Tesla CA65U22U User manual

UHD SMART Android TV with ATSC
CA65U22U
CA70U22U
CA75U22U
UsrerManual

Contents
Safety and warnings......................................................................................1-5
Introduction................................................................................... ..............6
Installation...................................................................................................7-10
...................................................................................................11
General Description............................................................................ ..........12-14
External Connection......................................................................................15-17
Menu Operations...........................................................................................18-25
Trouble Shooting...........................................................................................26-27
Wall Mount

SAFETY AND WARNINGS
-1-
TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REMOVE COVER (OR BACK).NO USER SERVICEABLE
PARTS INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
RISK OF ELECTRIC SHOCK!
DO NOT OPEN!
ATTENTION
RISQUE DE CHOC ELECTRIQUE!
NE PAS OUVRIR!
CAUTION
CAUTION：
The lightning flash with arrowhead symbol within an
equilateral triangle is intended to alert the user to the
presence of uninsulated “hazardous voltage” within the
product’s enclosure, which may be of sufficient
magnitude to induce a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to the presence of important
operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE.
TO PREVENT THE SPREAD OF FIRE, KEEP CANDLES OR OPEN FLAMES AWAY
FROM THIS PRODUCT AT ALL TIMES.
WARNING:
TO PREVENT ELECTRIC SHOCK. DO NOT USE THIS POLARIZED PLUG WITH
AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE
BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE.
CAUTION:
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance with
the FCC Rules could void the user’s authority to operate this equipment.
CAUTION:
Serial number: Model number:
Location of the required marking
The rating sheet and the safety caution are on the
rear of the unit.
Important Note:
In the spaces below, enter the model and serial
number of your television (located at the rear of the
television cabinet). Staple your sales receipt or
invoice to the inside cover of this guide. Keep this
user’s guide in a convenient place for future
reference. Keep the carton and original packaging for
future use.
BATTERY PRECAUTIONS:
Batteries should not be exposed to excessive heat
such as sunshine,fire or the like.
The remote control unit uses infrared beams to
transmit signals, so sunlight or fluorescent light on
the remote sensor may shorten operating
distance.
Incorrect use of batteries may cause them to leak
or burst. Read the battery warnings and use the
batteries
properly.
Do not mix old and new batteries.
Do not mix alkaline, standard (carbon-zinc), or
rechargeable, (Ni-Cd, Ni-MH, etc.) batteries.
Remove batteries if the remote control will not be
operated for an extended period of time.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS:
(1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE UNDESIRED OPERATION.
Cables:
Connections to this device must be made with shielded
cables with metallic RF/EMI connector hoods to maintain
compliance with FCC Rules and Regulations.
Restrictions in the 5 GHz band:
The device for operation in the band 5150-5250 MHz is
only for indoor use to reduce the potential for harmful
interference to co-channel mobile satellite systems.

1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer's instructions.
8) Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding
prong. The wide blade or the third prong are
provided for your safety. If the provided plug does
not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod, bracket, or
table specified by the manufacturer, or sold with
the apparatus. When a cart is used, use caution
when moving the cart/apparatus combination to
avoid injury from tip-over.
-2-
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has
been damaged in any way, such as power-supply
cord or plug is damaged, liquid has been spilled
or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture,
does not operate normally, or has been dropped.
15) The wall plug is the disconnecting device.
The plug must remain readily operable.
16) Remote control batteries should not be exposed
to excessive heat such as sunshine, fire, or the
like. Dispose of used battery promptly and
correctly, according to local environmental laws
and guidelines in force.
CAUTION: Risk of fire or explosion if the battery
is replaced by an incorrect type.
The excessive sound pressure from earphones
and headphones can cause hearing loss.
WARNING:
This symbol indicates that this product
incorporates double insulation between hazardous
mains voltage and user accessible parts.
When servicing use only identical replacement parts.
CAUTION:
Double pole, neutral fusing.
Disconnect mains before servicing.
Important Safety Instructions
17) The apparatus should not be exposed to dripping
or splashing, and no objects filled with liquids,
such as vases, should be placed on the apparatus.
18) No naked flame sources, such as lighted candles,
should be placed on the apparatus.
19) Your TV has four VESA mounting holes on the
back. If you attach a wall-mount bracket or TV
stand to the back of your TV, the bracket or stand
must be securely attached using all four holes.
If you do not use all four mounting holes, your TV
may fall and cause property damage or personal
injury. See the documentation that came with
your wall mount or TV stand for complete
mounting instructions.

-3-
WARNING
1) Stability Hazard
personal injury or death.
Never place a television set in an unstable location.
A television set may fall, causing serious personal
injury or death. Many injuries, particularly to
children, can be avoided by taking simple
precautions such as:
• Using cabinets or stands recommended by the
manufacturer of the television set.
• Only using furniture that can safely support the
television set.
• Ensuring the television set is not overhanging the
edge of the supporting furniture.
• Not placing the television set on tall furniture (for
example, cupboards or bookcases) without
anchoring both the furniture and the television set
to a suitable support.
• Not placing the television set on cloth or other
materials that may be located between the
television set and supporting furniture
• Educating children about the dangers of climbing
on furniture to reach the television set or its
controls.
If your existing television set is being retained
and relocated, the same considerations as above
should be applied.
2) To reduce the risk of fire or electric shock, do not
remove any cover or expose the device to rain or
moisture. No user-serviceable parts are inside.
Refer servicing to qualified service technicians.
3) After completing any service or repair to this device,
ask the service technician to perform routine safety
checks to determine that your TV is in correct
operating condition.
4) These servicing instructions are for use by qualified
service personnel only. To reduce the risk of
electric shock, do not perform any servicing other
than that contained in the operating instructions
unless you are qualified to do so.
5) When replacement parts are required, make sure
that the service technician uses replacement parts
specified by the manufacturer that have the same
characteristics as the original part. Unauthorized
substitutions may result in re, electric shock,
personal injury, or other hazards.
6) If an outside antenna or cable system is connected
to your TV, make sure that the antenna or cable
system is grounded to provide some protection
against voltage surges and built-up static charges.
Article 810 of the National Electrical Code, ANSI/
NFPA No. 70, provides information with respect to
correct grounding of the mast and supporting
structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding
conductors, location of the antenna-discharge unit,
connection to grounding electrodes, and
requirements for the grounding electrode.
The television set may fall, causing serious
Note to CATV system installer
Article 820 of the National Electrical Code, ANSI/
NFPA No. 40 provides guidance for correct
grounding. Specifically, it states that the cable
ground must be connected to the grounding system
of the building as close to the point of cable entry
as practical.
7) For added protection for your device receiver
during a lightning storm, or when it is left
unattended and unused for long periods of time,
unplug it from the power outlet and disconnect any
antenna or cable system. This helps prevent
property damage and personal injury from lightning
and power line surges.
8) An outside antenna system should not be located
in the vicinity of overhead power lines or other
electric light or power circuits, or where it can fall
into such power lines or circuits. When installing
an outside antenna system, take extreme care to
keep from touching such power lines or circuits as
contact with them might be fatal.
9) Your TV’s screen is made of glass. Do not drop
your TV or hit, jolt, or press hard against the LCD
panel. If the screen breaks, be careful of broken
glass.
If the LCD panel is broken, make absolutely sure
that you do not touch the liquid in the panel.
This may cause skin inflammation.
If the liquid gets in your mouth, immediately
gargle, rinse, and consult with your doctor. Also,
if the liquid gets in your eyes or touches your skin,
consult with your doctor after rinsing for at least
15 minutes or longer in clean water.
Antenna lead-in wire
Grounding clamp
Antenna discharge unit
Grounding conductors
Ground clamps Power service
grounding electrode system
Electric service equipment
1
2
3
4
5
6
7

-4-
10) Unplug this TV from the power outlet and refer
servicing to qualified service personnel under
the following conditions:
• When the power supply cord or plug is damaged
or frayed.
• If liquid has been spilled or objects have fallen
into your TV.
• If your TV has been exposed to rain or water.
• If your TV does not operate normally by following
the operating instructions. Adjust only those
controls covered by the operating instructions
because incorrect adjustment of other controls
may result in damage and will often require
extensive work by a qualified technician to
restore your TV to its normal operation.
• If your TV has been dropped or damaged in any
way.
• When your TV exhibits a distinct change in
performance.
11) Operate your TV only from the type of power
source indicated on the marking label. If you are
not sure of the type of power supplied to your
home, consult an electrician or your local power
company.
12) Moisture will form on the TV if the TV is brought
from cool surroundings into a warm room or if the
temperature of the room rises suddenly. When this
happens, the TV's performance may be impaired.
To prevent this, let the TV stand in its new
surroundings for about an hour before switching
it on, or make sure that the room temperature rises
gradually. Condensation may also form during the
summer if the TV is exposed to the breeze from an
air conditioner. In such cases, change the location
of the TV.
13) Your TV may contain materials that are regulated
for environmental reasons. Your TV also contains
materials that can be recycled and reused. To help
protect the environment, contact your local
authorities for information about disposal or
recycling and about finding a recycler in your
area before you dispose of your TV.
14) To avoid interference with your TV picture and
sound, operating problems, or even damage,
keep your cordless and cellular telephones away
from the TV.
15) The LCD panel contains almost 3 million thin film
transistors, which provide exceptionally sharp
video quality. Occasionally, a few non-active
pixels may appear on the screen as a fixed blue,
green, or red point. These non-active pixels do
not adversely affect the performance of your TV,
and are not considered defects.

High voltages are used in the operation of this television
receiver. Do not remove the cabinet back from your set.
Refer servicing to qualified service personnel.
To prevent fire or electrical shock hazard, do not expose
the television receiver to rain or moisture.
Do not drop or push objects into the television cabinet
slots or openings. Never spill any kind of liquid on the
television receiver.
Do not block the ventilation holes in the back cover.
Adequate ventilation is essential to prevent failure of
electrical components.
Do not trap the power supply cord under the television
receiver.
Never stand on, lean on, or suddenly push the television or
its stand. You should pay special attention to children.
Serious injury may result if it falls.
Do not place your television on an unstable cart, stand, shelf
or table. Serious injury to an individual , and damage to the
television, may result if it falls. Recommended to utilize rear
mount screw holes for anti-tipping (hardware not included).
When the television receiver is not used for an
extended period of time, it is advisable to disconnect
the AC power cord from the AC outlet.
Avoid exposing the television receiver to direct sunlight
and other sources of heat. Do not stand the television
receiver directly on other products which give off heat,
e.g. video cassette players and audio amplifiers. Do not
place naked flame sources, such as lighted candles on
the television.
Dim:515 *320mm(不包 括底座）
If the television is to be built into a compartment or similar
enclosure, the minimum distances must be maintained. Heat
build-up can reduce the service life of your television, and
can also be dangerous.
-5-

INTRODUCTION
Antenna
Main features Accessories
Wide screen for a complete home theater experience
Super slim LCD TV with LED backlight
3840 x 2160 native resolution for UHD performance
Integrated ATSC TV tuner for HDTV broadcast reception
Beautiful color depth with a contrast ratio of 5000:1
HDMI inputs for true digital connections
®
Specifications
Resolution:
Aspect Ratio:
TV System:
Video Signal System:
Receiving Channel:
Input Power Voltage:
Power Consumption:
Viewing Picture Size(diagonal)
3840 x 2160
16:9
2.0A/2.1A/2.6A
Audio Output Power(THD 10%):
2 x 10W
NTSC
Cable :1-135/ Air: 2-69(ATV&DTV)
High-Definition Multimedia Interface(HDMI) Input
x 4
Composite Input (mini)
AC120V, 60Hz
ATSC Digital system and NTSC Analog system
x 1
65(1449.6x333x906mm, 57.1x13.1x35.7 inch)
70(1556x333x973mm, 61.3x13.1x38.3 inch)
75(1673x362x1032mm, 65.9x14.3x40.6 inch)
Headphone Output
Optical Output
USB 2.0 Input
Dimensions (approx)
with stand fitted(WxDxH)
Net weight TV with stand
x 1
x 1
x 2
Infrared Remote Control...................
1
User’s M anual ...............................
1
Battery(AAA) .................................. 2
Screws........................................... 4
Base stand......................................2
-6-
LAN x 1
65"/70"/75"class
65"/70"/75"diagonal)
65 (16.3kg (35.93lbs) )
70 (19.5kg (42.99lbs) )
75 (22.7kg (50.04lbs) )
The terms HDMI, HDMI High-Definition Multimedia Interface, and the HDMI Logo are
trademarks or registered trademarks of HDMI Licensing Administrator, Inc.
Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories
Licensing Corporation.
Manufactured under license from Dolby Laboratories.
Confidential unpublished works Copyright © 1992–2019 Dolby Laboratories. All rights reserved.
Net weight TV without stand
65 (16.7kg (36.82lbs) )
70 (19.9kg (43.87lbs) )
75 (23.0kg (50.71lbs) )

INSTALLATION
Front panel
REAR Connections
SIDE Connections
All the terminals are(from left to right): LAN, OPTICAL, USB2.0, HDMI4, HDMI3, HDMI2, AV INPUT, RF.
All the terminals are (from left to right):
USB2.0, HDMI1(eARC), HEADPHONES.
≤8m
KEYBOARD
-7-
75"
Bottom
75 Rocker"
65"/70"
1. When the TV is turned on, press the local key for more than 3S to enter standby.
2. For the third-party application, main scene and USB, only the operations in
1) above are detected, and the following 3 operations are not executed;
3. Press the local key for less than 3S to enter the local key menu.
The local key menu includes six options: on / off, program +, program -, volume +,
volume -, and program source;
a) When the local key menu is displayed, the key time is less than 1.5s, and the focus
moves backward once in sequence;
b) When the local key menu is displayed, the long key pressing time is greater than
1.5s, and the function of entering the current focus option is executed.
≤8m
Bottom
65"/70 Rocker"

INSTALLATION
Antenna
CABLE
When shipped from the factory, the Signal Type option is for the RF connector (F-type) set to
the"AIR" (Over-the air antenna) mode.
Power connection
Please note: After unpacking, allow the TV to reach ambient room temperature before
connection the TV to the mains power socket.
Connect the power cord plug to the mains power socket.
-8-
Note:
Aerial connections:F connector.
Input impendance:75 unbalanced.
PLUG
75Ω CABLE
ANTENNA OR CABLE TV
ADAPTER (NOT SUPPLIED) OUTDOOR OR INDOOR ANTENNA
(NOT SUPPLIED)
75"
65" 70"

Prepare to place the TV with the display side down on a flat surface. Due to the size and
weight of this TV, the use of 2 people is recommended when moving it. Ensure the table or
desk you use provides a flat, totally clean surface, and use a soft cloth between the face of the
TV and the table to protect the TV's screen.
1. Locate the 2PCS of the base stand and insert it into the gap in the bottom of the TV , and
check that it is securely held in place as below.
2.Lock 4/6 screws in the designated location as below and check each screw is firmly tightened.
INSTALLATION
Base Stand Assembly Instruction
The base stand
-9-
65"/70
(6 screws)
"75"
(4 screws)

INSTALLATION
AV Equipment
You can use the rear input terminals as follows.
HDMI
-10-
Video Equipments: VCR, Multi Disc Player, DVD Player, Camcorder, Video Game, etc.
HDMI
R
W
Y
R
W
Y
VIDEO EQUIPMENT
R
WY
1 WAN2
3
4
Note: It does not support headset
with microphone, please plug in
headphones only.

Wall Mount
Instruction for Wall Mount
A wall mount kit (purchased separately) would allow you to mount your TESLA
TV on the wall. For detailed information on installing the wall mount, refer
to the instructions provided by the wall mount manufacturer. It is strongly
recommended to contact a technician for professional assistance for wall mount
installation. is not responsible for any damagTESLA e to the product or injury to
yourself or others resulting from the wall-mounting.
- Do not mount your TV at more than a 15 degree tilt.TESLA
-Always use two people to mount the TV to a wall.
- Do not install your Wall Mount Kit while your TV is turned on. It may result in
personal injury due to electric shock.
- 4 pcs of type M6 screws are required for installing the wall mount bracket to
your TV. Do not use screws that are longer than 16 mm. Screws that TESLA
are too long may cause damage to the inside of the TV set.
- Do not fasten the screws too tight for this may damage the TV or cause the
TV to fall, resulting in personal injury. is not liable for these kinds of TESLA
incidents.
-11-
Dimensions for Mounting Hole Pattern
This TV is compatible with a
(65")400x300mm, (70") 400x300
TESLA
mm; (75") 400x300mm mounting hole pattern.
75"65"70"

-12-
Installing Batteries in the Remote Control
General Description
Antenna connection
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be
connected to the antenna jack directly.
75ohm coaxial cable
Antenna cable
Antennas with 75 W Round Leads
External Connection
The batteries (battery pack or batteries installed) shall not be exposed to
excessive heat such as sunshine, fire or the like.
Installing Batteries
1Open the battery compartment
cover on the back side.
2Insert two 1.5V AAA size batteries in
correct polarity. Don´t mix old or used
batteries with new ones.
3Closed the cover.
Point the remote towards the remote
control sensor of the TV and use it
within 8 meters.
Put the used batteries into the recyc-
ling bin since they can negatively
affect the environment.
General Description

-13-
Overview of remote control
General Description
Loading batteries:
1) Remove the lid of the battery compartment.
2) Insert 2 size AAA batteries with polarities as indicated inside the compartment.
3) Replace the lid.
Note:
1) A loading of batteries should be last one year under normal use.
2) If you don't intend to use the remote control for a long period of time, remove batteries
to avoid damage due to leakage.
3) Do not mix old and new batteries or different types.
4) Do not throw batteries into fire or water.
5) The batteries (battery pack or batteries installed) should not be exposed to excessive
heat such as sunshine, fire or the like.

-14-
General Description
Overview of remote control
Press to select the CC mode.
CC
Press to open the Google Play store.
Press to open the Prime Video.
Press to open the YouTube.
Press to open NETFLIX.
Open Input menu(TV, HDMI1,HDMI2,etc).
To set the TV to Standby or Power On modes.
Press to navigate the on-screen menu.
OK: Confirms selection.
To disable or enable the speaker sound output.
(Stop): Press to stop multimedia playback.
(Play/Pause): Start playback or Pause playback.
(Reverse): Reverse Playback rapidly.
Press to open the Home Page.
Press to open or close the on-screen menu.
Google Search: Press to open the google assistant
or start a voice search.
VOL+/-: To adjust sound level.
CH+/CH-: To access the next orprevious channels.
NUMERIC KEY: For direct access to channels
Symbol key
INFO: Display TV status information, such as the channel number,
channel name (if available), or signal source.
Coloured buttons: Implement the relevent operations according to the prompt at
the botton of the menu in the text.
Return to the previous menu.

External Connection
Connecting a Camcorder
The rear panel jacks on your TV make it easy to connect a camcorder to your TV. They allow you
to view the camcorder tapes without using a VCR.
Each Camcorder has a different back panel configuration.
When connecting a Camcorder or DVD, match the color of the connection terminal to the cable.
Video
Yellow
1. Connect a Video Cable between the AV VIDEO in jacks on the TV and the VIDEO OUT jack
on the camcorder.
2. Connect Audio Cables between the AUDIO L and AUDIO R jacks on the TV and the AUDIO
OUT jacks on the camcorder.
3. Connect a Video Cable between the AV VIDEO IN jacks on the TV and the VIDEO OUT jack
on the DVD.
4. Connect Audio Cables between the AUDIO L and R jacks on the TV and the AUDIO OUT jack
on the DVD.
Notes:
1. Whenever you connect an external device to your TV, make sure that power on the unit
is turned off.
2. When connecting an external device, match the color of the connection terminal to the
cable.
White
Red
Camcorder
Video Cable
(Not supplied)
1
Audio Cable (Not supplied)
2
L
R
Y
AV IN
Yellow
Red
White
-15-
Mini AV in

External Connection
Connecting Digital Audio System
This connection can only be made if there is a HDMI Output connector on the external device.
HDMI Cable (Not supplied)
What is HDMI?
HDMI, or high-definition multimedia interface, is a next-generation interface that enables the
transmission of digital audio and video signals using a single cable without compression.
Multimedia interface is a more accurate name for it especially because it allows multiple channels
of digital audio (5.1 channels).
The difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP
(High Bandwidth Digital Copy Protection) coding feature installed, and supports multi-channel digital
audio.
Each DVD player/STB has a different back panel configuration.
Connect an HDMI Cable between the HDMI1, HDMI2, HDMI3, HDMI4 connector on the TV and the
HDMI connector on the DVD player/Set-Top Box.
While using ARC, connect the ARC to HDMI 1, under Live TV, press the "MENU" button to
select "Speaker", "External Audio System"
Notes:
1.Whenever you connect an external device to your TV, make sure that power on the unit
is turned off.
2.When connecting an external device, match the color of the connection terminal to the
cable.
-16-

Connecting PC
External Connection
Supporting Signals
The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.The rear panel jacks on your TV make it easy to connect a Digital Audio System to your TV.
5.1 CH audio is possible when the TV is connected to an external device supporting 5.1 CH.
Connect an OPTICAL Cable between the OPTICAL jacks on the TV and the Digital Audio Input jacks
on the Digital Audio System. When a Digital Audio System is connected to the OPTICAL terminal:
Decrease the gain (volume) of the TV, and adjust the volume level with the
volume control. Digital Audio System's
Digital Audio System
(Black)
OPTICAL
-17-
(Not included)
Mode
Input
RF ATSC(Digital)
NTSC(Analog)
Input
AV
System Resolution
NTSC 480i
PAL 576i
Input
HDMI
Vertical
Frequency
50Hz/60Hz
Resolution
720p
1080i
1080p
3840x2160
50Hz/60Hz
50Hz/60Hz
24Hz/25Hz/30Hz/60Hz