THOMSON CALI-ON 520008 User manual

www.mythomson.com
V1
EN Smart WiFi Thermostat
For electric radiators
520008
CALI-ON
24V
Solaire
OPTION
4m / 200kg Batterie
de secours
OPTION
GarantieGarantie
ans
Google Play
Free available on
Available on the
Google Play
Free available on
Available on the

EN 2
SMART WIFI THERMOSTAT
TABLE OF CONTENTS
A. SAFETY INSTRUCTIONS 5
1. OPERATING PRECAUTIONS 5
2. WARNING 5
2. MAINTENANCE AND CLEANING 5
3. RECYCLING 5
B. PRODUCT DESCRIPTION 6
1. KIT CONTENTS 6
2. DESCRIPTION 6
C. INSTALLATION 7
1. INSTALLATION 7
2. TEMPERATURE SENSOR CONNECTION 7
3. INSTALLING THE HEATING MODULE 7
4. CONNECTION AND USE FROM THE MOBILE APP 8
4.1. INSTALLING THE APP AND PAIRING THE PRODUCT. 8
4.2. PAIRING THE TEMPERATURE SENSOR 9
4.3. PAIRING YOUR CALI-ON MODULE FOR ELECTRIC RADIATOR 11
4.4. ADDING THE THERMOSTAT 12

3ENEN 3
D. USING THE PRODUCT 14
1. TEMPERATURE SENSOR 14
2. THERMOSTAT 14
2.1. SETTINGS. 14
2.2. PROGRAMMING 14
2.3. VOICE ASSISTANT COMPATIBILITY 15
3. ELECTRICITY CONSUMPTION MONITORING 15
E. TECHNICAL AND LEGAL INFORMATION 16
1. TECHNICAL CHARACTERISTICS 16
2. WARRANTY 16
3. ASSISTANCE AND ADVICE 16
4. PRODUCT RETURNS - AFTER SALES SERVICE 16
5. DECLARATION OF CONFORMITY 17

5EN
SMART WIFI THERMOSTAT
A - SAFETY INSTRUCTIONS
1 - OPERATING PRECAUTIONS
• Read this entire manual before installing.
• Do not allow children to operate the product.
• Do not install this product outside
2 - WARNING
This product was designed to measure temperature
and regulate your electric heating. Any other use
of the device is not covered by the warranty or
technical support. The company cannot be held
liable for any use that does not comply with the
instructions in this manual and which causes
damage. Children should be supervised to make
sure that they do not play with the device.
2 - MAINTENANCE AND CLEANING
• The outer case can be cleaned periodically.
• Disconnect from the mains before carrying out
any work on the device.
• Do not use abrasive substances, substances
containing alcohol, thinners or other ammable
substances.
• Do not spray any products directly onto the
unit.
3 - RECYCLING
This logo denotes that devices no
longer in use should not be disposed of
as household waste. They are likely to
contain hazardous substances that are
dangerous to both health and the
environment. Return the equipment to
your local distributor or use the recycling collection
service provided by your local council.
Pour en savoir plus :
www.quefairedemesdechets.fr

6
SMART WIFI THERMOSTAT
EN
B - PRODUCT DESCRIPTION
The Thomson Cali-On thermostat lets you control your home’s temperature from your smartphone (Apple and
Android). It has an LCD screen.
Easy to install and use, it will quickly t into your lifestyle. You can congure weekly programmes from the app.
1 - KIT CONTENTS
2 - DESCRIPTION
3x 4
1x 2 2x 4
1Control module for electric heating
2Wall plugs for attaching the module to the wall
3screws for attaching the module to the wall
1Power indicator light
2Pairing button
3Front plastic cover to access the
mounting holes
4Back plastic cover to access the
connection terminal block
4Temperature sensor
5USB-MicroUSB cable
6USB charger
1
2
3
4
1+ button
2LCD screen
3- button
4RESET button
5MicroUSB port
3 5 5421
6x 1
4x 1 5x 1

7EN
SMART WIFI THERMOSTAT
C - INSTALLATION
1 - INSTALLATION
Your Cali-ON module temperature sensor must be
within WiFi range of your router in order to function. If
it is installed outside WiFi range, you should install a
WiFi repeater to boost the signal.
2 - TEMPERATURE SENSOR CONNECTION
3 - INSTALLING THE HEATING MODULE
After disconnecting the electrical supply, remove the
radiator from the wall for easier access.
To do the electrical connection, remove the plastic
cover at the back as well as the cable tie.
N_IN: mains neutral input
L_OUT: phase output to the radiator
L_IN: mains phase input
Mains power supply 230V/50Hz
UDGLDWHXU
DOLPHQWDWLRQ
VHFWHXU
9+]
HQWUpH
1
VRUWLH
/
HQWUpH
/
1
1
3
3

8
SMART WIFI THERMOSTAT
EN
C - INSTALLATION
Once the electrical connection has been done,
replace the plastic cover at the back and attach the
receiver to the wall using the wall plugs and screws
included. The xings provided are suitable only for
masonry walls.
Ensure that the top 3cm of the receiver is visible to
avoid blocking the radio connection.
35mm
ø 4mm
3cm
After having attached the receiver to the wall, the
radiator can be reassembled.
4- CONNECTION AND USE FROM THE
MOBILE APP
This product only works with a 2.4Ghz frequency.
During pairing, make sure your smartphone is
connected on that specic frequency. If you are not
sure, check with your Internet service provider.
4.1. Installing the app and pairing the product
Once the temperature sensor is connected, follow
the instructions below to pair it.
Download the Thomson At Home app from the Play
Store or App store.
At Home
Launch the app and log in if you already have an
account. If you do not, press INSCRIPTION (Register)
and follow the app guide

9EN
SMART WIFI THERMOSTAT
C - INSTALLATION
Once you have entered your email address and
password, you will receive a conrmation code
in your inbox. Enter this code to nalise the
registration. Note that you might nd this email in
your spam folder.
4.2. Pairing the temperature sensor
To begin pairing, press the menu at the top left
and select AJOUTER UN PRODUIT (Add a product).
Ensure that your phone is connected to the 2.4 GHz
WiFi network of your ADSL router
Select the product you wish to pair and select the
CALI-TEMP temperature sensor.
Make sure the temperature sensor is plugged in and
in pairing mode. In pairing mode, the temperature
sensor’s screen should be ashing. If this is not the
case, press and hold the “reset” button at the rear
of the temperature sensor for 3 seconds.
Next, press COMMENCER LA CONFIGURATION
(Start setup).

EN 10
SMART WIFI THERMOSTAT
C - INSTALLATION
Select your 2.4 GHz WiFi network (note: your
smartphone must be connected to the WiFi network
to which the module will be connected), enter your
network password and press SUIVANT (Next).
Please wait while the pairing procedure takes
place. This stage can last several minutes.
Your Thomson temperature sensor has been paired
successfully. You can name it and press TERMINER
(Finish).
Your temperature sensor is now operational and
appears in your dashboard. Wait until the icons
change from grey to black (indicating conrmation
of connection to your WiFi network). Your
temperature sensor is now ready to use.

11 ENEN
SMART WIFI THERMOSTAT
C - INSTALLATION
You can view the temperature and humidity level
from your smartphone.
4.3. Pairing your Cali-On module for electric
radiator
To begin pairing, press the menu at the top left
and select AJOUTER UN PRODUIT (Add a product).
Ensure that your phone is connected to the 2.4 GHz
WiFi network of your ADSL router
Select the product you wish to pair and select the
Cali-On module.
Make sure that the Cali-On module is plugged in
and in pairing mode. In pairing mode, the light
on the module blinks rapidly. If this is not the case,
press and hold the central button to put the module
in pairing mode.
Next, press COMMENCER LA CONFIGURATION
(Start setup).
Select your 2.4 GHz WiFi network (N.B. your
smartphone must be connected to the WiFi network
to which the module will be connected), enter your
network password and press SUIVANT (Next).

EN 12
SMART WIFI THERMOSTAT
Please wait while the pairing procedure takes place.
This stage can last several minutes.
Your Thomson Cali-On module has been successfully
paired. You can name it and press TERMINER (Finish).
Your Cali-On module is now operational and
appears in your dashboard. Wait until the icons
change from grey to black (indicating conrmation
of connection to your WiFi network). You can now
use your Cali-On module and create a thermostat.
4.4. Adding the thermostat
Before adding a thermostat, you must have
connected a temperature sensor and one or more
heating modules
Press the menu at the top left and select AJOUTER
UN PRODUIT (Add a product).
C - INSTALLATION

13 ENEN
SMART WIFI THERMOSTAT
Select the product you wish to pair and select
Thermostat.
Make sure the temperature sensor and the heating
module(s) are plugged in
1. Select the temperature sensor you wish to use
2. Select the heating module(s) you wish to use
3. Select the home’s typical inertia
4. Name the thermostat
Press enregistrer (save) to nish saving your
thermostat.
Your thermostat is now operational and appears in
your dashboard. You can use your thermostat to set
the temperature in your room and program it for
added comfort and savings.
C - INSTALLATION

EN 14
SMART WIFI THERMOSTAT
D - USING THE PRODUCT
1 - THE TEMPERATURE SENSOR
You can view the temperature and humidity level
from your smartphone.
You can check the temperature from your Google
Home and Alexa voice assistants:
- Ask how warm the room is
- Alexa/OK Google, what’s the temperature in
the living room?
2 - THERMOSTAT
Press the “Plus” (More) button for settings and
programming
2.1. Settings
• The temperature can also be changed for each
mode
• You can add/remove modules and change the
initial setup
2.2. Programming
• You can change the weekly programme, including
applying settings from another day to simplify
programming
• You can add/remove time slots for more exibility

15 ENEN
SMART WIFI THERMOSTAT
D - USING THE PRODUCT
You can directly override the programming using
the +/- buttons on the temperature sensor and
impose this setpoint temperature until the next
programmed time slot.
2.3. Voice assistant compatibility
Your new smart thermostat is compatible with both
Google Home and Alexa voice assistants. Refer to
your voice assistant’s instructions to connect your
thermostat.
Once connected, you can:
- Turn the thermostat on and off
- Alexa, turn on the thermostat
- Ok Google, turn off the thermostat
- Ask the assistant to increase the temperature
- Alexa, increase the temperature by 1°C
- Ok Google, lower the temperature by 1°C
- Ask the assistant to set a temperature
- Alexa, set the temperature to 20°C
- Ok Google, set the temperature to 20°C
3 - ELECTRICITY CONSUMPTION
MONITORING
You can monitor your heating’s electricity
consumption per day, month or year and
compare it from one year to the next. Perfect for
making energy savings.

16
SMART WIFI THERMOSTAT
EN
1 - TECHNICAL CHARACTERISTICS
TEMPERATURE SENSOR
T° measurement unit and range: °C or °F, from 0 to
38°C (from 32 to 100 °F)
Humidity measurement range: from 20% to 90%
Buttons on the front panel: Changing the set point
temperature
Low battery detection: Information displayed on the
sensor screen and transmitted by radio signal
Measurement frequency: Every minute
Screen:
- Overall size: 35 x 35 mm
- Useful size: 30 x 30 mm
- Segment screen
- Segment visualisation
USB power supply: Power supply of 5V/100 mA
minimum
Use: Indoors only
Operating T°: 0°/+40°C
Storage T°: -20°C/+70°C
Installation: Ideally placed on a piece of furniture in
the middle of the room
Colour: Black
Protection rating: IP20
Weight: 58 g
CALI-ON HEATING MODULE
Max. power of the controlled device: 3680 W - 16 A
Features: ON/OFF radiator control
Connection: Connect between the mains power
supply and the radiator.
Cable section: up to 2.5 mm2
Use: Indoors only
Operating T°: 0 °C/+40 °C
Storage temperature: -20 °C/+70 °C
Power supply: 230 Vac/50 Hz
Average consumption: < 1 W
Installation: Wall-mounting
Colour: Grey/Pure white
Protection rating: IP20
Weight: 80 g
2 - WARRANTY
This product is guaranteed for parts and labour
for 2 years from the date of purchase. Proof of
purchase must be retained for the duration of the
warranty period.
The warranty does not cover damage caused by
knocks or accidents.
3 - HELP AND SUGGESTIONS
• If, despite the care we have taken in designing
our products and drafting these instructions, you
do encounter difculties when installing your
product or you have any questions, we urge you
to contact one of our specialists who will be glad
to help.
• If you encounter operating problems during
the installation or a few days afterwards,
it is essential that you are in front of your
installation when contacting us, so that one of
our technicians can diagnose the source of the
problem, as it will probably be the result of a
setting that is incorrect or an installation that is
not to specication. If the problem is caused by
the product itself, the technician will give you an
RMA number so that you can return the unit to
the shop.
Without this RMA number, the shop may refuse to
exchange your product.
Contact our after sales service team technicians:
0,35 € / min
0 892 701 369
Monday to Friday, 9pm to 12pm, and 2pm to 6pm.
Alternatively, talk to our chatbot free of charge:
https://www.avidsen.com/chatbot-thomson.html
4 - PRODUCT RETURNS - AFTER SALES
SERVICE
If, despite the care we have taken in designing and
manufacturing your product, it needs to be returned to
our customer service centre, you can check the progress
of the work on our website at the following address:
https://www.avidsen.com/nos-services
E - TECHNICAL AND LEGAL INFORMATION

17 EN
SMART WIFI THERMOSTAT
E - TECHNICAL AND LEGAL INFORMATION
5 - DECLARATION OF CONFORMITY
Avidsen declares that the above product complies
with the RED 2014/53/EU directive. Its compliance
has been assessed pursuant to the applicable
standards in force:
Temperature sensor
EN 62479
EN 62368
EN 301 489-1 V2.1.1
EN 301 489-3 V2.1.1
EN 300 220-1 V3.1.1
EN 300 220-2 V3.1.1
EN 300 328 V2.2.2
Mains adaptor
EN 62368
EN 55032
EN 55035
EN 61000-3-2
EN 61000-3-3
EN 50563
EN 50581
EN 62321
Cali-On module
EN 60335-1:2012 + A11:2014 + A13: 2017
EN 62311:2008
EN 301 489-1 V2.1.1
EN 301 489-17 V3.1.1
EN 300 328 V2.1.1
Tours, 22/03/2021
Alexandre Chaverot, CEO

Avidsen
19 avenue Marcel Dassault
ZAC des Deux Lions - 37200 Tours - France