TimeTec SMART SWITCH User manual

www.i-timetec.com
User Guide
SMART SWITCH PANEL
SMARTLY LIGHT UP YOUR HOME/OFFICE

2
www.i-timetec.com
Smart Switch
PRODUCT BRIEF
The TimeTec Smart Switch can use its touch buttons to control the
light, or control by i-TimeTec smartphone App after the smart home
system is setup.

3
www.i-timetec.com
Smart Switch
FEATURES
1Soft touch control button
2Beeper for operation
3LED indicator
4i-TimeTec Smartphone App control
TECHNICAL SPECIFICATION
Working voltage: AC 180V-250V 50Hz
Standby current: <=4mA
Working temperature: -10 - 55°C
Working humidity: <=90%RH
Communication distance: <=100M (open environment)
Output for resistive load: <=2000W
Type of load: Fluorescent light <= 300W
incandescent light <= 1500W
low voltage halogen light <= 750W
Dimension: 85mm x 85mm x 36mm
Installation: flush mount

4
www.i-timetec.com
Smart Switch
How to add the device to your smart home system?
Log in to your i-TimeTec App account
In the main menu, select Add Device, then scan the QR code of the switch
(QR code is on the back and also on the PCB after remove the front panel).
Add the switch to the smart gateway or smart camera
Connect the switch to electricity wires, power it up so it will connect to the
smart gateway by wireless.
Touch the button to control the light, the beeper sounds
The switch can also be controlled by the i-TimeTec smartphone App.
HOW TO USE

5
www.i-timetec.com
Smart Switch
WIRING DIAGRAM

6
www.i-timetec.com
Smart Switch
Install the standard 86 electric box onto the wall
Connect the electric wires to the switch correctly
Fix the switch onto the 86 electric box with screws
Fix the front panel onto the switch
Finish the installation
INSTALLATION
The device shall be installed in a dry place without chemical corrosion.
The device shall be installed in a place without high electromagnetic in-
terference.
Do not connect to the electricity supply during installation. Double check
the wiring before power it up.
Please contact service agent if the unit does not work properly
IMPORTANT NOTICES
If i-TimeTec Smartphone App control fail:
Check whether the switch is already added to the TimeTec Smart Gateway
Check whether the switch is already connect to the TimeTec Smart Gateway
by wireless
TROUBLESHOOTING

7
www.i-timetec.com
Smart Switch
The device shall be installed in a dry place without chemical corrosion.
The device shall be installed in a place without high electromagnetic in-
terference.
Do not connect to the electricity supply during installation. Double check
the wiring before power it up.
Please contact service agent if the unit does not work properly
IMPORTANT NOTICES
If i-TimeTec Smartphone App control fail:
Check whether the switch is already added to the TimeTec Smart Gateway
Check whether the switch is already connect to the TimeTec Smart Gateway
by wireless
TROUBLESHOOTING

© 2020 Timetec Cloud Sdn Bhd. All rights reserved • 012020
www.i-timetec.com