Tipro FREE User manual

This is a Class A product. In a domestic environment this product may cause radio interference
in which case the user may be required to take adequate measures.
WARNING:
insert
Tipro CD
Installing ChangeMe programming utility
5-pins connection to external
FREE module (if present)
turn the keyboard up side down
guide the cables through the cable canal
connect to USB port
you can also connect up to
two other USB devices to
the internal USB HUB
34
2
1
with
FREE
Getting Started
P/N 40297/4.0

install ChangeMe
run
ChangeMe
your configuration will
be automatically detected
click on
the keyboard module
similary configure other modules, if present.
(card reader shown)
click on the key
to be defined
enter the content for
header and terminator
and program it
to the module!
enter the content
of the key
when finished,
save the
contents to a file
7
910
5
8
6