TOTMC EasyCAP003 User manual
USB 2.0 Video Capture Adapter
Quick Start Guide
Overview
Thank you for choosing TOTMC USB 2.0 Video Capture Adapter.
With this adapter, you can capture the analog video, such as movies, TV shows, or life video, to your computer. You
can also use it to capture the video from XBOX or some cameras. Once the video is captured to your computer, you
can edit the digital video and share them to your iPod, PSP, Mobile Phone or upload them to internet.
Contents in the package:
TOTMC USB 2.0 Video Capture Adapter
Installation CD
Quick Start Steps
Step 1: Install driver and application
1. Insert the Installation CD into the CD/DVD drive of your computer.
2. Open the Window Explorer and select CD/DVD drive.
3. In the Winder Explorer Window of CD/DVD drive, click on the file "autorun.exe".An installation window
will pop up on the screen.
4. Click on "Install Driver" on the installation window.
5. The computer starts to install the hardware driver. Click "Next" and/or "Finish" button following the
direction of installation programmer to complete the driver installation.
6. Plug the USB Video Capture into an USB2.0 port of your computer.A message window "Found the new
hardware" will appear on the screen. Wait until another message widow "Device is now installed and
ready to use” appears on the screen. The automatic hardware driver installation is complete.
7. Later, is necessary, you can verify that the driver is installed correctly by using Device Manager. Please
refer to the User Guide Manual for this verification.
8. Go back to the installation window in step 3 above and click "Install Showbiz 3.5" on the installation window.
9. The computer starts to install the application. Click "Next" and/or "Finish" button following the direction of
installation programmer to complete the application installation. When prompted, please enter your name and
serial number of application software. The serial number is printed on the back of CD envelope.
Step 2: Connect the adapter to the computer and analog video device:
1. Follow the figures in next page to complete the connection. The analog video device can be Video
recorder, DVD player, Video camera, Set-top box, Game player or any device which provides analog video
signal.
2. The figure on the right is for the analog video device with a SCART interface. A SCART Video/Audio adapter is
needed to complete the connection. The switch on the SCART Video/Audio adapter should be set to
"OUTPUT".
3. In case the analog device is too far away from the computer, additional Video,/Audio or S-Video cable is
needed to complete the connection.
Step 3: Capture analog video to your computer:
1. Double click “ShowBiz 3.5” icon on your desktop of your computer. The ArcSoft ShowBiz window will appear on the
screen.
2. Click Capture to enter the capture panel.
3. On the capture panel, do the following:
•Select “ezcap Video Grabber” in “Source”,
•Select either “Composite” or “S-Video” in “Video input”, depending how the analog video device is connected to the
adapter.
•Select “USB Pin Source” in “Audio Device”.
•Click “Video Settings” and select either “NTSC_M” or “PAL_B” in Video Standards, depending on the format of
analog video to be captured.
4. Start playing the video in your analog video device. The video image should appear on the Capture panel.
5. Click the “Capture” button to start capture. Click the “Capture” button again to stop the capture.
Step 4: Edit the captured video file:
1. Once you finish the capturing, click “Edit” on the ArcSoft ShowBiz window to enter the Edit panel.
2. Drag the video files in the video window to the story board/timeline window to compile your digital video file.
Step 5: Output the compiled digital video file:
1. After you finish the editing click “Produce” on the ArcSoft ShowBiz window to enter the Produce panel.
2. Depending on your need, you can output your compiled digital video file to a DVD or a file to be uploaded to iPod, PSP
or mobile phone, or a file to be uploaded to YouTube.
User Guide Manual
Go back to the installation window in sub steps 1 through 4 of the Step 1 above and then click “Manual” on the
installation window. A window of user guide appears on the screen, in which you can find all the details of each
step mentioned above.
Support：
Mail：[email protected]
Tel：(086)02023334963
Website：http://www.deekea.com
Table of contents
