Topaz F-ARL-TR MOUNT User manual

Item #: F-ARL-TR MOUNT
Used on products: F-ARL-300W/50K/P3 and F-ARL-300W/50K/P5
www.topaz-usa.com 925 Waverly Ave • Holtsville, NY 11742 • 800-666-2852 • Fax: [phone]
Note: Pole mount, back plate,
shorting cap and existing hardware
are not needed.
Secure metal spacers (b) to both sides
of area light with screws (d) using a
3mm hex key.
a b c d e f g
PARTS LIST:
a. (1) Trunnion Mount Bracket
b. (2) Metal Spacers
c. (2) A2-70 Bolts
d. (4) Screws
e. (2) Washers
f. (2) Star Washers
g. (2) Locking Washers
TOOLS NEEDED:
-3mm Hex Key
-8mm Hex Key
1 2
INSTALLATION INSTRUCTIONS FOR TRUNNION MOUNT BRACKET
Make sure serrated
teeth are pointing
away from xture.

www.topaz-usa.com 925 Waverly Ave • Holtsville, NY 11742 • 800-666-2852 • Fax: [phone]
Secure mounting bracket, bolts and washers to area light using a 8mm hex key.
Do not tighten fully. Adjust mounting bracket to desired position, then tighten down
to lock mounting angle.
Place (1) locking washer, (1) washer, and (1) star washer on bolt in this order:
3
4
A2-70 Locking Star
Bolt Washer Washer Washer
(c) (g) (e) (f)