Threshold Conway tgavc65-16 User manual

>> Assembly instructions

Conway Media Stand

Style # TGAVC65-16

D C-item # 249-10-0022

Congratulations on your latest Target purchase.

Now what? Don’t start sweating over this box of parts. This will be easy. We did the hard work for you.

All you need to do is follow our simple instructions and you’ll be on your way to transforming your room in no time.

Good luck – though we’re confident you won’t need it.

before you begin

1. Check for damaged or missing parts. Call 1-855-MYTGTHOME (855-698-4846) to order missing supplies.

2. Use the carton as a work surface to prevent product damage during assembly.

3. Gather all tools prior to assembly.

tool needed (only hex wrench included)

For tipping restraint hardware kit only.

hillips

screwdriver

Hex wrench

hardware

(H4) x 2

tipping restraint hardware kit

(inside plastic bag)

Spare hardware

(H1) x 20

1/4” x 15 mm bolt

(H3) x 1

hex wrench

(H2) x 4

1/4” x 25 mm bolt

exploded diagra

ITEM DESCRI TION QTY

A Top panel 1

B Left side frame 1

C Right side frame 1

D Middle frame 1

E Back support 2

F Shelf 2

NOTE: DO NOT fully tighten all bolts

until you finish assembling all parts.

Once assembled, go back and fully

tighten all bolts. This will make the

assembly easier.

step 1: attach the iddle fra e

1.1. Align and attach the middle frame (D) to the top panel (A) using two 15 mm bolts (H1).

(H1) x 2

1/4” x 15 mm bolt

(H3) x 1

hex wrench

The threaded sockets face back

of the unit with the flat edges

step 2: attach the shelves

2.1. Align and attach the shelves (F) to the rails of the middle frame (D).

The threaded inserts fit the mounting holes

NOTE: DO NOT fully tighten all bolts

until you finish assembling all parts.

Once assembled, go back and fully

tighten all bolts. This will make the

assembly easier.

step 3: fasten the shelves

3.1. Fasten the shelves (F) to the rails of the middle frame (D) using four 25 mm bolts (H2).

(H3) x 1

hex wrench

(H2) x 4

1/4” x 25 mm bolt

step 4: attach the side fra es

4.1. Align and attach the side frames (B and C) to the top panel (A) and the shelves (F).

The threaded sockets face back of the unit

NOTE: DO NOT fully tighten all bolts

until you finish assembling all parts.

Once assembled, go back and fully

tighten all bolts. This will make the

assembly easier.

step 5: fasten the side fra es

5.1. Fasten the side frames (B and C) to the top panel (A) and the shelves (F) using the 15 mm bolts (H1).

(H3) x 1

hex wrench

(H1) x 12

1/4” x 15 mm bolt

NOTE: DO NOT fully tighten all bolts

until you finish assembling all parts.

Once assembled, go back and fully

tighten all bolts. This will make the

assembly easier.

step 6: attach the back supports

(H3) x 1

hex wrench

6.1. Ask for assistance to stand the assembled unit upright.

6.2. Align and attach the back supports (E) to the frames (B, C and D) using six 15 mm bolts (H1).

E E

B C D

(H1) x 6

1/4” x 15 mm bolt

(H4) x 2

tipping restraint hardware kit

(inside plastic bag)

step 7: attach tip-over restraint

Wall

Metal bracket Long screw

Wooden stud

Tools required: hillips screwdriver, stud finder, tape measure, pencil, power drill and 1/8” drill bit (not provided).

Short screw Nylon strap

Wall

Floor leveler

7.1. Adjust the pre-attached floor levelers to level the unit against a wall.

7.2. Follow the instructions printed on plastic bag containing tipping restraint hardware to attach tip-over restraint between the unit and the wall.

NOTE: You must use this tipping restraint to attach this unit to the wall, to prevent accidents and / or injures.

Care and Maintenance

 Use a soft, clean cloth that will not scratch the surface when dusting.

 Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.

 Using solvents of any kind on your furniture may damage the finish.

 Never use water to clean your furniture as it may cause damage to the finish.

 Always use coasters under beverage glasses and flowerpots.

 Liquid spills should be removed immediately. Using a soft, clean cloth, blot the spill gently. Avoid rubbing.

 Always use protective pads under hot dishes and plates. Heat can cause chemical changes that may create spotting within the furniture finish.

 Stains or marks from crayons or ink markers will be difficult to remove.

 In the event that your furniture is stained or otherwise damaged during use, we recommend that you call a professional to repair your furniture.

 Check bolts/screws and nuts periodically and tighten them if necessary.

Further Advice about Wood Furniture Care

It is best to keep your furniture in a climate-controlled environment. Extreme temperature and humidity changes can cause fading, warping, shrinking and

splitting of wood. It is advised to keep furniture away from direct sunlight as sun may damage the finish.

roper care and cleaning at home will extend the life of your purchase. Following these important and helpful tips will enhance your furniture as it ages.

We hope you enjoy your purchase for many years.

Thank you for your purchase!

QUALITY GUARANTEE

We are confident that you will be delighted with your Whalen Furniture purchase.

Should this product be defective in workmanship or materials or fail under normal use, we will repair or replace it for up to one (1) year from date of purchase.

Every Whalen Furniture product is designed to meet your highest expectations. We guarantee that you will immediately see the value of our fine furniture.

This warranty gives you specific legal rights and you may also have other rights which vary from state to state or province to province.

Customer Service: 1-855-MYTGTHOME (855-698-4846)

8:30 a.m. - 4:30 p.m., ST, Monday to Friday

www.whalenfurniture.co

M A X I M U M R E C O M M E N D E D W E I G H T L O AD S

MAXIMUM LOAD 22.7 kg / 50 lb

FITS U TO MOST 149.9 cm / 59 in

DIAGONAL FLAT- ANEL TVS

MAXIMUM LOAD 36.3 kg / 80 lb

MANUFACTURER: Whalen Furniture Manufacturing

CATALOG: Conway Media Stand

MODEL # TGAVC65-16

USE WITH TELEVISIONS

WEIGHING 80 LBS (36.3 KG) OR LESS. USE WITH HEAVIER TELEVISIONS MAY RESULT IN INSTABILITY CAUSING TI

OVER RESULTING IN DEATH OR SERIOUS INJURY.

The axi u reco ended weight allowance is 36.3 kg / 80 lb for top panel.

The axi u reco ended weight allowance is 22.7 kg / 50 lb for shelves.

Death or serious injury may occur when children climb on audio and/or video equipment furniture. A remote control or toys

placed on the furnishing may encourage a child to climb on the furnishing and as a result may tip over onto the child.

NEVER allow children to climb or play with the TV or furnishing supporting the TV.

NEVER place toys, food, remote, etc. on top of the TV or TV furnishing.

ALWAYS use either the safety hardware as instructed or other wall anchoring device.

Relocating audio and/or video equipment to furniture not specifically designed to support audio and/or video equipment

may result in death or serious injury due to furniture collapse or over turning onto a child.

NEVER place a TV on furniture that is not intended to support a TV.

NEVER exceed the maximum size and weight of the TV shown in the instructions.

Be sure to refer to the TV warning label as shown in the instructions.

Overloading drawers and shelves may result in furniture that can break or sag, or tip-over which may result in injury.

NEVER exceed the weight limits shown in the instructions.

lace the heavier items on lower shelves as far back from the front as possible.

Load the bottom surfaces first to avoid top-heavy furniture.

Moving furniture that is not designed to be moved or equipped with casters may result in injury or damage to furnishings or

personal property.

ALWAYS unload shelves and drawers, starting with the top surfaces, before moving.

NEVER push or pull furniture on carpet. Have a friend help lift properly to move and/or reposition it.

DO NOT use the unit as a seating surface.

This unit is not intended for use with CRT TVs. The top surface maximum weight capacity is 80 lbs. (36.3 kg) and maximum load 59

in. (149.9cm) diagonal flat-panel TV. The shelf maximum recommended weight allowance is 50 lbs. (22.7 kg). Use with

heavier televisions may result in instability causing tip over resulting in death or serious injury.

 Unit must be placed on a level surface or leveled with included hardware (when applicable).

 Do not sit or stand on or allow children to climb, sit or stand on the assembled product.

 For safety reasons, it is imperative that this unit be mounted to the wall.

 Do not use without installing the tip restraint.

 Unit can tip over causing severe injury or death.

 Never open more than one drawer at a time.

 Do not exceed the recommended weight limits.

 Evenly distribute the weight on each level and always keep the heavier loads on the bottom.

 Before cutting, drilling or hammering into any wall or floor surface, verify the location of electrical,

plumbing and gas lines. Cutting may cause serious injury.

WARNING

Questions? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and D CI number ready when calling. Questions? Just call 1-855-MYTGTHOME (855-698-4846) for parts and service. For faster service, have the style number and D CI number ready when calling.

FURNITURE TIPPING RESTRAINT

YOUNG CHILDREN MAY BE INJURED BY TI ING FURNITURE AND YOU MUST USE THIS TI ING