TrailPRO TPWHIPS5 User manual

5’ Dynamic LED Whip
Mounting Base
Flag
Remote
RGB Module
Flag Mounting Accessories
TPWHIPS5
DYNAMIC RGB LED WHIP
Please read instructions manual before commencing.
ADDITIONAL PARTS REQUIRED
BEFORE YOU START
INSTALLATION
5 Amp Fuse & Fuse holder
Zip-Ties
Find an appropiate location for the whip to be mounted.
To mount, use a 13mm (1/2”) hole saw to make a mounting hole
or fabricate a mounting bracket.
To make mounting the whip easier disconet the LED section from the base.
To do this pull up on the lock ring collar and seperate(IMAGE 1).
Note: When attaching the LED section back to the base pull up on the
lock ring collar and push back onto the base.
Confirm the silver lock ring is not visible when reconnected
(if visible push the lock ring collar down).
Find an appropriate location to mount the RGB module.
Make sure the cable from the module will reach the whip.
If more length is required use optional extension lead
(Part# TPRGBEXT4 - Sold Seperatly).
OPTIONAL
Switch
Relay
13mm Hole Saw
Use supplied mounting
accessories to secure
flag to the whip.
OPTIONAL
THIS PRODUCT IS FOR OFF-ROAD USE ONLY
!
KIT INCLUDES
Attach whip and test.
To attach or release the whip
from the base, pull up on the
locking collar.
When re-attaching, make sure
silver lock ring is not
visible.
IMAGE 1
1
2
3
LOCK RING COLLAR
SILVER RING
BASE

SPXRGBUBKIT
TPWHIPS5
12V+
IMAGES 2 & 3 show the recommended wiring options.
IMAGE 2: Wiring direct to power and using the Remote or APP to turn the Whip ON & OFF.
NOTE: Use a 5amp fuse on the 12V+ power wire.
IMAGE 3: Using a SWITCH to turn the Whip ON & OFF.
NOTE: A switch, 12V relay & 5amp fuse on the 12V+ power wire will be required for this configuration.
Additional Wiring Information
Red = 12v+
Black = EARTH
Yellow = OPTIONAL: Connect to the right indicator trigger (only recommended when installing
2 Whips).
Green = OPTIONAL: Connect to the left indicator trigger (only recommended when installing
2 Whips).
White = OPTIONAL: Connect to the brake trigger. This willallow the whip to function as an
additional brake light.
WIRING DIAGRAM
5 AMP FUSE
IMAGE 2
87
8586
30
87a
5 AMP FUSE
IMAGE 3 ON OFF

SPXRGBUBKIT
TPWHIPS5
Limited Warranty:
TrailPRO warrants this product to be free of defects in materials and build
for 12 months from the original date of purchase. This warranty is not transferable
and applies to the original purchaser from TrailPRO or authorized reseller in
Australia only. Should service be required under this warranty due to manufacturing
defect or malfunction, TrailPRO will ( at its discretion), repair or replace the defective
product with new or remanufactured product at minimal or no charge.
Damage caused by the following is not covered under warranty: accident, misuse,
abuse, product modication or neglect, failure to follow installation manual,
unauthorized repair attempts. This warranty does not cover incidental or consequential
damages and does not cover the cost of removing or reinstalling the unit(s). Cosmetic
damage due to accident or normal wear and tear is not covered under warranty.
For more information please visit: www.trailpro.com.au
GET THE APP!
RGB REMOTE
Over 20 Different
O
O
O
OO
O
O
v
v
v
v
v
e
e
e
e
e
r
r
r
r
r
2
2
2
2
2
0
0
0
0
0
D
D
D
D
D
i
i
i
i
i
f
f
f
f
f
f
f
f
ff
e
e
e
ee
r
r
r
rr
e
e
e
ee
n
n
n
n
n
t
t
t
t
t
Dynamic Lighting Modes
Monochrome Static Colours
Speed UP/DOWN
Mode UP/DOWN
Brightness UP/DOWN
The TPWHIPS5 can either be controlled by the supplied remote or
the Apple/Android app.
Visit the TrailPRO website for the Apple/Android app.