Topfield TF3200IR User manual

The User’s Manual
Please read this UserÕs Manual carefully.
The menu structure and specification can be changed without notice.
Digital Satellite Receiver
With Irdeto Embedded.
TOPFIELD
TF3200IR

This symbol indicates “dangerous voltage”
inside the product that presents a risk of
electric shock or personal injury.
This symbol indicates
important instructions
accompanying the product.
CAUTION
RISK ELECTRIC SHOCK
Do NOT OPEN
CAUTION: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE
INTRODUCTION 4
CONTENTS 5
FEATURES 5
FRONT/ REAR PANELS 6
1) FRONT PANEL 6
2) REAR PANEL 6
REMOTE CONTROL UNIT(RCU) 8
GETTING STARTED 12
FUNCTION GUIDE 13
MENU OPERATIONS 16
1) SYSTEM SETTING 17
2) ORGANIZING CHANNEL 27
3) ORGANIZING FAVORITES 29
4) INSTALLATION 30
5) INFORMATION 40
6) Irdeto Access 41
7) GAME 43
TROUBLE SHOOTING(Q & A) 45
SPECIFICATIONS 46
TABLE OF CONTENTS
Please do not insert metal or alien substance into the slots
for the Modules and Cards.
In doing so can cause damage to the STB and reduce its life span.

WARNING
WARNING Warning WARNING Warning WARNING
Please read the following recommended safety precautions carefully for your safety.
MAINS SUPPLY : 90-250V AC 50/60 Hz.
OVERLOADING : Do not overload wall outlets, extension cords or adapters
as these can result in fire or electrical shock.
LIQUIDS : Keep liquids away from the STB.
The apparatus shall not be exposed to dripping or splashing and
that no objects filled with liquids, such as vases, shall be placed
on the apparatus.
SMALL OBJECTS : Coins or other small objects must be kept away from the IRD
as they can fall through the ventilation slots of the IRD and
cause serious damage.
CLEANING : Disconnect the IRD from the wall socket before cleaning it.
Use a dry cloth lightly dampened(no solvents) to clean
the exterior of the IRD.
VENTILATION : Do not block the decoder’s ventilation slots.
Ensure that a free airflow is maintained around the IRD.
NEVER stand the IRD on soft furnishings or carpets.
Do not use or store the IRD where it is exposed to direct
sunlight or near a heater. NEVER stack other electronic
equipment on top of the IRD.
ATTACHMENTS : Do not use any attachments that are not recommended as these
may cause hazards or damage the equipment .
CONNECTION TO THE SATELLITE DISH LNB :
Disconnect the IRD from the mains before connecting or
disconnecting the cable from the satellite dish.
FAILURE TO DO SO CAN DAMAGE THE LNB.
SERVICING : Do not attempt to service this product yourself.
Refer all serving to qualified service agents.
LIGHTNING : It is recommended that the IRD should remain connected at all
times to the mains supply and satellite dish (except when
working on the LNB). However, the manufacturer’s
instructions for safeguarding other equipment connected to the
IRD, i, e, TV set, must be followed during lightning storms.
LNB and the modem telephone line are essential.
EARTHING : The LNB cable must be earthed to the system earth for
the satellite dish.
LOCATION : Locate the IRD indoor place properly to prevent lightening,
raining and direct sunlight.

INTRODUCTION
Thank you for purchasing the Digital Satellite Receiver (STB).
This Digital Satellite Receiver is fully compliant with the international DVB standard
and thus transmits digital images, sounds, information guides and teletext directly
to your TV through the satellite. Now you can comfortably see and receive digitally
transmitted music, news, movie and sports satellite broadcasts in your office or at your
home.
In the Channel Search section, both the automatic channel search method and the
manual Search mode are provided. Also it supports DiSEqC 1.2 and USALS enabling
you to move your antenna in order to focus your preferred satellite. You can save
up to 2500 and 1500 Radio channels and work around with the Favorite, Lock,
Delete, Move and Sort functions. The Menu is very modern and supports different
languages. All functions can be carried out using the remote control and some of the
functions can also be carried out using the front panel.
The STB is easy to use and adaptable for future advances. Please be aware that new
software may change the functions of the STB.
If you have any difficulties concerning the operation of your STB, please refer to the
relevant section of this manual, including the ‘Troubleshooting’. This Manual will
provide you with useful information on using the STB.
INTRODUCTION

Please ensure that the following items are included with the STB.
1) Remote control unit
2) Batteries (size AAA)
3) User’s Guide (this document)
Fully Compliant to DVB
Antenna/LNB control
- 22KHz mode On/Off
- Automatic FEC Detection
- DiSEqC 1.0 & 1.2 compatible & USALS
Satellite/Channel support
- 2500 TV channels, 1500 Radio channels storable
- Automatic channel search
Video/Audio
- Automatic PAL/NTSC selection
- Multi-lingual Audio support
- Multi-lingual Subtitle support
OSD (On Screen Display) support
- 256 color support.
- Multi-lingual menu text support.
- GMT and Time Offset support
- 10 favorite channel groups support
- Page Up/Page Down available on your channel list
- PIG ( Picture In Graphic ) support
Teletext
- Software emulation mode with always VBI insertion mode on.
Games are embedded.
CONTENTS
FEATURES
CONTENTS / FEATURES

- STANDBY
The power button of STB (ON / Stand by)
2)Rear Panel
FRONT / REAR PANELS
FRONT/REAR PANELS
- CHANNEL
The channel buttons are to change channels.
- LED
STANDBY
REMOTE
TV / SAT

FRONT / REAR PANELS
LNB IN
Connects the satellite antenna cable.
LNB OUT
Use it to connect to another STB.
RS232
Upgrades the STB Program & software.
TV SCART
Connects the TV SCART
VIDEO INPUT
Video input (YELLOW).
AUDIO-LEFT INPUT
Audio input (WHITE).
AUDIO-RIGHT INPUT
Audio input (RED).
RF OUT
Connects the TV.
RF IN
Connects the TV antenna.
FRONT/REAR PANELS

REMOTE CONTROL UNIT
VOL
CH
OK
/LIST VOL
CH
REMOTE CONTROL UNIT (RCU)
Switches the STB between Operation and
Standby mode.
Returns to the previous menu and the screen.
Enables/ Disables the Audio.
Selects the TV or Radio service channels
and individual menu options.
Displays the Menu on screen or returns to
previous menu from submenu.
Displays the EPG (Electronic Program
Guide) on screen only when available.
Tunes to the next or previous service.
Services up or down through the available
services.
Adjusts the volume (Increase/Decrease).
CH
CH
VOL VOL
Displays Channel List on screen. Selects the item in the menu mode.
Displays the program information box on the screen and removes it.

REMOTE CONTROL UNIT (RCU)
Changes the terrestrial TV and Satellite mode.
Selects LEFT/RIGHT/MONO/STEREO sound function.
Selects the subtitle language list for the current service.
Enables the teletext with software emulation.
Displays the favorite channel list.
Displays and alters the UHF setting in menu.
Selects the previously viewed channel.
Selects the TV/Radio mode.
REMOTE CONTROL UNIT

INSTALLATION
1) Connection to TV and Hi-Fi
1-2) Connection to the TV using the RF cable.
Connect a terrestrial antenna to RF IN socket on
the STB.
Connect one end of the RF cable to the
RF OUT socket on the STB. Connect
the other end to the ANT IN socket on the TV.
INSTALLATION (Connection)
1-1) Connection to the TV with the SCART
Cable.
Connect one end of the SCART cable to
the TV SCART socket on the STB and
the other end to a SCART socket on the
TV.
First, connect both the satellite antenna and the TV line to the STB and switch the
power on.
In this manual there are some of the most common ways to connect the equipment:
TV and STB.
There are several ways of connecting the STB to the existing Audio/TV system.
We recommend using one of the following setups.
If you have problems with your connections and need help, contact your dealer or
Service Provider.

INSTALLATION (Connection)
1-3) Connection to the TV with the CINCH
Cable.
Connect one end (3 connectors) of the
CINCH cable to the AUDIO-RIGHT
(red), AUDIO-LEFT (white) and
the VIDEO OUTPUT (yellow) socket
on the STB.
Connect the other end (3 connectors) to
the AUDIO-RIGHT input (red),
AUDIO-LEFT input (white) and the
VIDEO input (yellow) socket on the
TV or Hi-Fi.
2) Connection to the other Satellite
Receiver.
Connect the satellite cable to the LNB IN
socket on the STB. With a connector, connect
the LNB OUT socket on the STB and the
ANT IN socket of the other STB.
INSTALLATION

Press the Power button to operate the STB from the STANDBY mode.
Now, the Info box will appear for a given time and disappear. Pressing the button,
the Info box will remain on the screen. The display time of the Info box is adjustable
under the System Setting Menu of the Main Menu.
If the current broadcast has EPG (Electronic Program Guide) with it, press the button
to see not only the current channel’s but also other channel’s EPG without any time constraints.
Also, press the button to reserve and save the current service and to watch the broadcast
automatically when it starts.
IMPORTANT: Before taking charge of your new STB, some important technical
settings are essential.
- Adjust your antenna through Dish Setting menu in installation menu.
- First, press the button on the RCU to make the Main Menu appear.
- Go to the LNB Setting menu under the Channel Search item of the
Installation menu and press button.
- The Default PIN CODE is 0000.
- Choose the right parameters for Satellite Name, LNB Frequency, 22KHz, 12 V,
DiSEqC 1.0, and Motorized System according to your LNB and satellite settings.
If the right Satellite Name and LNB Frequency were not found in the list, call the
dealer for satellite information.
- Then, press the button and go back to the Channel Search menu.
- Set the Search Mode to the Auto mode. (A Manual or Advanced Search
can always be performed later on)
- Select the Start Search... item and press button.
- The search procedure will take a while. Press the button when the searching
process is over (100%) to confirm and save the new channel list.
- For further information, please refer to the LNB Setting item of the MENU
OPERATIONS on this manual.
GETTING STARTED
GETTING STARTED

FUNCTION GUIDE
Function Guide
Service List
Press key on the RCU to see the Service List.
You can choose the service you want to watch.
By using keys, you can move the
cursor.
The functions of Service List are as follows.
Bouguet List
If you want to watch the services of special Bouguet,
choose the Bouguet you want
Satellite List
If you want to watch the services of special satellite.
Choose the satellite you want with key.
Satellite List
If you want to watch the services after alphabetic search, press key.
VOL VOL
CHCH
CH

Function Guide
Press INFO key on the RCU to see the program
information. The Information box displays as
follows:
Channel Number
Channel Name
Detailed Program Information
Signal Level & Quality
Satellite Information
Information of subtitle and / or teletext
Information Box
EPG (Electronic Program Guide)
schedules. The button makes the reservation for the next program.
button shows extended information of the current program.
button will change the contents of EPG between TV and Radio services.
To use currently showing TV, and Radio
services as well as to use next program
schedules, press button on the
remote control unit.
If EPG is available on programs, you will see
the detailed description of the programs,
start/end time and programs schedules etc.
, and , buttons will be used
to move program and to see next program
VOL VOL
CH
CH
schedules. The button makes the reservation for the next program.
button shows extended information of the current program.
button will change the contents of EPG between TV and Radio services.
FUNCTION GUIDE

You can choose a language of subtitle using
button on the RCU.
If a broadcaster provides subtitles, you can see
symbol in the Information Box.
Subtitle
You can choose a language of soundtrack using
button on the RCU when a broadcaster
supports various languages of soundtrack.
Also, it is possible to choose a mode among
Stereo, Mono, Left and Right using the
, buttons on the RCU.
Soundtrack
Teletext
FUNCTION GUIDE
VOL VOL
If a broadcaster supports teletext, you can see symbol in the Information Box.
There are VBI insertion mode and software emulation mode in teletext.
In the VBI insertion mode, which is always on, you can watch the teletext with your TV
using the RCU of your TV. To watch teletext with VBI insertion, your TV must support
teletext.
In the software emulation mode, you can watch the teletext even though your TV does
not support teletext. You can watch the teletext using the RCU of STB.
Press button twice to watch the teletext with software emulation mode.
Press button or EXIT( ) button to escape from teletext.
Function Guide

MENU OPERATIONS
Now this chapter assumes that the STB system has been installed correctly,
meaning:
* The satellite dish for the STB has been installed, connected to the STB and
correctly adjusted to the proper satellite.
* The STB is connected to the TV.
* The RCU has batteries and ready to control the STB.
If the STB has not been installed or connected properly, please refer to the
INSTALLATION (connection) menu on this manual.
Many of the functions of the STB are available from the Main Menu. Press the
button to open it.
MENU OPERATIONS

I-1 TIME SETTING
MENU OPERATIONS
I. SYSTEM SETTING
Various time modes can be set, such as the current local time, the Power
On/Off time and the Sleep Time. The exact local present time can be adjusted
by using the GMT, the Time Offset and the Mode sub menus.
PLEASE NOTE: Configure the Local Time before adjusting the
Wakeup Time,Power Off Time or the Sleep Time.
MENU OPERATIONS

A. Local Time Setting
Press the button at Local Time Setting item in the Time Setting
menu to open the Local Time Setting menu. Inside the Local Time Setting
menu, there are 4 sub menus: Mode, Local Time,GMT and Time Offset.
Mode
By using the , buttons,you can control the Auto/Manual mode. The Auto
mode automatically updates the time settings by adding the GMT received from
the satellite and the Time Offset value you have inserted. The Auto mode is
recommended.
Local Time
The Local Time is adjustable only when the Mode is on the Manual mode.
Adjust the current time, if necessary, by using the numeric buttons and the ,
buttons.
GMT
GMT is referred to the standard time of Greenwich. This cannot be changed.
MENU OPERATIONS
VOL VOL
VOL VOL
MENU OPERATIONS

Use the , buttons to select the On/Off mode. If the Timer item
item is set to On, the Wakeup Time item, the Wakeup channel
item and the Power Off Time item becomes adjustable.
The Wakeup Time item sets up the time the STB automatically turns on.
Insert the preferable Wakeup Time by using the numeric buttons and the
, buttons on the RCU. To disable the wakup function, make the Timer item Off.
B. Timer
C. Wakeup Time
MENU OPERATIONS
MENU OPERATIONS
VOL VOL
VOL VOL
VOL VOL
Time Offset
The current time of the local area can be inserted. In another words, insert the
time difference of the local time zone from the GMT. For example, if the local
area is Seoul (the time difference from the GMT being 9), insert 9:00. The time
is adjustable by using the , buttons,15 minutes at a time.

The Power Off Time menu sets the time of the STB automatically turns off.
The Sleep Time item is similar to the Power Off menu. The Sleep Time
function turns off after the adjusted sleep time.
E. Power Off Time
F. Sleep Time
MENU OPERATIONS
The Wakeup Channel item automatically turns the STB to the preset
channel when it automatically turns on by the Wakeup function.
D. Wakeup Channel
MENU OPERATIONS