TINA ProfiNet 9354-PNWD-U Manual

Handling short instructions for
TINA-PROFINET-Upgrade
Construction:
Connect the adapter with the two supplied AN-cables to TINA at the corresponding
AN-sockets 1t 1 as the ports are described.
TINA-PROFINET-Upgrade Port A <=> TINA Port A
TINA-PROFINET-Upgrade Port B <=> TINA Port B
The PROFINET is connected to the adapter on the two lateral RJ45 sockets.
TINA-PROFINET-Upgrade Port Master <=> to PROFINET-master
TINA-PROFINET-Upgrade Port Slave <=> to PROFINET-slaves
As a result, you have now turned TINA into a PROFINET-Watchdog. With the help of the adapter,
TINA can no longer write to the connected PROFINET, but only act as a listener. As a result, there
can be no influence on bus-telegrams.
Please upgrade the firmware of your TINA to the current version, otherwise you will not be able to
use or use all offered functions.

Analysis of the ProfiNet network :
The "new" ProfiNet-WATCHDOG is able to analyze the network traffic of the connected ProfiNet
Due to the structure as described, you have guided your ProfiNet through the ProfiNet-
WATCHDOG, without having to worry about impairments in the real-time behavior
In order to set the network monitoring or to display the current status, you must click on the icon
which can be found in the toolbar Now the following dialog opens:
The dialog has a bar with the following tabs:
•learn mode: Here you can set the parameters for the network monitoring and (if desired)
start the automatically learning of addresses
•monitor mode: Here you can view and adapt the current parameters of the network
monitoring and manage the addresses of the monitoring
•alarms: Here you have the possibility to manage a list with addresses who have triggered
a burglary alarm
Important:
Please note that depending on your configuration an e-mail get's sent for each burglary and
failure. This can lead to an enormous number of e-mails. ou should check your settings
carefully before enabling the e-mail shipping.
An detailed description as well as an explanation of the single web pages can be found in the manual
of this device The user manual can be found on the product page of our web page under the
download section Documentation → Handbook TINA / ProfiNet-WATCHDOG

Under the web-address https://www.process-informatik.de are product specific
documentations or software-driver/-tools available to download.
If you have questions or suggestions about the product, please don’t hesitate to contact us.
Process-Informatik Entwicklungsgesellschaft mbH
Im Gewerbegebiet 1
DE-73116 Wäschenbeuren
[phone]
[email protected]
https://www.process-informatik.de
Copyright by PI 2019 - 2020
9354-PNWD-U
QR-Code Website:Menutree Website:
+ Products / docu / downloads
+ TINA-ProfiNet-upgrade
Please make sure to update your drivers before using our products.

Data backup S7-PLC PN-port on SD-card
S7-SPS getriggerte DB-Sicherung/-Wiederherstellung ohne zusätzlichen PC über PN-Port
auf SD-Karte
LAN-subscriber to the WiFi
You also need to network devices but dont have locally no ethernet-cable. Wifi is
available? With the EtherSens-Bridge you bring immediately all connected wired
participants in the WLAN network.