TOOLSTATION Hawksmoor CLM36LW User manual

Original User’s Instructions
36V (2x18V) 34cm Cordless Lawnmower
SKU: 44788
PLEASE KEEP THESE INSTRUCTIONS FOR FURTHER REFERENCE
WHAT’S IN THE BOX
If you do not have all these items, please contact:
www.toolstation.com/contact
Telephone [phone]
Email inf[email protected]
Mower x 1
Upper hadnle x 1 Upper handle
locking knob
with washer x 2
Lower handle
locking knob
with washer x 2
Lower handle x 2
Grip handle for
grass collection bag x 1
Grass collection bag x 1
Charger x 1
Battery pack x 2

SPECIFICATION
• Single lever cutting height adjustment
• Removable battery for convenient storage and charging
• Carry handle for easy transport
• Foldable handles for compact storage
• Bagging and rear discharge
TECHNICAL DATA
Sku/Model 44788/CLM36LW
Voltage 36V (2x18V)
No Load Speed 4200 /min
Cutting Diameter 34 cm
Cutting height 25-75mm
Cutting height positions 6
Grass collection capacity 30L
Battery Capacity (ABP1820SW ) 2.0 Ah
Charger Input (ACG218W2) 100-240V ~ 50/60Hz, 50W
Charger Output (ACG218W2) 18 V , 2.0 A
Charging Time 2hr for 2*18V 2.0Ah
1hr for 1*18V 2.0Ah
Machine Weight 11 kg
Battery pack 2
Charger 1
Grass collection bag 1

Noise Information
A weighted sound pressure L
pA
= 97 dB(A)
K
pA
= 3.0 dB(A)
A weighted sound power L
wA
= 92.6 dB(A)
K
wA
= 1.9 dB(A)
Wear ear protection.
Vibration Information
Typical weighted vibration a
h
= 3.6 m/s
2
, uncertainty K = 1.8 m/s
2
WARNING: The vibration emission value during actual use of the power tool can differ from the
declared value depending on the ways in which the tool is used dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained
Using the correct accessory for the tool and ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration accessories are used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not adequately managed.

WARNING: To be accurate, an estimation of exposure level in the actual conditions of use should
also take account of all parts of the operating cycle such as the times when the tool is switched
OFFANDWHENITISRUNNINGIDLEBUTNOTACTUALLYDOINGTHEJOB4HISMAYSIGNIÚCANTLYREDUCETHEEXPOSURE
level over the total working period.
Helping to minimise your vibration exposure risk.
ALWAYS use sharp chisels, drills and blades
Maintain this tool in accordance with these instructions and keep well lubricated (where appropriate)
If the tool is to be used regularly then invest in anti vibration accessories.
Plan your work schedule to spread any high vibration tool use across a number of days.

Read instruction handbook before operation this machine
Keep bystanders away
Warning!
Wear eye and ear protection
Beware of sharp blades. Blades continue to rotate after the motor is switched off-
Remove disabling device before maintenance.
Batteries may enter water cycle if disposed improperly, which can be hazardous for
ecosystem. Do not dispose of waste batteries as unsorted municipal waste.
Do not burn
EXPLANATIONS AND SYMBOLS, CAUTIONS AND WARNINGS

Li-Ion battery This product has been marked with a symbol relating to
‘separate collection’ for all battery packs and battery pack. It will then be
recycled or dismantled in order to reduce the impact on the environment.
Battery packs can be hazardous for the environment and for human
health since they contain hazardous substances.
Waste electrical products must not be disposed of with household waste.
Please recycle where facilities exist. Check with your local authorities or
retailer for recycling advice.
Double insulation (Only for charger)
Indoor use only (Only for charger)
Positive terminal (Only for charger)
Negative terminal (Only for charger)
Fuse (Only for charger)
CE marking
UKCA marking
T 2A
Li-Ion

ORIGINAL INSTRUCTIONS
PRODUCT SAFETY
GENERAL SAFETY WARNINGS
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
ELECTRICSHOCKÚREANDORSERIOUSINJURY
Carefully read the instructions for the safe operation of the
machine.
Save all warnings and instructions for future reference.
- This appliance is not intended for use by persons (including
children) with reduced physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they have been given
supervision or instruction concerning use of the appliance by a
person responsible for their safety.
- Children should be supervised to ensure that they do not play with
the appliance.
- The appliance is only to be used with the power supply unit
provided with the appliance.
IMPORTANT
READ CAREFULLY BEFORE USE
KEEP FOR FUTURE REFERENCE
SAFE OPERATING PRACTICES
1. TRAINING
a) Read the instructions carefully. Be familiar with the controls and
the proper use of the equipment.
b) Never allow children or people unfamiliar with these instructions
to use the lawnmower. Local regulations can restrict the age of
the operator.
c) Never mow while people, especially children, or pets are nearby;
d) Keep in mind that the operator or user is responsible for
accidents or hazards occurring to other people or their property.
2. PREPARATION
a) While mowing, always wear substantial footwear and long
trousers. Do not operate the equipment when barefoot or wearing
open sandals;
b) Thoroughly inspect the area where the equipment is to be used
and remove all objects which can be thrown by the machine;
HEALTH AND SAFETY

c) Before using, always visually inspect to see that the blades,
blade bolts and cutter assembly are not worn or damaged.
Replace worn or damaged blades and bolts in sets to preserve
balance. Replace damaged and unreadable labels.
3. OPERATION
A -OWONLYINDAYLIGHTORINGOODARTIÚCIALLIGHT
b) Avoid operating the equipment in wet grass, where feasible;
c) Always be sure of your footing on slopes;
d) Walk, never run;
e) For wheeled rotary machines, mow across the face of slopes,
never up and down; mow across the face of slopes, never up and
down.
f) Exercise extreme caution when changing direction on slopes;
g) Do not mow excessively steep slopes;
h) Use extreme caution when reversing or pulling the lawnmower
towards you;
i) Stop the blade(s) if the lawnmower has to be tilted for
transportation when crossing surfaces other than grass, and
when transporting the lawnmower to and from the area to be
mowed;
j) Never operate the lawnmower with defective guards , or without
SAFETYDEVICESFOREXAMPLEDEÛECTORSANDORGRASSCATCHERSIN
place;
k) Switch on the motor carefully according to instructions and with
feet well away from the blade(s);
l) Do not tilt the lawnmower when switching on the motor, except if
the lawnmower has to be tilted for starting. In this case, do not tilt
it more than absolutely necessary and lift only the part which is
away from the operator;
m) Do not put hands or feet near or under rotating parts. Keep clear
of the discharge opening at all times;
n) Not to touch the blades before the disabling device has been
removed and the blades have come to a complete stop;
o) Do not start the lawnmower when standing in front of the
discharge opening.
p) Do not transport the lawnmower while the power source is
running.
q) Stop the lawnmower,and remove the disabling device. Make sure
that all moving parts have come to a complete stop.
– whenever leaving the machine unattended,
– before clearing a blockage,
– before checking, cleaning or working on the machine,
– after striking a foreign object. Inspect the machine for

damage and make repairs before restarting and operating
the lawnmower if the lawnmower starts to vibrate abnormally
(check immediately)
– inspect for damage.
– replace or repair any damaged parts.
– check and tighten any loose parts.
4. MAINTENANCE AND STORAGE
a) Keep all nuts, bolts and screws tight to be sure the equipment is
in safe working condition;
b) Check the grass catcher frequently for wear or deterioration;
c) Replace worn or damaged parts for safety. Use only genuine
replacement parts and accessories.
d) Be careful during adjusting of the lawnmower to prevent
ENTRAPMENTOFTHEÚNGERSBETWEENMOVINGBLADESANDÚXEDPARTS
of the lawnmower.
e) Always allow the lawwnmower to cool down before storing.
f) When servicing the blades be aware that, even though the power
source is switched off, the blades can still be moved.
SAFETY WARNINGS FOR BATTERY PACK
a) Do not dismantle, open or shred cells or battery pack.
b) Do not short-circuit a battery pack. Do not store battery
packs haphazardly in a box or drawer where they may
short-circuit each other or be short-circuited by conductive
materials.
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails, screws or
other small metal objects, that can make a connection from one
terminal to another. Shorting the battery terminals together may
CAUSEBURNSORAÚRE
C $ONOTEXPOSEBATTERYPACKTOHEATORÚRE!VOIDSTORAGEIN
direct sunlight.
d) Do not subject battery pack to mechanical shock.
e) In the event of battery leaking, do not allow the liquid to
come into contact with the skin or eyes. If contact has been
made, wash the affected area with copious amounts of water
and seek medical advice.
f) Seek medical advice immediately if a cell or battery pack has
been swallowed.
g) Keep battery pack clean and dry.
h) Wipe the battery pack terminals with a clean dry cloth if they
become dirty.
i) Battery pack needs to be charged before use. Always refer to

this instruction and use the correct charging procedure.
j) Do not maintain battery pack on charge when not in use.
k) After extended periods of storage, it may be necessary to
charge and discharge the battery pack several times to
obtain maximum performance.
l) Battery pack gives its best performance when it is operated
at normal room temperature (20 °C ± 5 °C).
m) When disposing of battery packs, keep battery packs of
different electrochemical systems separate from each other.
N 2ECHARGEONLYWITHTHECHARGERSPECIÚEDBYMANUFACTURER
$ONOTUSEANYCHARGEROTHERTHANTHATSPECIÚCALLYPROVIDED
for use with the equipment.
A charger that is suitable for one
TYPEOFBATTERYPACKMAYCREATEARISKOFÚREWHENUSEDWITH
another battery pack.
o) Do not use any battery pack which is not designed for use
with the equipment.
p) Keep battery pack out of the reach of children.
q) Retain the original product literature for future reference.
r) Remove the battery from the equipment when not in use.
s) Dispose of properly.
t) Do not mix cells of different manufacture, capacity, size or
type within a device.
u) Do not remove battery pack from its original packaging until
required for use.
v) Observe the plus (+) and minus (–) marks on the battery and
ensure correct use.
GENERAL SAFETY WARNINGS FOR BATTERY CHARGER
WARNING! Read all safety warnings and all instructions.
Failure to follow the warnings and instructions may result in
ELECTRICSHOCKÚREANDORSERIOUSINJURY
Save all warnings and instructions for future reference.
This appliance can be used by children aged from 8 years and
above and persons with reduced physical, sensory or mental
capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in
a safe way and understand the hazards involved. Children shall not
play with the appliance. Cleaning and user maintenance shall not be
made by children without supervision.
If the supply cord is damaged, It must be replaced by the
MANUFACTURERITSSERVICEAGENTORSIMILARLYQUALIÚEDPERSONSINORDER
to avoid a hazard.

Additional safety instructions for your battery charger
1. Before charging, read the instructions.
2. Do not charge a leaking battery.
3. Do not use chargers for works other than those for which they are
designed.
4. Before charging, ensure your charger is matching the local AC
supply.
5. For indoor use, or do not expose to rain.
6. The charging device must be protected from moisture.
7. Do not use the charging device outdoors.
8. Do not short out the contacts of battery or charger.
9. Respect the polarity “+/-“ when charging.
10. Do not open the unit and keep it out of the reach of children.
11. Do not charge the batteries of other manufactures or ill-suited
models.
12. Ensure that the connection between the battery charger and
battery is correctly positioned and is not obstructed by foreign
bodies.
13. Keep battery charger’s slots free of foreign objects and protect
against dirt and humidity. Store in a dry and frost-free place.
14. When charging batteries, ensure that the battery charger is in
AWELLVENTILATEDAREAANDAWAYFROMINÛAMMABLEMATERIALS
Batteries can get hot during charging. Do not overcharge
any batteries. Ensure that batteries and chargers are not left
unsupervised during charging.
15. Do not recharge non-rechargeable batteries, as they can
overheat and break.
16. Longer life and better performance can be obtained if the battery
pack is charged when the air temperature is between 18
o
C and
24
o
C. Do not charge the battery pack in air temperatures below
0
o
C, or above 40
o
C. This is important as it can prevent serious
damage to the battery pack.
17. Charge only battery pack of the same model provided by
manufacturer and of models recommended by manufacturer.

COMPONENT LIST
1
2
3
4
5
6
7
1 Safety key 10 3AFETYÛAP
2 Upper handle 11 Upper handle locking knob
3 Lower handle 12 Cable clip
4 Grip handle for grass collection bag 13 Switch lever
5 Grass collection bag 14 Battery pack (See Fig. E)
6 Cutting height adjusting lever 15 Battery charger (See Fig. E)
7 Wheel 16 Blade (See Fig. I1)
8 Battery housing cover 17 Blade bolt (See Fig. I2)
9 Lower handle locking knob
8
9
10
11
12
13

ASSEMBLY AND USE
NOTE:
To reduce the risk of injury, user must read
instruction manual.
Intended Use
This product is intended for domestic lawn mowing.
WARNING: Before assembly and adjusting to the
mower, ensure the mower is turned off and the battery
pack is removed.
1. FITTING THE HANDLE
1) Remove the lower handle locking knobs with the washers on
both side of the deck.
2) Insert the lower handle into the holes on the deck. Insert the
lower handle locking knob with its washer into the hole on the
lower handle. Be sure to carefully align the holes found on the
lower handles and the deck. (See Fig. A1)
3) Tighten the lower handle locking knob by pressing the knob
onto the lower handle as shown in Fig. A2.
4) Repeat the same steps to the other side of the lower handle.
Now the lower handle is locked in place.
5) Attach the upper handle onto the lower handle from outside
of the lower handle. There are two holes on the lower handle
for different height to choose. Select a proper hole as required
and align the holes on the upper handle and lower handle.
(See Fig. A3)
6) Align the upper handle locking knob from outside of the upper
handle, align and insert the locking bolt and the washer
through the hole from inside of the lower handle. Then insert
the locking bolt with washer into the upper handle locking
knob. (See Fig. A4)
7) Tighten the upper handle locking knob by pressing the knob
onto the lower handle as shown in Fig. A5. Repeat the same
steps to the other side of the upper handle. Check that the
handles are FULLY secured.
1
2
A2
A3
A1
A4
A5

12
Frontpart Backpart
3
1
2
B2
B3
B1
C1
C2
C3
2. GRASS COLLECTION BAG ASSEMBLY
1) Align the front and back parts of the grip handle
for grass
collection bag
with the front and rear slots on the grass
collection bag. (See Fig. B1)
2) Press the front part of the grip handle down, then push the
handle forward a little. Ppress down the back of the handle.
(See Fig. B1)
3) Clip the plastic clips over the metal frame at the bag opening.
(See Fig. B2)
4) Now the grass collection bag is ready. (See Fig. B3)
7!2.).'Ø$ONmTÚTTHEHANDLEINREVERSEDDIRECTION
Fit the handle as shown in Fig. B1.
3. FITTING THE GRASS COLLECTION BAG TO THE MOWER
/PENTHESAFETYÛAPATTHEBACKOFTHEMOWERANDHOLDIT0ICK
up the grass collection bag by the grip handle, and position
the grass collection bag onto the upper hooks as shown in
Fig. C2. (See Fig. C1, C2)
2ELEASETHESAFETYÛAP%NSURETHEGRASSCOLLECTIONBAGIS
installed securely. (See Fig. C3)
NOTE: Pull the grass collection bag slightly to ensure that it is
completely installed.
4. REMOVING/EMPTYING THE GRASS COLLECTION BAG
/PENTHESAFETYÛAPATTHEBACKOFTHEMOWERANDHOLDIT,IFTTHE
grass collection bag and remove it from the mower.
Empty the grass collection bag before it has reached its
maximum capacity, otherwise it will decrease the performance of
the lawn mower.
7!2.).'Ø!LWAYSCHECKTHESAFETYÛAPCANCLOSE
the discharge outlet tightly before using. Never lift
THESAFETYÛAPWHENTHELAWNMOWERISBEINGUSEDWITHOUT
ÚTTEDGRASSCOLLECTIONBAG

5. ADJUSTING THE CUTTING HEIGHT (SEE FIG. D)
WARNING! Stop, release switch lever and wait until
the motor stops before adjusting cutting height.The
blades continue to rotate after the machine is switched off,
a rotating blade can cause injury.
CAUTION: Do not touch rotating blades.
&ORTHEÚRSTCUTTINGOFTHESEASONAHIGHCUTTINGADJUSTMENT
should be selected. The lawnmower can be set to 6 cutting
heights between 25mm and 75mm.
1) Grip the cutting height adjustment lever and pull it outwards,
then move it up a notch, towards the rear of the lawn mower to
increase the cutting height.
2) Grip the cutting height adjustment lever and pull it outwards,
then move it downa notch, towards the motor to decrease the
cutting height.
3) Press the adjustment lever inwards again, until it engages in
the desired level.
BEFORE OPERATION
WARNING: The charger and battery pack are specially
designed to work together so do not attempt to use
any other devices. Never insert or allow metallic objects
into your charger or battery pack connections because of
an electrical failure and hazard will occur.
NOTE:
A$ONOTUSEANYCHARGEROTHERTHANTHATSPECIÚCALLYPROVIDED
for use with the equipment.
b) If the battery pack is very hot you must remove your battery
pack from the charger and allow time for the battery to cool
down before recharging.
c) The battery in your new tool is not charged when it leaves the
PLANT4HEREFOREITMUSTBEFULLCHARGEDBEFOREUSINGTHEÚRST
time
d) Please charge the battery to reach full or no less than half
charge before storage. If the tool will not be used for long
periods of time, charge the battery every 3-6 months.
1. CHARGING PROCEDURE (SEE FIG. E)
1) Connect the battery charger to the power supply and the
indicator light should be green.
2) Slide the battery pack into the charger base to make
connections, and the indicator light will be red to show that the
charging has started.
3) When charging is completed, the light will turn to green. The
pack is now fully charged, unplug the charger and remove the
battery pack.
WARNING: When battery charge runs out after
continuous use or exposure to direct sunlight or
heat, allow time for the tool to cool down before re-charging
to achieve the full charge.
1
2
2
D
14
15
E

Light Status
Red on Charging
Green on Fully Charged
2. TO REMOVE OR INSTALL BATTERY PACK

1) Open the battery housing cover. Depress the battery release
button and remove the battery pack from the mower. (See Fig.
F1)
2) After recharging, insert the battery pack into the mowerr’s
BATTERYPORTWITHSUFÚCIENTFORCEUNTILITCLICKSINTOPOSITION
(See Fig. F2)
NOTE:
7HENREMOVINGTHEBATTERYPACKHOLDITÚRMLYTOAVOID
potential accidents.
OPERATION
1. STARTING AND STOPPING
WARNING! The blade continues to rotate for a few
seconds after the machine is switched off. Allow the
motor/blade to stop rotating before switching “on” again.
Do not rapidly switch off and on.
NOTE: Only start the appliance on level ground and not in long
grass. The ground must be free of foreign bodies such as stones.
Do not lift or tilt the appliance for starting.
STARTING (SEE FIG G1, G2)
1) Insert the safety key into the motor switch on the handle.
2) Push the key inwards and hold it in position. Pull the switch
lever towards the handle and the mower will start.
3) Release the safety key while holding the switch lever.
NOTE:
The switch lever do not engage. Hold them tight against the
handlebar during the entire working period.
STOPPING
1) Release the switch lever.
2) Wait for the mower to come to a standstill.
3) Remove the safety key.
2. CHECKING THE FILL LEVEL (SEE FIG. H)
To remind you immediately to empty when the grass collection
bag is full, the mower provides an indicator on the top of bag to
show the collection status. And you can follow as below:
%MPTYSTATUSÛAPÛOATSA
&ULLYSTATUSÛAPFALLSDOWNB
3. CUTTING AREA
The cutting area can be affected by several factors, such as
cutting height, lawn humidity, grass length and density.
TIPS:
1) It is recommended to mow your lawn more frequently, walk at
normal pace, and not to start/stop the mower too often during
a
b
2
1
G2
H
G1
1
2
F1
F2

operation.
2) For best performance, please ensure use a fully charged
battery pack and always cut off 1/3 or less of the grass height.
3) Walk slowly when cutting long grass, so as to have more
effective cutting and properly discharge the clippings.
4) Avoid cutting wet grass, otherwise it will stick to the underside
of the deck and the clippings cannot be collected or
discharged properly.
5) A higher cutting height shall be applied to new or thick grass
and it will extend the battery duration.
4. MOWING TIPS
NOTE: Always inspect area where mower is to be used and
remove all stones, sticks, wire, metal and other debris which
might be thrown by the rotating blade.
1) Mow across the face of slopes, never up-and-down. Exercise
extreme caution when changing direction on slopes. Do not
mow excessively steep slopes. Always maintain good footing.
2) Release switch lever to turn mower “OFF” when crossing any
graveled area (stones can be thrown by the blade).
3) Set mower at highest cutting height when mowing in rough
ground or in tall weeds. Removing too much grass at one time
can cause circuit breaker to trip, which stops mower.
4) If a grass bag is used during the fast growing season, the
grass may tend to clog up at the discharge opening. Release
switch lever to turn mower “OFF” and remove the safety key.
Remove the grass bag and shake the grass down to the back
end of the bag. Also clean out any grass or debris which may
be packed around the discharge opening. Replace the grass
collection bag.
5) If mower should start to vibrate abnormally, release switch
lever to turn mower “OFF” and remove safety key. Check
immediately for cause. Vibration is a warning of trouble. Do not
operate mower until a service check has been made.
6) ALWAYS RELEASE SWITCH LEVER TO TURN MOWER
“OFF” AND REMOVE SAFETY KEY WHEN LEAVING IT
UNATTENDED EVEN FOR A SHORT PERIOD OF TIME.

WARNING! Before all maintenance and care work:
Switch off the mower and wait until the mower has
stopped. Remove the safety key, and remove the battery
packs.
WARNING: Wear protective gloves.
NOTE: To ensure long and reliable service, perform the following
maintenance procedures regularly. Check for obvious defects
SUCHASALOOSEDISLODGEDORADAMAGEDBLADELOOSEÚTTINGS
and worn or damaged components. Check that the covers and
guards are all undamaged and are correctly attached to mower.
Carry out any necessary maintenance or repairs before operating
mower. If the mower should happen to fail despite regular
maintenance, please call our customer helpline for advice.
REGULAR MAINTENANCE WORK
• Make sure that all nuts, bolts and screws are tightened and
the appliance is in a safe working condition.
• Check the grass collection bag regularly for correct operation
and wear.
CLEANING THE MOWER
WARNING: Water in the appliance causes short-
circuits and destroys electrical components. Do not
spray the appliance with water.
Only use a broom or a brush or cloth for cleaning.
CHECKING AND RENEWING THE CUTTING BLADE
WARNING:
• Severe injuries can be caused due to blade parts being
ÛUNGOUT!WORNCRACKEDORDAMAGEDCUTTINGBLADECAN
break, and its parts can become dangerous projectiles.
• Regularly check the cutting blade for damage.
• Do not use the lawnmower if the cutting blade is worn or
damaged.
• Have dull or damaged blades sharpened or replaced only
by an authorized specialist.
• Renew your metal blade after 50 hours mowing or 2 years,
whichever is the sooner-regardless of condition.
• To avoid vibrations, the cutting blade and blade bolt must
always be replaced together.
• Resharpened cutting blades must be balanced.
Unbalanced cutting blades cause strong vibrations and
damage the mower.
• Wear proper eye protection while removing, sharpening,
and installing blade. Ensure that safety key is removed.
Follow these procedures to remove and replace the blade.
1) Switch off the mower, remove the safety key and the battery
packs.
2) Turn the mower over to expose the blade. (See Fig. I1)
CARE AND CLEANING
H
I1
16

3) Unscrew and remove the blade blot (17) using a spanner (not
supplied) by turning it in an anti-clockwise direction.
4) Remove the blade. (See Fig. I2)
5) To re-assemble, position the blade with the cutting edges
towards the ground. Then securely tighten the blade bolt (17)
using a spanner (not supplied) by turning it in a clockwise
direction. (See Fig. I3)
BLADE SHARPENING
WARNING: Replace bent or damaged blade
immediately.
NOTE: Keep blade sharp for best mower performance.
Sharpening the blade twice during a mowing season is usually
SUFÚCIENTUNDERNORMALCIRCUMSTANCES3ANDCAUSESTHEBLADETO
dull quickly. If your lawn has sandy soil, more frequent sharpening
may be required.
When sharpening the blade:
1) Make sure blade remains balanced.
2) Sharpen blade at the original cutting angle.
3) Sharpen cutting edges on both ends of blade, removing equal
amounts of material from both ends.
STORAGE
WARNING: If the appliance is accessible to children
and unauthorized persons during storage, this can
result in injury. Store the appliance out of the reach of
children and unauthorised persons.
WARNING: Store the battery packs in cool and dry
CONDITIONSBUTNOTEXPOSEDTONAKEDÛAMESORHEAT
sources.
1. Switch off the appliance: remove the safety key.
2. Pull out the rechargeable batteries.
3. Allow the engine to cool down.
4. Thoroughly clean the appliance.
5. Rub a thin coat of oil or silicon onto all metal parts for
corrosion protection.
6. Loosen the upper handle locking knob and fold the handlebar
as shown in Fig. J1, J2.
7. Store the appliance in a dry, clean location protected from
frost. Cover with a breathable tarpaulin to protect against dust.
$ONOTUSEPLASTICÚLMINORDERTOAVOIDTHEACCUMULATIONOF
moisture.
2
1
1
2
I2
I3
17
J2
J1

TROUBLE SHOOTING
Problem Possible Cause Corrective Action
The machine
does not
work, or stop
suddenly
Possible clogging Check underneath the machine and clear out as nec-
essary (always wear gardening gloves).
Battery not fully charged Charge the battery.
Battery not inserted (properly) Inserting the Battery properly.
Grass too long Increase the cutting height and tilt machine to reduce
starting load.
Safety key damage Contact Service Agent.
Motor protector has activated Allow motor to cool /increase height of cut.
Battery too hot/cold Allow to cool/warm.
Safety key not inserted correctly/fully Fit correctly.
Machine
functions
intermittently
Internal wiring of machine damaged Contact Service Agent
Motor protector has activated Allow motor to cool /increase height of cut
Machine
leaves ragged
ÚNISHAND
Motor labor
Cutting height too low Increase the Cutting height.
Cutting blade dull Contact Service Agent to replacethe blade.
Possible clogging Check underneath the machine and clear out as nec-
essary (always wear gardening gloves)
"LADEÚTTEDUPSIDEDOWN 2EÚTBLADECORRECTLY
Area of cut
(battery dura-
tion) not large
enough
Cutting height too low Increase the cutting height and walk slower.
Grass too high Increase the cutting height and walk slower.
Grass wet or damp Wait until the grass is dry and walk slower.
Grass is dense Increase the cutting height , walk slower and cut more
frequently.
Cutting blade
not rotating
while machine
switched on
Cutting blade obstructed Switch off machine and clear obstruction (always wear
gardening gloves).
Blade nut/bolt loose Tighten the blade nut/bolts.
Excessive
vibrations/
noise
Blade nut/bolt loose Tighten the blade nut/bolts.
Cutting blade damaged Contact Service Agent to replacing the blade.
No charging
procedure
possible
Battery contacts contaminated Clean the battery contacts (e.g. by inserting and
removing the battery several times) or replace the
battery (Batteries can be purchased to service agents)
The battery is defective, due to a
disconnection in the battery
Replace the battery (Batteries can be purchased to
service agents)
The charge
control LED
respectively,
do not light up
after inserting
the mains plug
into the socket
Mains plug of battery charger not
plugged in (properly)
Insert mains plug (fully) into the socket outlet
Socket outlet, mains cable or battery
charger defective
Check power supply voltage and the battery charger, if
necessary, contact customer service for an authorized
inspection.
NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR TOOL, PLEASE DO NOT ATTEMPT
TO OPEN OR REPAIR THE TOOL YOURSELF. DOING SO MAY VOID THE WARRANTY AND
COULD CAUSE DAMAGE OR PERSONAL INJURY. IF THE PROBLEM STILL PERSISTS,
PLEASE CONTACT US BY REFERRING TO THE SERVICE & SUPPORT INFORMATION ON THE
FOLLOWING PAGE.

Product Code: 44788 (CLM36LW)
Product Description: 36V (2x18V) 34cm Cordless Lawnmower
1. Toolstation Limited, Express Park, Bristol Road, Bridgwater, Somerset TA6 4RN
This declaration of conformity is issued under the sole responsibility of Toolstation
2. Object of the declaration
The object of the declaration described above is in conformity with the relevant Community
harmonization legislation:
Supply of Machinery (Safety) Regulations 2008
2006/42/EC
Electromagnetic Compatibility Regulations 2016
2014/30/EU
Electrical Equipment (Safety) Regulations 2016
2014/35/EU
The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment
Regulations 2012
2011/65/EU&(EU)2015/863
Noise Emission in the Environment by Equipment for use Outdoors Regulations 2001
2000/14/EC amended by 2005/88/EC
2000/14/EC amended by 2005/88/EC:
- Conformity Assessment Procedure as per Annex VI
- Measured Sound Power Level 92.6 dB(A)
- Declared Guaranteed Sound Power Level 95 dB(A)
4HENOTIÚEDBODYINVOLVED
.AME)NTERTEK4ESTING#ERTIÚCATION,TDNOTIÚEDBODY
Address: Davy Avenue, Knowlhill, Milton Keynes, MK5 8NL
DECLARATION OF CONFORMITY / PERFORMANCE