Toshiba BDX3000KU User manual

TOSHIBA
Blu-ray Disc Player
BDX3000KU
OWNER'S MANUAL
db ... ·1 ,.
Master Audio I Essential
""~,d
[I] DOLB'l
TRUETI!: I
DIGITAL PLUS I
[Q]DO~@
DIGITAL AUDIO
~
CERTIFIED
I0 ~ II
V IDE 0
~~
S'u-rayO;sc
TOSHI •• ........ "' .... " .... _
Owner's Record
The model number and serial number are on the back'ofthe
unit Record these numbers in the spaces below. Refer to
these numbers whenever
you communicate with your Toshiba
dealer about this unit.
©2010 Toshiba Corporation
Model number:
Serial
number:

SAFETY PRECAUTIONS
CAUTION: VISIBLE LASER RADIATION WHEN
OPEN. DO NOT STARE INTO BEAM.
WARNING: TO REDUCE THE RISK OF ELECTRIC
SHOCK, DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE. REFER
SERVICING TO QUALIFIED SERVICE PERSONNEL.
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS APPLIANCE
TO RAIN OR MOISTURE. DANGEROUS
HIGHVOLTAGES ARE PRESENT INSIDETHE ENCLOSURE. DO NOTOPEN
THE CABINET. REFER SERVICING
TO QUALIFIED PERSONNEL ONLY.
I0IThe symbol for Class II (Double Insulation)
The lightning flash with an arrowhead symbol, within the equilateral
triangle,
is intended to alert the user to the presence of uninsulated
"dangerous voltage" within
the product's enclosure that may be of
sufficient magnitude
to constitute arisk of electric shock to persons.
The exclamation point within the equilateral triangle is intended to
alerttheuser
to thepresenceofimportantoperatingand maintenance
(servicing) instructions
in this owner's manual.
A
A
RISQUE DE CHOC ELECTRIQUE NE
PASOUVRIR
AVIS
IMPORTANT SAFETY INSTRUCTIONS
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with adry cloth.
7. Do not block any of the ventilation openings. Install in accordance with the manufacturer's instructions.
8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the polarized or grounding-type plug. Apolarized plug has two blades with one widerthan
the other. Agrounding type plug has two blades and athird grounding prong. The wide blade or the third prong is provided
for your safety.
If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet.
10. Protect the power cord from being walked on
or pinched particularly at plugs, convenience receptacles, and the point where
they exit from the apparatus.
11. Only use attachments/accessories specified by the manufacturer.
12. Use only with the cart, stand, tripod, bracket, or table specified
by the manufacturer, or sold with the <I
apparatus. When acart is used, use caution when moving the cart/apparatus combination to avoid injury
from tip-over.
13. Unplug this apparatus during lightning storms or when unused for long periods of time.
14. Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such
as the power-supply cord or plug
is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus
has been exposed to rain or moisture, does not operate normally, or has been dropped.
ADDITIONAL SAFETY INSTRUCTIONS
15. Do not overload wall outlets; extension cords, or integral convenience receptacles as this can result in arisk of fire or electric
shock.
16. Neverexpose the apparatus to dripping orsplashing or place items such as vases, aquariums, any other item filled with liquid,
or candles on top of the unit.
17. Keep your fingers well clear of the disc tray as it
is closing. Neglecting to do so may cause serious personal injury.
18. Do not place anything on top of this unit.
19. Do not place the apparatus
on amplifiers or equipment that may produce heat.
20. Never block or cover the slots or openings
in the unit.
Never place the unit: 1) on abed, sofa, rug
or similar surface; 2) too close to drapes, curtains, or walls; or 3) in aconfined
space such as abookcase, built-in cabinet, or any other place with poor ventilation.
The slots and openings are provided
to protect the unit from overheating and to help maintain reliable operation.
21. Do not use acracked, deformed, or repaired disc.These discs are easily broken and may cause serious personal injury and
apparatus malfunction.
22. If the apparatus should emit smoke or
an unusual odor, immediately disconnectthe power cord from the wall outlet.Wait until
the smoke or smell stops, then ask your dealer for acheck and repair. Neglecting to do so may cause fire.
23. During thunderstorms, do not touch the connecting cables or the apparatus.
24. Warning:
To prevent spread of fire, keep candles or other open flames away from this product at all times.

PRECAUTIONS
CAUTION:
•
To prevent direct exposure to laser beam, do not try to open the enclosure. Visible and invisible laser radiation when open and
interlocks defeated. DO NOT STARE INTO BEAM.
•Use of controls or adjustments or performance of procedures other than those specified may result
in hazardous radiation
exposure.
•Danger of explosion if battery
is incorrectly replaced. Replace only with the same or equivalent type.
Warning: Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause
undesired operation.
The party responsible for compliance
to these rules is:
Toshiba America Consumer Products, L.L.C.
82 Totowa
Rd. Wayne, NJ 07470.
Ph: 1-800-631-3811
Note: This equipment has been tested and found
to comply with the limits for aClass Bdigital device, pursuant to part 15 of the
FCC Rules. These limits are designed to
prOVide reasonable protection against harmful interference in aresidential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used
in accordance with the
instructions, may cause harmful interference
to radio communications.
However, there
is no guarantee that interference will not occur in aparticular installation. If this equipment does cause harmful
interference to radio ortelevision reception, which can be determined by turning the equipment off and on, the useris encouraged
to try
to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet
on acircuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radiofTV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment.
This equipment should be installed and operated with minimum distance 20cm between the radiator and your body.
This class B digital apparatus complies with Canadian ICES-003.
Cet appareil
numerique de la classe Best conforme ala norme NMB-003 du Canada.
WARNING: Changes or modifications
to this unit not expressly approved by Toshiba, or parties authorized by Toshiba, could void
the user's authority
to operate the equipment.
Notes On Copyright
This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.
Use of this copyright protection technology must
be authorized by Rovi Corporation, and is intended for home and other limited
viewing uses only unless otherwise authorized by Rovi Corporation. Reverse engineering or disassembly is prohibited.
On Placement
• Do not use this unit in places which are extremely hot, cold, dusty or humid.
•
Do not restrict the air flow of this unit by placing it somewhere with poor air flow, by covering it with acloth, or by placing it on
bedding or carpeting.
•
Be sure to remove the disc and unplug the AC power cord from the outlet before carrying the unit.
On Safety
• Do not handle the AC power cord with wet hands and do not put your fingers or objects into the unit.
•When connecting or disconnecting the
AC power cord, grip the plug and not the cord itself. Pulling the cord may damage it
and create ahazard.
•When you are not going to use the unit for along period of time, disconnect the
AC power cord.
On Condensation
•When left in aheated room where it is warm and damp, water droplets or condensation may form inside the equipment.
When there is condensation inside the unit, the unit may not function normally. Let the unit stand for 1-2 hours before turning
the power
on or gradually heat the room and allow the unit to dry before use.
On Recycling
•This unit's packaging materials are recyclable and can be reused. Please dispose of any materials in
accordance with your local recycling regulations.
•Batteries should never be thrown away
or incinerated but disposed of in accordance with your local
regUlations concerning chemical wastes.
•Products that earn the ENERGY
STARiPJ prevent greenhouse gas emissions by meeting strict energy efficiency
.guidelines set by the U.S. Environmental Protection Agency and the U.S. Department of Energy. ENERGY STAR and
the ENERGY
STAR mark are registered U.S. marks.
'§jijiiiihi;'

~
Q"Wi-Fi CERTIFIED" logo
is
aregistered trademark of
Wi-Fi Alliance. "Wi-Fi PRO-
CERTIFIED TECTED SETUP" logo
is a
trademark of Wi-Fi Alliance.
EM>
"DVD" logo is atrademark
of
DVD Format ILogo
Licensing Corporation.
HDMI, the HDMI logo, and
High-Definition Multimedia
HOml®
Interface are trademarks
or registered trademarks
HIGH-DEFINITION MULTIMEDIA INTERFACE
of HDMI Licensing LLC in
the United States and other
countries.
[IJDOLBY: Manufactured under license
from Dolby Laboratories.
TRUETIE IDolby and the double-D
symbol are trademarks of
DIGITAL PLUS IDolby Laboratories.
Manufactured under license
under U.S. Patent #'s:
5,451,942; 5,956,674;
5,974,380; 5,978,762;
6,226,616; 6,487,535;
7,392,195; 7,272,567;
7,333,929; 7,212,872 &
db '"
other U.S. and worldwide
~:
~O·
patents issued &pending.
Master Audio I Essential
DTS and the Symbol are
registered trademarks, &
DTS-HD, DTS-HD Master
Audio IEssential and the
DTS logos are trademarks
of DTS, Inc. Product
includes software. ©DTS,
Inc. All Rights Reserved.
"x.v.Color" and "x.v.Color"
x.v.Color
logo are trademarks of Sony
Corporation.
"AVCHD" and the "AVCHD"
~VCHDTM
logo are trademarks of
Panasonic Corporation and
Sony Corporation.
BONUS VIEW™
"BONUSVIEWTM", "BD-
BD~
L1VETM" and "Blu-ray 3DTM"
S'u-fay
are trademarks of Blu-ray
l.;L1VE,.
3U'M
Disc Association.
4)
Oracle and Java are
registered trademarks
of Oracle and/or its
~
affiliates. Other names
=-'
Java
may be trademarks of their
respective owners.
POWERED
Windows Media and the
Windows logo are
f i'" i Plays 1trademarks or registered
,f ~:.:" Windows Itrademarks of Microsoft
~-; .TM Media™
Corporation in the United
States and/or other
countries.
Quick Start Guide
(EN/ES)
Description
Composite Audio fVideo
Cables
Description refers to Audio CD IDTS-CD
Description refers to DVD-RWf-R with
AVCHD files
Description refers to DVD-video
Description refers to BD-RE/-R, DVD-
RW/-R, CD-RW/-R and SD Memory Card
with JPEG files
Description refers to BD-REf-R, DVD-
RW/-R, CD-RW/-R and SD Memory Card
with MP3 files
Description refers to BD-RE/-R, DVD-
RW/-R, CD-RW/-R and SD Memory Card
with Windows Media™Audio files
Description refers to BD-video and BD-RE
IBD-R recorded in BDMV format
OJ
Owner's Manual
(EN)
Remote Control with
Batteries
(AAA x2)
Symbols Used in this Manual
To specify for which media type each function is, we put the
following symbols at the beginning of each item to operate.
Supplied,Accessories
If you do not find any of the symbols listed above under the
function heading, the operation
is applicable to all media.
"Blu-ray Disc™'' and
82 are trademarks of Blu-ray Disc
Association.
Blockbuster is aregistered trademark of Blockbuster, Inc.
Netflix
is aregistered trademark of Netflix Inc.
Pandora is aregistered trademark of Pandora Media, Inc.
VUDU
is atrademark of VUDU, Inc.
[Trademark Information

hie of Contents
Introduction
•SAFETY PRECAUTIONS 2
•IMPORTANT $AFETY INSTRUCTIONS 2
•PRECAUTIONS 3
•Supplied Accessories 4
•Symbols Used in this Manual 4
.Trademark Information 4
•Table of Contents 5
•Features 6
•Identification of Controls 7
Front panel 7
Rear paneL 7
•Using the Remote Control 8
Remote Control 8
Installing batteries 9
Operating with the remote control 10
Front Panel Display 10
Connections
•Connecting to aTV 11
Connecting to aTV using an HDMI cable 12
Connecting to a
TV using acomponent video cable 12
Connecting to a
TV using an NV cable 12
•Connecting to an Audio System 13
Via 2-Channel Analog Audio Output 13
Via Digital Audio Output 13
Via HDMI Audio Output 13
•Network Connection 14
Connecting your player to awired router 14
Connecting your player to awireless access point
or
router 14
•Connecting the Speakers 15
•Positioning the Speakers 16
Playback
•Information on Playback 17
Playable Discs and Files............................................ 17
Unplayable Discs and Files 17
Color Systems 18
Region Codes 18
Structure of Disc/SD Card Contents 18
•Playing aDisc 19
Basic playback........................................................... 19
•Variable Speed Playback 20
Playing in fast reverse / forward directions 20
Playing frame by frame 20
Playing in slow motion 20
•Locating aDesired Section 20
Locating atitle using the top menu............ 20
Locating aspecific chapter or track
21
•Accessing aSpecific Location Directly 21
Locating aspecific title/chapter/time 21
• Repeating aTitle, Chapter, Track or Specific
Segment 22
Repeating atitle, chapter or track.............................. 22
Repeating aspecific segment 22
•Playing in aRandom Order 22
Playing tracks or files in arandom order 22
•PIP(BONUSVIEW) Setting 23
•Camera Angle 23
•Audio Selection 23
•Subtitle Selection 24
•Displaying On-screen Information 24
•Playing AVCHD/MP3IWMAlJPEG Files 25
Playing files on adata disc 25
•Using an SD Card 26
Inserting an SD card 26
•Using aUSB Device 27
Operating aUSB device 27
Customizing the Function Settings
.General Operations 28
•Info Menu 28
•Performing Quick-Setup 28
.Using BD-Live™ Features 28
•Display Setting
29
•Audio Setting 31
•Speaker Setting 32
•Language Setting 33
•Parental Control 33
.System Setting 34
•Upgrading Your Player's Firmware 35
•Network Connection Setting 36
.Using the Connected Applications 39
Watching Movies with NetfliX®... 39
Watching Movies with
BLOCKBUSTER<B> 40
Watching Movies with VUDU'· 40
Listening to Music with
PANDORA<ll> 41
Others
.Troubleshooting &Maintenance 42
Troubleshooting 42
Maintenance 43
•Glossary 44
•Specifications 46
•Limited Warranty 47

atures
Blu-ray Disc
You can enjoy Slu-ray Disc which is capable ofstoring five times
more data than aconventional
DVD.
BO-Java
With some SDs which supportJava applications, you can enjoy
the interactive functions such as games or interactive menus.
BO-Live'
SD-Live (SD-ROM version 2Profile 2.0) that allows interactive
functions to
be used when this unit is connected to the Internet
in addition to the SONUSVIEW function. The various functions
differ depending
on the disc.
Full high-definition video playback
Watch movies in the highest picture quality available for your
HDTV. This unit offers full high-definition video playback up to
1080p resolution for an amazing viewing experience. Ahighly
detailed picture and increased sharpness delivers amore true-
to-life picture.
OVO Upconversion for enhanced picture quality
Your current DVD will look even better than before thanks to
video upconversion. Upconversion will increase the resolution
of standard definition
DVD to high definition up to 1080p over
an HDMI connection. The picture will be less jagged and more
realistic for anear high-definition experience.
Enjoy your content on different kinds of media
Full backwards compatibility with 8D, DVD, CD and SD card
ensures that you can continue to enjoy yourcurrent audio-video
collection. Additionally, you can view JPEG digital pictures or
listen to MP3 or Windows Media™Audio music files.
Experience rich multi-channel surround sound
Multi-channel surround sound, which recognizes real-to-life
sound and makes you feel like you are really there.
PIP (BONUSVIEW)
Some SD-videos have the PIP function which enables you to
display the secondary video
in the primary video. You can call
up the secondary video by pressing BONUSVIEW whenever
the scene contains the secondary video.
Pop-up menu
Some SD-video have pop-up menu which is anavigation menu
that can be called up and be operated on the TV screen without
interrupting the playback.
You can call up the pop-up menu by
pressing popuprrop MENU orMENU. Contents in the pop-up
menu vary depending
on the disc.
Playback of Content from an SO Memory Card
You can play back MP3 /WMA /JPEG files stored in an SD
Memory Card.
You can store picture-in-picture commentary,
subtitles or other extras for SD-ROM
ver. 2(Profile 2.0/ Profile
1
.1) files in an SD Memory Card and play back with the BD-
video.
Playing back AVCHD files
This unit supports playback of AVCHD format files (new format
for high definition video camcorders) recorded
on disc. Your high
definition personal archive
is playable in HD quality.
x.v.Color
This unit supports playback of video contents on discs recorded
with "x.v.Color" technology.
To watch this video content with
the "x.v.Color", aTV or other display device supporting both
video image reproduction using the "x.v.Color" standard and
capable of manually switching it's color setting is required.
Please refer
to the owner's manual of your display device for
further information.
Wi-Fi CERTIFIED
The Wi-Fi CERTIFIED logo is an assurance that Wi-Fi Alliance
has tested aproduct
in numerous configurations and with a
diverse sampling of other devices to ensure compatibility with
other Wi-Fi CERTIFIED equipment that operates
in the same
frequency band.
Blu-ray 3D Feature
This product can play 3D contents through an HDMI cable.
To implement the 3D effect, connect a3D device (3D-compliant
AV receiver, 3D-compliant TV) to the product using an HDMI
cable, and play the 3D content while
wearing 3D vision
glasses.
Easy and simple connection to your HDTV via HDMI
Connect this unit to your HDTV with one single HDMI (High-
Definition Multimedia Interface) cable.
It is recommended to
use aHigh Speed HDMI Cable for better compatibility. The high
definition video output signal will be transferred to your HDTV
without conversion to analog signals, so you will get excellent
picture and sound quality.
Thanks to other multiple outputs, you can also easily connect
to your home theater system or amplifier.
HOMI CEC (Consumer Electronics Control)
This unit supports HDMI CEC, which allows integrated system
control over HDMI and
is part of the HDMI standard.
This function may not work properly
on some devices.
HDM11080p/24F output (BD only)
This unit is equipped with afeature which can provide the
smooth movement
in the playback of film originated material
with the frame rate of 24 frames per second with progressive
scan. (Available only when the TV
is connected by an HDMI
cable and compatible with 1080p/24F frame input.)
Refer to
"Display Setting" in "Customizing the Function
Settings" on page 29.
Copyright protection system
To play back the digital video images of a SD /DVD via an HDMI
connection, it is necessary that both the unit and the TV (or
an
AV amplifier) support acopyright protection system called HDCP
(high-bandwidth digital content protection system). HDCP is
copy protection technology thatcomprises data encryption and
authentication of the connected
AV device. This unit supports
HDCP. Please read the operating instructions of yourTV (or AV
amplifier) for more information.

TOSHIBA •• ~=~""~
II
II
II
:2
•..
<!>
H~~;l
ntification of Controls
4* 5* 6* 7*
3
2
1
Front panel
(*) Notes:
1. These indicators are located in the sensor field.
2. When this unit is off, these indicators are dimmed. If afin-
ger
is brought close to the sensor field, the indicators will
be invoked and light
up.
1. Disc tray
2. Remote sensor
3. Display
•Refer to "Front Panel Display" on page 10.
4. OPEN/CLOSE ~ indicator
•When invoked (white), tap to open/close the disc tray.
5. STOP. indicator
•When invoked (white), tap to stop playback.
6. PLAY ~ indicator
•When invoked (white), tap to start playback.
8
7. ON/STANDBY indicator
•When invoked (white), tap to turn on the unit, or to turn
the unit into the standby mode.
(To completely turn off
the unit, you must unplug the
AC power cord.)
8. SO card slot
How to Power On Your Unit?
1. Connect to astandard AC outlet to supply power to this
unit, the ON/STANDBY indicator lights
in red and then
turns white at once.
2. After about 10 seconds, the ON/STANDBY indicator will
turn red automatically.
3. Touch the ON/STANDBY button to turn on the unit. The
ON/STANDBY indicator will remain white (ON mode).
Rear panel
123 4 5 6
7 8 9
1. AC power cord
•Connect to astandard AC outlet to supply power to this
unit.
•Unplug this cord from the
AC outlet to completely turn
off the unit.
2. LAN terminal
•Use to connect anetwork equipment with LAN cable.
3. HDMI OUT jack
•Use to connect aTV with an HDMI compatible port via
an HDMI cable.
4. OPTICAL jack
•Use to connect an AV receiver /amplifier, Dolby Digital /
DTS decoder or other device with adigital audio optical
input jack using adigital audio optical cable.
5. COMPONENT VIDEO OUT jacks
•Use to connect aTV with component video inputs using
acomponent video cable.
6. MULTI CHANNEL AUDIO OUTPUT jacks
•Use to connect an AV receiver /amplifier with aaudio
cable.
7. USB jack
•Use to connect USB flash drives (not included).
8. AUDIO OUT jacks
•Use to connect a TV, an AV receiver /amplifier or other
device with acomposite audio cable.
9. VIDEO OUT jack
•Use to connect a TV, an AV receiver or other device with
acomposite video cable.

ing the Remote control
Remote control
No. Item ;Description
18
ASPECT Press to adjust aspect ratio in full
15 stop mode.
16 2OPEN/CLOSE
~
Press to open or close the disc tray.
117 3SETTING Press to display the settings
in
home menu.
218 4HOME MENU Press to display the Connected
in
319 home menu.
Press to switch picture-in-picture
420 feature on
or off (only applicable
5BONUSVIEW to SD-video which
supports the
PIP function). For
more details,
5
21
see "PIP (SONUSVIEW) Setting"
on page 23.
Same as SKIP
~ /SKIP ~1.
22
..... /~ For detailed operations, please
6refer to SKIP
..... /SKIP ~1.
Press to select aviewing angle if
ANGLE multiple angles are available on
6the disc.
VOLUME +/-
Press to adjust the volume.
723 AUDIO Press to select the
audio mode.
8SUBTITLE Press to display the subtitle menu.
924 Press to return to
the previous
RETURN
25 menu.
10 26 Press to adjust the brightness of
11
27 7DIMMER display on the front of the Slu-ray
28 disc player.
12 •Press to select items on some
29 SD contents.
8
RED/GREEN/
•When file list /thumbnail list is
30 BLUE /YELLOW shown, press to switch between
13 pages.
31
9
REV~
During playback, press to fast
32 reverse the playback.
14 33 •During playback, press once to
return to the beginning of the
current title, chapter, track or file.
10 SKiP
.....
•During playback.
press twice
TOSHIBA to return to the previous title,
chapter, track
or file.
•During the JPEG playback, press
to return to the previous file.
•Press to pause playback.
11
PAUSE II
•When playback is in pausemode,
press repeatedly to forward the
playback step by step.
12
II~
Press to advance one frame.

13
14
15
16
17
18
19
20
Number buttons
GOTO
ON/STANDBY
POPUPITOP MENU
PIC
INFO
RESOLUTION
MENU
o In playback mode, press GOTO,
then press the number buttons
to enter atitle, chapter, track,
time or file number.
o In menu mode, press to enter
the parental code password.
Press to display the search
menu.
Press to turn
on the unit, or to turn
the unit into the standby mode.
(To
completely turn off the unit, you
must unplug the power cord.)
oDuring Blu-ray Disc playback,
press
to open amenu that
lets you control Blu-ray Disc
playback.
oDuring DVD playback, press
to open the DVD menu (if
available).
In playback mode, press to adjust
picture quality according to your
preference (Actual effect
to picture
may vary depending on
TV.):
o E.P.M (Enhanced Picture Mode):
The picture is sharper with
enhanced color.
oSharpness
Press to display disc information.
Presstoselectthevideo resolution
in full stop mode.
Press to return to the previous
menu.
[Installing batteries
Install the batteries (AAAx2) matching the polarity indicated
inside battery
compartment of the remote control.
1Open the cover.
2Insert batteries.
Make sure to match the +and - on the batteries to the
marks indicated
in the battery compartment.
Caution: Never throw balleries into afire.
Notes:
o Do not mix different battery types or combine used batteries
with new ones.
oIf the remote control does not operate correctly, or if the
operating range becomes reduced, replace both balleries
with new ones.
oIf the batteries are dead or if you will not be using the remote
control for along time, remove the batteries to prevent battery
acid from leaking into the ballery compartment.
21
22
23
24
25
26
27
28
29
30
31
32
33
2nd AUDIO
JJ../T/"'/~
OK
2nd SUBTITLE
FWD~
PLAY~
SKIP~
STOP.
REPEAT
RANDOM
A-B
CLEAR
ENTER
In PIP mode, press to turn the
audio for the secondary video
on
or off. For more details, see "PIP
(BONUSVIEW) Setting" on page
23.
Press to select items or settings.
press
to confirmor .select menu
Items.
In PIP mode, press to turn the
subtitle for the secondary video
on or
off.
During playback, press to fast
forward the playback.
Press to start playback or resume
playback.
oDuring playback, press to skip to
the next title, chapter, track or file.
oDuring the JPEG playback,
press to go to the next file.
Press to stop playback.
Press
to play back the disc in slow
motion.
Press to toggle between various
repeat modes.
Press to turn random function
on
or off.
Press
to play back adefined
section between point Aand B
repeatedly.
Press to clear an input error.
Press to confirm or select menu
items.
3Close the cover.
91

Operating with the remote control
Point the remote control at the remote
sensor and press the buttons.
-- -
II0
~ II
30'
Within about 5 m
~
II· ...
Distance:
About 5 m from the
front of the remote
sensor.
Angle:
About 30° in each
direction ofthe front of
the remote sensor.
• Do notexpose the remote sensor of the Blu-ray disc player
to astrong light source such as direct sunlight or other
illumination. If you do
so, you may not be able to operate
the Blu-ray disc player via the remote control.
Notes:
•Direct the remote control at the remote sensor of the Blu-ray
disc player.
•When using the remote control, press the buttons at intervals
of about 1second to ensure the correct mode of operation.
•
Do not drop or give the remote control ashock.
• Do not leave the remote control nearan extremely hot or humid
place.
•Do not spill water or put anything wet
on the remote control.
•Do not open the remote control.
•If the remote control is not going to be used for along time,
remove the batteryto avoid damage caused
by battery leakage
corrosion.
Front Panel Display
12 3 45678
TRK
HDMI
9
CD
~
s;:iis
t~m
~~~!j
.
t~m
t~IJ
•
t~IJ
t~;IJ
t~I!1
10
... ~-
iL!~j
i!.~~J
iLnJ
•
iL~~J
:::0:: •:
::; :
~LnJ
:::;:
:!.::':
::.::.; ::.;:.:
11
1. PLAY indicator
Lights when playing.
2. PAUSE indicator
Lights when paused.
3. DVD indicator
Lights when a DVD disc is inserted.
4. CD
indicator
Lights when aCD disc is inserted.
5. TRK (TRACK) indicator
Lights when aCD/MP3 disc is inserted.
6. Audio Channel indicator
Shows the audio channel of the current DVD/BD.
7. HDMI
indicator
Lights when HDMI TV is connected.
8. a(REPEAT) indicator
Illuminates when REPEAT is pressed.
9. ~ , ..... SKIP indicator
Lights while in fast forward Ifast reverse mode.
110
10. Resolution indicator
Shows resolution of video output.
11. Character indicators
Displays various kinds of information such as elapsed time
or message, etc. (See
Example shown as below.)
!
fi
r"fi.
n
.:::J:
,
L.·
1[-Indicates the
!!...J
1!...J •
i!...}
c::~
elapsed time
......
1
......
(._-
i-
Closing the
,
......
..... t. .J
..... !i.•... disc tray
.. H
°T"1
1-
Indicates that a
.. LJ
Blu-ray disc
is
inserted
f .. ··!
i'-":
'-r°i
hj
r·· ..
1-
~ ••• 2:
~
Loading adisc
I. ..... t .. .!
1i
.. L.!
i
\j
j :
: ...... :

nnecting to a TV
Connect the Blu-ray player to your TV.
1. Choose the appropriate connection, then proceed to the corresponding instruction (A, B or C) on the
next page.
Best(Supports up to 1080il1080p, 1080p/24F resolution.)
GOTO ... A
... "..
Your TV
~
~ ...
HOMI cable
No analog audio connection required.
•
To enjoy the viewing of 30 content, HOMI connection with High Speed HOMI cable must be required.
HDMI Cable NOT INCLUDED
Better(Supports up to 1080i resolution.)
COMPONENT
VIDEO IN
Y
il
"'IF
component video cable
composite audio cable
YourlV
High
Definition
TV
Go To B
... ~
ComponentVideo Cable NOT INCLUDeD
Basic(Supports only 480i resolution.)
composite audio video cable
YourlV
•
••••
........ .. .
Go To
... ~
c
•Connect this unit directly to the TV. If the composite audio /video cables are connected to aVCR, pictures may be
distorted due to the copyright protection system.
CompositeVideo /Audio Cables INCLUDED
111

2. Connect the cables by following the illustrations below.
Connecting to aTV using an HOMI cable (Best)
HDMIOUT
Your TV
0
X
~
m:=3
X
HDMlcable
A
Notes:
• 00 nottiltthe connector when inserting it into the HOMI jack, and make sure the shapes of the jackand the connector
are matched.
•When using non-HOCP compatible
TV, the image will not display properly.
•An HOMI cable carries both video and audio signals. If you want to use TV speakers, you do not need to make an
additional audio connection if you are using an HOMI cable.
Connecting to aTV using acomponent video cable (Better)
... :
.. -:
... :
.' .
.-----,.......... !
composite audio cable
OED
_---- ..... component
video cable
B
Connecting to aTV using an AN cable (Good)
c
I: 1.
0
•.
~~-
u=
VIDEO IN
~
~
L
G)
AUDIO IN
,- ... ~cb
composite audio video cable
1
12

nnecting to an Audio System
•When you change the connections, all devices should be turned off.
•Refer to the manual accompanying external devices for more information.
Via 2-Channel Analog Audio Output
Stereo system
composite audio cable
Via Digital Audio Output
digital audio optical cable
AV receiver Iamplifier
I
1"",,1°1
• 1:::11::::::1 0 0,
•••••••• ' •• ' c:::::I c:::::I
.----'---.
OIGrrAl AlIOlO INPUT
OPTICAL
[iJ
Via HDMI Audio Output
HDMIOUT
AV receiverIamplifier
with an HOMI input jack
~ 1".",
1
°1
/cc SO
/=
~
~
HDMI cable
Digital Audio Optical Cable and HDMI Cable NOT INCLUDED.
13
1

twork Connection
Your Blu-ray disc player can be connected to your home network:
By connecting an Ethernet cable to the ETHERNETjack on the rear of your player and to awired hub or router. Using
awired network provides the best performance, because the attached devices connect directly to the network and are
not subject to radio frequency interference.
By connecting through the built-in wireless device and awireless access point or router.
Connecting your player to awired router:
•Connect an Ethernet cable (CAT5 or better with RJ45 connector) to the ETHERNET jack on the back of your player
and to an Ethernet jack on ahub or broadband router. Hub or broadband router
WAN LAN
U UUUUU
5 432 1
Notes:
• Do not connect amodular
phone cable to the ETHERNET
jack.
•When plugging or unplugging
the
cable, hold the connector
on the end of the cable. When
unplugging, do not pUll on the
cable. Press down the lock tab
and pull the connector out of
the jack.
•Because there are various
connection configurations,
follow the instructions from
your telecommunication carrier
or Internet service provider.
--
I····"""
=
LAN
Networking equipment
(modem, etc.)
Internet j
,/(~J='r=\
• '_: l
. ':" ._-;_ ... ~~-_._; ...... )
~,- . '-.j
·i\~~'\~lt;~I:/
Connecting your player to awireless access point or router:
Your Blu-ray disc player has an integrated Wi-Fi device and antenna. No physical connection to the wireless router is
necessary.
•Configure your player to access the wireless access point or router. For more information, see "Configuring awireless
Internet connection" on page 36.
•The network configuration and connection method may vary depending on the equipment in use and the network
environment. Your Blu-ray disc player
is equipped with an IEEE 802.11 nwireless module, which also supports the
802.11 alb/g/n standards. For the best wireless performance, we recommend using an IEEE 802.11 ncertified Wi-Fi
network (access point or wireless router).
Modem Port
Modem Cable
Notes:
• You must use awireless IP sharer that supports IEEE 802.11 alb/g/n.
(n is recommended for stable operation of the wireless network.)
•Wireless LAN,
in its nature, may cause interference, depending on the
use condition (AP performance, distance, obstacle, interference by
other radio devices, etc.).
•Set the wireless
IP sharer to Infrastructure mode. Ad-hoc mode is not
supported.
•When applying the security key for the AP (wireless IP sharer), only
the following is supported.
1) Authentication Mode: WPAPSK, WPA2PSK
2) Encryption Type: WEP, TKIP, AES
1
14

nnecting the Speakers (For 7.1 A udio Channel)
You can connect the speakers as shown in the following diagram to obtain the 7.1 audio channels effects. Using the audio
cables, connect the MULTI
CHANNEL AUDIO OUTPUT (SBL, SBR, C, SW, SL, SR, FL &FR) terminals on the rear of
the Blu-ray disc player to
7.1 Channel ANALOG AUDIO IN terminals of your Amplifier.
For speaker configuration, please refer to
"Speaker Setting" on page 32.
7.1 Channel Amplifier
E r-g1~---'
Notes:
•Please turn the volume down when you turn on the Amplifier. Sudden loud sound maycause damageto the speakers
and your ears.
•The position of terminals may vary depending on the Amplifier. Please refer to the user's manual of your Amplifier.
•The front left and right outputs on your player and
7.1 channel amplifier must be connected to hear disc menu audio
from certain Blu-ray discs.
•When connecting to a
5.1 channel home theateror receiver, connect all the MULTI CHANNEL AUDIO OUTPUTjacks
from the player except for the SBL (Surround Back Left) /SBR (Surround Back Right) outputs.
15
1

~~l1lF'sitioning the Speakers (For 7.1 Audio Channel)
How you set up your speakers can affect the bass and the sound field. Note the following points:
•Place speakers on flat secure bases.
•Placing speakers too close to floors, walls, and corners can result
in excessive bass. Cover walls and windows with
thick curtains.
Keep your speakers at least 10 mm away from the system for proper ventilation.
Setup example (For 7.1 audio channels)
Surround Back speakers
(may
be elevated above
the listener)
AV receiver
II· ..
Main unit
Center speaker
Place the center speaker directly
in front of the
listening area, either above
or below the TV.
Vibration caused
by the speaker can disrupt the
picture if it
is placed on directly on the TV.
-
II I,,! I 101
DO I0 0
c::::J c::::::J
To allow for proper ventilation and to maintain
good airflow around the main unit, position it with
at least 5
cm of space on all sides.
Left & Right Surround speakers
(may be elevated above
the listener)
Place the
AV receiver directly in front of the
listening area, either above
or below the TV.
Pt ---
Place the left and right front
speakers equidistant from the
center speaker, about 30'
angle from the center channel.
Front speakers Subwoofer
Place to the right or left of the
TV, on the floor or asturdy
shelf so that it will not cause
vibration. Leave about 30
cm
from the TV.
Place the surround back speakers behind the
listening position -slightly to the left and right -
at about 140'·150'from the center speaker.
Place the left and right surround speakers to the
left and right side of the listening position,
in line
with or slightly behind the listening position -
about 90'·110' from the center.
Note:
The above setup illustration is abasic overview on what to expect when hooking speakers up to your home theater system. The
placement may vary depending
on how many and what type of loudspeakers you have, as well as your room size, shape, and
acoustical properties.
116

_S_D_M_em_o_r_y_C_a_rd_(_8_M_B_-_2_G_B_) __ MP3, Windows Media TM
SDHC Memory Card (4 GB -8 GB) Audio, JPEG, picture-
in-picture commentary,
_m_i_ni_S_D_C_a_rd_(;,..8_M_B_._2_G_B....:) subtitles or other extras
microSD Card (8 MB -2 GB) for BD-ROM
ormation on Playback
Before you start playing back a disc, read the following
information.
Playable Discs and Files
Readable cards Playable files/data
microSD Card
adapter
~~~~~OSD
•This unit supports SD Memory Card with FAT12/FAT16
file system, and SDHC Memory Card with FAT32 file
system.
•This unit does not support NTFS file system.
•This unit may not read the
SD Memory Cards formatted
on acomputer. If that is the case, please reformat the SD
Memory Cards in this unit and try again.
•This unit does not support miniSDHC and microSDHC
Memory Card.
•
For miniSD Card and microSD Card, the adapter is
necessary.
Unplayable Discs and Files
•Portions of this product are protected under copyright
law and are provided under license by ARIS /SOLANA /
4C.
•Please keep the SD Memory Cards in their cases when
you are not using them.
•
Do not try to open or modify the card.
• Do not touch the terminal surface with your fingers or
any metals.
•
Do not attach additional labels or stickers to cards.
•
Do not remove the label of the SD Memory Cards.
•This unit recognizes up to 8characters of file name in
the SD Memory Card. Characters after 8th will not be
displayed.
R
Logos
RW
~
a'u·rayOisc
[illo§©
DIGITAL AUDIO
V IDEO
cdJoOm ,-llCOMPACT
DIGITAL AUDIO L.OJD~~
IBiWillmIil ~
rr!l COMPACT
lQjD~[]5 ,-llCOMPACT
DIGITAL AUDIO LfuO~[]5
~~
Playable discs
Blu-ray Disc
- BD-ROM (single I dual layer)
- BD-RE (single I dual layer)
(Recorded in BDMV format)
- BD-R (single I dual layer)(Recorded
in BDMV format) (Unclosed discs
may not be played back.)
DVD-ROM
DVD-RW
DVD-R
CD·DA (audio CD)
CD·RW
CD-R
This unit is compatible to play back the following discs /
files.
To play back adisc /file, make sure that it meets the
requirements for region codes and color systems as
described below.
You can play back discs that have the
following logos.
Other disc types are not guaranteed to play back.
•This unit cannot playback the disc contents protected by
Windows Media™ Digital Rights Management (DRM).
The following discs will not
be played back in this unit.
•CD-ROM
•CD-I (compact disc-interactive)
•DVD-RAM
•VSD (video single disc)
•DVD·audio
•
HD DVD
•VIDEO CO
•Unfinalized disc
•
SACO
• SO / OVO / SO Memory Card contains OivX® files.
• SO / OVO hybrid disc (played back as aSD-video only)
•
SO that contains AVCHO files
•OVO-RW/-R recorded in non compatible recording
format.
•Super Audio
CD -Only the sound on the CD layer can be
heard. The sound on the high-density Super Audio CD
layer cannot be heard.
•Playability of dual discs are not guaranteed.
CD-
Card
Card,
Media
DVD-RW/-R
Playable files
AVCHD
DTS-CD
Windows Media™ Audio
JPEG
MP3
_________ BD-RE/-R, DVD-RW/-R,
RW/-R, SD Memory
--------- (including SDHC), miniSD
microSD Card

[Color Systems [Structure of Disc/SO Card Contents)
Audio CD is divided into tracks.
The contents of
SO I OVO I AVCHO are generallydivided into
titles. Titles may be further subdivided into chapters.
audio CD
track 2track 3track 4track 5
IJn~ ~IIJ.I'.I'J "J IJ.I'nl~1 .l'JJn~
track 1
BO I OVO I AVCHO
..- title 1 _I' title 2
<h'P:' 1 ~ [i ~ <h,ptee]
SO-video and OVO-video are recorded in different color
systems throughout the world. The most common color
system is NTSC (which is used primarily
in the United
States and Canada).
This unit has been designed to play back SO-video with
region "A" and OVO-video with region "1" or
"AL~'. You
cannot play back SO-video or OVO-video that are labeled
for other regions. Look for the symbols on the right
on your
SO-video or OVO-video.
If these region symbols do not appear on your SO-video or
OVO-video, you cannot play back the disc
in this unit. The
letterornumberinside the globe refers to region ofthe world.
ASO-video or OVO-video labeled for aspecific region can
only be played back
in the unit with the same region code.
[Region Codes
SO-video
Data discs, USS device,
SO Memory Cards containing MP3
IWMA IJPEG are divided into folders, and the folders are
subdivided into files.
1-----MP3 / WMA/ JPEG-----I
.- folder (group) 1 _ •folder (group) 2 ---:::----::--_1
file 1file 2file 3file 4file 5
OVO-video
1
18

ying a Disc
This section shows you the basics on how to playa disc.
[Basic playback ~ ~ <R]:t4iJ ~:m
CAUTION:
Keep your fingers well clear of the disc tray as it is closing.
Neglecting to do
so may cause serious personal injury.
Preparations
•When you want to view adisc, turn on the TV and select the video input connected to the Blu-ray disc player.
OPEN/CLOSE
I ~ I
1Press the ON/STANDBY button.
ONISTANDBY
IT]
The Blu-ray disc player turns on.
2Press OPEN/CLOSE.
OPEN/CLOSE
I ~ IThe disc tray opens.
3Place the disc on the disc tray.
_~ WI'h 'he playback side
down
4Press OPEN/CLOSE
to close the disc tray.
OPENICLOSE
Playback starts.
I ~ I
If you insert aBlu-ray disc or aDVD that contains
atop menu, amenu may appear.
Use'" fAf ~ f ~
to select the title you want to view, then press OK
to start playback.
•
You may need to press the POPUPITOP MENU or
MENU button to display disc menu (depending on
the actual Blu-ray disc or DVD.)
• To start playback in the stop mode
Press ~ PLAY.
• To pause playback (still mode)
Press II PAUSE during playback.
To resume normal playback, press the PLAY button.
•The sound
is muted during still mode.
• To stop playback
Press. STOP. The home menu is displayed.
For Blu-ray discs, press "'fA to select BD-ROM, then press
OK to start playback at the beginning of the disc.
For DVDsfaudio CDs, press
~ PLAY to resume normal
playback.
•Depending
on the disc, playback starts where it stopped
or at the beginning of the disc.
•
If you press. STOP twice, playback stops completely. To
stat playback again, press ~ PLAY. Playback starts at
the beginning of the disc.
• To remove the disc
Press OPEN/CLOSE.
Remove the disc after the disc tray opens
completely.
Be sure
to press the OPEN/CLOSE button
to close the
disc tray after you remove
the disc.
• To turn the power off
Press ON/STANDBY button to turn the unit off.
19
1

,riable Speed Playback
You can play discs at various speeds, and resume playback from the location where you stopped playback.
Playing in fast reverse Iforward directions C?m ~~J CJfiI ~a
Press ~ or ~ during playback.
~ :Fast forward playback
~: Fast reverse playback
Each time you press this button, the fast-forward
or fast-reverse speed changes
in the following
sequence:
Fast x2-+- Fast x4-+- Fast x8-+- Fast x16
-+- Fast x32 -+- Fast x64 -+- Fast x128.
•To resume normal playback
Press ~ PLAY.
Notes:
•The Blu-ray disc player mutes sound and subtitles during
reverse and forward scan.
•The playback speed may differ depending on the disc.
Playing frame by frame QDI CF~ ultrA;
Press II~ during still playback.
~ Each time you press this button, the picture
advances one frame.
•To resume normal playback
Press ~ PLAY.
Note: The sound is muted during frame by frame playback.
Playing in slow motion cz.m ~'ml v.
Press ... during playback.
~ Each time you press this button, the slow-
~ motion speed changes in the following
sequence:
Slow x1/2 -+- Slow x1/4 -+- Slow x1/8
•To resume normal playback
Press ~ PLAY.
Notes:
•The sound is muted during slow-motion playback.
• 3 speeds are available.
eating aDesired Section
Normally, Blu-ray discs and DVDs are divided into titles, and the titles are sub-divided into chapters. Audio CDs are divided
into tracks. You can quickly locate any specific title, chapter, or track.
Locating atitle using the top menu OJi" cr~ v:m
1Press POPUPITOP MENU.
POPUPITOP MENU
o
The top menu appears on the TV
screen.
e.g.
2
3
Press TIAI ... I ~ to select the title you
want.
If the titles in the top menu are assigned anumber,
you can directly locate aspecific title by pressing its
designated number with the number buttons.
Press OK.
Playback starts from Chapter 1of the selected title.