TOKIT Omni Cook User manual

Omni Cook
Operation Manual

CONTENTS
Please read this manual carefully to ensure correct and safe use of the product.
This product is for home use only.
Note: nstructions of product, accessories, and user interfaces in the user operation manual are for
reference only. Actual products and functions may vary due to product enhancements and technical
improvements.
....................................................................
....................................................................
....................................................................
....................................................................
....................................................................
....................................................................
....................................................................
....................................................................
....................................................................
....................................................................
....................................................................
....................................................................
....................................................................
....................................................................
....................................................................
....................................................................
....................................................................
....................................................................
....................................................................
Important Safeguards 01
02
02
03
04
10
10
10
10
10
11
11
13
17
17
19
20
21
23
Product Overview
Operating Instructions
Troubleshooting
Diagnostic Error Code
Important Safeguards
Specs
Parts & Accessories
Touch screen
Instructions for the use of parts
Quick Start Guide
First start
Start and shutdown
Initial configuration
Emergency stop
Basic settings
Preset modes
Recipe function
Cleaning and maintenance

01
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
Read all Instructions.
Portable – To protect against risk of electrical shock do not put (state specific parts in question ) in
water or other liquid.
Close supervision is necessary when any appliance is used by or near children.
Portable-Unplug from outlet when not in use,before putting on or taking off parts,and before
cleaning.
Avoid contacting moving parts，keep hands ,hair ,clothing ,as well as spatulas and otherutensils
away from beates during operation to reduce the risk of injury to persons ,or damage to the
mixer.
Remove beaters from lock ring before washing.
Do not operate any appliance with a damaged cord or plug or after the appliance malfunctions
or has been damaged in any manner.Return appliance to the nearest authorized service facility
for examination ,repair,or adjustment.
The use of attachments not recommended or sold by the manufacturer may cause fire electric
shock or injury.
Do not use outdoors.
Portable – Do not let cord hang over edge of table or counter,
Hand – held,other than cordless types – Do not let cord contact hot surface, including the
stove.
Keep hands and utensils away from moving blades or discs while processing food to reduce the
risk of severe injury to persons or damage to the food processor,A scraper may be used but
must be used only when the food processor is not running"
Blades are sharp . Handle carefully
To reduce the risk of injury, never place cutting blade or discs on lock ring without first putting
bowl properly in place
Be certain cover is securely lockde in place before operating appliance
Never feed food by hand ,Alwaya use food pusher
Do not attempt to defeat the cover interlock mechanism
Do not fill the bowl above the marked maximum fill line (or rated capacity) to avoid risk of injury
due to damage to the cover or bowl
Do not touch hot surfaces. Use handles or knobs
To protect against electrical shock do not immerse cord,plugs ,or (state specific part or parts in
question)in water of other liquid
Unplug from outlet when not in use and before cleaning .Allow to cool before putting on or
taking off parts
Do not let cord hang over edge of table or counter,or touch hot surfaces
Do not place no or near a hot gas or electric burner, or in a heated oven
Extreme caution must be used when moving an appliance containing hot oil or other hot liquids
Always attach plug to appliance first, then plug cord into the wall outlet.To disconnect,tuin any
control to off ,then remove plug from wall outlet
Do not use appliance for other than intended use
SAVE THIS OPERATION MANUAL PROPERLY
When using electrical appliances, basic safety precautions should always be followed, including the
following:
01
IMPORTANT SAFEGUARDS

02
1 Main engine frame
2 Lock ring
3 Mixing bowl body
4 Sealing ring
5 Mixing blade
6 Mixing bowl lid
7 Measuring cup
8 Whisk
9 Scraper
10 Simmering basket
11 Condensation tray
12 Main body of steamer
13 Septum
14 Steaming rack
15 Steamer lid
16 Tea spoon set
02
PRODUCT OVERVIEW
Parts & Accessories
2.1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
(ordered separately)

03
Mixing bowl
Mixing bowl lid
Measuring cup
Main engine frame
Mixing blade set
Steamer set
(ordered separately)
Simmering basket
Whisk
Scraper
Tea spoon set
Use the steamer set for steam cooking.
Use the whisk to whip cream or as an egg beater.
Use the Tea spoons to measure liquid or powder ingredients.
Part Function
Use the Mixing bowl in combination with the mixing blade
set for cooking and processing food materials.
Use the Mixing bowl lid to seal the Mixing bowl so that no
juice/liquid will splash during its operation. The center of
the lid has an inlet opening for putting ingredients or
materials into the mixing bowl.This can be done during the
cooking process.
Use the scraper to clean off any food materials adhering
to the inner wall of the mixing bowl.
Use the simmering basket to steam food, or process
soft/fragile ingredients, or use it as a strainer to filter fruit
or vegetable juices.
Use the mixing blade set in combination with the mixing
bowl to stir/mix/shred/grind food materials.
The main engine frame is the main component of the
Omni Cook and contains an SMR motor and other
mechanical components to provide core functions.
Use the measuring cup to measure ingredients and seal
the inlet opening on the mixing bowl lid.
Select a desired cooking mode from the mode menu;
select your favorite recipe from the recipe menu; carry out
basic configurations of the device through the setting
menu.
The parameters to configure are: Time, Temperature, and
Speed (mix speed/reverse speed). Touch the Parameter
Configuration icon to access the corresponding parameter
configuration, and then, adjust the parameter setting by
turning the control knob.Scroll the screen up/down to
minimize the panel.
Turn the device off by pressing the control knob for 3
seconds. change the parameter configuration or skip to
next step in smart recipe by turning the control knob; start
or pause the current cooking operation by clicking the
control knob shortly.
2.2.1 Menu bar
2.2.2 Parameter config panel
2.2.3 Control knob
Touch screen
2.2
Mode
Mode
Menu bar
Parameter
config panel
Control knob
Display page
00:00
Min Sec
-- 0

04
Align the mixing bowl vertically with the dock of
the main engine frame, with the handle facing
towards the front.Press the mixing bowl down-
wards until a click is heard, which confirms that the
mixing bowl has been completely locked to the
main engine frame.
To dismount the mixing bowl, push the safety lock
leftwards while lifting the mixing bowl.
Use the Mixing bowl to process or cook food materials. It consists of a stainless-steel container, a
mixing bowl lid, and a blade set. The Omni Cook can only be started for cooking after the mixing
bowl has been properly placed in the main engine frame. Please follow the procedures below:
2.3.1 Mixing bowl
Push the safety lock leftwards
For your safety and a better cooking experience,
please read the following contents carefully:
Place the Omni Cook on a clean, flat, and steady
surface.
Avoid placing the Omni Cook close to the edge,
otherwise, it may drop due to possible move-
ment or collision during its operation.
Do not place it on cooking stoves (high-tempera-
ture area, ceramic cooktop, induction cooker, etc.)
or on a hot or heated surface, but keep it away
from any fire sources.
Do not place it under any furniture (rack,
cupboard, etc.) since the steam generated during
food processing may damage the furniture.
CAUTION
1
2
Instructions for the use of parts
2.3
Please disassemble the mixing blade set separately for cleaning and drying before cleaning the
mixing blade set and mixing bowl,and then assemble it properly for next use. The mixing blade set
is used for stirring/shredding/mixing/grinding food. It must be properly assembled and locked
securely with the lock ring, otherwise, accidental injury may be caused. Please follow the
procedures below:
2.3.2 Mixing blade set

05
Grip the mixing bowl handle, and ensure that its
open side is upward.
Rotate the lock ring anti-clockwise to unlock it,
while leaving the mixing blade in the mixing bowl
for the time being.
Carefully pinch the handle block at the top of the
mixing blade and pull it (together with the sealing
ring) out of the mixing bowl.
The mixing blade is sharp.Please be careful not to
cut yourself when cleaning the mixing blade set.
Wipe off water from the blade set after cleaning.
Carefully pinch the handle block at the top of the
mixing blade and align it with the sealing ring to
the opening at the bottom of the mixing bowl.
Then, mount it into the bottom opening until the
sealing ring touches with the bottom of the mixing
bowl.
Mount the lock ring from below through the drive
shaft of the mixing blade to the mixing bowl and
rotate it clockwise until the mixing blade set is
securely locked.
Handle block
Lock ring
Mixing blade set
Lock ring
Mixing bowl body
Mixing bowl lid
Sealing ring
Measuring cup
Mixing blade
Sealing ring
Rotate anti-clockwise to
unlock the lock ring
1
2
3
4
5
6
For your safety and better cooking experience, please read the following contents:
1.The mixing blade set has sharp blades, please be careful not to cut yourself when mounting/dis-
mounting/handling /cleaning it.
Never touch the blades of the mixing blade set.
Always dismount the mixing blade set with the opening of the mixing bowl facing upwards, avoid
dropping the mixing blade set, otherwise it may cause blade deformation and injury.
Do not put your hand into the mixing bowl before it has been removed from the main engine
frame.
Make sure the mixing bowl and the mixing blade set have been fully cooled down before
dismounting the mixing blade set from the mixing bowl. Residual heat after cooking could cause
scalding.
2.Mount the mixing blade set carefully and properly, and regularly check its service condition and
the contact of the sealing ring with the bottom of the mixing bowl.
CAUTION

06
Place the mixing bowl lid on the mixing bowl, push
it down with both hands to ensure a secure fit of
the mixing bowl lid with the mixing bowl.
Turn the handle of the mixing bowl lid clockwise to
lock the mixing bowl lid and the mixing bowl
handle until you hear a click.
Please ensure that the mixing bowl lid is locked
with the mixing bowl handle. The locking of the
mixing bowl lid and the mixing bowl rim needs to
be secure and free of tilting.
When you want to remove the mixing bowl lid, turn
the handle of the mixing bowl lid counterclockwise
to unlock the mixing bowl lid, then, lift the mixing
bowl lid by gripping its handle.
The Mixing bowl lid is used to seal the Mixing bowl. For your safety, please only start the Omni
Cook when the mixing bowl lid has been properly placed and locked. Please follow the
procedures below:
2.3.3 Mixing bowl lid
Lock up clockwise
When mounting the mixing blade set, make sure the sealing ring properly fits the drive shaft.
Make sure the sealing ring is intact. If the sealing ring is damaged, the main engine frame could
be damaged as a result of liquid leaking in.
Before cooking, ensure that the mixing blade set is properly mounted and securely locked.
CAUTION
1
2
3
4
For your safety and better cooking experience, please read the following contents:
Never force to open the mixing bowl lid, for this may damage the lock on the mixing bowl.
To guard against scalding caused by splashing of hot food materials, do not open the mixing
bowl lid during cooking.
Be careful when opening the mixing bowl lid at the end of cooking, since the mixing bowl may
contain residual high-temperature steam that could cause scalding.
Please regularly check the sealing ring of the mixing bowl lid for any signs of damage.
CAUTION

07
To use the steamer set for steam cooking, simply
mount its bottom into the docking slot on the top
of the mixing bowl lid.
To use the simmering basket for steam cooking,
place it into the mixing bowl and fill it with food
materials.
The steamer set can be freely arranged to meet
your cooking requirements.
If you want to collect the condensation from the
steamer, put the condensation tray between the
bottom of the steam cooker and the mixing bowl
lid; if you want the condensation to flow into the
mixing bowl, simply remove the condensation tray.
The steamer set and simmering basket are used for steaming food. The steamer set consists of a
steamer lid, a steaming tray, a septum,a steaming pot, and a condensation tray.This assembly can
be directly mounted onto the mixing bowl lid. During the cooking process, steam flows into the
steamer via the inlet opening on the mixing bowl lid to steam the food. Please follow the
procedures below:
2.3.4 Steamer set(ordered separately) /Simmering basket
(ordered separately)
Steaming pot
Main body of
steamer
Steaming rack
Steamer lid
Septum
Simmering
basket
Handle
For your safety and better cooking experience, please read the following contents:
Arrange the food materials evenly in one layer inside the steamer, with the total weight of the
food materials, plates, and dishes not exceeding 2 kg.
Be careful not to get scalded when removing the steamer set or the simmering basket from the
steaming pot.
Make sure that there is enough water inside the mixing bowl to prevent dry burning and
damaging the device.
Clean the steamer assembly and simmering basket in a timely manner after each use to ensure
the mesh is not blocked by food.
It is not possible to leave the measuring cup on the mixing bowl lid while using the steamer set.
Please do not try to mount it by brutal force.
Keep an eye on the condensation tray and make sure the condensation is not overflowing. In
general conditions, the tray can accommodate all condensation generated during approximately
an hour of steaming.
CAUTION
1
2
3
4

08
Press the control knob once to pause the cooking
progress, then hold the measuring cup by its wall
and lift it up to remove it.
Add food materials or other ingredients to the
mixing bowl.
Align the measuring cup with the opening of the
mixing bowl lid and press it down to mount it.
Press the control knob a second to resume
cooking.
The measuring cup is used for sealing the inlet opening on the mixing bowl lid to curb heat
dissipation and prevent splashing of food mixture and liquid. It can also be used for measuring
liquid. If you simply want to add a small amount of liquid into the mixing bowl, there is no need to
remove the measuring cup. Simply pour the liquid onto the mixing bowl lid, and it will flow into the
mixing bowl via the gap between the measuring cup and the mixing bowl lid. To add more liquid or
solid food materials, please follow the procedures below:
2.3.5 Measuring cup
The mixing bowl may contain residual high-temperature steam after cooking. Please be careful
not to be scalded by the steam when opening the mixing bowl lid.
Never remove the measuring cup during the cooking process under normal circumstances.
However, some recipes require the removal of the measuring cup to ensure the release of
surplus steam. Please refer to the actual recipes for further details.
CAUTION
1
2
3
4
The scraper is usedfor removing mixed or cooked food materials from the mixing bowl and empty-
ing the mixing bowl. The tea spoon set can also be used for measuring small quantities of powder
or liquid ingredients. The spoons have the following capacities: 10 mL, 5 mL, 2.5 mL, and 1.25 mL,
respectively. When using the accessories of Omni Cook, please observe the following points:
2.3.6 Scraper and tea spoon set
No accessory can be used for any purpose other
than those specified herein.
Never leave the scraper and tea spoon(s) in the
mixing bowl during cooking.
Please check the conditions of the accessories
regularly and replace damaged ones in a timely
manner.
CAUTION

09
Do not use the whisk at a mixing speed higher than Speed 5.
Do not use the whisk and the simmering basket at the same time.
Do not mount/dismount the whisk during its operation of the device.
Do not use the whisk in a high-temperature dry burning environment.
CAUTION
1
2
Mount the whisk on the mixing blade set by
inserting it into the gap between the crossed
blades, and gently rotating it until it is fixed. Please
ensure that it cannot be pulled out vertically easily.
Nip the lifter, gently rotate it, and pull it upwards.
The whisk is used for whipping cream or beating egg liquid.It can also be used for ensuring even
mixing of the ingredients at a low stirring speed, thus preventing food materials from adhering to
and scorching on the bottom of the mixing bowl. Please follow the procedures below to
mount/dismount the stirring rod:
Lifter
Whisk
2.3.7 Whisk

10
During the initial startup, the device will display the Welcome page. Please follow the instructions
on that page to complete the initial configuration, by simply following the instructions displayed
on the screen. During its operation, turn the control knob to proceed to the next step, once the
configuration is completed, you will access to the homepage.
You can modify the configuration later by changing the configurations on the [SETTING] menu.
Wi-Fi connection:select the correct Wi-Fi connection,enter the password, and then press
"CONNECT" to start connection. You can find the Wi-Fi function in the [SETTING] menu.
Insert the power plug into a 120V AC socket. switch the Omni Cook on, and the display panel will
display the launch screen.
Startup: Connect the Omni Cook to power source,and the display panel will automatically display
the
splash screen;
Shutdown: Press and hold the ON/OFF button until a shutdown prompt appears; click CONFIRM
on the screen to shut down the device.
Reminder:
By default, after 10 minutes of idle state, the display panel of the device will go off and automati-
cally enter the SLEEP mode.
When an unexpected emergency situation occurs
during the device is in operation, you may stop the
device immediately by pressing the ON/OFF button
at the right side of the main engine frame. Or you
may suspend current cooking progress by pressing
the control knob, and press the control knob again to
resume previous cooking program.
03
QUICK START GUIDE
First start
3.1
Start and shutdown
3.2
Initial configuration
3.3
Emergency stop
3.4

11
Press the Time configuration icon to access the
Time setting.
Turn the control knob to set up the cooking time.
Cooking parameters, including time, temperature, and mixing speed, can be configured before and
during cooking. Parameter configuration can be set by tapping the icons for Time, Temperature, or
Speed at the bottom section of the screen. Then, settings can be adjusted by rotating the control
knob. Once the parameter configuration has been completed, cooking can be started by pressing
the control knob. You can find more recipes developed by professional chefs from the Recipes page
in the menu bar or by using the search function (on the upper right of the screen). Please follow the
instructions to operate the Omni Cook for cooking.
4.1.1 Set Time
Mode
00:00
Min Sec
-- 0
Notes for time configuration:
The preset time can be modified at any time during the cooking process (with the exception of a
few specific modes). To do so, click the Time configuration icon, and then turn the knob to select
the desired cooking time. The device will continue cooking in accordance with the latest time
settings to the end.
Before the expiry of the preset time settings, you can press the control knob to suspend the
operation of the device and add cooking ingredients at any time during the cooking process,
then, press the control knob again to resume the operation. The device will carry on cooking with
the original preset time settings.
To terminate the cooking, click the Time configuration icon and turn the control knob until time
setting displays 00:00.
CAUTION
1
2
04
OPERATING INSTRUCTIONS
Basic Settings
4.1

12
Notes for temperature configuration:
The cooking temperature can be preset or
modified at any time during the cooking process
(with the exception of a few specific modes).
If you do not require any heating functions, please
leave the temperature value setting at ---.
CAUTION
Press the Temperature configuration icon to
access the temperature setting.
Turn the control knob to set up or adjust the
cooking temperature.
4.1.2 Set Temperature
Press the mixing speed configuration icon to
access the mixing speed settings.
Turn the control knob to adjust the mixing speed.
By turning the control knob anti-clockwise, adjust
the speed from 0 for reverse rotation. Reverse
rotation using the back of the blades to gently stir
or mix food materials.
4.1.3 Set mixing speed
Mode
00:00
Min Sec
-- 0
Notes for the configuration of the mixing speed:
The mixing speed can be preset or modified at any time during the cooking process (with the
exception of a few specific modes).
Once the cooking time and mixing speed have been properly configured, the device can be
started.
Before setting the mixing speed, please ensure that the mixing bowl has been properly mounted
on the main engine frame and that the mixing bowl lid is properly placed and locked up with the
mixing bowl.
There are 20 mixing speeds and 10 reverse speeds available to choose. Turn the control knob
clockwise to adjust the mixing speed and anti-clockwise to adjust the reverse speed.
Do not use a high speed when the cooking temperature is above 60°C, otherwise, you might be
at the risk of scalding as a result of overflow.
CAUTION
1
1
2
3
2
Mode
00:00
Min Sec
-- 0

13
Notes about the mincing mode:
Remove tendons,bones,skin of meat, and also defreeze frozen meat before processing.
The mincing mode is not suitable for processing hard food materials, such as frozen meat, ice
cubes, and large bones.
During the mincing process, the device may experience shaking, so please do not leave it
unattended.
If food material adheres to the wall of the mixing bowl or if shaking is too violent, shut down the
device immediately. Rebalance the food materials to ensure even distribution in the mixing bowl
and restart the mincing process.
CAUTION
1
2
3
4
A variety of cooking modes have been preset with the Omni Cook to meet your specific needs.
These cooking modes are available in the homepage, include weighing mode, turbo mode, kneading
mode, ice shaving mode, juicer mode, grinding mode, mincing mode, shredding mode, pre-cleaning
mode, steam cooking mode, stewing mode, etc. Using the mincing mode as example, please
follow the procedures below:
Clean the meats and cut into small pieces of approx.
1-2 cm. Then, put them into the mixing bowl. Be
careful not to exceed the 2.2L maximum level mark
on the mixing bowl.
Mount the mixing bowl onto the main engine frame,
close the mixing bowl lid and ensure that the mixing
bowl and the lid are both properly locked.
Turn on the device, and then select the "Mincing
Mode" from the Mode list in the homepage. Press
the knob, and the device will operate in accordance
with the preset program and automatically stop
upon completion of the program. Press the control
knob to suspend the operation of the device while it
is operating.
When the process is complete, dismount the mixing
bowl from the main engine frame and remove the
mince with the scraper.
Preset Modes
4.2

14
Notes on the weighing mode:
The weighing mode has to be accessed only when the device is not currently in any other
operation.
When using the weighing mode, please ensure that the device is placed on a horizontal and flat
workbench,otherwise, the results of the weighing may be inaccurate.
To exit the weighing mode, simply click the “X” icon on the upper right corner of the Weighing
page.
CAUTION
1
2
3
Mount the mixing bowl into the main engine frame,
click to select the Weighing mode from the Modes
list.
Put food materials or ingredients into the mixing
bowl for weighing. The weight will be displayed on
the screen.
Press the knob to reset to Zero and then weigh
another food material or ingredient. This weighing
process can be repeated until the cumulative weight
reaches the maximum limit of 5,000 g or other
preset value.
The weighing mode can be chosen from the Mode list in the homepage to weigh food materials and
other ingredients. Please follow the procedures below:
g
Weighing

15
Turn the device off by pressing the control knob for 3
seconds. change the parameter configuration or skip to
next step in smart recipe by turning the control knob; start
or pause the current cooking operation by clicking the
control knob shortly.
Turbo mode Crushing food fast In this mode, the configurations are preset to
particular parameters and not adjustable; Press
the Turbo mode icon again to exit this mode;
To avoid any unpredictable situations, do not
leave the device unattended when using this
mode. During its operation, please ensure that
the mixing bowl lid is in place and the
measuring cup has been properly mounted.
Weighing mode Weighing food materials Press the control knob to reset to Zero.
Mode Function Important notes
Kneading mode Kneading dough Cooking temperature and mixing speed are
fixed, and not adjustable in this mode.
Ingredients can be added via the inlet opening
on the top of the mixing bowl lid, for example,
to add water.
Manual control In Manual control, you can
configure the cooking time,
temperature, and mixing
speed on your demand.
Note: With Manual control,the
maximum cooking time is 99
minutes, the maximum cooking
temperature is 180°C, and the
maximum mixing speed is 10.
When you are unfamiliar with the operation of
this device, you are recommended to follow
the procedures and settings in the recipes
from your Omni Cook to ensure proper
operation of the device for cooking.
List of preset modes
Ice shaving mode Crushing ice, you can
select coarse ice or fine
ice
The cooking temperature is locked and not
adjustable in this mode. During its operation,
please ensure that the mixing bowl lid is in
place and the measuring cup has been
properly mounted to prevent crushed ice from
splashing.
Juicer mode Extracting juice from
fruits/vegetables that are
rich in water.
The cooking temperature is locked and not
adjustable in this mode. During its operation,
please ensure that the mixing bowl lid is in
place and the measuring cup has been
properlymounted to prevent liquid from
splashing and overflowing .
Grinding mode Grinding cereal and
pulverizing food materials
The cooking temperature is locked and not
adjustable in this mode. You are recommended
to cut the food materials into small pieces for
better and more thoroughly uniformly grinding
of the food materials.
Mincing mode Preparing minced meat
and crushing food
materials
The cooking temperature is locked and not
adjustable in this mode. This mode is not
suitable for food materials with higher
hardness or higher water content, e.g., frozen
meat, fruit.

16
Mode Function Important notes
Note: When using the
Steaming mode, the power
rate may vary with the
current input voltage. Higher
voltage will generate more
power output.
Shredding mode Shredding larger food
materials
The cooking temperature is locked and not
adjustable in this mode. During its operation,
please ensure that the mixing bowl lid is in
place and that the measuring cup has been
properly mounted to prevent food materials
from overflowing.
Pre-cleaning mode Pre-cleaning the mixing
bowl before manual
cleaning
The recommended amount of water for
pre-cleaning shall not exceed the 1L mark,
During its operation, please ensure that the
mixing bowl lid is in place and the measuring
cup has been properly mounted.
Stewing mode Stewing food materials The mixing blade rotates intermittently in this
mode to avoid over-stirring food materials.
This mode is suitable for prolonged stewing of
food materials (e.g., stewing meat and making
soup).
Steaming mode Steaming or boiling food
materials
Cooking temperature and mixing speed are
locked and not adjustable in this mode. In this
mode, the mix blade remains still and does not
rotate, this mode is suitable for boiling brittle
food materials (e.g., dumpling, tofu, etc.) or
steaming food materials, but not suitable for
any steaming and boiling operation with liquid
other than water (e.g., stewing meat).
Note: Due to product improvements and upgrades, there may be differences in the names of modes
between the physical product and the schematic diagram, and those in the physical product may be
subject to modification from time to time. Please visit the official website of TOKIT GLOBAL for
further information.

17
For your better cooking experience with the Omni Cook, you can access your smart guided recipes
by clicking the Recipe menu in the upper left corner of the screen or by performing the recipe
search by clicking the Search bar in the upper right corner of the screen and entering key words.
Before your first use of the product, please completely clean and rinse all assemblies and
accessories that may contact with food materials.
After each use, please wash all parts and wipe off water after washing.
Between two cooking procedures or after cooking, you can use the "Pre-cleaning "mode to
wash the mixing bowl. You can find this mode in the Mode homepage.
To clean the mixing blade set and mixing bowl thoroughly, please disassemble the mixing bowl
by following the Instructions for the Use of Parts section in this operation manual.
Do not use objects with sharp edges or metal scourers to clean the mixing bowl, but special
detergents for stainless steel.
Please be careful with the mixing blade set when cleaning and handling it. Do not touch the
sharp edges of the mixing blade set.
To guard against inadvertent dropping of the mixing blade set, be careful when dismounting it.
Never insert your hand into the mixing bowl when it has been mounted to the main engine
frame.
To clean the surface of plastic accessories (e.g., the simmering basket), please use soft cleaning
cloth and dish soap.
All accessory tools including mixing blade set, blade cover, steamer set, simmering basket,
slow-cook plug, measuring cup, whisk, scraper, and tea spoon set, are dishwasher safe.
Always disconnect the power source before cleaning the main engine frame.
Clean the main engine frame with a moist cloth and mild detergent.
Do not use excessive water for cleaning in case water or moisture may leak into the main engine
frame.
The mixing bowl and mixing blade set may be damaged if they are soaked in water, other
liquids, or residual food for a prolonged period of time. Therefore, please wash and dry them in
a timely manner after use.
Cloud Recipe
4.3
Cleaning and maintenance
4.4
Prolonged stewing or contact with acidic substances could lead to rust. Therefore, please
carefully check for debris from your cooking ingredients.
4.4.1 Cleaning
4.4.2 Maintenance

18
Regularly check the main engine frame and all its accessories (including the mixing bowl, power
cord, sealing ring of the mixing bowl lid, and sealing ring of the mix blade set) for potential
damage.
Regularly check the air vent of the device. If the air vent is blocked it will damage the device.
Disconnect the device from the power source if the device is not in use for a prolonged time.
The main engine frame is designed to have a drainage mechanism at the bottom of the mixing
bowl dock. If a large amount of soup or liquid is splashed onto the mixing bowl dock, do not
rotate or move the main engine frame because the liquid will automatically drain out from the
drain holes at the bottom. Instead, use an absorptive sponge or a soft towel to wipe off the
liquid from the surface of the main engine frame.
Keep the device dry and clean. Place it in a dry and ventilated environment.
Do not use any damaged accessories.
Mixing blade set and accessories are consumables. Please replace them in a timely manner by
considering their frequency of use and general condition to ensure perfect cooking results.