
User’s Guide 5581
E-19
Countdown Timer:
Countdown range: 100 minutes
Setting unit: 1 second
Start time setting range: 1 second to 100 minutes
Alarms: 5 Daily alarms; Hourly Time Signal
Double LED light: LED light for the face (Full auto LED light, Neon illuminator,
selectable illumination duration, afterglow)
LED backlight for the digital display (Full auto LED light, Super illuminator,
selectable illumination duration, afterglow)
Other: Battery power indicator; Power Saving; Button operation tone on/off
E-18
Specifications
Accuracy at normal temperature:
±
15 seconds a month
Timekeeping: Hour, minutes, seconds, p.m. (PM), year, month, day, day of the
week, alarm countdown
Time format: 12-hour and 24-hour
Calendar system: Full Auto-calendar pre-programmed from the year 2000 to
2099
Other: Home City code (can be assigned one of 48 city codes); Standard Time/
Daylight Saving Time (summer time)
World Time: 48 cities (31 time zones)
Other: Daylight Saving Time/Standard Time
Stopwatch:
Measuring unit: 1/100 second
Measuring capacity: 59'59.99"
Measuring modes: Elapsed time, split time, two finishes
E-17
Misaligned Hands
The analog hands may become misaligned as described below if the watch is
exposed to strong magnetism, impact, or other abnormal conditions.
xAnalog time and digital time are different from each other
If this happens, refer to “Hand Home Position Adjustment” in the Operation Guide
available at the CASIO website and adjust the hand alignment.
E-16
Auto Light
xIn the Timekeeping Mode, hold down Bfor about three seconds to toggle Auto
Light between enabled (ON) and disabled (OFF).
xWhile Auto Light is enabled, illumination will turn on if the watch is angled at about
40 degrees or more from horizontal where lighting is dim.
Hand Shift
xHold down Cfor about two seconds. Release the button when HAND appears on
the digital display. This operation will toggle between shifted hands (for easy digital
display reading) and unshifted hands (normal timekeeping).
xThe hands also will move away from the digital display automatically whenever you
display a setting screen in the Timekeeping Mode, Countdown Timer Mode, or
Alarm Mode.
E-15
Alarm Mode
Toggles on and off.
Scrolls alarm screens.
xA(two seconds): Displays alarm time setting screen.
C: Selects hour or minutes.
B, D: Use to change the selected setting.
xA: Exits the setting screen.
xFrom 60 minutes before the alarm time is reached, the alarm mark will start to flash and a
countdown will appear in the Timekeeping Mode.
E-14
Stopwatch Mode
Start/Stop
Split/Reset
DD A
Start Stop Reset
Start/Stop
Countdown Timer Mode
Reset
xA(two seconds when reset to start time):
Displays timer setting screen.
C: Selects minutes or seconds.
B, D: Use to change the selected setting.
xA: Exits the setting screen.
E-13
Timekeeping Mode
Turns on
illumination.
xA (two seconds): Displays setting (Home
City, time, date, etc.) screen.
xA: Changes digital display contents.
Month, day Hour, minute
World Time Mode
Scrolls the
selected city.
xA+ B: Swaps Home Time and World
Time.
xA(two seconds): Toggles summer time
(DST) on or off.
E-12
Mode Selection and Operations
xPress Cto change the mode.
xTo return to the Timekeeping Mode from any other mode, hold down Cfor at
least four seconds.
Timekeeping Mode
World Time ModeAlarm Mode
Stopwatch ModeCountdown Timer Mode
C
C
C
CC
E-11
Screen This setting item: Operation
/ Enabling and disabling the button tone
KEY : ON (enabled)
MUTE: OFF (disabled)
Press D.
/ Enabling and disabling power saving Press D.
/ Display illumination duration
[]: Approximately 1.5 seconds
[]: Approximately 3 seconds
Press D.
4. Press Ato exit the setting screen.
E-10
3. Use Band Dto change the selected setting.
Screen This setting item: Operation
Home City Use D(East) and B(West).
Summer time
OFF: Standard time
ON: Summer time
Press D.
Toggle between 12-hour (12H) and
24-hour (24H) timekeeping Press D.
Reset the seconds to 00
x30 to 59 seconds: Adds 1 to minutes Press D.
Change the hour or minute Use D(+) and B(–).
Change the year, month, or day Use D(+) and B(–).