The Retro Family JSY-FP-01A User manual

Troubleshooting –
In case of trouble with the unit, please look through this chart and see if
you can solve the problem by yourself before calling the Service Center –
PROBLEM
CAUSE
SOLUTION
WHOLE UNIT
Power does not come
on when the power
switch is pressed
Unit is Unplugged
Connect the unit to the
power adaptor supplied
with the product
No sound comes out of
the speakers
The volume is turned down to
low level.
The input selector does not
match the playback/source
Adjust the volume.
Re-select the desired
input source.
The Sound is noisy
The unit is too close to a TV
Set or another such device
Turn off the TV or other
appliance or re-locate the
Jukebox device
TUNER
Cannot listen to any
station or signal
appears weak
The station is not tuned-in
properly.
A TV set is being used nearby
and is interfering with the
radio reception
Tune-in the desired
station properly.
Turn-Off the interfering
TV set.
The sound is distorted.
The antenna is not oriented
properly
Re-orient the antenna
until the reception
improves
Unit Specifications –
Speaker –
Output Power: 2 Watts x 2
Impedance – 4 Ohms
Input Power: Max 3 Watts
radio frequency：FM 87.5 - 108Mhz
General --- Power: AC ADAPTOR INPUT: AC100V-240V / 50/60Hz
OUTPUT: DC 9V 1.0A
Power Consumption: 9Watts
Unit Dimension (W*H*D): 305mm X 423mm X156 mm (approx)
Package Contents
•FM Vintage USB.SD Jukebox
•Power Adaptor . AUX Cable
•Instruction Manual
12
OPERATING INSTRUCTIONS
JSY-FP-01A
FM/USB/SD/BT/AUX/LINE OUT
DINERS JUKEBOXES

IMPORTANT SAFETY INSTRUCTIONS
1. Read Instructions – All the safety and operating instructions should be read before the
product is operated.
2. Retain Instructions – The safety and operating instructions should be retained for future
reference.
3. Heed Warnings – All warnings on the product and in the operating instructions should be
followed.
4. Follow all instructions – All operating and user instructions must be followed.
5. Cleaning – Unplug this product from the wall electric socket before cleaning. Do not use
liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
6. Attachments – Do not use attachments not recommended by the product manufacturer as
they may cause hazards.
7. Water & Moisture – Do no use this product near water – For example, near Bath tub, wash
bowl, kitchen sink or laundry tub, or near swimming pool etc.
8. Do not place this product on an unstable stand, tripod, bracket or table.
9. Ventilation –Slots and openings in the cabinet are provided for ventilation, to ensure
reliable operation of the product and to protect it from overheating. These openings must
not be blocked or covered. The openings should never be blocked by placing the product on
a bed, sofa, rug, or similar surface. This product should not be placed in a built-in
installation such as a bookcase or rack unless proper ventilation is provided or the
manufacturer’s instructions have been adhered to.
10. Power Source – This product should be operated nly from the type of power source
indicated on the marking label. If you are not sure of the type of power supply to your home,
consult your product dealer or local power company.
11. Power Cord Protection – Power supply cords should be routed so that they are not likely to
be walked on or by items placed upon or against them, paying particular attention to cords
at plugs, convenience receptacles, and the point where they exit from the product.
12. Lightning – For added protection for this product, during a lightning storm or when it is left
unattended and unused for long period of time, unplug it from the wall outlet. This will
prevent damage to the product due to lightning and power-line surges.
13. Overloading – Do not overload the wall electric socket, extension cords as this can result in
a risk of fire or electric shock.
14. Do not attempt to service this product yourself as opening or removing covers may expose
you to dangerous voltage or other hazards. Refer all servicing to qualified service
personnel.
15. The product should be placed away from heat sources such as radiators, stoves or other
products (including amplifiers) that produce Heat.
2
Precautions – Safety Information –
CAUTION:
1. Use of controls and adjustments or performance of procedures other than those
specified here, may result in hazardous radiation exposure.
2. If this product develops trouble, contact a qualified service center, and do not use the
product in a defective state.
See Markings on the back of the unit –
CAUTION:
To prevent electric shock, match wide blade of plug to wide slot, fully
insert.
11

Hang a wall to operating instructions
1）"FM can antenna" be used is put in the best position, listening to FM radio
show the best effect.
2）If you need to hang on the wall,For example, USES the appropriate screw
(about KA4x16MM)，Choose to suit the metope of height，Choose a suitable
distance measuring tool, to determine the location of the screws.
3）Preparation work finished, the machine can be hung on the wall.
10
The ac adapter power supply
3
Wet hand operation is prohibited
Baby unplug the power adapter plug is prohibited
Suitable location on the wall
FM Antenna

Description of Parts
4
LINE OUT
Inserted the audio cable a jukebox "LINE OUT" jack, audio signal through the connection to an
external amplifier device through the left/right channel.
After the connection is successful, through the external power amplifier plays music
9
1.You have the option to use the line out ports
to connect an external amplifier device, and the
option to connect your own external power
amplifier speakers.
2.If you don't need external power amplifier,
please remove cable, can through the jukebox
play music.
LINE cable(plug Ø3.5MM)
Your, power amplifier with the speaker
1）Remote Control
2）LCD Display
3）Light switch（ON/OFF)
4）Song list stents and browse the panel
5）Digital audo player name plate panel
6）Speaker L+R
7）AUX IN
8）LINE OUT
9）DC input socket (power adaptor socket)

LISTENING TO AUX-IN
1. Insert the provided Aux-in cable into the Aux-in Jack, the unit will immediately goes into
Aux-in mode. The Led display will indicate “AUX”.
2. Use the controls on your Aux-in audio source to select your desire songs.
Note:Does not need external devices music, please pull out the auxiliary cable.
8
FUNCTIONS ON THE REMOTE CONTROL
5
AUX cable(plug Ø3.5MM)
Your mobile device
1. Mode: press to change the mode of playback, choose from USB or SD (SD/
card).
2. Next: press to go to the next track.
3. F.F: fast forward, press to fast forward through a track. You can then press the
playback button to start playback.
4. Back: press to go back one track.
5. F.B: fast back: press to rewind back through a track. You can then press the
play button to start playback.
6. Random: press to playback in no particular order.
7. Program: Allows you to program only particular songs of your choice to
playback from your music source.
8. Play/pause button: press to play or pause a track.
9. Stop button: press to stop a track.
10. F+10: press to go forwards 10 tracks.
11. F-10: press to go back 10 previous tracks.
12. Repeat: press to replay one particular song.
Press the "REP" 1, repeat this song.Press the "REP" twice, ,repeat all of the al
bum, Led display will show "all", repeat button to exit the repeat mode (represe
ntative will not be displayed in the LCD screen).

Digital audio player control panel
Listening to the Radio –
1. Press “POWER” button to choose “FM” Mode（Long press for 3 seconds after power off）.
2. Press “Auto” it would search for stations automatically and also search memory stations.
3. Press"Prest +" button, select FM radio programs can be stored.
4. Manual Tuning – Press the “NEXT/TUNER+” or “PREV/TUNER-“, it will increase or decrease 0.1
MHz respectively for FM and . Press and hold the “NEXT/TUNER+” or “PREV/TUNER-“ for 3
seconds. The device will automatically start and search the frequencies for the next strong station o
r stop on that .
5. To select the volume level, press "VOL -" To reduce the volume.
6. To select the volume level, press "VOL +" raise the volume.
7. "FM can antenna" be used is put in the best position, listening to FM radio show
the best effect.(In the 10 page).
6
LISTENING TO USB/SD card
1. Press the Power/Mode button until the Led Display indicate “USb” or “CArd”. If not USB or
SD card, the led display will indicate “no”. Once the USB flash/SD card insert into the USB
or SD card slot, it will automatically start playback. Press “Prev” or “Next” to select the
previous or next track. （Long press for 3 seconds after power off）.
2. To select repeat one song, select the song that you want to repeat. Press “RDM” once, the
Led display will show “1” on the bottom right corner.
3. Press the "RDM" repeat all the albums，Led display will show "all" in the same corner.
4. Press “RDM” one more time to select Random. The Led display will show “RDM” on the
top.
5. Press “Stop” button to stop playback.
6. To select the volume level, press "VOL -" To reduce the volume.
7. To select the volume level, press "VOL +" raise the volume.
Bluetooth Operation
1. The "mode" switch function switch to BT, displays "BT".
（Long press for 3 seconds after power off）.
2. Pairing bluetooth device appear "jukebox", can be connected, once complete matching,
bluetooth device can play music.
3. In place of songs, and then choose the songs you want, your bluetooth device
operation.
4. The volume adjustment, adjust the "volume“ control on your demand.
.PLAY/PAUSE :Press “PLAY” button, it plays, Press again, it is “PAUSE”;
. : Press, select upward song;
.VOL - : Press "VOL -" (it can Press continuously or Press all the time). To reduce the volume
or can't hear voice.
.:Press, select downward song;
.VOL+ : Press "VOL +"(it can press continuously or press all the time), it is will be gradually
transferred to the loud or maximum.）
Note:* If the volume seems to be too low, adjust the rotary volume control on the front panel.
*if the no pairing can turn "Mode" the " BT " button, and then reopen, then after pairing.
7
1）USB Slot
2）SD Card Slot
3）Next/VOL+/Tuner+
4）Repeat/RDM/Prest+
5）Prev/VOL-/Tuner-
6）Stop
7）Play/Pause/Auto
8）Power/Mode