cooking.
3.5. TIMED-DURATION COOKING
Turn on the oven and press [Time] 2 times, the clock display shows “ dur”.
Edit the value by means of [+] and [-] ranging from a minimum of 0h:00m and a maximum of 23h:59m.
After a timeout window of 4 seconds, the value is accepted. The value is edited on a per-minute basis.
Then select the cooking mode by [Progr] and the eventual temperature by [°C].
When the Duration is elapsed the oven reverts to End of Cook mode.
3.6. AUTOMATIC DELAYED COOKING
You can set the end of cooking time just after setting a time of cooking time.
Set the duration and press [Time] 1 times more, the clock display shows “ End”. Edit the value by means of [+] and
[-]. The allowed editing range is from the current Time of Day and TimeOfDay+23h59m.
After a timeout window of 4 seconds, the value is accepted and the oven reverts to Waiting for Delayed Start. It
turns off immediately, and it will turn on in the future for the specified duration until the End of Cook time is reached.
During this phase, the Icon Display shows the selected cooking function and the temperature display the selected
temperature. Both are further changeable.
The Preheat Bar graph is fully off to indicate that the oven is currently not heating.
The tangential blower operates as usual, while the light operates as described in Oven Light Handling.
3.7. END OF COOK MODE
The oven turns off the loads, and an acoustic signal is emitted. The Icon and Temperature displays are turned off;
the Clock display shows the Time of Day with both Auto and Cooking Pot Icons flashing.
Press any key except [OnOff] to unlock the oven: it will immediately revert to normal Manual Cooking Mode. The
[OnOff] key will definitively turn off the oven.
3.8. COOKING MODE SELECTION
The clock display will show the currently selected Program Number or “Pr01” if no program was ever selected. The
Icon display has the Oven Cavity border symbol flashing o indicate that the program is being edited. Choose the
desired program by means of [ ] and [ ], which will circularly browse the list between “On” and “Pr 12”.
After 4 seconds of timeout the selected program is accepted and becomes operative.
-10-
2.3. Cooking Modes Display
It visually represents the active oven elements.
The “Oven Cavity / Light” square symbol:
- Represents the oven actively turned on, it is normally lit-up.
- It is turned off while in delayed cooking mode, to represent the “wait for a start” condition.
oIn the light position it is always on since there are no other indications
The “Fan” Symbol:
- For Fan assisted cooking functions, it appears as a “turning fan”: an animation made up of by the 4 wings,
each one lit-up in a turning sequence
- In Delayed cooking mode (waiting for a delayed start) the 4 wings are all lit-up altogether: the fan is
selected, but it’s not actively operating.
2.4. Temperature Display
It shows the temperature setpoint and provides also some icons and a temperature bar-graph indication.
3. OPERATING INSTRUCTIONS
At first power-up, the display shows “00:00” the clock flashing, incrementing by 1 unit each minute.
The oven is inhibited, and the only two allowed operations are:
- Time of Day setting, by means of [+] / [-]
- Oven turn-on (the currently shown time of day is automatically accepted) by means of [On Off]
3.1. Time of Day Setting
If not already in Time of Day Setting, press and keep pressed the [Time] button for >4 seconds, then select the
value by means of [+] / [-]. The two keys operate on a per-minute basis, so that the hours are modified as a direct
consequence.
3.2. Oven Turn ON and OFF
To turn on the oven, press and release the [On Off] key. The Clock display shows “On “and after 2 seconds it
goes into Program_01 (LIGHT): the oven light and the Icon Display is turned on.
To turn off the oven, press and release the [On Off] key. The Clock display shows “Off “and after 2 seconds it goes
into Off mode.
In both cases, the effective reaction is handled with a short delay in order to allow the user to cancel any eventual
accidental selection simply by pressing again the [On Off] key.
After 1 minute in Light position, if the oven automatically turns off.
3.3. Minute Minder
The minute minder does not interact with the loads and is always available, whichever the operating state is.
Press and release the [Time] key 1 time, as indicated in 2.1. Correct the value by using [+] and [-], between the
minimum of 0h: 00m and a maximum of 180 minutes. The value is edited on a per-minute basis.
After 4 seconds since the last keyboard action, the proposed value is accepted, and the display reverts to the
previous operating mode.
The value is accepted also by pressing the [Time] key after the value has been edited.
When the Minute Minder elapses, an acoustic signal is emitted and the Bell Icon flashes. Press any key to stop the
signal and to turn off the Bell Icon. Note: In this case, the normal function associated to the pressed key is not
executed, as it’s only needed to stop the signalizing.
3.4. MANUAL COOKING
Turn on the oven and select a cooking mode by means of [Progr]: the oven proposes a default temperature which
can be adjusted. After a timeout window of 4 seconds, the oven starts cooking.
3.5. TIMED-DURATION COOKING
Turn on the oven and press [Time] 2 times, the clock display shows “ dur”.
Edit the value by means of [+] and [-] ranging from a minimum of 0h:00m and a maximum of 23h:59m.
After a timeout window of 4 seconds, the value is accepted. The value is edited on a per-minute basis.
Then select the cooking mode by [Progr] and the eventual temperature by [°C].
When the Duration is elapsed the oven reverts to End of Cook mode.
3.6. AUTOMATIC DELAYED COOKING
You can set the end of cooking time just after setting a time of cooking time.
Set the duration and press [Time] 1 times more, the clock display shows “ End”. Edit the value by means of [+] and
[-]. The allowed editing range is from the current Time of Day and TimeOfDay+23h59m.
After a timeout window of 4 seconds, the value is accepted and the oven reverts to Waiting for Delayed Start. It
turns off immediately, and it will turn on in the future for the specified duration until the End of Cook time is reached.
During this phase, the Icon Display shows the selected cooking function and the temperature display the selected
temperature. Both are further changeable.
The Preheat Bar graph is fully off to indicate that the oven is currently not heating.
The tangential blower operates as usual, while the light operates as described in Oven Light Handling.
3.7. END OF COOK MODE
The oven turns off the loads, and an acoustic signal is emitted. The Icon and Temperature displays are turned off;
the Clock display shows the Time of Day with both Auto and Cooking Pot Icons flashing.
Press any key except [OnOff] to unlock the oven: it will immediately revert to normal Manual Cooking Mode. The
[OnOff] key will definitively turn off the oven.
3.8. COOKING MODE SELECTION
The clock display will show the currently selected Program Number or “Pr01” if no program was ever selected. The
Icon display has the Oven Cavity border symbol flashing o indicate that the program is being edited. Choose the
desired program by means of [ ] and [ ], which will circularly browse the list between “On” and “Pr 12”.
After 4 seconds of timeout the selected program is accepted and becomes operative.
-11-
-11-
-12-
3.10. COOKING TEMPERATURE SELECTION
Press [+ Temp] or [-- Temp]: the temperature display flashes to represent the value being edited. Change the value
by means of [+ Temp] and [-- Temp] between the minimum and maximum in 5°C steps. After a timeout of 4
seconds the selected value is accepted and becomes operative.
3.11. OFF MODE AND RESIDUAL HEAT
When the oven is in Off mode, as well as at the Power-up, the preheat bar shows the residual heat in the oven.
i. If Probe > 200°C: 1°,2°,3°on; 4°flashing
ii. If 200 > Probe > 150°C: 1°,2°on; 3°flashing; 4°off
iii. If 150 > Probe > 100°C: 1°on, 2°flashing; 3 °,4°off
iv. If 100 > Probe > 50°C: 1°flashing ; 2°,3°,4° off
v. If 50 > Probe: 1°,2°,3°,4°off
Moreover, the Temperature display shows in a numerical way the residual heat in 10°C steps if it is >
50°C. The display turns off when it falls below 50°C.
3.12. CHILDREN LOCK
If the [On Off] key is pressed for > 3 seconds, the Children Lock is activated.
The Clock display shows "n--O" followed by "On", then it reverts to normal operating mode.
When the lock is activated the cooking mode and the temperature are not changeable, the eventual timed cooking
parameters can be reviewed but not changed.
To disable the Children Lock feature, press the [OnOff] key for > 3 seconds.
Note: if the oven is turned on, it is always possible to turn it off by pressing and releasing the [OnOff] key, but it can
not be turned on, even if the Children Lock is active.
3.13. OVEN CAVITY LIGHT
The oven light is on while the oven is heating up and for other 3 minutes after the preheat is reached. At this time it
turns off.
In “Waiting for Delayed Start” mode, the oven light is off.
Every time that the light turns off, it can be reactivated for 1 minute by pressing any key.
3.14. PREHEAT BAR-GRAPH
The bar shows the preheating status and it expresses how far away is the require setpoint compared to the actual
temperature.
The ratio k=Probe / Setpoint defines the bar: (note: k can be > 100%)
i. If k > 75%: 1°,2°,3°on; 4°flashing
ii. If 75% > k > 50%: 1°,2°on; 3°flashing; 4°of f
iii. If 50% > k > 25%: 1°on, 2°flashing; 3°,4°of f
iv. If 25% > k: 1°flashing; 2°,3°,4°off
At the end of preheat, it is always fully on: 1°,2°,3°,4°on
When a cooking in progress (after the preheat is reached), the temperature in the cavity can fall below the
regulation level: if it is more than 15°C lower, the bar progressively turns off following the same rule of the preheat.
3.15. TANGENTAL BLOWER HANDLING
3.15.1. Cooking Mode Selection
The blower turns on, no matter which is the cavity temperature, after 15 minutes the function is started, or even
before if the cavity Probe temperature is > 200°C
3.15.2. Cooking Mode Stopping (Off, stand-by)
The blower turns off, no matter which is the cavity temperature, after 25 minutes the oven turned off, or even before
if the cavity Probe temperature is < 110°C
3.15.3. Power Board Sensor
The Power Board is equipped with an environmental on-board temperature sensor. If this temperature is >80°C the
blower is turned on, independently from the above turning on/off logic, and in any operating state.
3.16. TIMED COOKING CANCELING
In order to cancel any eventual Duration or Timed Cooking setting, press the [OnOff] key while in editing one of
these two parameters: the oven reverts to Manual Cooking Mode.
Alternatively, push the Key #6 [ - ] for 4 seconds or more.
Alternatively, it’s possible to fully turn the oven off and on again.
3.17. MINUTE MINDER CANCELING
In order to cancel any eventual Minute Minder setting, press the [OnOff] key while in editing the Minute Minder
4. WIRING DIAGRAM
-12-
3.10. COOKING TEMPERATURE SELECTION
Press [+ Temp] or [-- Temp]: the temperature display flashes to represent the value being edited. Change the value
by means of [+ Temp] and [-- Temp] between the minimum and maximum in 5°C steps. After a timeout of 4
seconds the selected value is accepted and becomes operative.
3.11. OFF MODE AND RESIDUAL HEAT
When the oven is in Off mode, as well as at the Power-up, the preheat bar shows the residual heat in the oven.
i. If Probe > 200°C: 1°,2°,3°on; 4°flashing
ii. If 200 > Probe > 150°C: 1°,2°on; 3°flashing; 4°off
iii. If 150 > Probe > 100°C: 1°on, 2°flashing; 3 °,4°off
iv. If 100 > Probe > 50°C: 1°flashing ; 2°,3°,4° off
v. If 50 > Probe: 1°,2°,3°,4°off
Moreover, the Temperature display shows in a numerical way the residual heat in 10°C steps if it is >
50°C. The display turns off when it falls below 50°C.
3.12. CHILDREN LOCK
If the [On Off] key is pressed for > 3 seconds, the Children Lock is activated.
The Clock display shows "n--O" followed by "On", then it reverts to normal operating mode.
When the lock is activated the cooking mode and the temperature are not changeable, the eventual timed cooking
parameters can be reviewed but not changed.
To disable the Children Lock feature, press the [OnOff] key for > 3 seconds.
Note: if the oven is turned on, it is always possible to turn it off by pressing and releasing the [OnOff] key, but it can
not be turned on, even if the Children Lock is active.
3.13. OVEN CAVITY LIGHT
The oven light is on while the oven is heating up and for other 3 minutes after the preheat is reached. At this time it
turns off.
In “Waiting for Delayed Start” mode, the oven light is off.
Every time that the light turns off, it can be reactivated for 1 minute by pressing any key.
3.14. PREHEAT BAR-GRAPH
The bar shows the preheating status and it expresses how far away is the require setpoint compared to the actual
temperature.
The ratio k=Probe / Setpoint defines the bar: (note: k can be > 100%)
i. If k > 75%: 1°,2°,3°on; 4°flashing
ii. If 75% > k > 50%: 1°,2°on; 3°flashing; 4°of f
iii. If 50% > k > 25%: 1°on, 2°flashing; 3°,4°of f
iv. If 25% > k: 1°flashing; 2°,3°,4°off
At the end of preheat, it is always fully on: 1°,2°,3°,4°on
When a cooking in progress (after the preheat is reached), the temperature in the cavity can fall below the
regulation level: if it is more than 15°C lower, the bar progressively turns off following the same rule of the preheat.
3.15. TANGENTAL BLOWER HANDLING
3.15.1. Cooking Mode Selection
The blower turns on, no matter which is the cavity temperature, after 15 minutes the function is started, or even
before if the cavity Probe temperature is > 200°C
3.15.2. Cooking Mode Stopping (Off, stand-by)
The blower turns off, no matter which is the cavity temperature, after 25 minutes the oven turned off, or even before
if the cavity Probe temperature is < 110°C
3.15.3. Power Board Sensor
The Power Board is equipped with an environmental on-board temperature sensor. If this temperature is >80°C the
blower is turned on, independently from the above turning on/off logic, and in any operating state.
3.16. TIMED COOKING CANCELING
In order to cancel any eventual Duration or Timed Cooking setting, press the [OnOff] key while in editing one of
these two parameters: the oven reverts to Manual Cooking Mode.
Alternatively, push the Key #6 [ - ] for 4 seconds or more.
Alternatively, it’s possible to fully turn the oven off and on again.
3.17. MINUTE MINDER CANCELING
In order to cancel any eventual Minute Minder setting, press the [OnOff] key while in editing the Minute Minder
4. WIRING DIAGRAM
SECTION 8 MAINTENANCE & CLEANING
Cleaning your Oven
1. Before starting cleaning, pull the power-supply plug out of the socket. If
the oven is hot, wait for cooling off.
2. Do not use the agents scratching enamel or painted surfaces. Use
creams or liquid cleaning agents not containing hard agents.
3. The liquid spilling on the cooker may cause damage to enamel surfaces
when they burn. Promptly clean spilling liquids.
4. Do not use corrosive cleaning agents when cleaning control panel.
5. Never drip water on and touch the glass when the oven is hot.
6. Remove covers of the oven. Wash and rinse with soapy water.
Cleaning the Interior Part of Your Oven
� Pull the power-supply plug out of the socket before starting cleaning.
Remove trays and grill. Wipe the interior parts with soap soaked cloth.
Clean it with dampened cloth again and wipe dry.
� Do not use dry and powder cleaning agents. Clean the glass surfaces with
glass cleaning agents.
� Do not use hard brushes, steel wood or sharp instruments such as a knife
when cleaning the interior part of the oven.
� Remove the glass front lid by unscrewing the fixing parts by use of a
screwdriver, and remove the inside glass, clean and rinse it. After drying it
place the seal properly and re-install the glass
SECTION 8 MAINTENANCE & CLEANING
Cleaning your Oven
1. Before starting cleaning, pull the power-supply plug out of the socket. If
the oven is hot, wait for cooling off.
2. Do not use the agents scratching enamel or painted surfaces. Use
creams or liquid cleaning agents not containing hard agents.
3. The liquid spilling on the cooker may cause damage to enamel surfaces
when they burn. Promptly clean spilling liquids.
4. Do not use corrosive cleaning agents when cleaning control panel.
5. Never drip water on and touch the glass when the oven is hot.
6. Remove covers of the oven. Wash and rinse with soapy water.
Cleaning the Interior Part of Your Oven
� Pull the power-supply plug out of the socket before starting cleaning.
Remove trays and grill. Wipe the interior parts with soap soaked cloth.
Clean it with dampened cloth again and wipe dry.
� Do not use dry and powder cleaning agents. Clean the glass surfaces with
glass cleaning agents.
� Do not use hard brushes, steel wood or sharp instruments such as a knife
when cleaning the interior part of the oven.
� Remove the glass front lid by unscrewing the fixing parts by use of a
screwdriver, and remove the inside glass, clean and rinse it. After drying it
place the seal properly and re-install the glass
SECTION 8 MAINTENANCE & CLEANING
Cleaning your Oven
1. Before starting cleaning, pull the power-supply plug out of the socket. If
the oven is hot, wait for cooling off.
2. Do not use the agents scratching enamel or painted surfaces. Use
creams or liquid cleaning agents not containing hard agents.
3. The liquid spilling on the cooker may cause damage to enamel surfaces
when they burn. Promptly clean spilling liquids.
4. Do not use corrosive cleaning agents when cleaning control panel.
5. Never drip water on and touch the glass when the oven is hot.
6. Remove covers of the oven. Wash and rinse with soapy water.
Cleaning the Interior Part of Your Oven
� Pull the power-supply plug out of the socket before starting cleaning.
Remove trays and grill. Wipe the interior parts with soap soaked cloth.
Clean it with dampened cloth again and wipe dry.
� Do not use dry and powder cleaning agents. Clean the glass surfaces with
glass cleaning agents.
� Do not use hard brushes, steel wood or sharp instruments such as a knife
when cleaning the interior part of the oven.
� Remove the glass front lid by unscrewing the fixing parts by use of a
screwdriver, and remove the inside glass, clean and rinse it. After drying it
place the seal properly and re-install the glass
SECTION 8 MAINTENANCE & CLEANING
Cleaning your Oven
1. Before starting cleaning, pull the power-supply plug out of the socket. If
the oven is hot, wait for cooling off.
2. Do not use the agents scratching enamel or painted surfaces. Use
creams or liquid cleaning agents not containing hard agents.
3. The liquid spilling on the cooker may cause damage to enamel surfaces
when they burn. Promptly clean spilling liquids.
4. Do not use corrosive cleaning agents when cleaning control panel.
5. Never drip water on and touch the glass when the oven is hot.
6. Remove covers of the oven. Wash and rinse with soapy water.
Cleaning the Interior Part of Your Oven
� Pull the power-supply plug out of the socket before starting cleaning.
Remove trays and grill. Wipe the interior parts with soap soaked cloth.
Clean it with dampened cloth again and wipe dry.
� Do not use dry and powder cleaning agents. Clean the glass surfaces with
glass cleaning agents.
� Do not use hard brushes, steel wood or sharp instruments such as a knife
when cleaning the interior part of the oven.
� Remove the glass front lid by unscrewing the fixing parts by use of a
screwdriver, and remove the inside glass, clean and rinse it. After drying it
place the seal properly and re-install the glass
SECTION 8 MAINTENANCE & CLEANING
Cleaning your Oven
1. Before starting cleaning, pull the power-supply plug out of the socket. If
the oven is hot, wait for cooling off.
2. Do not use the agents scratching enamel or painted surfaces. Use
creams or liquid cleaning agents not containing hard agents.
3. The liquid spilling on the cooker may cause damage to enamel surfaces
when they burn. Promptly clean spilling liquids.
4. Do not use corrosive cleaning agents when cleaning control panel.
5. Never drip water on and touch the glass when the oven is hot.
6. Remove covers of the oven. Wash and rinse with soapy water.
Cleaning the Interior Part of Your Oven
� Pull the power-supply plug out of the socket before starting cleaning.
Remove trays and grill. Wipe the interior parts with soap soaked cloth.
Clean it with dampened cloth again and wipe dry.
� Do not use dry and powder cleaning agents. Clean the glass surfaces with
glass cleaning agents.
� Do not use hard brushes, steel wood or sharp instruments such as a knife
when cleaning the interior part of the oven.
� Remove the glass front lid by unscrewing the fixing parts by use of a
screwdriver, and remove the inside glass, clean and rinse it. After drying it
place the seal properly and re-install the glass
CHANGING OVEN LAMP
Removing the oven door - fig 9
To aid cleaning and make Access to the oven
interior easier , the oven door can be simply
removed. To facilitate cleaning of the oven ,
the door can be removed via the hinges as
follows:
Hinges with movable bolt
The hinges A are provived with two movable bolts B
When bolt B is raised, the hinge is released from its
housing .
Having done this, the door must be lifted upwards
and removed , sliding it towards the outside;
grip the sides of the door near the hinges when
performing these operations.
To refit the door firstly slide the hinges into their slots.
Before closing the door remember to rotate the two movable bolts B used to hook
the two hinges.
Changing Oven Lamp
1. Pull the plug out of socket.
2. Turn the lamp fixing glass counter-clockwise direction to seperate it.
3. To seperate lamp from body turn it to counter-clockwise direction.
4. Fix new lamp that you gain from authorised service in place of old lamp.
CHANGING OVEN LAMP
Removing the oven door - fig 9
To aid cleaning and make Access to the oven
interior easier , the oven door can be simply
removed. To facilitate cleaning of the oven ,
the door can be removed via the hinges as
follows:
Hinges with movable bolt
The hinges A are provived with two movable bolts B
When bolt B is raised, the hinge is released from its
housing .
Having done this, the door must be lifted upwards
and removed , sliding it towards the outside;
grip the sides of the door near the hinges when
performing these operations.
To refit the door firstly slide the hinges into their slots.
Before closing the door remember to rotate the two movable bolts B used to hook
the two hinges.
Changing Oven Lamp
1. Pull the plug out of socket.
2. Turn the lamp fixing glass counter-clockwise direction to seperate it.
3. To seperate lamp from body turn it to counter-clockwise direction.
4. Fix new lamp that you gain from authorised service in place of old lamp.
-13-
-13-
SECTION 8 MAINTENANCE & CLEANING
Cleaning your Oven
1. Before starting cleaning, pull the power-supply plug out of the socket. If
the oven is hot, wait for cooling off.
2. Do not use the agents scratching enamel or painted surfaces. Use
creams or liquid cleaning agents not containing hard agents.
3. The liquid spilling on the cooker may cause damage to enamel surfaces
when they burn. Promptly clean spilling liquids.
4. Do not use corrosive cleaning agents when cleaning control panel.
5. Never drip water on and touch the glass when the oven is hot.
6. Remove covers of the oven. Wash and rinse with soapy water.
Cleaning the Interior Part of Your Oven
� Pull the power-supply plug out of the socket before starting cleaning.
Remove trays and grill. Wipe the interior parts with soap soaked cloth.
Clean it with dampened cloth again and wipe dry.
� Do not use dry and powder cleaning agents. Clean the glass surfaces with
glass cleaning agents.
� Do not use hard brushes, steel wood or sharp instruments such as a knife
when cleaning the interior part of the oven.
� Remove the glass front lid by unscrewing the fixing parts by use of a
screwdriver, and remove the inside glass, clean and rinse it. After drying it
place the seal properly and re-install the glass
SECTION 9 INFORMATION ABOUT TRANSPORTATION
In case of transport hold your oven vertically and do not put anything
on it.
At transportation;
Please Keep your ovens original box.
Carry your oven with original box. Obey carrying signs on box.
To keep your oven door from damage that may occur during
transportation by wire grate and trays, stick 1-1,5 cm thin cardboard or
paper on oven front door inner glass with sticky tape at level of trays.
Stick oven door to side walls with sticky tape.
To place packaging materials look at figures below.
If your oven haven’t got an original box ;
Take precautions about damage possiblity of oven outer walls,
glass, painted, enamelled or stainless steel surfaces.
SECTION 10 Things To Do Before Calling Authorised Service
SECTION 9 INFORMATION ABOUT TRANSPORTATION
In case of transport hold your oven vertically and do not put anything
on it.
At transportation;
Please Keep your ovens original box.
Carry your oven with original box. Obey carrying signs on box.
To keep your oven door from damage that may occur during
transportation by wire grate and trays, stick 1-1,5 cm thin cardboard or
paper on oven front door inner glass with sticky tape at level of trays.
Stick oven door to side walls with sticky tape.
To place packaging materials look at figures below.
If your oven haven’t got an original box ;
Take precautions about damage possiblity of oven outer walls,
glass, painted, enamelled or stainless steel surfaces.
SECTION 9 INFORMATION ABOUT TRANSPORTATION
In case of transport hold your oven vertically and do not put anythin
on it.
At transportation;
Please Keep your ovens original box.
Carry your oven with original box. Obey carrying signs on box.
To keep your oven door from damage that may occur durin
transportation by wire grate and trays, stick 1-1,5 cm thin cardboard o
paper on oven front door inner glass with sticky tape at level of trays
Stick oven door to side walls with sticky tape.
To place packaging materials look at figures below.
If your oven haven’t got an original box ;
Take precautions about damage possiblity of oven outer walls
glass, painted, enamelled or stainless steel surfaces.
SECTION 10 Things To Do Before Calling Authorised Service
SECTION 9 INFORMATION ABOUT TRANSPORTATION
In case of transport hold your oven vertically and do not put anythin
on it.
At transportation;
Please Keep your ovens original box.
Carry your oven with original box. Obey carrying signs on box.
To keep your oven door from damage that may occur durin
transportation by wire grate and trays, stick 1-1,5 cm thin cardboard o
paper on oven front door inner glass with sticky tape at level of trays
Stick oven door to side walls with sticky tape.
To place packaging materials look at figures below.
If your oven haven’t got an original box ;
Take precautions about damage possiblity of oven outer walls
glass, painted, enamelled or stainless steel surfaces.
SECTION 10 Things To Do Before Calling Authorised Service
-14-
-14-
Table of contents
Other Termikel Oven manuals
Popular Oven manuals by other brands
Frigidaire
Frigidaire FGEW3065PF General installation guidelines
APW Wyott
APW Wyott XWAV1417A Installation and operating instructions
Electrolux
Electrolux EOB53202 user manual
Gaggenau
Gaggenau BO 270/271 instruction manual
Brandt
Brandt BKFC2070X user manual
Indesit
Indesit HI 20.B IB operating instructions
Siemens
Siemens HB 78 6B Series user manual
Garland
Garland Moisture+ MPOE5L Service manual
Hotpoint Ariston
Hotpoint Ariston FC 832 C.1 /HA operating instructions
Hotpoint
Hotpoint 6181 Full Instructions for Installing and Operating
AEG
AEG NC4003020 user manual
CONSTRUCTA
CONSTRUCTA CH1102 0 Series instruction manual