Thane Housewares ZW12-24WFT User manual

H2OVAC TURBOTM
®
WITH AQUA-FORCE TECHNOLOGY
Owner’s Manual
TM
W A T E R F I L T R A T I O N S Y S T E M
V A C U U M C L E A N E R
MODEL:
ZW12-24WFT
W A T E R F I L T R A T I O N S Y S T E M V A C U U M C L E A N E R
H2OVT-E-WETH-Aug2208
U S E R ’ S G U I D E
Thane Direct Canada
Toronto, Canada
www.thane.ca
Thane Direct UK Ltd.
Admail ADM3996, London, W1T 1ZU
www.thanedirect.co.uk
Thane International, Inc.
La Quinta, CA 92253
www.thane.com
Distributed by:
Copyright 2008 Thane International, Inc.
Thane Housewares is a division of Thane International, Inc.
READINSTRUCTIONSBEFOREUSINGVACUUMCLEANER.
USEONLYASDIRECTED.
MADE IN CHINA
WITH AQUA-FORCE TECHNOLOGY
TM
H 2 O VACTURBOTM
®

U S E R ’ S G U I D E
10
U S E R ’ S G U I D E
1
C O N T E N T S
Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2
Components . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
Operating Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Disposal and Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .8
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
PLEASE READ CAREFULLY
Thank you for purchasing the H2O Vac
®
Turbo
TM
water filtration system vacuum cleaner.
Each unit has been manufactured to ensure safety and reliability. Before first use, please
read this User’s Guide carefully and keep it for future reference. It will help you assemble
and operate your new vacuum in the safest and most effective way.
The H2O Vac
®
Turbo
TM
virtually eliminates dust from circulating back into the air; as
the dust is forced through a pool of water where it is trapped. The H2O Vac
®
Turbo
TM
cleans your home and keeps the air around you cleaner at the same time. Thanks to the
advanced water filtration system, with this vacuum cleaner you can vacuum up small wet
spills such as melted ice-cream, cereal and milk, and even broken eggs. However, please
remember that this vacuum cleaner is not designed to vacuum up large amounts of
liquids.
Always empty the water tank immediatelly once the combination of water and
accumulated dirt reaches the Maximum Dirt Level line.
Rated Voltage
220 - 240V,50-60Hz
120V,60Hz
Noise 76db(A)
Max Vacuum 19Kpa
Rated Power 1200W
Protection Class Class II Electric Appliance
NOTE: If the trouble still exists, please contact certified service.
CAUTION: Prior to troubleshooting, disconnect the vacuum from the electrical outlet.
Store your vacuum in a cool and dry place. Avoid placing the machine under direct sunlight or near any
heat sources. Always empty the unit before storing.
Storage
TROUBLESHOOTING
Problem
The vacuum cleaner does
not start.
The vacuum cleaner shuts
off.
The suction power reduces
and the noise increases.
Possible Cause and Solution
The power supply is not properly connected. Check the power cord, plug and
socket. Make sure the power switch is on.
There is a motor protector in this appliance, if motor overheats, the vacuum
cleaner will be shut off by motor protector. You should unplug immediately.
The motor protector will automatically reset when the motor cools down.
Then you can operate the vacuum cleaner again.
The maximum level of dirt collection has been reached.
Turn the H2O Vac
®
TurboTM unit off and disconnect the power cord from the
electrical outlet. Empty the water tank.
Check the foam filter located inside the airflow chamber and clean it as needed.
Accumulated dirt can significantly affect suction power.
There is a blockage. Check that the flexible hose, extension tube, or attachments
are not blocked and remove any causes of blockage.
The HEPA filter requires cleaning or replacement.
Technical Data
REPLACEMENT HEPA FILTERS ARE AVAILABLE FROM THE CUSTOMER
SERVICE CENTER IN THE AREA WHERE YOU PURCHASED THE UNIT.
NOTE: NEVER USE THE VACUUM CLEANER WITHOUT THIS FILTER IN PLACE. USE ONLY THE ORIGINAL FILTERS.
Warning: Disconnect the vacuum from the power supply before removing HEPA filter and remove the
water tank to avoid water from spilling.

IMPORTANT SAFETY INSTRUCTIONS
READ ALL INSTRUCTIONS BEFORE USE
WARNING
– To reduce the risk of burns, electrocution, fire, or injury:
1. Your vacuum cleaner is an electric appliance: it should be operated under normal conditions.
Basic precaution should always be followed to reduce the risk of fire, electrical shock, or injury
2. The following listed materials should not be suctioned up by the vacuum, otherwise it may damage the
appliance, cause fire, or injury to individuals.
a. Hot materials, such as cigarette and coal ashes.
b. Large pieces of materials which can block air openings or get stuck inside air flow chamber.
c. Poisonous, corrosive, or erosive materials (such as acids or detergent).
d. Any flammable or volatile liquid (such as gasoline or goods containing alcohol).
e. Excessive or large amounts of liquid, dirt or dust which could exceed the
“Maximum Dirt Level” line marked on the water container.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN ELECTRICAL SHOCK, FIRE,
DAMAGE TO THE PROPERTY OR SERIOUS PERSONAL INJURY AND EVEN DEAT H .
3. Do not place appliance where it can fall or be pulled into water or other liquid.
4. Do not reach for an appliance that has fallen into water. Unplug immediately!
5. Check all electrical wiring. Beware of damaged cord or plug.
6. This appliance is not intended for use by persons (including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowledge, unless they have been given supervision or
instruction concerning use of the appliance by a person responsible for their safety.
7. This is not a toy. Children should be supervised to ensure that they do not play with the appliance.
8. Check that the main voltage corresponds to the voltage indicated on the rating label, see specifications
b e l o w :
ETL 120V 60Hz 1200W
GS 220-240V 50-60Hz 1200W
9. Do not leave the appliance unattended while plugged in. Unplug from outlet when not in use and before
cleaning.
10. Avoid pulling or folding the hose, doing so may cause deformation or damage.
11. Use this appliance for its intended use as described in this manual. Do not use any other accessories or
attachments not recommended by the manufacturer. Doing so could result in fire, electrical shock, or
personal injury.
12. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been
dropped or damaged, or dropped into water. If the supply cord is damaged, it must be replaced by the
manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
13. Do not pull, lift, or carry by the power cord. Do not use the cord as a handle, close a door on the cord,
or pull the cord around or against sharp edges or corners. Do not run vacuum over power cord.
U S E R ’ S G U I D EU S E R ’ S G U I D E
29
Place the new or cleaned HEPA filter back into the machine, put the
HEPA filter cover back on, and lock the cover by pressing the clips.
Make sure the HEPA filter cover is securely in place. If cover is not
properly closed it will affect the suction power.
The HEPA filter should be cleaned or replaced every 4 months for
optimal performance. However this will depend on the frequency of use
and may need replacing more often. Clean the HEPA filter by gently
shaking it to remove accumulated dust/dirt, then wash it under cold
running water. The HEPAfilter should not be washed with hot water or
any detergents. When removing dust and dirt do not use any brush or
other sharp objects that can cause damage. Let it completely dry before
inserting back into the vacuum. Note: Remember to empty water tank
before turning the unit upside down to avoid water spillage.
Important: The filter should be cleaned after 5 to 6 times of usage
or if it is visibly dirty. The suction power will reduce if you do not
clean the filter frequently. When in operation, the filter should be
locked in place. The filter can be used after it is completely dry.
Check the filter to be sure it fits properly and is not damaged
before reusing.
Occasionally check and clean accumulated dirt on the rubber seal
around the air opening as illustrated. It is important to keep the
rubber seal clean, otherwise it can greatly affect suction power.
To remove the HEPA filter for cleaning or replacing, open the HEPA
cover and simply pull out the filter. Note: Empty water tank before
turning the unit upside down to avoid water spillage.
The HEPA filter is located at the bottom of the vacuum and is there to reduce dirt,
dust and particles from entering back into a room. Check the filter on a regular basis
as it will affect the suction power and smooth running of your vacuum.
To clean power head (optional item):
Remove the transparent cover by pulling it up from the base of the
power head. Remove all accumulated dirt and hair from bristle
roller. The transparent cover can be rinsed under running water,
let it dry before reinstalling.
Remove the small cover located on the bottom side of the power
head and clean any left dirt or hair.
HEPA filter

U S E R ’ S G U I D EU S E R ’ S G U I D E
38
14. Always grab by the plug to remove from outlet. DO NOT pull on cord.
15. Never force the plug into an outlet.
16. The plug must be removed from the socket outlet before cleaning or maintaining the appliance.
17. Do not let the cord hang over the edge of a table or counter, or touch hot surfaces.
18. Before removing plug from wall, turn unit off.
19. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is
being administered.
20. Do not immerse the appliance into hot water, and never put the appliance directly into the sun or near any
heater to avoid deforming of the plastic components or causing a fire.
21. Never operate the appliance when the inlet has been blocked to avoid heating and deforming the plastic
components, or damaging the motor.
22. Do not add foam detergent in the water tank, otherwise water may enter the motor or the circuit
board and cause damage.
23. Do not handle plug or appliance with wet hands.
24. Do not use with any opening blocked; keep openings free of dust, lint, hair, and anything that may reduce
air flow.
25. Use extra care when using unit for cleaning on stairs.
26. Do not strongly pull the power cord from body.
27. There is a motor protector in this appliance. If the motor overheats, the vacuum cleaner will be shut
off by the motor protector. If this occurs, you should unplug the unit immediately. The motor
protector will automatically reset when the motor cools down and you can then operate the vacuum
cleaner again.
28. For ETL 120V units only: To reduce the risk of electric shock, this appliance has a polarized plug (one
blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit
fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the
proper outlet. Do not change the plug in any way.
HOUSEHOLD USE ONLY
SAVE THESE INSTRUCTIONS
Disposal and Maintenance
After opening the rear cover, take out the air flow chamber with
foam filter, by pulling it up. Take out the water tank and pour out
the contents and rinse tank under water.
IT IS RECOMMENDED TO EMPTY THE WATER TANK AFTER
EACH USE, THEN CLEAN AND RINSE IT.
Warning: Always disconnect the vacuum from the electrical outlet
before disposal and maintenance.
Disposal
Stain Remover Kit - refer
to blowing function, attach
the spray bottle to the
curved tube. Fill the spray
bottle with water and add
cleaning solution to create
a foaming action. This will help to get deep
down into dirt. Use the brush to remove stains.
Super Extendable Extension Vacuum Hose with
integrated steel spring. Expandable from approximately
51 to 283 inches (130 to 719 cm).
Plug the longer connecting
p a r t into vacuum,
and the shorter
connecting part
into Flexible Hose.
Optional Items - continued
There is no dust indicator on this machine as it is a bagless vacuum. The water tank is transparent so you
can see how much liquid, dust and dirt has accumulated in the tank. IMPORTANT: When the
accumulation of materials inside the tank reaches the “Maximum Dirt Level” line, proceed as follows.
If you have vacuumed some large pieces of dirt that cannot be
drained down the toilet, then use the strainer (optional item).
Attach the strainer to the water tank as illustrated.
Then drain the dirty water down the toilet. Any large pieces
caught by the strainer can be thrown away in the garbage.
Remove the protective grid, then take out the foam filter located
inside the air flow chamber. Wash it under running water and let
it dry completely before repositioning.
Maintenance
Your vacuum cleaner is manufactured to withstand normal day-to-day use, but an occasional wipe over with a
damp cloth will help maintain its good looks. Abrasive cleaners should NOT be used.

U S E R ’ S G U I D E
4
U S E R ’ S G U I D E
Use the Bristle Brush
(Small Brush) for
carpet, and for delicate
furniture surfaces.
Use the
Multi-sized (Inflatable) Nozzles
for inflating objects such as
inflatable beds, chairs, balls,
etc. Refer to blowing function.
The floor
squeegee is great
for cleaning up
wet spills on hard
surfaces.
Use the Small Suction
Nozzle for hard-to-
reach places, carpet,
and upholstery.
Accessories
Use the Adjustable (Combined) Crevice Brush for narrow spaces such as window tracks,
behind the sofa, the carpet along the baseboard edge, and tight places inside the car.
7
1. Exhaust Cover
2. Rear Cover
3. Handle
4. Auto Cord Rewinder
5. Speed Control Board
6. Power Switch
7. Inlet Port
8. Flexible Hose
9. Curved Tube
10. Telescopic (Extension)
Handle
11. Standard Head (Double
Usage Brush)
12. Attachment Holder
13. Pothook
14. HEPA Cover
15. HEPA Cover Clips
16. Universal Wheel
17. Water Tank
18. Air Flow Chamber
19. HEPA Filter
20. Multi-sized (Inflatable)
Nozzles
21. Bristle Brush (Small Brush)
22. Small Suction Nozzle
23. Adjustable (Combined)
Crevice Brush
24. Foam Filter
25. Blowing Function
26. Squeegee
Optional Items
27. Strainer for Water Tank
28. Stain Remover Kit
29. Super Extendable
Extension Vacuum Hose
30. Power Head
Components
20
28
13
OPTIONAL ITEMS
14 15 16
1917
21 22 23
Standard Head (Double Usage) Brush
This double usage brush can be used for cleaning both carpet
and hard floors. For carpet, adjust the levers on the nozzle to
lower the brush. Adjust the levers to lock the floor brush in
the up position for hard floors.
Turning off the machine
Press the power switch, pull out the plug from the socket, rewind
the power cord by pressing the rewinder switch.
12
Note: This vacuum cleaner can suck up small wet spills such as melted ice cream, cereal and milk, and
even broken eggs. However, this vacuum cleaner is not designed to suck up large amount of liquids.
Blowing Function - for using the multi-sized (inflatable) nozzles
and Stain Remover Kit
Insert the flexible hose into the exhaust opening and turn on the
switch. Refer to figure.
Press the power button and select the desired speed, and use the
vacuum cleaner as a blower.
24
24
18
25
27 29 30
The Power Head is recommended
for deep cleaning and restoring
carpets and larger surfaces.
Its pivotal joints provide
excellent maneuverability.
Optional Items
The Strainer is specially
designed to trap large
pieces of debris when the
water tank is being emptied
down the drain.
26

U S E R ’ S G U I D E
6
U S E R ’ S G U I D E
5
After opening the rear cover, take out the air flow chamber with
foam filter, by pulling it up. Refer to the figure.
Place the air flow chamber back into the machine once water
tank has been filled with water.
Make sure that the air flow chamber is sitting in the machine
properly.
Caution: To avoid breaking of rear cover, please follow
instructions below while opening and closing.
Clip in the rear cover into main unit as per attached picture.
Add about 17 ounces (0.5 liters) of water to Water Level Line, which is the
lower line marked on the water tank, refer to the figure.
Wa r ning: Do not operate H2O Va c
®
Tu r b o
T M
without water in the water tank.
This vacuum cleaner uses advanced water filtration technology so that dirt and
dust are forced through a pool of water and trapped in the water.
Without water all the dirt will accumulate on the foam filter located inside the
ai r flow chamber and the suction power will be significantly affe ct e d .
Never fill the water above the “Water Level Line” before vacuuming.
The “Maximum Dirt Level” takes into account the combination of the initial water
fill, plus all accumulated dirt, dust and small wet spills during a normal
vacuuming session. Check the accumulation of dirt inside the water tank
occasionally during vacuuming to avoid exceeding the “Maximum Dirt Level”
line marked on the tank.
Startup and Speed Control
Plug in the power cord, and press the power switch to startup the
machine. IMPORTANT: Do not pull out the power cord past the
red tape mark. Press the speed switch on the big handle to
control the speed. There are 4 different speeds.
Attach the telescopic (extension) handle to the curved tube at
the end of the flexible hose and make sure they are firmly
secured.
Press the control button to adjust the length of the telescopic
(extension) handle. The telescopic (extension) handle will
automatically lock in place once the button is released.
Attach the standard head attachments as needed to the
telescopic (extension) handle.
Open the rear cover according to the directions indicated in the
figure.
Operating Instructions
Close the rear cover and gently push it down to secure it in place.
Do not hit or force the cover to close. Applying extra pressure can
break the rear cover.
Plug flexible hose into vacuum.
Suction Power Control on the Handle
To control the suction power, adjust the button on the curved tube.
CLOSED for full suction power. OPEN to reduce the suction power
and to stop large objects from getting stuck in the tube.
You can also adjust the suction power by pressing the speed switch.
For more suction power select higher speed and vice versa.
MAX Dirt
Level
Water
Level
FAILURE TO FOLLOW THESE WARNINGS MAY CAUSE DAMAGE TO THE ELECTRICAL PA R TS OF
THE VACUUM AND/OR THE SURFACE OF YOUR FLOOR AND WILL VOID ANY WARRANTIES ON
THE PRODUCT.
FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN ELECTRICAL SHOCK, FIRE,
DAMAGE TO THE PROPERTY OR SERIOUS PERSONAL INJURY AND EVEN DEATH.