TRANSIT Platinum Series User manual

USER’S MANUAL
Model: FSTV-3222P
32" LED TV DVD COMBO
P l a t i n u m S e r i e s

IMPORTANT SAFETY INSTRUCTIONS
Safety Information
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with dry cloth.
Do not block any ventilation openings. Install in accordance with the manufacture’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus
(including amplifiers) that produce heat.
Do not defeat the safety purpose of the polarized or grounding plug. A polarized plug has two
blades with one wider than the other. A grounding plug has two blades and a third grounding
prong. The wide blade or the third prong is provided for your safety. If the provided plug does not
fit into your outlet, consult an electrician for replacement of the obsolete outlet.
Protect the power cord from being walked on or pinched particularly at the plugs, convenience
receptacles, and at the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with
the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus
combination to avoid injury from tip-over.
Unplug the apparatus during lightning storms or when unused for long periods of time.
Refer all servicing to qualified personnel. Servicing is required when the apparatus has been
damaged in any way, such as power supply cord or plug is damaged, liquid has been spilled or
objects have fallen into the apparatus has been exposed to rain or moisture, does not operate
normally, or has been dropped.
CAUTION: These servicing instructions are for use by qualified service personnel only. To reduce
the risk of electric shock, do not perform any servicing other than that contained in the operating
instructions unless you are qualified to do so.
WARNING：To reduce the risk of fire or electric shock, do not expose this apparatus to rain or
moisture. The apparatus shall not be exposed to dripping or splashing and that objects filled with
liquids, such as vases, shall not be placed on apparatus.
WARNING: The mains plug is used as disconnect device, the disconnect device shall
remain readily operable.
- This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the
user to the presence of non-insulated “dangerous voltage” within the product’s enclosure that may
be of sufficient magnitude to constitute a risk of electric shock.
- Warning: To reduce the risk of electric shock, do not remove cover (or back) as there are no user-
serviceable parts inside. Refer servicing to qualified personnel.
- The exclamation point within an equilateral triangle is intended to alert the user to the presence
of important operating and maintenance instructions in the literature accompanying the
appliance.
Apparatus with class I construction shall be connected to socket outlet with a protective
connection.
1

Important Safety Precautions
Do not place the power cord or other cables
across a walkway in case it is trampled on. Do
not overload the power cord or power socket.
When the power plug is used to disconnect and
connect the device, it should easily go into the
power source.
Do not place the LED TV on an unstable
surface.
Do not disassemble the back cover, as it
contains high voltages inside and will cause
electric shock. Only qualified professionals
s h o u l d co n d u c t i n t e r n a l a d j u s t m e n ts ,
maintenance, and checks.
The TV set should not be subjected to
water droplets, vapor, or splash. This
equipment should not be placed on objects
filled with liquids. Do not place flame
sources, such as lit candles, on or near the
LED TV. Please, pull out the power plug
and contact after sales support if there are
abnormal objects or water in the TV.
Pull out the power cord and antenna cable
during electrical storms so the LED TV is not
damaged by electrical surges. Keep all
people away from the antenna cable during
electrical storms.
Important Safety Precautions
Please, immediately pull out the DC power
plug from adapter if there is an abnormal
sound or smell or the LED TV has sound
but no picture, and contact after sales
support.
The LED TV should be kept free from rain,
moisture and dust to prevent electrical
shock and short circuits. Do not cover the
ventilation openings with table clothes,
curtains, newspapers, etc.
The LED TV should be kept from high
temperature heating sources or direct
sunlight. Good ventilation is required.
Allow 10 cm. between the LED TV and
other appliances or built-in cabinet walls.
When you wipe the front cabinet, please
make sure the power plug is pulled out and
use a soft, dry, lint-free cloth and handle it
with care. Do not repeatedly wipe the panel,
nor scrape, tap or strike the panel with a hard
object.
Do not wipe the LED TV with any petrol,
chemical or alcohol based solvents as it
will lead to product damage of the panel
and cabinet.
When the television receiver is not used for an
ext e n ded p erio d o f t i me, i t i s a d visa b l e t o
disconnect the DC power cord from the DC outlet.
32

Content
54
TV Specifications
FSTV-3222P
Remarks:
PAL/NTSC
antenna socket 75Ω
50W
Color LED display
o
0C-35C
o
Power supply
1920X1080
Model
Average Power Consumption
The above listed specifications and data are subject to change without prior notice.
Video input Format
Antenna input
DC 12V 6A
Safety Information
Content
TV Specifications
Accessories
OverviewofBackPanel
Remote Control Unit
Menu Operation
Home
Media Menu Operations
DVD
Troubleshooting
1
4
5
6
8
9-10
13-19
20
21
22-23
24
Important Safety Precautions 2-3
Main Unit 7
General Description 11
BOOT WIZARD 12
x x inch 28.8 7.5 18.9
4.2 Kg

76
Accessories
Please make sure the following items are included with your LED TV.
If any items are missing, contact your dealer.
Remote Control
Main Unit
Manual
Instruction
Batteries (AAAx 2)
110V Adaptor
Power Cord
12V Accessory Plug
CH+/-
Press to change channels.
In the on-screen menu, use the CH +/-
buttons as up/down arrow buttons.
VOL+/-
Press to increase or decrease the volume.
In the on-screen menu, use the VOL +/-
buttons as left/right arrow buttons.
POWER /
Press POWER button to toggle between
normal and standby mode.
PLAY
Play/stop DVD (in DVD mode).
EJECT
Eject DVD.
SPEAKER
REMOTE CONTROL SENSOR
POWER INDICATOR
Green: In power on mode.
Red: In standby mode.
MENU
Press to see an on-screen menu of your
TV's features.
SOURCE
Toggles between all the available input
TV's features.
VOL+ VOL-
CH+ / CH- /
SOURCE
MENU
POWER
8
5
4
7
6

2
1
3
4
5
6
7
9 10
8
12
11
13
16
17
15
20
21
23
24
14
18
19
22
25
98
Overview of back panel Remote Control Unit
Assembling Stand Process
Note: The product and illustrations in this user's manual is only for explanation
purposes and may vary depending on model.
1. POWER: Turn the TV on and off.
2. INPUT: This button is used to switch among different
sources, Select a source and press ENTER button to
confirm.
3. Digital Buttons(0-9, •): Directly select channel with
digital buttons.
4. RECALL: Switch to the previous program.
5. YouTube: If network is available, press this key to
view YouTube directly.
6.CC/SUBTLTLE: In DTV mode, press this button to
switch Close Caption on/off. In ATV mode, press this
button to switch Close Caption type. In USB mode, press
this button to switch subtitles when movie is playing.
7. HOME: Press it to go to App home page.
8. NETFLIX: If network is available, press this key to
view NETFLIX directly.
9. Q.MENU: Press this key to go to quick menu.
10. MENU: Display the main menu or exit the current
menu.
11. ENTER/ LIST: Validation key.
Press it to show channel list and favorite list on screen.
12. Arrow buttons ◄►▲▼: Use to select on-screen
menu items and change menu values.
13. BACK: Return.
14. EXIT: Exit the menu.
15. COLOR BUTTONS: Used in the EPG or Program
Edit menu.
ANGLE: DVD ANGLE setup.
LANGUAGE: DVD audio language setup.
D.MENU: Quick navigation during Teletext or setup
settings / DVD: Video DVD Menu button.
SETUP: DVD system setup.
D.DISP: Quick navigation during Teletext or setup
settings / DVD: DVD Information button.
16. VOL+/-: Press these buttons to adjust the volume.
Side port Port
Camcorder DVDPlayer PC(HDMI-output) Blu-ray disc player
Headset
POWER
DC 12V
Digital Audio System
SPDIF
OUT
HDMI2
RJ45 R L
AUDIO
OUT
DVD Player
MINI AV
IN COAX/RF
USB
USB
EARPHONE
OUT
HDMI1
Instruction:
1.Place the TV unit on a flat and clean table.
2.Fix stand by 2 pcs screws via screw hole B and A.
3.Fix stand by 2 pcs screws via screw hole D and C.
Screw hole B
Screw hole A
Screw hole D
Screw hole C
Screw

1110
Remote Control Unit
Installing Batteries in the Remote Control
Point the remote towards the remote
control sensor of the wireless TV and
use it within 7 meters.
Put the used batteries into the recyc-
ling bin since it can negatively affect
the environment.
General Description
Installing Batteries
1Open the battery compartment
cover on the back side.
2Insert two 1.5V AAA size batteries in
correct polarity. Don´t mix old or used
batteries with new ones.
3Closed the cover.
Battery
Cover
2xsize AAA 1.5V
Battery
Cover
Antenna connection
Antenna input impedance of this unit is 75ohm. VHF/UHF 75ohm coaxial cable can be
connected to the antenna jack directly, if the antenna cable is 300ohm parallel flat feeder
cable, you need to use the 300ohm/75ohm converter to connect the antenna cable to the
antenna jack. For details Please refer to the following drawing.
Use a 75ohm - 300ohm converter
300ohm coaxial cable
Antenna feeder
ANT IN
75ohm coaxial cable
Antenna cable
Antennas with 300ohm flat twins Leads Antennas with 75ohm Round Leads
External Connection
The battery (battery or batteries or battery pack) should not be
exposed to excessive heat such as sunshine, fire or the like.
17. MUTE: Press this button to shut off the sound of
the TV set temporarily, press again to resume.
18. MTS/AUDIO: In USB mode, press this button to
switch audio track when movie is playing. In TV
mode, press this button to switch MTS or Audio
Language.
TV/DVD: Press this key to go to quick TV, Press
again this key to go to quick DVD.
A-B: Press the A-B button once to set point A. Press
the A-B button a second time to set point B. After
setting the program repeat playing from A to B.
Pressing the A-B button a third time will cancel
the repeat.
19. CH▲/▼: Press these buttons to change
channel upward or downward.
20. DIGITAL MEDIA PLAYER CONTROL BUTTON:
Include play/pause, stop, previous, next, backward,
forward is used in USB mode. No record function.
Please refer to relevant instructions in the section
for multimedia player.
21. INFO: Display the program information.
22.DVD TITLE: Press this button to return to the
title of the disc.
23. PRIME VIDEO: If network available, press this
to open and view amazon prime video directly.
24. PANDORA: Press PANDORA key to enter
PANDORA application.
25. : Open/close in DVD mode.
2
1
3
4
5
6
7
9 10
8
12
11
13
16
17
15
20
21
23
24
14
18
19
22
25
Suitable mobile antennas available from Free Signal TV.

1312
BOOT WIZARD Menu Operation
HOME
Press the “HOME” button menu, Up and down direction buttons can be used for selections,
Press the left or right button to select the corresponding input source, and press
he Enter button to enter.
Press the “menu” button to display the menu, press the up and down keys to select
the appropriate settings, press the right button to enter the relevant settings.
The Startup Wizard menu contains language settings and network settings.
Language settings, you can set the TV operating language; network settings,
you can set according to the connection, wireless network settings WIFI connection,
wired connection is to set the local area network.
23
Picture Mode
Use the menu button to call up the menu, then right click to select the "Image Mode" option,
press the left and right button to switch the image mode to Movie / Sport / Vivid / Brighter /
Standard.
Backlight
Adjust the backlight brightness value to change the backlight brightness.
Color temperature
Select the "Color Temperature" option according to the method mentioned above,
and then use the left and right keys to adjust the color temperature to cool /
normal / warm.
Aspect Ratio
You can select 4:3, 16:9, Movie or Subtitle.
Noise Reduction
Press up/down key to select "Noise Reduction" option. Press left/right key to
select "Off", "Low", "Medium", "High" and "Auto” to improve the picture sharpness.
2
4
1
3
7
56
8

1514
Menu Operation Menu Operation
Press the “menu” button to display the menu, press the up and down keys to select
the appropriate settings, press the right button to enter the relevant settings.
Press the “menu” button to display the menu, press the up and down keys to select
the appropriate settings, press the right button to enter the relevant settings.
Sound mode
Use the up and down keys to select the sound menu, then press the right button to
select the “Sound Mode” option, press the left and right button to switch the sound
mode to User/Standard/Vivid/Sports/Movie/Music/News.
Balance
If the volumes of the left speaker and the right speaker are not the same, you can
adjust the "Balance" to suit your personal preference.
Auto Volume Limit
Press the ENTER function on or off.
Surround Sound
Press the ENTER function on or off.
Dolby Audio Process
Press the ENTER function on or off.
Dialogue Enhancement
press the left and right button to switch the to Off/Low/Medium/High.
Digital Output Mode
This is used to convert the digital output mode. There are Auto, PCM,
Trans-code Dolby Digital, Trans-code Dolby Digital Plus options.
Audio Type
This is used to convert the audio output mode. There are Normal, Hearing Impaired,
Audio Description options.
Audio Delay
Press the right button to enter the relevant settings.
Language
Select Audio Language Setting to enter the audio selection list, to choose Dolby and other
sound effects. Audio Language can switch the first audio language through the left and right
direction keys, the default is English. Second Audio Language can switch the second audio
language through the left and right direction keys, the default is English.
OSD Time
Press the "menu display time" option, through the up and down direction keys.
Link Setup
Press the ENTER function on or off.
Time
Press the ENTER function on or off.
Bluetooth
Press the "ENTER" Key enter, through the up and down direction keys can be selected.
Close Caption
Press the ENTER function on or off.
TTS
Press the ENTER function on or off.
TV Mode
Press the "ENTER" Key enter, and the up and down direction keys can be selected.
Reset
Press left and right keys to choose to confirm or cancel, or select to confirm the television
will restart, The menu will restore the initial data, or choose to cancel, or back to the menu
interface.

1716
Menu Operation Menu Operation
Choose the option to Lock System with the up and down keys .Then open the lock
function with left and right keys. Please remember that initial password is 0000.If
you want to adjust password, you first should select option to set password and
then input old password, new password. When new password is input again and
correct, make sure above operation successfully reset password. When you want to
shield some programs you don’t like, please select the option to block program and
input the channel number.
Press the “menu” button to display the menu, press the up and down keys to select
the appropriate settings, press the right button to enter the relevant settings.
Press the “menu” button to display the menu, press the up and down keys to select
the appropriate settings, press the right button to enter the relevant settings.
Tuner Mode
Press the "ENTER" Key, use the up and down direction keys to select.
Auto Tuning
Press the "ENTER" Key, use the up and down direction keys to select.
DTV Manual Tuning
ATV Manual Tuning
To simulate manual search, select the Channel you need to store. Press the up and down
keys to select the “Search” option, press the left and right button to search, and you can
modify the frequency by fine tuning , choose the best frequency.

1918
Menu Operation Menu Operation
Press the “menu” button to display the menu, press the up and down keys to select
the appropriate settings, press the right button to enter the relevant settings.
Press the “menu” button to display the menu, press the up and down keys to select
the appropriate settings, press the right button to enter the relevant settings.
Enter the "Network" menu item "Wi-Fi", to open or close the Wi-Fi connection function,
There are 4 types of connection: select and enter the password in the list of connections,
or use without-password protected connection, or manually add name to connect,
plus point-to-point direct connection. For an Ethernet connection, insert the network cable
into the network cable interface, and after identifying the network, the current ipv4 and
ipv6 addresses will be displayed. Select Proxy Settings to set the proxy. IP settings can
set the same way to get the ip address. There are automatic acquisition or static ip
address options.
You can view and set the relevant information for the OTA update. You can also view
the model, Android version, version number information.

2120
Home
(The main page is designed with Zeasn UI, divided into: latest news, Featured APP,
applications, music, sports.)
*Different regions will receive different content.
Media Menu Operations
Music
Use the up and down keys to select the "Audio" icon, press the confirmation button to confirm,
and then press right to the folder, press the confirmation button to open the appropriate folder.
After selecting the Audio, press the confirmation button to open the Audio. Choices are
available through the left and right buttons.
Video
Use the up and down buttons selected "Video" icon, press the confirmation button to confirm,
and then press right to the folder, press the confirmation button to open the appropriate folder.
After selecting the Video, press the confirmation button to open the Video, Choices are
available through the left and right buttons.
Photo
Through the up and down buttons select "Photo" icon, press the confirmation key to confirm,
then press right to the folder, press the confirmation key to open the corresponding folder.
After the selection of the Photo, press the confirmation button to open the Photo, Choices are
available through the left and right buttons.
HOME
Press the “HOME” button menu. The up and down direction keys can be selected, or
Press the left or right button to select the corresponding input source, and press the Enter
button to enter.
HOME
Press the “HOME” button menu. The up and down direction keys can be selected, or
Press the left or right button to select the corresponding input source, and press the Enter
button to enter.

2322
DVD
HOME
Press the “HOME” button menu. The up and down direction keys can be selected, or
Press the left or right button to select the DVD, and press the Enter button to enter.
Press the DVD SETUP button to enter that function.
TV SYSTEM
Set the options: NTSC/PAL/AUTO.
POWER RESUME
Press the ENTER function on or off.
TV TYPE
Set the screen ratio options: PS(4:3 Pan Scan), Normal/PS(4:3 Letter Box),
and Wide (16:9)the default setting is wide.
PASSWORD
Enter “0000” to enter.
RATING
Disc Options.
DEFAULT
This option will return the DVD to its factory default settings.
OSD LANGUAGE
Set the OSD Language options.
AUDIO LANG
DVD language selection options.
SUBTITLE LANG
This player can display DVD subtitle languages if supported by the DVD disc. When playing
DVD’s you can hide the subtitle or choose any of them as the current subtitle language.
MENU LANG
Set the MENU Language options.
AUDIO OUT
Press the "ENTER" Key. The up and down direction keys can be used for selection.
KEY
Press the "ENTER" Key. The up and down direction keys can be used for selection.
DUAL MONO
Press the "ENTER" Key. The up and down direction keys can be used for selection.
DVD

Troubleshooting
24
Questions? Comments? Assistance?
Please contact us!
Sales@Free Signal.TV
PH: 859-250-9538
1512-D Resource Drive
Burlington, KY 41091
www.FreeSignal.TV
THE LEADER IN ADVANCED ENTERTAINMENT
SOLUTIONS

FCC Warning
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any inte rference received, including interference that may cause undesired operation.
Changes or modifications not expressly approved by the party responsible for compliance could
void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interferenceto radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and receiver.
•Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•Consult the dealer or an experienced radio/TV technician for help.
Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled
environment. This equipment should be installed and operated with minimum distance 20cm
between the radiator and your body.