Transcend TS32GDPB52A User manual

User’s Manual
Body Camera
DrivePro Body 52
TS32GDPB52A
(Version 1.0)

Table of Contents
1. Introduction.....................................................................................................................................3
2. System Requirements.................................................................................................................. 4
3. Getting Started...............................................................................................................................5
3-1 Function Buttons................................................................................................................. 5
3-2 Charging the DrivePro Body 52........................................................................................6
3-3 LED Indicator Table............................................................................................................ 6
4. Recording Videos.......................................................................................................................... 7
5. Taking Photos................................................................................................................................ 8
6. Using the DrivePro Body 52 App................................................................................................ 8
6-1 Downloading and Installing the App.................................................................................8
6-2 Connecting to the DrivePro Body App.............................................................................8
6-3 Playing Videos and Browsing Photos..............................................................................9
6-4 Settings.................................................................................................................................9
7. Using the DrivePro Body Toolbox™ Software........................................................................ 10
8. Precautions.................................................................................................................................. 10
9. IPX4 Water Resistant................................................................................................................. 12
10. Package Contents.....................................................................................................................12
11. Specifications............................................................................................................................. 15
12. Frequently Asked Questions................................................................................................... 15
13. Recycling and Environmental Protection.............................................................................. 17
14. Two-year Limited Warranty......................................................................................................18
15. GNU General Public License (GPL) Disclosure...................................................................19
16. End-User License Agreement (EULA)...................................................................................19
17. Federal Communications Commission (FCC) Statement.................................................. 22

1. Introduction
Transcend’s DrivePro Body 52 is an easy-to-operate wearable video camera that is tailor-made for
police officers, security guards and other professionals to capture real time videos and photos of
events. The Wi-Fi network allows live streaming to your smartphone and modifying the function
setting using the DrivePro Body App.
Attached with the convenient 360° rotatable clip or Velcro to your uniform/jacket, the DrivePro Body
52 features a 130° Wide Angle Lens for the best field of view and records videos in crystal clear Full
HD 1080P (30 FPS) with a F1.8 aperture to ensure both the important details of your actions and
those in the camera’s field are clearly recorded. The handy snapshot function allows you to take
photos while recording. Transcend’s DrivePro Body 52 has a built-in Li-Polymer battery that can
record up to 3.5 hours and only takes approximately 1.5 hours to be fully recharged.
The DrivePro Body 52 has an internal 32GB storage, allowing users to record up to 3.5 hours of
footage. In addition, the camera is rugged and IPX4 water resistant, providing extra protection and
durability. The DrivePro Body Toolbox provides secure encryption function to protect the recorded
data. For enterprises or departments that purchase multiple DrivePro Body cameras, Transcend’s
optional 6-port Docking Station offers the best solution as each port can simultaneously charge and
upload the recorded data to your database.
Features
Smooth and detailed Full HD 1080P recording at 30fps resolution.
Handy snapshot button to take photos while recording (2 million pixels camera).
F1.8 aperture with 130° wide angle lens.
Built-in WiFi to allow live streaming to your smartphone app and modify the function setting.
32GB internal storage.
Record videos in .MOV file format with 12Mbps high video bit rate.
Meets U.S. military drop-test standards and IPX4 water resistant (non-submersible).
360° rotatable clip or Velcro attached for easy operation.
Built-in microphone.
Built-in 1530mAh Li-Polymer battery to record up to 3.5 hours of footage.

2. System Requirements
System requirements for connecting the DrivePro Body 52 to a computer and for using the DrivePro
Body Toolbox:
A desktop or a laptop with a working USB port
Windows®7
Windows®8
Windows®8.1
Windows®10

3. Getting Started
3-1 Function Buttons
or
Warning Indicator
Recording / Wi-Fi Indicator
Power Button
Reset Button
Snapshot / Wi-Fi Button
3.5mm DC IN socket
360° Rotatable Clip
Built-in Microphone
Velcro holder
Buzzer

3-2 Charging the DrivePro Body 52
Before use, please ensure that the battery is fully charged. Charge the DrivePro Body 52 via the bundled USB
2.0 to 3.5mm DC power cable. A flashing orange LED light of the warning indicator is visible while charging;
the orange LED light will turn off when fully charged.
To charge the DrivePro Body 52, you can either:
1. Connect the 3.5mm DC power cable to a wall outlet with the included adapter.
2. Connect the 3.5mm jack of the camera and the USB to a computer.
WARNING:
1. The DrivePro Body 52 only supports FAT32 file format.
2. Do not use the 3.5mm DC power cable on other devices.
3-3 LED Indicator Table
Top View
LED Status Definition

Flashing Recording Memory almost full
Backup mode Transferring data
Solid Backup mode Waiting for backup

Flashing Recording Low Battery
Solid Backup mode / connected to power Charging
Front View

LED Status Definition

Flashing Recording

Flashing Recording with Wi-Fi on
Solid Backup mode / Settings
4. Recording Videos
To start recording, long press the button; you will hear 1 beep, and the red LED light of the
recording indicator will flash during recording. To activate Wi-Fi, long press the button while
recording, and the LED light will flash from red to blue. To stop recording, long press the button
again; you will hear 1 beep. The red LED light will then turn off. One video file is saved for every 3
minutes of recording.
Note: The DrivePro Body 52 stops recording when connected to the computer or docking station.

5. Taking Photos
To take photos while recording, quickly press the button, you will hear 1 beep.
6. Using the DrivePro Body 52 App
Developed for iOS and Android devices, the free DrivePro Body App allows you to wirelessly adjust the
settings of the camera and to live-stream video on your smartphone.
6-1 Downloading and Installing the App
1. Search and download DrivePro Body on your App Store or Google Play.
2. Download and install the DrivePro App.
Once the installation is complete, the App will be displayed on the home screen of your device.
6-2 Connecting to the DrivePro Body App
1. Turn on the Wi-Fi by long pressing the button while recoding, the front LED will turn flashing
blue. Tap the DrivePro Body App icon on your smart device.
2. Tap “Connect”. Please wait for a few seconds for the network to appear.
3. Select the “DriveProBody52” Wi-Fi link (default password is 12345678).
4. Tap the DriveProBody52 icon on the home screen of your mobile device to use the App.

Note:
1. To change the default SSID and password, go to Settings in the DrivePro App.
2. The camera stops recording when you go to Data or Settings, and will resume recording when you
tap Liveview.
6-3 Playing Videos and Browsing Photos
1. Tap Data.
2. To play the videos recorded, tap VIDEO and select the desired file.
3. To browse the photos taken, tap PHOTO and select the desired file.
6-4 Settings
In the Settings menu, you can adjust the settings of video, device, Wi-Fi and System.
Menu options
Resolution: Set the resolution/quality for video recording.
Available options: FHD / 720P
Video Stamp: Display the time of the event being recorded and the video label.
Available options: Disable / Enable
Video Label: Tap to edit the video label to be displayed (default label is Transcend DPB52)
Microphone: Turn on/off the microphone during video recording.
Available options: Disable / Enable
Date Format: Set the date format.
Available options: YY/MM/DD or MM/DD/YY or DD/MM/YY
24-Hour Time: Select the 24-hour or 12-hour time format.
Available options: Enable (24-hour) / Disable (12-Hour)
Light Frequency: Select the appropriate frequency to avoid flashing A/C light.
Available options: 50Hz / 60Hz
SSID: Enter the SSID to wirelessly connect to DrivePro Body 52 (default SSID is
DriveProBody52).
Password: Enter the password to connect wirelessly to DrivePro Body 52 (default password is

12345678).
Version: Tap to upgrade the firmware to the latest version.
WARNING: NEVER remove the power cord or the microSD memory card while the firmware
is being upgraded.
1. The DrivePro 520 will shut down and the red LED light will flash while the firmware is being
upgraded. After the upgrade is complete, the DrivePro will restart automatically.
2. If the DrivePro cannot be turned on due to firmware upgrade failure, please contact
Transcend customer service for technical support.
7. Using the DrivePro Body Toolbox™ Software
The DrivePro Body Toolbox, developed for Windows, features a user-friendly interface that allows you to
easily back up the recorded files to your database.
1. Download the installation files from: http://www.transcend-info.com/downloads
2. Install DrivePro Toolbox software on your desktop or laptop.
8. Precautions
Do not use or store the DrivePro Body 52 in the following places to prevent malfunction or
deformation:
In extremely hot, cold or humid places such as in a car parked in the sun
Under direct sunlight or near a heater
Near strong magnetic fields
In sandy or dusty places
Care and storage of the DrivePro Body 52 lens
Wipe the surface of the lens clean with a soft cloth in the following cases:
When there are fingerprints on the lens surface
When the lens is exposed to salty air such as at the seaside
Store in a well-ventilated location subject to little dirt or dust
To prevent mold, periodically clean the lens as described above
Cleaning

Clean the DrivePro Body 52 surface with a soft cloth slightly moistened with water, then wipe the
surface with a dry cloth. Do not use any of the following as they may damage the finish or the casing:
Chemical products such as thinner, benzine, alcohol, disposable cloths, insect repellent,
sunscreen orinsecticide, etc.
Do not touch the camera with any of the above on your hand.
Do not leave the camera in contact with rubber or vinyl for a long time.
Moisture condensation
If the DrivePro Body 52 is brought directly from a cold to a warm place (or vice versa), moisture
may condense inside or outside the camera. This moisture condensation may cause
malfunction of the DrivePro Body 52.
If moisture condensation occurs, turn off the DrivePro Body 52 and wait about 1 hour for the
moisture to evaporate.

9. IPX4 Water Resistant
The camera body of the DrivePro Body 52 is IPX4 water resistant (not waterproof), offering
protection against splashing water from any direction. However, it is not protected against
pressurized water such as from a shower or tap.
WARNING: DrivePro Body 52 is not water resistant when connected to the power
cable.
Failure caused from incorrect use is not covered by the limited warranty.
Do not use the DrivePro Body 52 in water as it is not waterproof.
Do not use the DrivePro Body 52 in high temperature and high humidity environments (i.e.
saunas, steam and shower rooms).
Do not use the DrivePro Body 52 for a long time in heavy rains to avoid the moisture from
penetrating. Make sure the power cable and adapter are completely dry before charging.
10. Package Contents
The DrivePro Body 52 package includes the following items:
DrivePro Body 52
Adapter
USB 2.0 to 3.5mm DC power cable

Velcro
Note:
Clip & Velcro holders
Quick Start Guide
Warranty Card

11. Specifications
Connect Interface USB 2.0
Storage Capacity Built-in MLC-based microSD, 32GB internal storage
Dimensions 88.4 mm (L) × 52.2 mm (W)× 19.4 mm (H)
3.48” (L) x 2.06” (W) x 0.76” (H)
Weight 88g
3.1 oz
Battery Li-Polymer 1530mAh
Power Supply Input: AC100V-240V, 50-60Hz, 0.4A Max
Output: DC5V 2A
Recording Life Up to 3.5 hours*
Operating
Temperature
-20°C (-4°F) ~ 65°C (149°F)
-20°C (-4°F) ~ 45°C(113°F)*
Video Format H.264 (MOV: up to 1920x1080 30fps)
Water Resistance IPX4
Shock Resistance MIL-STD-810G 526.6-Transit Drop Test
Lens F/1.8, 130° wide angle
Resolution / Frame
Rate Full HD (1920 x 1080) / 30fps
Certification CE, FCC, BSMI
Warranty 2-Year Limited
* Environmental conditions may increase or decrease specifications
* The temperature should be -20°C (-4°F) ~ 45°C(113°F) when using adaptor to charge
12. Frequently Asked Questions
If you have any question or a problem occurs to your DrivePro Body 52, please first check the instructions
listed below before sending your DrivePro for repair. If you cannot find any ideal solution to your question
below, please consult your dealer, service center, or local Transcend branch office for further help. You can
also visit Transcend website (http://www.transcend-info.com/) for more FAQs and Technical Support services
(http://www.transcend-info.com/Support/contact_form).
My computer operating system cannot detect my DrivePro Body 52
Please check the followings:
1. Is your DrivePro Body 52 properly connected to the USB port? If not, unplug and connect it

again. Make sure that both ends of the USB cables are properly connected as shown in the
User’s Manual.
2. Is your DrivePro Body 52 connected to the Mac keyboard? If yes, try to plug it in an available
USB port on your Mac Desktop directly.
3. Is the computer’s USB ports enabled? If not, refer to the user’s manual of your computer (or
motherboard) to enable them.
None of the DrivePro Body 52 buttons are responding.
Please press the Reset button on the bottom of the DrivePro Body 52 with a pointed object such as a
paper clip.
Is the DrivePro Body 52 shockproof and waterproof?
The DrivePro is IPX4 water resistant and meets rigorous U.S. military drop-test standards*.
*Based on MIL-STD-810G 526.6-Transit Drop Test

13. Recycling and Environmental Protection
Recycling the Product (WEEE): Your product is designed and manufactured with high quality
materials and components, which can be recycled and reused. When you see the crossed-out wheel
bin symbol attached to a product, it means that the product is covered by the European Directive
2002/96/EC:
Never dispose of your product with other household waste. Please inform yourself about the local
rules on the separate collection of electrical and electronic products. The correct disposal of your old
product helps prevent potential negative consequences on the environment and human health.
Battery Disposal: Your product contains a built-in rechargeable battery covered by the European
Directive 2006/66/EC, which cannot be disposed of with normal household waste. Please inform
yourself about the local rules on separate collection of batteries. The correct disposal of batteries
helps prevent potentially negative consequences on the environment and human health.
For products with non-exchangeable built in batteries: The removal of (or the attempt to remove) the
battery invalidates the warranty. This procedure is only to be performed at the end of the product’s
life.

14. Two-year Limited Warranty
This product is covered by a Two-year Limited Warranty. Should your product fail under normal use within two years
from the original purchase date, Transcend will provide warranty service pursuant to the terms of the Transcend
Warranty Policy. Proof of the original purchase date is required for warranty service. Transcend will inspect the product
and in its sole discretion repair or replace it with a refurbished product or functional equivalent. Under special
circumstances, Transcend may refund or credit the current value of the product at the time the warranty claim is made.
The decision made by Transcend shall be final and binding upon you. Transcend may refuse to provide inspection,
repair or replacement service for products that are out of warranty, and will charge fees if these services are provided
for out-of-warranty products.
Limitations
Any software or digital content included with this product in disc, downloadable, or preloaded form, is not covered under
this Warranty. This Warranty does not apply to any Transcend product failure caused by any accident, abuse,
mishandling or improper usage (including use contrary to the product description or instructions, outside the scope of
the product’s intended use, or for tooling or testing purposes), alteration, abnormal mechanical or environmental
condition (including prolonged exposure to humidity), acts of nature, improper installation (including connection to
incompatible equipment), or problems with electrical power (including undervoltage, overvoltage, or power supply
instability). In addition, damage or alteration of warranty, quality or authenticity stickers, and/or product serial or
electronic numbers, unauthorized repair or modification, or any physical damage to the product or evidence of opening
or tampering with the product casing will also void this Warranty. This Warranty shall not apply to the transferees of
Transcend products and/or anyone who stands to profit from this Warranty without Transcend’s prior written
authorization. This Warranty only applies to the product itself, and excludes integrated LCD panels, rechargeable
batteries, and all product accessories (such as card adapters, cables, earphones, power adapters, and remote
controls).
Transcend Warranty Policy
Please visit www.transcend-info.com/warranty to view the Transcend Warranty Policy. By using the product, you
agree that you accept the terms of the Transcend Warranty Policy, which may be amended from time to time.
Registro online
Para agilizar el servicio de garantía, por favor registrar su producto de Transcend en
www.transcend-info.com/register durante los 30 días siguientes a la fecha de compra.
Transcend Information, Inc.
www.transcend-info.com
*The Transcend logo is a registered trademark of Transcend Information, Inc.
*The specifications mentioned above are subject to change without notice.
*All logos and marks are trademarks of their respective companies.

15. GNU General Public License (GPL) Disclosure
Firmware incorporated into this product and/or software used for this product may include third party copyrighted software
licensed under the GPL (hereinafter referred to as “GPL Software”). In accordance with the GPL, if applicable: 1) the
source code for the GPL Software may be downloaded at no charge or obtained on CD for a nominal charge by calling
Customer Support within three years of the date of purchase; 2) you may copy, re-distribute and/or modify the GPL
Software under the terms of the GNU General Public License as below or any later version, which may be obtained at
http://www.gnu.org/licenses/gpl.html; 3) the GPL Software is distributed WITHOUT ANY WARRANTY, without even
implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. The entire risk as to the quality
and performance of the GPL Software is with you. Transcend does not provide any support for the GPL software.
16. End-User License Agreement (EULA)
Software license terms and conditions
1. Generally. Transcend Information, Inc. ("Transcend") is willing to grant the following license to install or use the software
and/or firmware (“Licensed Software”) pursuant to this End-User License Agreement (“Agreement”), whether provided separately
or associated with a Transcend product (“Product”), to the original purchaser of the Product upon or with which the Licensed
Software was installed or associated as of the time of purchase ("Customer") only if Customer accepts all of the terms and
conditions of this Agreement. PLEASE READ THESE TERMS CAREFULLY. USING THE SOFTWARE WILL CONSTITUTE
CUSTOMER'S ACCEPTANCE OF THE TERMS AND CONDITIONS OF THIS AGREEMENT. IF YOU DO NOT AGREE TO THE
TERMS AND CONDITIONS OF THIS AGREEMENT, DO NOT INSTALL OR USE THE LICENSED SOFTWARE.
2. License Grant. Transcend grants to Customer a personal, non-exclusive, non-transferable, non-distributable,
non-assignable, non-sublicensable license to install and use the Licensed Software on the Product in accordance with the terms
and conditions of this Agreement.
3. Intellectual Property Rights. As between Transcend and Customer, the copyright and all other intellectual property rights in
the Licensed Software are the property of Transcend or its supplier(s) or licensor(s). Any rights not expressly granted in this
License are reserved to Transcend.
4. License Limitations. Customer may not, and may not authorize or permit any third party to: (a) use the Licensed Software