TP active fun TP885 Alaska Quick guide

TP885 Alaska
TP886 Galapagos
TP887 Fiordland
Instructions for assembly, maintenance and safe use.
Please retain for future reference.
Robovision Ltd t/a TP Toys
Unit 11, Enterprise Way, Flitwick, Bedfordshire, MK45 5BX England
www.tptoys.com
THIS PRODUCT CONTAINS SMALL PARTS AND IS NOT SUITABLE FOR CHILDREN UNDER 36 MONTHS.
CONTAINS SMALL PARTS. CHOKING HAZARD.
ONLY FOR DOMESTIC USE. FOR OUTDOOR USE.
TOY MUST BE ASSEMBLED BY AN ADULT BEFORE USE.
ADULT SUPERVISION IS REQUIRED
CHILDREN MUST NOT USE THE EQUIPMENT UNTIL PROPERLY INSTALLED.
REMOVE ALL PACKAGING BEFORE GIVING TO YOUR CHILDREN.
THIS PRODUCT IS INTENDED FOR USE BY CHILDREN FROM AGES 3 TO 12 YEARS.
ANCHORS THAT ARE SUPPLIED WITH THIS PRODUCT MUST BE FITTED BEFORE USE.
MAXIMUM COMBINED USER WEIGHT FOR SWING FRAMES 200KGS
TP885 ALASKA SINGLE SEAT USER WEIGHT - 60KGS GLIDE RIDE USER WEIGHT - 35KGS PER SEAT
TP886 GALAPAGOS SINGLE SEAT USER WEIGHT - 60KGS GLIDE RIDE USER WEIGHT - 35KGS PER SEAT
TP887 FIORDLAND NEST SWING USER WEIGHT - 120KGS
WARNING!
x2
TP885 Alaska TP886 Galapagos TP887 Fiordland
Build Time
2.5 Hrs
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 1 23/02/2018 14:44

TP885 TP887 & TP886
2
276cm 124cm
179cm
340cm 382cm 340cm
119cm
240cm
Important advice for assembly, maintenance and safe use
1. Toys must be assembled by an adult before use exactly in accordance with the instructions.
2. Check all parts are present before you start to assemble the product.
3. Place small parts on a tray or similar, to ensure they are not lost.
4. If any parts are missing do not use the product until the replacement parts are fitted.
5. Remove all packaging before giving to your children or allowing them to play with this product.
6. Ensure your product is sited on level ground. Failure to do this may put additional stress on connections and joints
and in time could cause them to fail.
7. Ensure your product is located on a soft impact surface like grass. Never locate your product on hard surfaces like
concrete or asphalt.
8. Children must not use this product until properly installed.
9. Adult supervision is required at all times to ensure children play safely. Ensure children’s clothing is appropriate for
the play activity.
10. Equipment should be checked by an adult at the beginning of each season and at regular intervals during the
usage season to ensure it is safe.
11. Pay special attention to all connections and fastenings.
12. Parts may need to be replaced if they show signs of wear and tear. Replace any defective parts in accordance
with these instructions.
13. Any changes to this toy, e.g. changing or adding an accessory, must be done in accordance with our instructions.
Failure to do this will render your guarantee null and void and may make your product unsafe.
14. The age recommendation for this product is clearly stated on the packaging and these instructions. Please adhere
to it at all times.
15. When you dispose of this equipment please do so responsibly.
Safe play free space area
The safe play area refers to the zone extending 200cm
around the toys on all sides and 250cm above the toy.
The safe play area must be free from all obstacles.
Dimensions
TP885 Alaska TP886 Galapagos TP887 Fiordland
2m
2m
2m
2m
2m
2m
TP885
TP886
TP887
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 2 23/02/2018 14:44

TP885 TP887 & TP886
3
Know Your TP Round Wood.
Timber is a very popular choice for active outdoor toys. For reasons of affordability and the environment, all wood playset
manufacturers use softwood rather than hardwood. Each piece of timber is unique, bearing its own knots, cracks and
variations in colour.
Round timbers tend to come from younger smaller trees and are complete tree poles, stripped of any bark and other
rough materials but subject to no further processing apart from the application of a suitable environmentally friendly
preservative.
Our round wood frames are rustic in appearance. The heartwood that they are made from naturally has cracks and
splits. Theses cracks will change over time due to atmospheric conditions. When wet, the wood will take in water, swell
and the cracks will close up (not disappear), when dry the wood contracts and the cracks will open up.
Whilst this can sometimes seem alarming, the round timber frames are designed and dimensioned to ensure these
natural characteristics do not have an impact upon the structural integrity of the frame. All of our wooden play frames
are rigorously tested by an independent test house and fully comply with the relevant toy safety regulations.
Because of the natural characteristics of such wood products, it is vital that parents check their play frame regularly to
identify any splintering or lifting of the surface layers of the wood or any exposure of rough wood due to changes in
cracks and splits. Affected areas must be rubbed down using coarse sandpaper to restore a smooth. Safe surface.
Very occasionally these characteristics can develop to a point where replacing the pole may be required. This can be if a
crack is in a particular position or if a crack exceeds certain parameters. Examples of this are:
• Where cracks open up in excess of 5mm in width.
• Where cracks of a significant width extend over half the total length of the timber.
• Where cracks run through fixing points.
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 3 23/02/2018 14:44

4
TP885 TP887 & TP886
3mm & 5mm
Drill Bits
Step Ladder Spirit LevelTape MeasureMallet Combi Drill
Pozi #2
Pozi #3
Screwdriver Wrench
Sockets
10 & 13mm
Spanner
10 & 13mm
MW0223 700mm x14
MW0226 1550mm x2
MW0225 612mm x3
MW0224 850mm x4
MW0221 825mm x2
MW0220 1015mm x2
MW0219 1210mm x2
MW0218 1400mm x2
MW0222 2668mm x4
Not Supplied
Also
Required:
MW0228 795mm x1
Tools - You will need:
Contents please check:
Shovel
MW0203 2250mm x1
MW0200 2700mm x2
MW0202 900mm x1
MW0201 3000mm x1
MW0200 2700mm x2
MW0202 900mm x1
885- 1 Alaska / 887-1 Fiordland / 886-1 Galapagos885-1
885- 2 Alaska / 887-2 Fiordland / 886-2 Galapagos885-2
885- 3 Alaska / 887-3 Fiordland885-3
886-3 Galapagos886-3
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 4 23/02/2018 14:44

5
TP885 TP887 & TP886
6 x 155mm FA9784
x6
M8 x25mm
FA8440
x28
M8
FA5174
x4
70mm FA8439
x20
4.5 x 40mm FA4517
x60 5 x 60mm FA9768 x2
M8 x 120mm FA9771
x4
5 x 80mm FA4521
x16
PM8387
x8
4 x 16mm
FA4527
x18
40mm FA8380
x4
Swing Accessories
Swing Seats supplied vary depending on product purchased.
See page 19 for details.
PM9753
x1
PR9598
TP885 x2
TP887 x2
TP886 x3 960
885-5 / 887-5 /886-5
PR5069
x4 FB6039 x2 FB6038 x1
PM1007
x1
PM1968
x1
TP928
Lime Seat
TP934
Button Seat
TP940
Glide Ride
TP932
Nest Swing
Please note: There may be some fixings left over after the assembly build.
885-4 / 886-4 / 887-4 885- 4 Alaska / 887-4 Fiordland / 886-4 Galapagos
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 5 23/02/2018 14:44

6
TP885 TP887 & TP886
TP885 TP887 TP886 - Deck Assembly
FB6052
x2
70mm FA8439
x4
15mm
1300mm
120mm
1300mm
5mm
1
2
MW0228 795mm x1
MW0222 2668mm x2
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 6 23/02/2018 14:44

7
TP885 TP887 & TP886
1300mm
1300mm
3MW0222 2668mm x2
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 7 23/02/2018 14:44

8
TP885 TP887 & TP886
6 x 155mm FA9784
x6
MW0225
MW0225
MW0225
x6
60mm
60mm
MW0225
3-5mm
3-5mm
MW0225 3-5mm
4
5
3-5mm
MW0225 612mm x3 MW0226 1550mm x2
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 8 23/02/2018 14:44

9
TP885 TP887 & TP886
M8 x 120mm FA9771
x4
M8
FA5174
x4
70mm FA8439
x4
5mm
6
7
M8 x25mm
FA8440
x8
ASSEMBLY TIP
Step
ladders
required.
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 9 23/02/2018 14:44

10
TP885 TP887 & TP886
4.5 x 40mm FA4517
x28
13mm
13mm
1
2
3
4
5
6
7
8 9
10
11
12 13 14
8MW0223 700mm x14
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 10 23/02/2018 14:44

11
TP885 TP887 & TP886
5 x 80mm FA4521
x16
236mm
236mm
236mm
310mm
70mm
70mm
1
1
25mm
25mm
2
x8
1
1
1
1
1
1
1
3mm
9MW0224 850mm x4
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 11 23/02/2018 14:44

12
TP885 TP887 & TP886
4.5 x 40mm FA4517
x32
x2
600mm
1
4
3
2
10
MW0221 825mm x2
MW0220 1015mm x2
MW0219 1210mm x2
MW0218 1400mm x2
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 12 23/02/2018 14:44

13
TP885 TP887 & TP886
PM8387
x8
4 x 16mm
FA4527
x16
x8
11
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 13 23/02/2018 14:44

14
TP885 TP887 & TP886
FB6038
x1
PR9598
TP885 x2
TP887 x2
TP886 x3
TP885 TP887 TP886 - Swing Arm Assembly
70mm FA8439
x2
M8 x25mm
FA8440
x2
Generic view of Top Bar only.
Actual Top Bar will vary
depending on product purchased.
ASSEMBLY TIP
MW0203
12 MW0203 2250mm x1
MW0201 3000mm x1
13
5mm
TP885 & TP887
TP886
MW0201
750mm
TP885 & TP887
TP886
15mm
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 14 23/02/2018 14:44

15
TP885 TP887 & TP886
40mm
FA8380
TP885 x2
TP887 x2
TP886 x3
14
445mm 385mm
Swing Seat Position
1410mm 325mm
Nest Swing Position
445mm
750mm
Swing Seat Position
730mm 385mm
TP940
Glide Ride
Position
TP940
Glide Ride
Position
680mm
100mm
TP885
MW0203 - Double Top Bar
TP887
MW0203 - Double Top Bar
TP886
MW0201 - Triple Top Bar
Locate your swing seats correctly:
5mm
A
A
A
A
A
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 15 23/02/2018 14:44

16
TP885 TP887 & TP886
Generic view of Top Bar only.
Actual Top Bar will vary
depending on product purchased.
ASSEMBLY TIP
70mm FA8439 x2
M8 x25mm Washer
FA8440
x2
15 MW0200 2700mm x2
5mm
70mm FA8439
x2
M8 x25mm
FA8440
x2
16
5mm
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 16 23/02/2018 14:44

17
TP885 TP887 & TP886
70mm FA8439
x2
M8 x25mm
FA8440
x2
Generic view of Top Bar only.
Actual Top Bar will vary
depending on product purchased.
ASSEMBLY TIP
17
x2
Make sure that the fixing points
are centred on the legs.
ASSEMBLY TIP
5mm
MW0202 900mm x1
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 17 23/02/2018 14:44

18
TP885 TP887 & TP886
PM9753
x1 5 x 60mm FA9768
x2
18
Gap
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 18 23/02/2018 14:44

19
TP885 TP887 & TP886
TP880 TP877 TP883 - Attaching Swing Accessories
TP928
Lime Seat
TP934
Button Seat
TP940
Glide Ride
TP932
Nest Swing
Glide Ride and Nest Swing
need to be built before
attaching to the Top Bar.
Please refer to product
instruction manuals supplied
with these products.
IMPORTANT
ASSEMBLY TIP
19
TP885
TP940
Glide Ride
TP928
Lime Seat x2
TP886
TP887
TP940
Glide Ride
TP932
Nest Swing
x2
x2
ASSEMBLY TIP
Step
ladders
required.
ASSEMBLY TIP
Step
ladders
required.
ASSEMBLY TIP
Step
ladders
required.
TP928
Lime Seat
See Stage 14
for Glide Ride
fixing dimension.
ASSEMBLY TIP
See Stage 14
for Glide Ride
fixing dimension.
ASSEMBLY TIP
TP934
Button Seat
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 19 23/02/2018 14:44

20
TP885 TP887 & TP886
Swing Accessories - Height adjustment
PM1968
x1
350mm
Min
350mm
Min
350mm
Min
PM1007
x1
TP940
Glide Ride
TP932
Nest Swing
TP928
Lime
Seat TP934
Button Seat
4 x 16mm FA4527
x2
20
21
Equal spacing
TP821 885 886 887 Roundwood Deck In8000-A 23.02.18 NEW.indd 20 23/02/2018 14:44