BaByliss 2440BDU User manual

Model 2440BDU
DIAMOND HEATED
SMOOTHING BRUSH

DIAMOND HEATED SMOOTHING BRUSH
The BaByliss Diamond Heated Smoothing Brush features an unique
bristle combination for fast, easy straightness with visible shine. The
heated ceramic straightening ns straighten the hair as you brush
while the exible taming bristles and detangling combs give gentle
grip, tension and control for total smoothing on all hair types. The
super ionic technology gives ultimate frizz-control and boosts shine.
FEATURES
• Unique bristle combination for total smoothness
• Heated straightening ns
• Flexible taming bristles
• Detangling combs
• Diamond infused ceramic nish
• Super ionic frizz-control
• Up to 200°C
• Advanced Ceramics™ for fast heat up
• 3 heat settings: 180°C, 190°C, 200°C
• Auto shut off
• 3m salon swivel cord
• Heat protection mat
• Storage pouch
• Heat protective glove
• 3 year guarantee
SUPER IONIC TECHNOLOGY
The BaByliss Diamond Heated Smoothing Brush features an advanced
ionic system which releases super frizz-controlling conditioners to
smooth the cuticle, eliminate static and boost shine.
Please note: The release of ions from the ports produces a slight
buzzing noise.

SAFETY CAUTIONS
• This appliance should only be used as described within
this instruction booklet. Please retain for reference.
IMPORTANT CHILD SAFETY
WARNING! Polythene bags over a product or packaging
may be dangerous. To avoid danger of suffocation, keep
these wrappers away from babies and children. This bag
is not a toy.
WARNING! THIS APPLIANCE GETS HOT!
• ALWAYS keep out of reach of children (during and after
use and whilst cooling).
• This appliance should not be used, cleaned or maintained
by children.
• Always take extra care if used on children or near
children.
• Do not use on very young children.
IMPORTANT SAFETY
WARNING! Do not use this appliance near water contained
in basins, bathtubs or other vessels.
• Do not use the appliance in the bathroom.
• Do not immerse the appliance in water or other liquids.
• Always inspect the appliance before use for noticeable
signs of damage. Do not use if damaged, or if the
appliance has been dropped. In the event of damage,
contact the Conair Customer Care Line (refer to 'UK
After Sales Service' section for further information).

• Do not use the appliance if the lead is damaged. In
the event of damage, discontinue use immediately.
If the lead is damaged it must be replaced by the
manufacturer. Return the appliance to the Customer
Care Centre (refer to 'UK After Sales Service' section for
further information). No repair must be attempted by the
consumer.
• Do not leave the appliance unattended when switched
on or plugged in.
• During use do not place the appliance on any heat
sensitive surface, even when using the heat mat
provided.
• Take care to avoid the hot surface of the appliance
coming into direct contact with the skin, in particular the
eyes, ears, face and neck.
• In the event the appliance is left switched on, the
appliance will automatically shut off after 72 minutes. If
you wish to continue using the appliance after this time,
simply slide the switch to the off position and then slide
the switch to the desired temperature setting to turn the
power on.
• This appliance should not be used by adults whose
reduced physical, sensory or mental capabilities, or
whose lack of experience and knowledge, might cause
a hazard, unless they have been correctly instructed to
understand the safe use and hazards involved and are
adequately supervised.
• After use, do not coil the lead around the appliance as
this may cause damage. Instead, coil loosely by the side

of the appliance.
• This appliance complies with the requirements of
Directives 2004/108/EC (Electromagnetic Compatibility)
and 2006/95/EC (Electrical Safety of Domestic
Appliances).
DIAMOND RADIANCE SHINE SYSTEM
Diamond Radiance Shine System combines luxuriously smooth
diamond infused ceramic with active ionic conditioners to transform
the hair.
✓Giving ultimate smoothness
✓Adding brilliant healthy shine
✓Calming frizz
✓Leaving hair beautifully silky soft
IMPORTANT! The BaByliss Diamond Heated Smoothing Brush has
a high performance Advanced Ceramics™ heater and is designed to
reach very high temperatures. If the maximum setting is too hot for
your hair type then there are two lower temperature settings available
to use.
CAUTION! This is a high heat appliance. Care must be taken to avoid
the heated surface area coming into direct contact with the skin, in
particular the eyes, ears, face, neck, hands and shoulder area.

HEAT SETTINGS
The heated brush has 3 heat settings. If you have ne, delicate or
coloured hair, use the lower heat settings and if you have thick or
coarse hair, use the higher heat settings. It is suggested to start on
the lowest setting on initial use and increase the temperature until the
desired result is achieved.
The LED will blink until the temperature selected has been reached.
Once the temperature has been reached the LED will remain solid in
colour.
0 = OFF
I = 180°C (Yellow)
II = 190°C (Orange)
III = 200°C (Red)
INSTRUCTIONS FOR USE
• Ensure hair is fully dried. Use a hairbrush to remove any tangles from
the hair and create your parting ready for styling.
• To turn the unit on, slide the switch to the heat setting required. The
LED display will illuminate and blink until the selected temperature
has been reached. Once the temperature has been reached the LED
will remain solid in colour.
• Place the heated brush underneath the hair
section close to the roots with the bristles
pointing upwards. Use your other hand to pull the
hair section taut against the heated plate until the
bristles penetrate through the hair.
• Glide the heated brush steadily down towards
the ends of the hair. Continue to use the other
hand to keep the hair taut, sliding it down the
section ahead of the brush. Please note. The
hand sliding down the hair section must not be
too close to the brush to avoid any heat contact.

• As the heated brush nears the end of the hair,
release the hair section with the other hand and
turn the heated brush under to give shape at
the ends of the hair.
• To nish your style and smooth the top of the
hair, place the heated brush on the top of the
hair section. Use the other hand to pull the
section upwards and taut against the heated
plate until the bristles penetrate through the
hair. Take care to avoid pressing the heated
plate against the scalp.
• Glide the heated brush down towards the ends
of the hair, using the other hand as before to
keep the section taut.
• As the heated brush nears the end of the hair,
release the hair section from the other hand and
brush through to the ends.
• Repeat as necessary, until desired result is achieved.
• After use, slide the switch to the "O" position to turn the heated brush
off.
• Allow the heated brush to cool down completely, place the heated
brush into the pouch provided and store away.

Please note: The release of ions from the ports produces a slight
buzzing noise.
Useful tips
• For best results on thick or curly hair, insert the brush head close to
the root, underneath the hair section and glide slowly until you reach
the ends of the hair. Then place the heated brush close to the root,
on top of the hair section and glide down slowly until you reach the
ends of the hair. Repeat as necessary.
• For a style with shape on the ends, insert the heated brush underneath
the hair section, close to the root. As you glide down the hair rotate
the brush around slightly to curl the ends under.
HEAT PROTECTION MAT
This appliance comes with a heat mat for use during and after styling.
During use do not place the appliance on any heat sensitive surface,
even when using the heat mat provided. After use, switch off and
unplug the appliance. Immediately wrap the appliance in the heat mat
provided and allow to fully cool down. Continue to keep it of the reach
of children as the appliance will remain hot for several minutes.
STORAGE POUCH
The inside lining of the pouch is heat resistant, allowing the heated
brush to be placed inside the pouch whilst cooling, allow to fully cool
down before storing away. Do not place on any heat sensitive surface
while the appliance is still hot.
IMPORTANT! Do not place the appliance onto the outside of the
pouch when it is still hot, as the outside material is not heat resistant.
Use the heat protection mat to protect work surfaces.
HEAT PROTECTIVE GLOVE
A heat protective glove has been supplied to help protect the hand
from temporary contact with the hot surface of the appliance.
Please note: The heat protective glove is only designed to give initial
contact protection. Discomfort will be caused with prolonged contact
with the hot surface.

AUTO SHUT OFF
This appliance has an automatic shut off feature for added safety. If
the appliance is switched on for more than 72 minutes continuously,
then it will automatically switch off. If you wish to continue using the
appliance after this time, simply slide the switch to the off position and
then slide the switch to the desired temperature setting to turn the
power on.
CLEANING AND MAINTENANCE
To keep your heated brush in the best possible condition, it is
important to make sure there is no product build up on the heated
plate, straightening ns, bristles and combs. This will ensure optimum
results with every use. Use a damp cloth to wipe away any styling
product, only do this when the heated brush is completely cool and
allow to fully dry before use.
To prevent cord damage never wrap the cord around the heated brush,
always store the cord next to it.
IMPORTANT! Do not immerse the appliance in water or other liquids.
UK GUARANTEE
This BaByliss appliance is guaranteed for consumer use for 3 years.
This guarantee covers defects under normal use from date of
purchase and ceases to be valid in the event of alteration or repairs by
unauthorised persons. If the appliance does not perform satisfactorily
due to defects in materials or manufacture, it will be repaired or
replaced through Conair UK After Sales Service. The Conair Group
Ltd reserves the right to amend terms and specications without prior
notice.
This guarantee in no way affects your statutory rights.

UK AFTER SALES SERVICE
For further advice on using the appliance or should you need to return
your product, please contact the Conair Customer Care Line on
0370 5 133191 (09:00 to 17:00 Monday to Friday) or e-mail your enquiry to
[e-mail].
The return address is:
Customer Care Centre
Conair Logistics
Unit 4, Revolution Park
Buckshaw Avenue
Buckshaw Village
Chorley
PR7 7DW
Please enclose your returns number, name and address details, together
with a copy of proof of purchase and details of the fault.
SAFE DISPOSAL
The symbol on the product or on its packaging indicates that this
product may not be treated as household waste. Instead it should be
handed to an appropriate collection point for the recycling of Electrical
and Electronic equipment. By ensuring this product is disposed of
correctly, you will help prevent potential negative consequences for
the environment and human health, which could otherwise be caused
by inappropriate waste handling of this product. For more detailed
information about the recycling of this product, please contact your
local council ofce or your household waste disposal service.

UK WIRING INSTRUCTIONS
The wires in the mains lead are coloured in accordance with the
following code:
BLUE = NEUTRAL
BROWN = LIVE
As the colours of the wire in the mains lead of this appliance may not
correspond with the colour marking identifying the terminals on your
plug, proceed as follows:
• The wire which is coloured BLUE must be connected to the terminal
which is marked with the letter N.
• The wire which is coloured BROWN must be connected to the
terminal which is marked with the letter L.
• Neither the BLUE nor BROWN wires should be connected to the
terminal which is marked with the letter E or the symbol.
This appliance is supplied tted with a BS1363 mains plug and a
BS1362 5A fuse. If this plug is removed from the appliance please
ensure it is disposed of safely as a disconnected plug is dangerous if
reconnected to the mains. If any other type of plug is used, a 5A fuse
must be tted.