Tescom NACC10 User manual

NACC10
For household use only
User Manual
Hair Styler
In particular, be sure to read the Safety Warnings.
Store the manual in a location where it can be easily
accessed at any time.
Before use, please read this manual and be sure to use the
appliance properly. The manufacturer assumes no
responsibility for the appliance when it is used in ways
other than the proper method described in this manual.

Safety Warnings
After use, turn off and unplug the unit.
Pull on the power plug instead of the power cord when unplugging the
styler.
Make sure to use the styler with a power supply of AC220-240V.
Do not use the styler if the inside of the main unit turns red, if it generates
smoke, or if you hear the sound of foreign matter moving inside it.
Regarding the power cord, do not damage, forcibly bend, twist, pull, load
any heavy weight onto, bring near to any hot object, pinch, modify, or
bundle it when using the styler. Do not wrap the cord around the main unit.
Long-term use or misuse may cause the power cord to become damaged.
Do not use it if:
・The styler sometimes does not blow air;
・The power cord remains twisted;
・The base of the power cord or plug is deformed or damaged; or
・The power plug is loose in the AC outlet.
If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent, or similarly qualified persons in order to avoid a hazard.
Do not leave the styler with the power switch turned ON. Do not put the
styler on anything flammable or sensitive to heat, such as a mattress, paper,
or plastic bags.
Do not use it on babies. Do not have a child close by when using it.
This styler should be stored out of reach of children.
This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction concern-
ing use of the appliance by a person responsible for their safety. Children
should be supervised to ensure that they do not play with the appliance.
Do not use the styler near any flammable material, such as gasoline,
benzine, thinner, gas, or hair cosmetics agents. Do not use the styler with
hairspray.
Do not block the air intake or outlet.
Do not put hairpins or any other foreign objects into the air intake or outlet.
Do not look into the air outlet while it is in use.
Keep the air intake at least 10 cm away from hair to prevent hair from being
sucked into the styler during use.

This symbol
indicates that
this product
must not be
used near water,
such as baths
or basins with
shower water.
Do not use this appliance near bathtubs, showers, basins or
other vessels containing water.
When the appliance is used in a bathroom, unplug it after
use since the proximity of water presents a hazard even
when the appliance is switched off.
For additional protection, the installation of a residual current
device (RCD) having a rated residual operating current not
exceeding 30 mA is advisable in the electrical circuit supply-
ing the bathroom. Ask your installer for advice.
Do not use the styler with wet hands.
Do not place the styler in water or pour water on it. Store it in a place with
low moisture.
Do not modify the styler. No
one other than repair
engineers should disassemble
or repair the styler.
Clean the air intake and inlet
net at least once a month.
Do not allow too much hair to wrap around the attachment.
Do not touch any attachment or the air outlet during or immediately after
use, and also avoid any accidental contact with your skin, as the attach-
ments and the outlet will be hot.
The styler is intended for the hair-drying and styling of human hair. Do not
use it for other purposes, such as for pet hair.
Do not let the styler fall or sustain impact. Do not use it if it has been
damaged.
Do not touch the styler with hair dye stained hands. Never apply alcohol,
benzine, or enamel remover.
Do not apply hairstyling products onto the attachment directly.
The styler is not intended for business use. Keep it away from unspecified
usage by a large number of people.

Part names and functions
Attachment
Curl Iron BrushCatch Blow Brush
Volume Up Brush
2: Strong hot air
1: Weak hot air
0: Off
Main switchAir outlet
Ion indicator
During styler operation,
ions are produced,
and the corresponding
lamp lights up.
Push button
Air intake
(with an inlet net)
Main unit
Bush
Power cord
Used to lift up hair roots
Style-maintain
switch
Used to curl hairUsed to blow hair
* Do not touch any attachment
during or immediately after
use, as such will be very hot.
The unit discharges negative and
positive ions at the same time,
and it suppresses static electricity
so as to reduce hair volume and
hair damage.

How to use
Push button
Convex partConcave part
2
1
0
Using the style-maintain switch
Set the main switch to “2” or “1” to comb and
blow your hair.
After use, set the main switch
to “0” and unplug the styler.
Add the attachment to the main unit.
How to detach it
While maintaining pressure on the
push button, pull the attachment away.
Insert the power plug into an AC outlet.
(* When attaching it, make sure to check for any foreign matter inside
the unit.)
Align the concave part of the attachment with the convex part of the
main unit, and push until you hear a clicking sound.
Cool air comes out when the switch is pressed.
Before removing the brush from the hair, apply cool
air to the hair for 10–15 seconds to help ensure that
the hair is set for a long time.

Maintenance
Air intake
Inlet net
Air intake・inlet net
Attachment
Wipe away any dirt with a dry soft cloth.
To clean off difficult dirt, immerse a cloth in soapy water or neutral
detergent diluted with water, wring it dry, and wipe away the dirt.
Set the main switch to “0” and unplug the unit from the AC
outlet before performing maintenance.
To clean the air intake and the inlet net (internally and externally), use
a soft brush to remove dust and hair.
Main unit
To remove the net from the main unit, turn the inlet net
counterclockwise until the mark on the net is aligned with on
the main unit.
Insert the inlet net into the main unit with the mark on the net
aligned with on the main unit, and turn the net clockwise until is
aligned with the same mark on the unit.
Use a brush to remove dust and hair.
Wash it in water, and leave it out to dry completely.

Possible cause SolutionIssue
Troubleshooting
The effect of ions tends to be ineffective if the hair is charged with a
small amount of static electricity or if the use environment does not provide
optimum conditions.
Hot or cool air comes
out unintentionally. A
spark appears from the
air outlet.
(A spark is caused by
the safety device.)
Dust and hair have
become attached to
the air intake.
The air intake is
blocked.
Maintain the air intake.
Remove any objects that
block the air intake.
If this does not eliminate
the problem, stop using
the styler.
Immediately stop using
the styler.
The AC outlet may have
a problem. Consult an
electronics appliance
store.
The safety device is not
operating normally.
The power cord has
been broken.
The power cord is
about to break.
The plug is connected
to the AC outlet in a
loose manner.
The main unit or hot air
is abnormally hot.
The inside of the main
unit becomes red or
generates smoke.
No air blows out.
Air comes out but stops
from time to time.
The base of the power
cord or plug is deformed
or damaged.
The power cord remains
twisted.
Something sounds as though it’s moving around within the main unit.
Power plug is abnor-
mally hot.

Power Source
Product number
220-240V〜 50-60Hz
NACC10
Power consumption 400-480W
Power cord length 1.7m
Specifications