Tikkers 10 series User manual

Thank you for choosing a Tikkers smart watch & ear bud gift set! This short guide will help you with the essentials, but please visit our website to

access full instructions, helpful videos, FAQs and more, all designed to help you get the best from your Tikkers smart watch.

IOS

ANDROID

INSTALL TIKKERS APP.

Search for Tikkers App to download onto your smart phone.

Alternatively, you can scan the appropriate QR code below.

CHARGING GUIDE

1. Open the charger case and place the watch head into the case.

2. Connect metal pins of the USB cable with metal point on reverse of the watch until

charging icon appears on screen.

3. Close the case and plug the USB into the port or plug.

4. Once a power charger is plugged in, the watch will be activated automatically.

5. Charge the watch when it displays low battery.

6. A 2 hour charge time is sufficient to fully charge your smart watch, please ensure you do

not exceed a 2 hour charge period.

Do not wear your smart watch whilst applying sprays or creams. Do not allow contact with any

corrosive agent e.g. paint, solvents or adhesives, as this may affect the finish of the smart watch.

Your smart watch is not suitable for swimming or showers. Do not immerse in water. Do not try

to replace or disassemble the battery.

SILICONE STRAP

To keep your silicone strap looking good, clean it regularly with mild soap and water to remove

any dirt, oils, lotions etc., ensuring the case of your smart watch does not get wet. When you are

not wearing your smart watch, we recommend you store it in the gift box received with purchase.

STEP COUNTER

Smart watches use multiaxis inertial sensors called accelerometers. These detect wrist movement

in order to measure steps. However, some wrist actions whilst standing or sitting can mimic the

arm movement of a step and can therefore falsely record steps. The step count recorded each day

should be used as a guide only.

IP68

Your watch is tested to IP68 standards. It can be exposed to water for up to 30 minutes to a

maximum depth of 1.5 Meters.

We do not recommend our watches for use in saltwater. Always rinse and dry your smart watch

after exposure to water.

SMART WATCH INSTRUCTIONS

CHARGING GUIDE

1. Insert charging cable into the charging port & connect to power supply.

2. The charging indicator light will illuminate red to show case is charging.

3. Allow to charge for around 60 minutes, the charging indicator light will be lluminated

continuously once fully charged.

4. Always take care not to exceed 60 minute charge time

5. To charge earbuds, place within the charge case, which will automatically charge them.

EAR BUD INSTRUCTIONS

SETTING UP

1. Remove ear buds from case once fully charged. The indicator of earpod-L flashes red

quickly and that of earpod-R flashes red slowly, meaning they are ready to pair!

2. Open Bluetooth connections within phone or tablet settings. Search "Tikkers" and select.

3. If the indicator flashes red and blue quickly, the ear buds are disconnected.

LISTENING TO MUSIC

1. Double tap earpod-L touch area to play previous song.

2. Double tap earpod-R touch area to play next song.

3. Triple tap earpod-L touch area to decrease the volume.

4. Triple tap earpod-R touch area to increase the volume.

Tikkers ear buds are limited to a volume of 85db for your protection.

PHONE CALLS

1. Quick tap touch area to answer call when in use.

2. Quick tap touch area again to end call.

3. Press for about 1.5 seconds to reject call.

VOICE CONTROL

1. Press for about 3 seconds to activate voice assistant.

• Clean product with a damp cloth & mild soap. • Not designed to be submerged in water, should this occur product will malfunction. • Avoid excessive twisting/turning of charging cable as this can cause

malfunction. • Contains no serviceable components. Do not attempt to open the ear buds or their casing as this may cause harm. • Keep away from strong magnetic fields to avoid interference.

Please follow these simple instructions to keep your watch & ear buds looking & sounding great!

OPERATION INTRODUCTION

1. To switch on, press and hold the touch button until display illuminates.

2. To switch off the watch, press the touch key repeatedly until ‘more’ icon shows on the

display and then long press to enter in ‘power off’, long press the touch key again.

3. You can press the touch key, or turn on gesture control in advanced settings of REFLEX

ACTIVE app and raise your hand to illuminate the screen.

CONNECTING BAND TO MOBILE PHONE

1. Enable bluetooth on your smart phone.

2. Open the REFLEX ACTIVE app on your smart phone.

3. Review and accept privacy policy.

4. Set your profile following the steps presented.

5. Set your goals following the steps presented.

6. To connect your watch, tap the green icon and select your watch from the list.

7. Tap OK to allow notifications to appear on your smartwatch.

Visit our SUPPORT section to view our video guide.

DISCONNECTING YOUR SMART WATCH & PHONE

1. Open the REFLEX ACTIVE app on your smart phone.

2. Tap disconnect device in settings.

3. Forget your device on your smart phones bluetooth settings.

Please retain this leaflet for future reference.

Do not attempt to replace the battery, open the device enclosure or disassemble your TIKKERS product. Doing so can result in a safety hazard • The integrated rechargeable battery cannot be removed or

replaced • Substances within TIKKERS batteries may harm the environment or cause injury if handled or disposed of improperly. In the unlikely event of contact with battery acid, thoroughly flush the

affected area with plenty of clean water and seek IMMEDIATE medical attention • When the battery is fully charged disconnect from charger, DO NOT exceed 2 hour charge time.

BATTERY WARNINGS

Quality and style are at the heart of what we do. Tikkers certifies this product is produced using premium materials and is fully tested before leaving our manufacturing centre.

Your product is guaranteed against any defective parts & construction for 2 years from the date of purchase. Your guarantee is only valid if you present your original receipt when returning the item.

This guarantee provides you with rights in addition to your consumer statutory rights and therefore does not limit your statutory rights. Please note this guarantee does not cover lenses, bands, straps

or bracelets, water penetration or batteries. Additionally, breakages caused by accident or maltreatment are not covered.

We hope you’ll love your watch, but if you do have any problems please contact us and we’ll guide you through the guarantee process.

GUARANTEE

The Tikkers App. is compatible on the following smart phones:

Android (version 4.4 and above)

Apple IOS (version 8.0 and above)

Please make sure the App. is the latest version and check for updates.

Bluetooth requirement 5.0. Bluetooth Range 10m

COMPATIBILITY

tikkers.co.uk/pages/privacy-policy

This smart watch is a Class A product. In a domestic environment, this product may cause radio interference. In which case the user may be required to take adequate measures • Ensure your smart

watch correctly engages with the charging contacts • Before each use, please check the product for damage, do not use if the product is damaged • This is not a toy, children should not play with this

product • Never attempt to open your smart watch, this may result in danger • Protect the product from strong impacts, vibrations, direct sunlight and dirt • Do not place heavy objects on the product

• Do not exert pressure on the product • Avoid strong magnetic fields e.g. loudspeakers • Salt and thermal water can lead to the corrosion of metal parts. Remove the product before using saunas as

the temperature difference can cause condensation • Do not operate the product near heat sources e.g. radiators or other devices emitting heat. Do not cover the product during operation or charging •

Never use the product on aeroplanes, in hospitals, service rooms, or near medical electronic systems. The wireless signals transmitted could impact the functionality of sensitive electronics • Do not use

your TIKKERS product if the display is cracked • Do not expose your TIKKERS product to extremely high or low temperatures • Do not use abrasive cleaners to clean your TIKKERS product • Remove your

TIKKERS product immediately if it feels warm or hot • Do not attempt to wear or operate your TIKKERS product whilst charging • Do not charge your TIKKERS product if wet • Do not check notifications or

other applications on the products display while driving or in other situations where distractions could be hazardous. Always be aware of your surroundings when using TIKKERS products and services

• Ensure your smart watch is removed at regular intervals for gentle cleaning.

In the case of material damage or personal injury caused by incorrect handling or non-compliance with the safety instructions, no liability can be accepted by TIKKERS. If you have any questions or

concerns, please contact us, you’ll find our contact details on this leaflet.

DEVICE WARNINGS

Manufactured by: Peers Hardy UK Ltd, Precision House, Starley Way, Birmingham Business Park, Bickenhill Lane, Solihull,B37 7GN, UK.

EU Address, Peers Hardy UK LTD, C/O Global E-commerce Experts, Rijnlanderweg 766, Unit H, 2132 NM, Hoofddorp, Netherlands.

JOIN THE TEAM ON SOCIAL!

TIKKERS.CO.UK

SUPPORT

Don’t forget to follow us on social media for lots of fun stuff! We’d love you to tag us in your

photos showing your new TIKKERS™ products!

Tikkers.Official Tikkers.Official

+44 (0) 121 524 1400 tikker[email protected]

Enjoy your music, but please stay safe & ensure you stay aware of your surroundings at all times. Do not use this product whilst driving or in other potentially dangerous situations. This product is not

a toy, not for use by children. These ear buds are a class B product. In a domestic environment, these ear buds may cause radio interference, in which case the user may be required to take adequate

measures.

EAR BUD SAFETY & WARNINGS

TIKKERS smart watches contain components that emit electromagnetic fields, with some of the models containing a magnetic charging dock, please be aware that these models contain magnets. These

electromagnetic fields and magnets may interfere with medical devices, such as pacemakers and implanted defibrillators. Please consult your doctor and medical device manufacturer if you use any

medical device before using a TIKKERS smart watch • The TIKKERS heart rate monitor is designed for recreational use only, it is not intended for any medical use such as diagnosing or monitoring any

medical conditions • The TIKKERS heart rate monitor periodically emits flashing lights, please consult your doctor before use if you have epilepsy or similar conditions. • The TIKKERS heart rate monitor

usually provides an accurate estimate of your heart rate, but the reading can be affected by factors such as fit of the smart watch, the physical characteristics of the wearer and the intensity of the

activity • Your TIKKERS smart watch will help calculate distances covered. Please consult a doctor before starting new exercise regimes • TIKKERS smart watches contain sensors to track your movement

to closely estimate your activity, sleep etc. These close estimations are not always fully accurate • Some wearers may suffer skin irritation if the smart watch is worn for prolonged periods, especially

if you suffer from sensitive skin or have allergies. If you notice any irritation you should remove your smart watch. To help prevent any irritation please ensure the smart watch is removed regularly